OPERATOR STATION
SEAT GPBLOWER GP-CAB
BOX GP-STORAGE
CAB GP
OPERATOR STATION
SEAT GP
#SEBP44451020
378-3854: ARMREST GP
378-3854 ARMREST GP
S/N KSB1125-UP; DTD1075-UP; RCW1100-UP
PART OF 378-3910, 378-3913, 378-3914, 378-3915, 382-0925 CAB AR, 378-3911, 378-3912 CANOPY AR, 378-3888 CANOPY AR-NON-ROPS
AN ATTACHMENT
S/N KSB1125-UP; DTD1075-UP; RCW1100-UP
PART OF 378-3910, 378-3913, 378-3914, 378-3915, 382-0925 CAB AR, 378-3911, 378-3912 CANOPY AR, 378-3888 CANOPY AR-NON-ROPS
AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 126-3700 | [1] | ARMREST AS (RH) | |
| 2. | 184-1503 | [2] | KNOB | |
| 3. | 184-3270 | [1] | PLATE AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 365-9368 | [1] | PLATE AS | |
| 5. | 415-1224 | [1] | PLATE | |
| 6. | 416-0506 | [1] | ARMREST AS (LH) | |
| 7. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 8. | 6V-3964 | [2] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 9. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 10. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 12. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 13. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 14. | 9X-2043 M | [2] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| M | METRIC PART | |||
#SEBP44451021
230-5388: BLOWER GP-CAB
230-5388 BLOWER GP-CAB
S/N KSB1-UP; DTD1-UP; RCW1-UP
PART OF 325-3727, 378-7878 PRESSURIZER GP-CAB
ALSO AN ATTACHMENT
S/N KSB1-UP; DTD1-UP; RCW1-UP
PART OF 325-3727, 378-7878 PRESSURIZER GP-CAB
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 229-6635 | [1] | GASKET | |
| 3. | 230-5385 | [2] | PLATE AS | |
| 4. | 237-0934 | [1] | PLATE AS | |
| 5. | 237-0956 | [1] | PLATE AS | |
| 6. | 257-5029 | [1] | RESISTOR AS | |
| 7. | 260-1914 | [1] | HARNESS AS-MOTOR | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6T-6505 | [2] | HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK) | ||
| 6T-6506 | [2] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 192-2112 | [4] | SOCKET-TERMINAL | ||
| 8. | 438-3170 | [1] | BLOWER AS | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9. | 282-1951 | [1] | PLATE AS | |
| 10. | 282-1952 | [1] | COVER AS-ACCESS | |
| 11. | 282-1953 | [1] | GUARD (RESISTOR) | |
| 12. | 2M-1444 | [2] | SCREW-TAPPING (8-18X0.3-IN) | |
| 13. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 14. | 6H-4005 | [1] | GROMMET | |
| 15. | 6S-8584 M | [8] | SCREW (M4X0.7-THD) | |
| 16. | 096-6166 | [8] | WASHER-HARD (4.5X9X1-MM THK) | |
| 17. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP44451022
332-3525: BOX GP-STORAGE
332-3525 BOX GP-STORAGE
S/N KSB1-1124; DTD1-1074; RCW1-1099
PART OF 325-3728 COVER GP-CONSOLE, 325-3730 PLATFORM GP-OPERATOR
ALSO AN ATTACHMENT
S/N KSB1-1124; DTD1-1074; RCW1-1099
PART OF 325-3728 COVER GP-CONSOLE, 325-3730 PLATFORM GP-OPERATOR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 212-6157 | [1] | HINGE AS | |
| 2. | 214-2015 | [1] | LATCH | |
| 3. | 224-4905 | [4] | BUMPER | |
| 4. | 332-3527 | [1] | DOOR AS-ACCESS | |
| 5. | 352-1970 | [1] | BRACKET AS | |
| 6. | 368-5020 | [1] | STRIP-RUBBER | |
| 7. | 095-7930 M | [2] | SCREW-MACHINE (M4X0.7X6-MM) | |
| 8. | 096-0192 | [2] | LOCKWASHER | |
| 9. | 117-8929 | [4] | WASHER (6.6X22X2-MM THK) | |
| 10. | 174-8131 M | [2] | SCREW-TRUSS HEAD (M4X0.7X12-MM) | |
| 11. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| M | METRIC PART | |||
#SEBP44451023
332-3525: BOX GP-STORAGE
332-3525 BOX GP-STORAGE
S/N KSB1-1124; DTD1-1074; RCW1-1099
PART OF 325-3728, 378-3869, 378-7883 COVER GP-CONSOLE, 325-3730, 378-7885 PLATFORM GP-OPERATOR
ALSO AN ATTACHMENT
S/N KSB1-1124; DTD1-1074; RCW1-1099
PART OF 325-3728, 378-3869, 378-7883 COVER GP-CONSOLE, 325-3730, 378-7885 PLATFORM GP-OPERATOR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 214-2015 | [1] | LATCH | |
| 2. | 224-4905 C | [2] | BUMPER | |
| 3. | 332-3527 | [1] | DOOR AS-ACCESS | |
| 4. | 372-1637 C | [1] | PLATE | |
| 5. | 373-2313 C | [1] | HINGE AS | |
| 6. | 373-2319 C | [1] | HINGE AS | |
| 7. | 376-1652 C | [1] | BRACKET AS | |
| 8. | 095-7930 M | [2] | SCREW-MACHINE (M4X0.7X6-MM) | |
| 9. | 107-3786 CM | [4] | BOLT (M4X0.7X12-MM) | |
| 10. | 117-8929 | [4] | WASHER (6.6X22X2-MM THK) | |
| 11. | 138-8454 CM | [4] | SCREW-TRUSS HEAD (M4X0.7X10-MM) | |
| 12. | 5C-8312 CM | [2] | NUT (M4X0.7-THD) | |
| 13. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP44451024
325-3724: CAB AR
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 279-2591 Y | [1] | AIR CONDITIONER GP | ||
| 325-3726 Y | [1] | CAB AR | ||
| 325-3728 Y | [1] | COVER GP-CONSOLE | ||
| 325-4508 Y | [1] | HEATER GP-CAB | ||
| 325-0081 Y | [1] | LINES GP-AIR CONDITIONER | ||
| 325-0062 Y | [1] | LINES GP-HEATER | ||
| 169-9637 Y | [1] | MOUNTING GP-CAB | ||
| 325-3727 Y | [1] | PRESSURIZER GP-CAB | ||
| 272-5171 Y | [1] | TANK GP-WINDOW WASHER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451025
325-3725: CAB AR
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 355-8516 Y | [1] | CAB AR | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451026
325-3726: CAB AR
325-3726 CAB AR
S/N KSB1-1124; DTD1-1074; RCW1-1099
PART OF 325-3724, 355-8516, 378-3910, 382-0925 CAB AR
ALSO AN ATTACHMENT
S/N KSB1-1124; DTD1-1074; RCW1-1099
PART OF 325-3724, 355-8516, 378-3910, 382-0925 CAB AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 158-7696 Y | [1] | CAB GP | ||
| 108-1335 Y | [1] | HANDHOLD GP | ||
| 332-3496 Y | [1] | INSTALLATION GP-RADIO | ||
| 332-3498 Y | [1] | LINER GP-CAB | ||
| 105-9659 Y | [1] | MIRROR GP-REAR VIEW (INTERIOR) | ||
| 332-3497 Y | [1] | WASHER GP-WINDOW | ||
| 354-6924 Y | [1] | WIPER GP-WINDOW | ||
| -OR- | ||||
| 398-8457 Y | [1] | WIPER GP-WINDOW | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451027
332-3536: CAB AR
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT) | |
| 2. | 8D-3932 | [4] | MOUNT | |
| 3. | 9X-6772 B | [13] | STRAP-CABLE | |
| 4. | 134-0165 | [4] | WASHER (13.8X45X3-MM THK) | |
| 5. | 209-5105 Y | [1] | PRESSURIZER GP-CAB | |
| 6. | [2] | CLAMP | ||
| 7. | 248-6955 | [1] | PLATE AS | |
| 8. | 248-6957 | [1] | PLATE | |
| 9. | 248-6960 | [1] | TUBE | |
| 10. | 248-6971 | [1] | HARNESS AS-CAB | |
| 102-8802 | [3] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 9W-0844 | [8] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 9X-1056 | [4] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (100-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 126-1768 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [4] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 11. | 253-8321 | [1] | HARNESS AS-DASH (PRECLEANER) | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE & WEDGE) | ||||
| 9W-0844 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 126-1767 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2274 | [4] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 12. | 253-8323 | [1] | HARNESS AS-CAB (BEACON, PRECLEANER) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (80-CM) | |||
| 126-1768 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 13. | 336-5825 Y | [1] | CAB AR | |
| 14. | 336-5827 | [1] | PLATE AS | |
| 248-6960 | [1] | TUBE | ||
| 15. | 351-6231 | [1] | GASKET | |
| 16. | 127-4833 | [3] | CLIP | |
| 17. | 130-5300 | [1] | CLIP | |
| 18. | 1W-5040 | [8] | WASHER-RETAINING (13.8X45.5X12-MM THK) | |
| 19. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 20. | 4P-7428 | [2] | CLIP (LADDER) | |
| 21. | 4P-8134 | [3] | CLIP (LADDER) | |
| 22. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 23. | 5P-8167 | [2] | BOLT (3/8-16X0.625-IN) | |
| 24. | 6V-7357 M | [4] | BOLT (M6X1X25-MM) | |
| 25. | 7C-4354 | [3] | CLIP | |
| 26. | 8T-4121 | [18] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 28. | 8T-4176 M | [4] | BOLT (M12X1.75X90-MM) | |
| 29. | 8T-4186 M | [3] | BOLT (M10X1.5X40-MM) | |
| 30. | 8T-4195 M | [7] | BOLT (M10X1.5X30-MM) | |
| 31. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 32. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 33. | 9X-8256 | [5] | WASHER (6.6X12X2-MM THK) | |
| 34. | 8T-6726 | [3] | CLAMP-HOSE | |
| 35. | 209-5110 E | HOSE (165-CM) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451028
332-3536: CAB AR
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-7581 C | [2] | CLIP (LADDER) | |
| 2. | 8D-3932 | [4] | MOUNT | |
| 3. | 7K-1181 BC | [15] | STRAP-CABLE | |
| 4. | 134-0165 | [4] | WASHER (13.8X45X3-MM THK) | |
| 5. | 209-5105 Y | [1] | PRESSURIZER GP-CAB | |
| 6. | [2] | CLAMP | ||
| 7. | 248-6955 | [1] | PLATE AS | |
| 8. | 248-6957 | [1] | PLATE | |
| 9. | 248-6960 | [1] | TUBE | |
| 11. | 367-3243 C | [1] | HARNESS AS-CAB | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 274-3774 | [1] | CAP-CONNECTOR | ||
| 12. | 253-8323 | [1] | HARNESS AS-CAB (BEACON, PRECLEANER) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (80-CM) | |||
| 126-1768 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 13. | 336-5825 Y | [1] | CAB AR | |
| 14. | 336-5827 | [1] | PLATE AS | |
| 248-6960 | [1] | TUBE | ||
| 15. | 351-6231 | [1] | GASKET | |
| 16. | 127-4833 | [3] | CLIP | |
| 18. | 1W-5040 | [8] | WASHER-RETAINING (13.8X45.5X12-MM THK) | |
| 19. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 20. | 4P-7428 C | [1] | CLIP (LADDER) | |
| 21. | 4P-8134 C | [1] | CLIP (LADDER) | |
| 24. | 6V-7357 M | [4] | BOLT (M6X1X25-MM) | |
| 25. | 7C-4354 | [3] | CLIP | |
| 26. | 8T-4121 C | [15] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 28. | 8T-4176 M | [4] | BOLT (M12X1.75X90-MM) | |
| 29. | 8T-4186 M | [3] | BOLT (M10X1.5X40-MM) | |
| 30. | 8T-4195 CM | [6] | BOLT (M10X1.5X30-MM) | |
| 31. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 32. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 33. | 9X-8256 C | [4] | WASHER (6.6X12X2-MM THK) | |
| 34. | 8T-6726 | [3] | CLAMP-HOSE | |
| 35. | 209-5110 E | HOSE (165-CM) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451029
335-6338: CAB AR
335-6338 CAB AR
S/N KSB1-1124; DTD1-1074; RCW1-1099
PART OF 333-9163 FORESTRY AR
FOR USE WITH SCREENS
AN ATTACHMENT
S/N KSB1-1124; DTD1-1074; RCW1-1099
PART OF 333-9163 FORESTRY AR
FOR USE WITH SCREENS
AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 279-2591 Y | [1] | AIR CONDITIONER GP | ||
| Y | [1] | CAB AR | ||
| 325-3728 Y | [1] | COVER GP-CONSOLE | ||
| 325-4508 Y | [1] | HEATER GP-CAB | ||
| 325-0081 Y | [1] | LINES GP-AIR CONDITIONER | ||
| 325-0062 Y | [1] | LINES GP-HEATER | ||
| 169-9637 Y | [1] | MOUNTING GP-CAB | ||
| 325-3727 Y | [1] | PRESSURIZER GP-CAB | ||
| 272-5171 Y | [1] | TANK GP-WINDOW WASHER | ||
| Y | SEPARATE ILLUSTRATION | |||
