AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1L-5011 VALVE GP-AIR STARTING REQUIRED WHEN AIR SUPPLY PRESSURE EXCEEDS 1034 KPA. REGULATING AND PRESSURE REDUCING FOR USE WITH AIR STARTING MOTOR AN ATTACHMENT C7


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
STARTING AID GP
WIRING GP

INDUSTRIAL ENGINE C7 INDUSTRIAL ENGINE JTF
 C7 Industrial Engine JTF00001-UP SEBP4436 C7 JTF   (2005)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
442-8946 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
7W-8759 STARTING MOTOR GP-ELECTRIC
VALVE GP-AIR STARTING
1L-5011 VALVE GP-AIR STARTING
 

#SEBP44360870
 

1L-5011: VALVE GP-AIR STARTING

1L-5011 VALVE GP-AIR STARTING
REQUIRED WHEN AIR SUPPLY PRESSURE EXCEEDS 1034 KPA. REGULATING AND PRESSURE REDUCING
FOR USE WITH AIR STARTING MOTOR
AN ATTACHMENT
i00351962 SEBP4436
1L5011 VALVE GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-9048 [1] NUT-PLATED JAM (7/16-14-THD)  
2. 1H-9569 [1] BUTTON-SPRING  
3. 1L-9049 [1] SPRING-PRESSURE  
4. 1L-9060 [1] BUTTON  
5. 1H-9572 [1] PLATE-PRESSURE  
6. 1L-9064 [1] PISTON AS  
7. 7L-8705 [1] CYLINDER  
8. 1L-9067 [1] SPRING-PISTON  
9. 1H-9580 [1] GASKET-PLUG  
10. 1L-9069 [1] PLUG AS  
11. 1L-9066 [1] SCREEN-STRAINER (AIR STARTING VALVE)  
12. 1L-9063 [1] DIAPHRAGM  
13. 1L-9068 [1] BODY-VALVE  
14. 1L-9062 [6] BOLT (3/8-24X1.5-IN)  
15. 1L-9059 [1] HOUSING-SPRING  
16. 0T-0320 C [1] BOLT (7/16-14X1.25-IN)  
   
  1B-4203 F [6] NUT-FULL (3/8-24-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
 

#SEBP44360871
 

239-1134: VALVE GP-ETHER STARTING

239-1134 VALVE GP-ETHER STARTING
24-VOLT, CONTINUOUS
PART OF 273-3298, 290-9760, 300-1607 STARTING AID GP-ETHER
AN ATTACHMENT
i02052285 SEBP4436
2391134 VALVE GP-ETHER STARTING Parts scheme
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9801 [1] GASKET  
2. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 358-4889 [1] FILTER (ETHER START)  
 

#SEBP44360872
 

260-1844: VALVE GP-ETHER STARTING

260-1844 VALVE GP-ETHER STARTING -12-VOLT
STARTING AID
PART OF 292-0029, 300-1606 STARTING AID GP-ETHER
AN ATTACHMENT
i02265141 SEBP4436
2601844 VALVE GP-ETHER STARTING Parts scheme
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 358-4889 [1] FILTER (ETHER START)  
2. 7N-9801 [1] GASKET  
3. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
4. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
 

#SEBP44360873
 

281-9191: WIRING GP-ELECTRONIC CONTROL

281-9191 WIRING GP-ELECTRONIC CONTROL
PART OF 467-0260, 467-0262, 485-2983 ENGINE AR-COMPLETE
CANNOT BE USED WITH J1939 PANEL
ALSO AN ATTACHMENT
i02503961 SEBP4436
2819191 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6443 [1] CAP-CONNECTOR  
2. 3S-2093 [3] STRAP-CABLE  
3. 131-5526 Y [1] FASTENER GP-WIRING HARNESS  
4. 221-5423 [1] BRACKET  
5. 373-2789 Y [1] HARNESS AS-CONTROL  
6. 4B-5324 [4] WASHER (3.9X9.6X1.2-MM THK)  
7. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
8. 6V-2317 M [1] BOLT (M8X1.25X30-MM)  
9. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
10. 6V-8801 [4] NUT (3/8-16-THD)  
11. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
13. 9X-6258 [4] SCREW-MACHINE (6-32X0.5-IN)  
14. 373-2790 [1] BRACKET  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44360874
 

480-7728: WIRING GP-ELECTRONIC CONTROL

480-7728 WIRING GP-ELECTRONIC CONTROL
S/N TEF1-UP
PART OF 467-0260, 467-0262 ENGINE AR-COMPLETE
Type 1
i06513108 SEBP4436
4807728 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [14] STRAP-CABLE  
2. 4P-5918 [1] CLIP  
3. 198-2713 Y [1] HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)  
4. 222-5917 Y [1] HARNESS AS-ENGINE (FUEL INJECTION)  
5. 113-8690 [1] WASHER (11.1X37.9X3.3-MM THK)  
6. 156-9890 [1] WASHER (9X30X4-MM THK)  
7. 206-1345 [9] STRAP-CABLE  
8. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
9. 6V-5217 M [1] BOLT (M8X1.25X20-MM)  
10. 6V-8212 M [1] BOLT (M10X1.5X16-MM)  
11. 7X-7729 [1] WASHER (11X25X3-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44360875
 

480-7728: WIRING GP-ELECTRONIC CONTROL

480-7728 WIRING GP-ELECTRONIC CONTROL
S/N TEF1-UP
PART OF 467-0260, 467-0262 ENGINE AR-COMPLETE
Type 2
i07110463 SEBP4436
4807728 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 4P-5918 [1] CLIP  
3. 105-1797 [2] MOUNT  
4. 198-2713 Y [1] HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)  
5. 519-5559 C [1] CLIP  
6. 520-1511 CY [1] HARNESS AS-ENGINE (FUEL INJECTOR)  
7. 113-8690 [1] WASHER (11.1X37.9X3.3-MM THK)  
8. 156-9890 [1] WASHER (9X30X4-MM THK)  
9. 206-1345 [7] STRAP-CABLE  
10. 3E-4352 C [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
11. 3E-4353 C [1] WASHER-HARD (11X25X3-MM THK)  
12. 6V-5217 M [1] BOLT (M8X1.25X20-MM)  
13. 6V-8212 M [1] BOLT (M10X1.5X16-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44360876
 

508-9455: WIRING GP-ELECTRONIC CONTROL

508-9455 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT
i07477820 SEBP4436
5089455 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6443 [1] CAP-CONNECTOR (M5X0.8-THD)  
2. 3S-2093 [5] STRAP-CABLE  
3. 131-5526 Y [1] FASTENER GP-WIRING HARNESS  
4. 221-5423 [1] BRACKET  
5. 373-2790 [1] BRACKET  
6. 502-0888 Y [1] HARNESS AS-CONTROL  
7. 165-3929 [1] BOLT (3/8-16X1.5-IN)  
8. 4B-5324 [4] WASHER (3.9X9.6X1.2-MM THK)  
9. 4P-8134 [1] CLIP (LADDER)  
10. 6V-2317 M [1] BOLT (M8X1.25X30-MM)  
11. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
12. 6V-8801 [4] NUT (3/8-16-THD)  
13. 8T-2502 [1] BOLT (3/8-16X1.125-IN)  
14. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
16. 9X-6258 [4] SCREW-MACHINE (6-32X0.5-IN)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44360877
 

195-0131: WIRING GP-ENGINE

195-0131 WIRING GP-ENGINE -REMOTE MOUNTED ECM
FOR USE WITH 24-VOLT WIRING SYSTEM
AN ATTACHMENT
i01391516 SEBP4436
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  194-4613 [1] HARNESS AS-WIRING (CONTROL PANEL)  
  8T-9834 [1] PLUG AS-CONNECTOR (40-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8557 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3132 [2] SEAL-CONNECTOR (40-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)(WIRING HARNESS)  
    (INCLUDES PLUG AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)(WIRING HARNESS)  
    (INCLUDES PLUG AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)(WIRING HARNESS)  
    (INCLUDES PLUG AS & WEDGE)
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)(WIRING HARNESS)  
    (INCLUDES PLUG AS & WEDGE)
  8N-1542 [1] PIN-CONNECTOR (10-GA)  
  127-5485 [1] PLUG AS-CONNECTOR (1-PIN)  
  127-5486 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  8N-1543 [1] SOCKET-CONNECTOR (10-GA)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  186-3736 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2L-8066 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  2L-8081 [2] TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)  
  2L-8071 [1] TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)  
  155-2263 [1] WEDGE-PLUG LOCK (6-PIN)  
  5P-5624 D WIRE (14-GA, BLACK)(5-M)  
  5P-5622 D WIRE (10-GA, BLACK)(5-M)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP44360878
 

198-2714: WIRING GP-ENGINE

198-2714 WIRING GP-ENGINE
AN ATTACHMENT
i02194626 SEBP4436
1982714 WIRING GP-ENGINE Parts scheme 1982714 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [14] STRAP-CABLE  
2. 4P-5918 [1] CLIP  
3. 105-1797 [2] MOUNT  
4. 198-2713 Y [1] HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)  
5. 206-1345 [7] STRAP-CABLE  
6. 519-5559 [1] CLIP  
7. 520-1511 Y [1] HARNESS AS-ENGINE (FUEL INJECTOR)  
8. 4P-8134 [1] CLIP (LADDER)  
9. 6V-2317 M [1] BOLT (M8X1.25X30-MM)  
10. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44360879
 

235-5267: WIRING GP-ENGINE

235-5267 WIRING GP-ENGINE
DOES NOT INCLUDE WIRING FOR AIR INLET HEATER
AN ATTACHMENT
i02147634 SEBP4436
2355267 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your C7 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [7] STRAP-CABLE  
2. 8T-8737 [2] PLUG-SEAL  
3. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)  
  1H-3244 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 232-4609 [1] CABLE AS (BATTERY POSITIVE)  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  8N-0869 [1] COVER-TERMINAL (RED)  
  8N-1541 [1] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  8N-1725 [1] COVER AS-TERMINAL (RED)  
  129-7163 [1] PLUG AS-CONNECTOR (1-PIN)  
  159-8049 E CABLE (00-GA, RED)(189-CM)  
5. 232-4610 [1] CABLE AS (BATTERY NEGATIVE)  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  7N-5274 [1] COVER AS-TERMINAL (BLACK)  
  8N-1541 [1] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  9G-8909 [1] COVER-TERMINAL (BLACK)  
  129-7163 [1] PLUG AS-CONNECTOR (1-PIN)  
  159-8050 E CABLE (00-GA, BLACK)(189-CM)  
6. 235-5261 [1] CABLE AS  
  2L-0273 [1] FITTING (RUBBER)  
7. 235-5262 [1] CABLE AS  
  2L-0273 [2] FITTING (RUBBER)  
  3T-4688 [1] TERMINAL-RING (4-GA, 7/16-IN SCREW)  
8. 235-5263 [1] CABLE AS  
  5P-5675 D WIRE (6-GA, BLACK)(0.5-M)  
9. 235-5264 Y [1] HARNESS AS-WIRING (BATTERY)  
10. 235-5265 Y [1] HARNESS AS-WIRING (START RELAY)  
11. 235-5269 [1] BRACKET  
12. 030-1193 [2] SCREW-MACHINE (10-32X19.05-MM)  
13. 130-9864 M [2] BOLT (M14X2X25-MM)  
14. 132-5789 [1] CLIP (LADDER)  
15. 277-1873 [1] CLIP (LADDER)  
16. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS. & WEDGE)
17. 3S-8664 [1] CLIP (LOOP)  
18. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
19. 4P-7581 [2] CLIP (LADDER)  
20. 5C-7261 M [2] NUT (M8X1.25-THD)  
21. 7X-0510 [2] WASHER-HARD (15.5X29X3-MM THK)  
22. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
23. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
24. 8W-8909 [1] SLEEVE  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New Seal Improves Starter Durability on Certain Industrial Engines {1453, 7555}
2013/07/25
Operation and Maintenance Manual
Air Tank Moisture and Sediment - Drain - If Equipped
C7 Industrial Engine
Starting Motor - Inspect - If Equipped
C7 Industrial Engine
Starting the Engine
C7 Industrial Engine
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starting Motor
C7 Industrial Engines
Electric Starting Motor
C7 Industrial Engines
Electric Starting Motor
C7 Industrial Engines
Electric Starting Motor
C7 Industrial Engines
Electric Starting Motor
C7 Industrial Engines
Electric Starting Motor
C7 Industrial Engines
Electric Starting Motor
C7 Industrial Engines
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Testing and Adjusting
Pinion Clearance - Adjust
C7 Industrial Engines
Electric Starting System - Test
C7 Industrial Engines
Disassembly and Assembly
Electric Starting Motor - Remove and Install
C7 Industrial Engines

Caterpillar Parts SIS Catalog C7 :

SWITCH GP-TOGGLE
165-5970 SWITCH GP-TOGGLE
3E-0075 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
398-0940 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
398-0939 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
329-1398 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
322-4661 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
241-8372 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
241-8371 SWITCH GP-MAGNETIC
VALVE GP-ETHER STARTING
239-1134 VALVE GP-ETHER STARTING
VALVE GP-ETHER STARTING
260-1844 VALVE GP-ETHER STARTING
WIRING GP-ELECTRONIC CONTROL
281-9191 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
480-7728 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
480-7728 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
508-9455 WIRING GP-ELECTRONIC CONTROL
195-0131 WIRING GP-ENGINE
WIRING GP-ENGINE
198-2714 WIRING GP-ENGINE
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.