AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

202-1259 CYLINDER BLOCK AS S/N 41Z23000-UP PART OF 108-3916 CYLINDER BLOCK GP 587R PIPELAYER


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

PIPELAYER 587R PIPELAYER BXL
 587R PIPELAYER BXL00001-UP (MACHINE) POWERED BY 3406C Engine SEBP4444 587R BXL   (2006)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
7W-5445 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK AS
202-1257 CYLINDER BLOCK AS
CYLINDER BLOCK AS
202-1259 CYLINDER BLOCK AS
CYLINDER BLOCK AS
463-3536 CYLINDER BLOCK AS
CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
 

#SEBP44440030
 

202-1259: CYLINDER BLOCK AS

202-1259 CYLINDER BLOCK AS
S/N 41Z23000-UP
PART OF 108-3916 CYLINDER BLOCK GP
i01662543 SEBP4444
2021259 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 587R PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 463-3546 [1] CYLINDER BLOCK AS  
  9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
  167-8081 [7] CAP-CRANKSHAFT BEARING  
  167-8083 [14] BOLT (7/8-14X7.5-IN)  
2. 4N-0685 [6] BUSHING (1-IN WIDE)  
3. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
 

#SEBP44440031
 

463-3536: CYLINDER BLOCK AS

463-3536 CYLINDER BLOCK AS
S/N TXC1-UP; 41Z23000-UP
PART OF 202-1258 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
i06280842 SEBP4444
4633536 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 587R PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0685 [6] BUSHING (1-IN WIDE)  
2. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
3. 202-1257 Y [1] CYLINDER BLOCK AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP44440032
 

108-3916: CYLINDER BLOCK GP

108-3916 CYLINDER BLOCK GP
S/N 41Z23000-UP
FIELD REPLACEMENT FOR @@@@@ 7E-4697@@@@@
i01662537 SEBP4444
1083916 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 587R PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-5155 [1] SEAL-O-RING  
2. 8T-6757 [3] PLUG-PIPE  
3. 7W-6534 [1] PLUG-PIPE (HEX)  
4. 9S-8009 [1] PLUG-O-RING (STRAIGHT THREAD O-RING)  
5. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
6. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 9X-7378 [1] SEAL-O-RING  
15. 7X-7732 [6] PLUG-PIPE  
16. 114-4427 [2] SEAL-O-RING  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 202-1259 CY [1] CYLINDER BLOCK AS  
19. 250-0466 [2] SEAL-O-RING  
20. 100-7399 [2] PLUG  
21. 9S-4182 [1] PLUG (7/16-20-THD)(DRAIN)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP44440033
 

152-7642: CYLINDER BLOCK GP

152-7642 CYLINDER BLOCK GP
S/N 41Z23000-UP
FIELD REPLACEMENT FOR @@@@@ 7E-4697@@@@@
i01625329 SEBP4444
1527642 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 587R PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6757 [3] PLUG-PIPE  
2. 7W-6534 [1] PLUG-PIPE  
3. 202-1257 CY [1] CYLINDER BLOCK AS  
4. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
5. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
6. 119-5155 [1] SEAL-O-RING  
7. 030-7571 [4] BOLT (3/8-16X1-IN)  
8. 4W-8585 [1] COVER  
9. 7W-6081 [1] GASKET  
11. 8S-9094 [1] PLUG-ORIFICE  
12. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
13. 114-4427 [2] SEAL-O-RING  
14. 8T-6767 [6] PLUG-PIPE (3/8-18-THD)  
15. 4N-0685 [6] BUSHING (1-IN WIDE)(MARKED X)  
16. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
17. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
18. 9S-8009 [1] PLUG-O-RING  
19. 100-7399 [2] PLUG  
20. 250-0466 [2] SEAL-O-RING  
21. 9S-4182 [1] PLUG (7/16-20-THD)  
22. 9X-7378 [1] SEAL-O-RING  
   
  6I-4361 ABFN INSERT-LINER SEAT (0.772-MM THK)  
  9Y-3368 ABFN INSERT-LINER SEAT (0.822-MM THK)  
  6I-4362 ABFN INSERT-LINER SEAT (0.872-MM THK)  
  6I-4363 ABFN INSERT-LINER SEAT (1.555-MM THK)  
  2W-3815 ABFN INSERT-LINER SEAT (1.605-MM THK)  
  6I-4364 ABFN INSERT-LINER SEAT (1.655-MM THK)  
  6I-4365 ABFN INSERT-LINER SEAT (2.66-MM THK)  
  5N-0093 ABFN INSERT-LINER SEAT (2.71-MM THK)  
  6I-4366 ABFN INSERT-LINER SEAT (2.76-MM THK)  
  101-0524 ABFN INSERT-LINER SEAT (5.16-MM THK)  
  101-0523 ABFN INSERT-LINER SEAT (5.21-MM THK)  
  101-0525 ABFN INSERT-LINER SEAT (5.26-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  N   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
  Y   SEPARATE ILLUSTRATION
 

#SEBP44440034
 

202-1258: CYLINDER BLOCK GP

202-1258 CYLINDER BLOCK GP
S/N TXC1-UP; 41Z23000-UP
PART OF 373-0466, 7E-4697 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
i01538305 SEBP4444
2021258 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 587R PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-5854 [6] BAND-FILLER (130.2-MM ID)  
2. 197-9322 [6] LINER-CYLINDER BLOCK  
3. 463-3536 Y [1] CYLINDER BLOCK AS  
4. 110-2220 [6] SEAL-LINER  
5. 142-6217 [6] SEAL-O-RING  
6. 142-7072 [6] SEAL-LINER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP44440035
 

373-0466: CYLINDER BLOCK GP

373-0466 CYLINDER BLOCK GP
S/N TXC1-UP
PART OF 371-0668 ENGINE AR-CORE
ALSO AN ATTACHMENT
i04500593 SEBP4444
3730466 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 587R PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-9540 [2] DOWEL  
2. 4N-1650 [2] DOWEL  
3. 4W-8585 [1] COVER  
4. 6I-4303 [1] PLATE-BLOCK  
5. 6I-4024 [1] GASKET-PLATE  
6. 7W-6081 [1] GASKET  
7. 8S-9094 [1] PLUG-ORIFICE  
8. 2M-6471 [2] PLUG-CUP  
9. 151-5925 [6] BOLT (7/16-14-THD)  
10. 151-5928 [6] JET AS-PISTON COOLING  
11. 202-1258 Y [1] CYLINDER BLOCK GP  
12. 030-7571 [4] BOLT (3/8-16X1-IN)  
14. 307-2671 [1] PLUG AS  
  9S-8002 [1] PLUG (7/16-20-THD)  
  214-7566 [1] SEAL-O-RING  
15. 309-5131 [1] PLUG AS  
  9S-8006 [1] PLUG (7/8-14-THD)  
  238-5081 [1] SEAL-O-RING  
16. 330-9730 [1] PLUG AS  
  9S-8009 [1] PLUG-O-RING  
  238-5083 [1] SEAL-O-RING  
17. 3S-5496 [2] SEAL-O-RING  
18. 4N-0683 [4] DOWEL  
19. 7W-6534 [5] PLUG-PIPE  
20. 8T-6757 [3] PLUG-PIPE  
21. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP44440036
 

7E-4697: CYLINDER BLOCK GP

7E-4697 CYLINDER BLOCK GP
S/N 41Z23000-UP
PART OF 274-6331, 311-9277 ENGINE AR
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6- 7E-3632 JET AS-PISTON COOLING, 6-111-8606 BOLT-SPECIAL
ALSO AN ATTACHMENT
i01538366 SEBP4444
7E4697 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 587R PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-5928 [6] JET AS-PISTON COOLING  
2. 8T-6757 [3] PLUG-PIPE  
3. 7W-6534 [1] PLUG-PIPE  
5. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
6. 1S-9540 [2] DOWEL  
7. 3S-5496 [2] SEAL-O-RING  
8. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 304-8008 [1] PLUG AS  
  6V-9027 [1] SEAL-O-RING  
  9S-8002 [1] PLUG (7/16-20-THD)  
13. 4N-0683 [4] DOWEL  
14. 4N-1650 [2] DOWEL  
15. 6I-2981 [1] PLATE-BLOCK  
16. 6I-4024 [1] GASKET-PLATE  
17. 8S-9094 [1] PLUG-ORIFICE  
19. 353-5125 B [2] PLUG AS  
    (EACH INCLUDES)
  6V-3251 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
20. 7X-7732 [6] PLUG-PIPE  
21. 151-5925 [6] BOLT (7/16-14-THD)  
24. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
25. 202-1258 CY [1] CYLINDER BLOCK GP  
26. 353-5141 [1] PLUG AS  
  9S-8009 [1] PLUG-O-RING  
  291-8145 [1] SEAL-O-RING  
27. 2M-6471 [2] PLUG-CUP  
   
  101-0523 ABF INSERT-LINER SEAT (5.21-MM THK)  
  101-0524 ABF INSERT-LINER SEAT (5.16-MM THK)(0.5-MM US)  
  101-0525 ABF INSERT-LINER SEAT (5.26-MM THK)(0.5-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP44440037
 

110-5095: CYLINDER HEAD GP

110-5095 CYLINDER HEAD GP
S/N 41Z23000-26010
PART OF 274-6331, 311-9277 ENGINE AR
ALSO AN ATTACHMENT
i00123132 SEBP4444
1105095 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 587R PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2203 Y [1] CYLINDER HEAD GP  
2. 3S-5496 [2] SEAL-O-RING  
3. 100-6920 [6] ADAPTER-NOZZLE  
4. 7L-4774 [6] SEAL-O-RING  
5. 4N-7253 [6] GASKET-CHAMBER  
6. 5F-4899 [12] BOLT (3/8-16X5.5-IN)  
7. 6L-7442 [6] STUD-TAPERLOCK (5/16-18X1.08-IN)  
8. 3E-6772 [24] SEAL (WATER)  
9. 124-1855 [20] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
10. 6I-3066 [1] GASKET-CYLINDER HEAD  
11. 8T-6767 [1] PLUG-PIPE (3/8-18-THD)  
12. 5H-1504 [20] WASHER-HARD (20X33.5X5-MM THK)  
13. 7W-6492 [3] PLUG-PIPE (1/2-14-THD)  
14. 7W-6492 B [1] PLUG-PIPE (1/2-14-THD)  
    (USE WITHOUT AIR COMPRESSOR)
15. 4S-6137 [1] STUD-TAPERLOCK (3/8-16X3.1-IN)  
16. 106-1792 [11] STUD-TAPERLOCK (3/8-16X4-IN)  
17. 194-8124 [6] SLEEVE AS (EXHAUST PORT)  
   
  5P-3931 ABF COMPOUND-ANTI-SEIZE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP44440038
 

110-5096: CYLINDER HEAD GP

110-5096 CYLINDER HEAD GP
S/N 41Z23000-UP
FIELD REPLACEMENT FOR @@@@@110-5099@@@@@
i00123133 SEBP4444
1105096 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 587R PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-5099 Y [1] CYLINDER HEAD GP  
2. 122-7374 [24] GUIDE-VALVE (STANDARD)  
  121-9859 AB GUIDE-VALVE (0.13-MM OS)  
  121-9860 AB GUIDE-VALVE (0.51-MM OS)  
3. 2N-5775 [12] DOWEL  
4. 194-8124 B [6] SLEEVE AS (EXHAUST PORT)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP44440039
 

110-5099: CYLINDER HEAD GP

110-5099 CYLINDER HEAD GP
S/N TXC1-UP; 41Z23000-UP
PART OF 110-5096, 214-1667, 7W-2203 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@110-5096@@@@@
ALSO AN ATTACHMENT
i00123134 SEBP4444
1105099 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 587R PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [12] PLUG-CUP  
2. 4N-5893 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 2M-6471 [1] PLUG-CUP  
5. 3B-0623 [10] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

Information:

Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Special Instruction
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation of the 3406B and 3406C Long Block Engines
Installation of the 3406B and 3406C Long Block Engines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24
The Cylinder Liners Have a New Appearance {1216}
2005/03/14

Caterpillar Parts SIS Catalog 587R :

CYLINDER BLOCK AS
202-1257 CYLINDER BLOCK AS
CRANKSHAFT GP
6I-1001 CRANKSHAFT GP
CRANKSHAFT GP
6I-1001 CRANKSHAFT GP
CRANKSHAFT AS
430-2593 CRANKSHAFT AS
COVER GP-VALVE MECHANISM
9Y-8206 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7N-4467 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
374-0710 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
297-2472 COVER GP-VALVE MECHANISM
CYLINDER BLOCK AS
463-3536 CYLINDER BLOCK AS
CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
CYLINDER BLOCK GP
373-0466 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-4697 CYLINDER BLOCK GP
CYLINDER HEAD GP
110-5095 CYLINDER HEAD GP
CYLINDER HEAD GP
110-5096 CYLINDER HEAD GP

Truck sale:

2009 CAT 587R
Call 
2009 CAT 587R

Pacific Cranes and Equipment Sales
RIEGALWOOD, North Carolina
CATERPILLAR 587R 2012
 
CATERPILLAR 587R 2012
- PIPELAYERS
ZEPPELIN RUSSLAND
CATERPILLAR 587R 2012
 
CATERPILLAR 587R 2012
- PIPELAYERS
ZEPPELIN RUSSLAND
CATERPILLAR 587R 2012
 
CATERPILLAR 587R 2012
- PIPELAYERS
ZEPPELIN RUSSLAND
CATERPILLAR 587R 2012
 
CATERPILLAR 587R 2012
- PIPELAYERS
ZEPPELIN RUSSLAND
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.