AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

199-3780 STARTING AID GP -AIR INLET HEATER 24-VOLT. PROVIDES RELAY SWITCH FOR USE WITH AIR INLET HEATER/SOLENOID, MID MOUNT FUEL FILTER BASE AN ATTACHMENT C7


ELECTRICAL AND STARTING SYSTEM
STARTING AID GP
STARTING MOTOR GP

INDUSTRIAL ENGINE C7 INDUSTRIAL ENGINE JTF
 C7 Industrial Engine JTF00001-UP SEBP4436 C7 JTF   (2005)

ELECTRICAL AND STARTING SYSTEM

STARTING AID GP
STARTING AID GP
118-7284 STARTING AID GP
STARTING AID GP
199-3780 STARTING AID GP
STARTING AID GP
201-8436 STARTING AID GP
STARTING AID GP
242-7250 STARTING AID GP
STARTING AID GP
4P-1479 STARTING AID GP
 

#SEBP44360820
 

199-3780: STARTING AID GP

199-3780 STARTING AID GP -AIR INLET HEATER
24-VOLT. PROVIDES RELAY SWITCH
FOR USE WITH AIR INLET HEATER/SOLENOID, MID MOUNT FUEL FILTER BASE
AN ATTACHMENT
i02546971 SEBP4436
1993780 STARTING AID GP Parts scheme
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 C [1] STRAP-CABLE  
2. 7S-6369 [1] WASHER (0.344X0.75X0.188-IN THK)  
3. 195-1306 [1] STRAP-GROUNDING  
4. 236-6235 C [1] CABLE AS  
  6V-9023 E TUBE-HEAT SHRINK (12.7-MM DIA)(3-CM)  
  135-2543 [2] BOOT (RED)  
5. 283-1228 C [1] BRACKET AS  
6. 208-9277 CM [2] BOLT-FLANGE HEAD (M6X1X20-MM)  
7. 398-0940 CY [1] SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)  
8. 4P-8134 [1] CLIP (LADDER)  
9. 6V-5218 M [1] BOLT (M8X1.25X35-MM)  
10. 8T-4970 M [2] BOLT (M6X1X14-MM)  
11. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
12. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44360821
 

201-8436: STARTING AID GP

201-8436 STARTING AID GP -AIR INLET HEATER
12 VOLT. PROVIDES RELAY SWITCH
FOR USE WITH AIR INLET HEATER, MID MOUNT FUEL FILTER BASE
AN ATTACHMENT
i02577727 SEBP4436
2018436 STARTING AID GP Parts scheme
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 C [1] STRAP-CABLE  
2. 7S-6369 [1] WASHER (0.344X0.75X0.188-IN THK)  
3. 195-1306 [1] STRAP-GROUNDING  
4. 236-6235 C [1] CABLE AS  
  6V-9023 E TUBE-HEAT SHRINK (12.7-MM DIA)(3-CM)  
  030-1712 [1] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
  135-2543 [2] BOOT (RED)  
5. 283-1228 C [1] BRACKET AS  
6. 208-9277 CM [2] BOLT-FLANGE HEAD (M6X1X20-MM)  
7. 209-5581 CY [1] SWITCH GP-MAGNETIC (12-VOLT)(AIR INLET HEATER)  
8. 4P-8134 [1] CLIP (LADDER)  
9. 6V-5218 M [1] BOLT (M8X1.25X35-MM)  
10. 8T-4970 M [2] BOLT (M6X1X14-MM)  
11. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
12. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44360822
 

242-7250: STARTING AID GP

242-7250 STARTING AID GP
AIR INLET HEATER
PART OF 467-0262, 487-2859, 487-5744, 569-1223 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02052092 SEBP4436
2427250 STARTING AID GP Parts scheme
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 4P-5918 [1] CLIP  
4. 195-1306 [1] STRAP-GROUNDING  
5. 214-1048 [2] SPACER (8.8X16X4-MM THK)  
6. 267-4211 [3] SPACER (8.8X16X15-MM THK)  
7. 397-6079 [1] PLATE  
8. 398-0939 Y [1] SWITCH GP-MAGNETIC (12 VDC)  
9. 284-0761 M [2] BOLT (M6X1X12-MM)  
10. 3E-4352 [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
11. 415-7171 [1] CABLE AS  
  6V-9023 E TUBE-HEAT SHRINK (12.7-MM DIA)(3-CM)  
  030-1712 [1] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
  135-2543 [1] BOOT (RED)  
12. 4P-8134 [1] CLIP (LADDER)  
13. 6V-3918 M [3] BOLT (M8X1.25X50-MM)  
14. 6V-5192 M [1] BOLT-SOCKET HEAD (M8X1.25X30-MM)  
15. 6V-5218 M [1] BOLT (M8X1.25X35-MM)  
16. 7S-6369 [1] WASHER (0.344X0.75X0.188-IN THK)  
17. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
18. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44360823
 

4P-1479: STARTING AID GP

4P-1479 STARTING AID GP -AIR INLET HEATER
12-VOLT. TUNED INLET
PART OF 467-0262, 487-2859, 487-5744, 569-1223 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i00373713 SEBP4436
4P1479 STARTING AID GP Parts scheme
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-4911 [1] HEATER AS (STARTING AID)  
2. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  5C-2890 M [2] NUT (M6X1-THD)  
  1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP44360824
 

273-3298: STARTING AID GP-ETHER

273-3298 STARTING AID GP-ETHER
24-VOLT
AN ATTACHMENT
i02676256 SEBP4436
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  239-1134 Y [1] VALVE GP-ETHER STARTING (24-VOLT)  
   
  251-4345 [1] ATOMIZER GP-ETHER  
  236-4545 [1] NUT-SLEEVE (5/16-24-THD)  
   
  7N-2059 [1] CLAMP AS (CYLINDER)  
  389-3687 [1] CONNECTOR AS  
  9T-6635 [1] PLUG  
  238-5080 [1] SEAL-O-RING  
  241-4194 [1] FITTING AS (CONTROL)  
  7N-0140 [1] TUBE AS-COIL  
   
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2V-1713 [1] TAG-NOTICE (STARTING AID)  
  8N-3536 [1] TUBE-STEEL  
  5P-5623 BD WIRE-ELECTRICAL (16-GA, BLACK)  
   
  7N-0296 A [1] CYLINDER AS-ETHER  
    (MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBP44360825
 

290-9760: STARTING AID GP-ETHER

290-9760 STARTING AID GP-ETHER
12-VOLT
AN ATTACHMENT
i02604727 SEBP4436
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  239-1134 Y [1] VALVE GP-ETHER STARTING (24-VOLT)  
  7X-6101 [1] ATOMIZER GP-ETHER  
  236-4545 [1] NUT-SLEEVE (5/16-24-THD)  
  7N-2059 [1] CLAMP AS (CYLINDER)  
  241-4194 [1] FITTING AS (CONTROL)  
  236-4545 [1] NUT-SLEEVE (5/16-24-THD)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  389-3687 [1] CONNECTOR AS  
  9T-6635 [1] PLUG  
  238-5080 [1] SEAL-O-RING  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2V-1713 [1] TAG-NOTICE (STARTING AID)  
  7N-0140 [1] TUBE AS-COIL  
  8N-3536 [1] TUBE-STEEL  
   
  7N-0296 A [1] CYLINDER AS-ETHER  
    (MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER)
  A   NOT PART OF THIS GROUP
  Y   SEPARATE ILLUSTRATION
 

#SEBP44360826
 

292-0029: STARTING AID GP-ETHER

292-0029 STARTING AID GP-ETHER
12-VOLT
FOR USE WITH @@@@@155-4910@@@@@, @@@@@162-1555@@@@@
AN ATTACHMENT
i02604732 SEBP4436
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  260-1844 Y [1] VALVE GP-ETHER STARTING (12-VOLT)  
  7X-6101 [1] ATOMIZER GP-ETHER  
  7N-2059 [1] CLAMP AS (CYLINDER)  
  389-3687 [1] CONNECTOR AS  
  9T-6635 [1] PLUG  
  238-5080 [1] SEAL-O-RING  
  241-4194 [1] FITTING AS (CONTROL)  
  236-4545 [1] NUT-SLEEVE (5/16-24-THD)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2V-1713 [1] TAG-NOTICE (STARTING AID)  
  7N-0140 [1] TUBE AS-COIL  
  8N-3536 [1] TUBE-STEEL  
   
  7N-0296 A [1] CYLINDER AS-ETHER  
    (MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER)
  A   NOT PART OF THIS GROUP
  Y   SEPARATE ILLUSTRATION
 

#SEBP44360827
 

300-1606: STARTING AID GP-ETHER

300-1606 STARTING AID GP-ETHER
12-VOLT
FOR USE WITH @@@@@137-5182@@@@@, @@@@@151-0863@@@@@
AN ATTACHMENT
i02604872 SEBP4436
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  260-1844 Y [1] VALVE GP-ETHER STARTING (12-VOLT)  
  7T-7624 [1] ATOMIZER GP-ETHER  
  7N-2059 [1] CLAMP AS (CYLINDER)  
  241-4194 [1] FITTING AS (CONTROL)  
  236-4545 [1] NUT-SLEEVE (5/16-24-THD)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  9T-6635 [1] PLUG  
  3K-0360 [1] SEAL-O-RING  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2V-1713 [1] TAG-NOTICE (STARTING AID)  
  7N-0140 [1] TUBE AS-COIL  
  8N-3536 [1] TUBE-STEEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP44360828
 

300-1607: STARTING AID GP-ETHER

300-1607 STARTING AID GP-ETHER
24-VOLT
FOR USE WITH @@@@@137-5182@@@@@, @@@@@151-0863@@@@@
AN ATTACHMENT
i02604873 SEBP4436
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  239-1134 Y [1] VALVE GP-ETHER STARTING (24-VOLT)  
  7T-7624 [1] ATOMIZER GP-ETHER  
  7N-2059 [1] CLAMP AS (CYLINDER)  
  241-4194 [1] FITTING AS (CONTROL)  
  236-4545 [1] NUT-SLEEVE (5/16-24-THD)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  9T-6635 [1] PLUG  
  3K-0360 [1] SEAL-O-RING  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2V-1713 [1] TAG-NOTICE (STARTING AID)  
  7N-0140 [1] TUBE AS-COIL  
  8N-3536 [1] TUBE-STEEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP44360829
 

261-1551: STARTING MOTOR GP-AIR

261-1551 STARTING MOTOR GP-AIR
AN ATTACHMENT
i02863848 SEBP4436
2611551 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-3410 [1] VALVE AS-CONTROL (STARTING)  
  2W-0629 [1] KNOB-ENGINE START  
2. 155-8725 [1] GASKET  
3. 189-7530 I [1] HOSE AS  
4. 189-7723 I [1] HOSE AS  
5. 246-3282 [1] VALVE-RELAY  
6. 261-1552 Y [1] STARTING MOTOR GP-AIR  
7. 261-1553 [1] BRACKET AS  
8. 176-2543 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
9. 3B-6552 [1] ELBOW-PIPE  
10. 3B-6556 [1] ELBOW-STREET  
11. 3B-7263 [1] NIPPLE-PIPE  
12. 4B-4609 [1] NIPPLE-PIPE  
13. 6K-1972 [1] ELBOW-FLARED  
14. 5C-2890 M [2] NUT (M6X1-THD)  
15. 5P-2547 [3] BOLT-12 POINT HEAD (7/16-14X1-IN)  
16. 6V-4245 [1] ELBOW  
17. 8C-7530 M [1] U-BOLT (M6X1X25-MM)  
18. 8L-6557 [1] CONNECTOR (FLARED)  
19. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
20. 4S-6399 [2] CONNECTOR (FLARED)  
21. 7X-7730 J [1] PLUG-PIPE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   SHIPPING & STORAGE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Inspection Procedure for Air Inlet Heater Solenoid and Air Inlet Heater Assembly{1090, 7499}
Inspection Procedure for Air Inlet Heater Solenoid and Air Inlet Heater Assembly{1090, 7499}
Troubleshooting
Ether Starting Aid - Test
C7 and C9 Industrial Engines
Disassembly and Assembly
Air Inlet Heater - Remove and Install
C7 Industrial Engines

Caterpillar Parts SIS Catalog C7 :

STARTING AID GP
118-7284 STARTING AID GP
SILENCER-AIR STARTING
138-2544 SILENCER-AIR STARTING
SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
229-9985 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
STARTING AID GP
201-8436 STARTING AID GP
STARTING AID GP
242-7250 STARTING AID GP
STARTING AID GP
4P-1479 STARTING AID GP
273-3298 STARTING AID GP-ETHER
290-9760 STARTING AID GP-ETHER
292-0029 STARTING AID GP-ETHER
300-1606 STARTING AID GP-ETHER
300-1607 STARTING AID GP-ETHER
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.