ELECTRICAL AND STARTING SYSTEM
WIRING GPHARNESS GP
ELECTRONICS GP-COMMUNICATION
ELECTRONICS GP-MACHINE
LIGHTING GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP44420200
259-5294: FASTENER GP-WIRING HARNESS
259-5294 FASTENER GP-WIRING HARNESS -FOOT SWITCH
S/N T2S1-UP
PART OF 255-5846 CONTROL AR-AUXILIARY
AN ATTACHMENT
S/N T2S1-UP
PART OF 255-5846 CONTROL AR-AUXILIARY
AN ATTACHMENT
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS#SEBP44420201
259-5295: FASTENER GP-WIRING HARNESS
259-5295 FASTENER GP-WIRING HARNESS -JOYSTICK
S/N T2S1-UP
PART OF 270-5688 CONTROL & MTG GP-JOYSTICK, 270-5687 CONTROL AR-AUXILIARY
AN ATTACHMENT
S/N T2S1-UP
PART OF 270-5688 CONTROL & MTG GP-JOYSTICK, 270-5687 CONTROL AR-AUXILIARY
AN ATTACHMENT
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE |
#SEBP44420202
222-5917: HARNESS AS-ENGINE
222-5917 HARNESS AS-ENGINE
S/N C7C5500-UP; KHX17464-UP
PART OF 330-6022 WIRING GP-ENGINE
ALSO AN ATTACHMENT
S/N C7C5500-UP; KHX17464-UP
PART OF 330-6022 WIRING GP-ENGINE
ALSO AN ATTACHMENT
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 135-5975 | [1] | GROMMET-WIRING | ||
| [1] | BOLT-SPECIAL | |||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 6N-7523 | [1] | WASHER (6.48X11.9X1.57-MM THK) | ||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| 194-5226 | [12] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [12] | WIRE AS (14-GA) | ||
#SEBP44420203
335-2081: HARNESS AS-WIRING
335-2081 HARNESS AS-WIRING -POWER CONVERTER
S/N T2S1-UP
FOR USE WITH 131-0327 CONVERTER AS, 283-2783 CONVERTER-POWER
FIELD INSTALLATION
S/N T2S1-UP
FOR USE WITH 131-0327 CONVERTER AS, 283-2783 CONVERTER-POWER
FIELD INSTALLATION
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 186-3736 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3E-3389 | [1] | WEDGE-RECEPTACLE LOCK (8-PIN) | ||
| 5P-5677 D | WIRE (18-GA, BLACK)(1.0-M) | |||
| 5P-5623 D | WIRE-ELECTRICAL (16-GA, BLACK)(0.2-M) | |||
| D | ORDER BY THE METER | |||
#SEBP44420204
381-2499: HARNESS AS-WIRING
381-2499 HARNESS AS-WIRING
S/N C7C5500-UP; KHX17464-UP
PART OF 330-6022 WIRING GP-ENGINE
ALSO AN ATTACHMENT
S/N C7C5500-UP; KHX17464-UP
PART OF 330-6022 WIRING GP-ENGINE
ALSO AN ATTACHMENT
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 211-6807 | [1] | COVER-CONNECTOR | ||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH KIT INCLUDES PLUS AS, WEDGE, & INTERFACE SEAL) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [12] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 160-8124 | [1] | PLUG AS (2-PIN) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [3] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | ||
| 288-7324 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [85] | PLUG-SEAL | ||
| 289-5150 E | SLEEVE (31-CM) | |||
| 9X-3402 | [65] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [65] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 7K-1181 | [3] | STRAP-CABLE | ||
| 329-3734 E | TAPE-ELECTRICAL (16-CM) | |||
| 1P-0810 | [1] | TAPE-ELECTRICAL | ||
| 305-5362 | [4] | TERMINAL AS (18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP44420205
264-8550: INSTALLATION AR-COMMUNICATION
264-8550 INSTALLATION AR-COMMUNICATION -PRODUCT LINK 321SR
S/N T2S1-UP
AN ATTACHMENT
S/N T2S1-UP
AN ATTACHMENT
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 247-5284 Y | [1] | CONTROL & MTG GP-COMMUNICATION (PRODUCT LINK 300) | ||
| 260-2207 Y | [1] | CONTROL & MTG GP-COMMUNICATION (PRODUCT LINK 121SR) | ||
| 262-2043 Y | [1] | ELECTRONICS GP-COMMUNICATION (PRODUCT LINK 300) | ||
| 290-9467 Y | [1] | MOUNTING GP-ANTENNA (PRODUCT LINK, ANTENNA) | ||
| 267-7751 Y | [1] | WIRING GP-COMMUNICATION (PRODUCT LINK 321SR) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44420206
264-8551: INSTALLATION AR-COMMUNICATION
264-8551 INSTALLATION AR-COMMUNICATION -PRODUCT LINK 121SR
S/N T2S1-UP
AN ATTACHMENT
S/N T2S1-UP
AN ATTACHMENT
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS#SEBP44420207
227-7581: INSTALLATION GP-SECURITY
227-7581 INSTALLATION GP-SECURITY
S/N T2S1-UP
CANNOT BE USED WITH @@@@@251-0542@@@@@
AN ATTACHMENT
S/N T2S1-UP
CANNOT BE USED WITH @@@@@251-0542@@@@@
AN ATTACHMENT
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-5607 | [4] | MOUNT-ISOLATION | |
| 2. | 8C-5608 | [2] | SPACER (6.5X9.5X25.4-MM THK) | |
| 3. | 285-3231 | [2] | KEY AS-ELECTRONIC (SECURITY)(YELLOW) | |
| -OR- | ||||
| 285-3232 | [2] | KEY AS-ELECTRONIC (SECURITY)(GREY) | ||
| 4. | 218-0404 | [1] | MODULE GP-INTERFACE (KEY) | |
| 4A. | 6V-6715 | [1] | SCREW-PAN HEAD (4-20X0.25-IN) | |
| 4B. | 8C-3095 | [1] | SEAL-O-RING | |
| 5. | 219-6314 | [2] | KEY RING (IDENTIFICATION) | |
| 6. | 251-0544 Y | [1] | PANEL GP-SWITCH (ENGINE SPEED, START) | |
| 7. | 7X-2533 M | [2] | BOLT (M6X1X35-MM) | |
| 8. | 9X-6165 | [2] | WASHER (6.5X22X2.5-MM THK) | |
| 9. | 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44420208
153-2521: LAMP GP-FLOOD
153-2521 LAMP GP-FLOOD
S/N T2S1-UP
24-VOLT
PART OF 238-2300, 238-2301, 282-4958 LIGHTING GP-FLOOD
AN ATTACHMENT
S/N T2S1-UP
24-VOLT
PART OF 238-2300, 238-2301, 282-4958 LIGHTING GP-FLOOD
AN ATTACHMENT
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-5210 M | [2] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 2. | 3B-4501 | [2] | LOCKWASHER | |
| 3. | 351-9918 | [1] | LAMP-HALOGEN (24-VOLT, 70-WATT) | |
| 4. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 5. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 6. | 174-7791 M | [1] | SCREW-TAPPING | |
| 7. | 9B-0453 | [1] | LOCKWASHER | |
| 8. | 170-6993 | [1] | COVER | |
| 9. | 180-3861 M | [4] | SCREW-TAPPING | |
| 10. | 170-9417 | [1] | LENS AS | |
| 11. | 170-9418 | [1] | BAND | |
| M | METRIC PART | |||
#SEBP44420209
153-2522: LAMP GP-FLOOD
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-5210 M | [2] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 2. | 3B-4501 | [2] | LOCKWASHER | |
| 3. | 9X-3463 | [1] | LAMP-HALOGEN (24-VOLT, 70-WATT) | |
| 4. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 5. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 6. | 174-7791 M | [1] | SCREW-TAPPING | |
| 7. | 5C-2889 | [1] | LOCKWASHER | |
| 8. | 170-6993 | [1] | COVER | |
| 9. | 180-3861 M | [4] | SCREW-TAPPING | |
| 10. | 170-9417 | [1] | LENS AS (FLOODLIGHT) | |
| 11. | 170-9418 | [1] | BAND | |
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0091 FMI 02 Incorrect Throttle Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0190 FMI 08 Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Fuel Filter Differential Pressure Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0091 FMI 08 Throttle Position signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Pressure Sensor Open or Short Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0324 FMI 06 Warning Lamp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0324 FMI 05 Warning Lamp open/short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1266 FMI 05 Diagnostic Lamp current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1266 FMI 06 Diagnostic Lamp current above normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Digital Sensor Supply Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Coolant Level Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Shutdown Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Throttle Position Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer



