AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

587T PIPELAYER FAT00001-UP (MACHINE) POWERED BY C15 Engine BASIC ENGINE Caterpillar SIS



PIPELAYER 587T PIPELAYER FAT
 587T PIPELAYER FAT00001-UP (MACHINE) POWERED BY C15 Engine SEBP4448 587T FAT   (2006)

Parts group 587T:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
234-7935 CAMSHAFT GP
234-7935 CAMSHAFT GP
S/N TXG1-UP; LHX1-UP
PART OF 241-5929, 351-2841 ENGINE AR-CORE
ALSO AN ATTACHMENT
GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
S/N TXG1-UP; LHX1-UP
DUAL CAM SENSORS
PART OF 208-9490 GEAR GP-FRONT
ALSO AN ATTACHMENT
COMPRESSOR GP-REFRIGERANT
MOUNTING GP-ALTERNATOR & COMPR
222-4562 MOUNTING GP-ALTERNATOR & COMPR
222-4562 MOUNTING GP-ALTERNATOR & COMPR
S/N TXG1-UP; LHX1-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
CONVERSION GP
360-8148 CONVERSION AR-ENGINE
360-8148 CONVERSION AR-ENGINE
S/N FAT1-UP
AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
223-9731 CRANKSHAFT GP
223-9731 CRANKSHAFT GP
S/N TXG1-UP; LHX1-UP
PART OF 241-5929, 351-2841 ENGINE AR-CORE
ALSO AN ATTACHMENT
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT -REAR
S/N TXG1-UP; LHX6443-UP
PART OF 248-8361 HOUSING GP-FLYWHEEL
FOR USE WITH CCW ROTATION
ALSO AN ATTACHMENT
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N TXG1-UP; LHX1-UP
PART OF 223-9731 CRANKSHAFT GP
FOR USE WITH CW ROTATION
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
170-4672 COVER GP-CYLINDER BLOCK
170-4672 COVER GP-CYLINDER BLOCK
S/N TXG1-UP; LHX1-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
COVER GP-CYLINDER BLOCK
228-4412 COVER GP-CYLINDER BLOCK
228-4412 COVER GP-CYLINDER BLOCK
S/N TXG1-UP; LHX1-UP
RIGHT SIDE OF BLOCK
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
CYLINDER BLOCK AS
229-8568 CYLINDER BLOCK AS
229-8568 CYLINDER BLOCK AS
S/N LHX1-UP
PART OF 222-1976 CYLINDER BLOCK GP
CYLINDER BLOCK AS
267-4631 CYLINDER BLOCK AS
267-4631 CYLINDER BLOCK AS
S/N TXG1-UP; LHX1-UP
PART OF 267-4632 CYLINDER BLOCK AS
CYLINDER BLOCK AS
267-4632 CYLINDER BLOCK AS
267-4632 CYLINDER BLOCK AS
S/N TXG1-UP; LHX10176-UP
PART OF 223-9252 CYLINDER BLOCK GP
CYLINDER BLOCK AS
357-1317 CYLINDER BLOCK AS
357-1317 CYLINDER BLOCK AS
S/N TXG1-UP; LHX10176-UP
PART OF 223-9252 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
CYLINDER BLOCK AS
488-1676 CYLINDER BLOCK AS
488-1676 CYLINDER BLOCK AS
S/N TXG1-UP; LHX10176-UP
PART OF 223-9252 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
222-1976 CYLINDER BLOCK GP
222-1976 CYLINDER BLOCK GP
S/N LHX1-4641
PART OF 223-9252 CYLINDER BLOCK GP
CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
S/N LHX1-4641
PART OF 241-5929 ENGINE AR-CORE
CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
S/N LHX4642-10175
PART OF 241-5929 ENGINE AR-CORE
CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
S/N TXG1-UP; LHX10176-UP
PART OF 241-5929, 351-2841 ENGINE AR-CORE
CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
S/N TXG1-UP; LHX10176-UP
PART OF 241-5929, 351-2841 ENGINE AR-CORE
Type 1
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
223-9252 CYLINDER BLOCK GP
S/N TXG1-UP; LHX10176-UP
PART OF 241-5929, 351-2841 ENGINE AR-CORE
Type 2
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
234-5997 CYLINDER BLOCK GP
234-5997 CYLINDER BLOCK GP
S/N LHX4642-10175
ACERT, 14.6 LITER
PART OF 223-9252 CYLINDER BLOCK GP
PLUG GP-CYLINDER BLOCK
225-6329 PLUG GP-CYLINDER BLOCK
225-6329 PLUG GP-CYLINDER BLOCK
S/N TXG1-UP; LHX1-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
PLUG GP-CYLINDER BLOCK
229-9477 PLUG GP-CYLINDER BLOCK
229-9477 PLUG GP-CYLINDER BLOCK
S/N TXG1-UP; LHX1-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
PLUG GP-CYLINDER BLOCK
305-9196 PLUG GP-CYLINDER BLOCK
305-9196 PLUG GP-CYLINDER BLOCK
S/N TXG1-UP; LHX10176-UP
PART OF 223-9252 CYLINDER BLOCK GP
CYLINDER HEAD GP
CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
S/N LHX1-UP
WITH PRE-FINISHED VALVE SEAT INSERTS
PART OF 243-6741 CYLINDER HEAD AS, 223-9250 CYLINDER HEAD GP
CYLINDER HEAD AS
243-0943 CYLINDER HEAD AS
243-0943 CYLINDER HEAD AS
S/N LHX1-2971
PART OF 243-6741 CYLINDER HEAD AS
CYLINDER HEAD AS
243-6741 CYLINDER HEAD AS
243-6741 CYLINDER HEAD AS
S/N LHX1-2971
WITH MACHINE IN PLACE VALVE SEAT INSERTS
PART OF 223-9250 CYLINDER HEAD GP
CYLINDER HEAD AS
281-1640 CYLINDER HEAD AS
281-1640 CYLINDER HEAD AS
S/N TXG1-UP; LHX10976-UP
PART OF 263-5055, 432-5470 CYLINDER HEAD GP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
S/N LHX1-2971
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 235-2974 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
S/N LHX2972-UP
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 235-2974 CYLINDER HEAD GP
CYLINDER HEAD GP
235-2974 CYLINDER HEAD GP
235-2974 CYLINDER HEAD GP
S/N LHX1-10975
PART OF 241-5929 ENGINE AR-CORE
CYLINDER HEAD GP
263-5055 CYLINDER HEAD GP
263-5055 CYLINDER HEAD GP
S/N TXG1-UP; LHX10976-UP
PART OF 274-1953 CYLINDER HEAD GP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
274-1953 CYLINDER HEAD GP
274-1953 CYLINDER HEAD GP
S/N TXG1-UP; LHX10976-UP
PART OF 241-5929, 351-2841 ENGINE AR-CORE
ALSO AN ATTACHMENT
CYLINDER HEAD GP
432-5470 CYLINDER HEAD GP
432-5470 CYLINDER HEAD GP
S/N TXG1-UP
PART OF 432-5472 CYLINDER HEAD GP
CYLINDER HEAD GP
432-5472 CYLINDER HEAD GP
432-5472 CYLINDER HEAD GP
S/N TXG1-UP
PART OF 351-2841 ENGINE AR-CORE
PLUG GP-CYLINDER HEAD
229-6711 PLUG GP-CYLINDER HEAD
229-6711 PLUG GP-CYLINDER HEAD
S/N TXG1-UP; LHX1-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
FOR USE WITH AIR COMPRESSOR COVER GROUP IF NO AIR COMPRESSOR
ALSO AN ATTACHMENT
DAMPER GP
DAMPER & PULLEY GP
247-9926 DAMPER & PULLEY GP
247-9926 DAMPER & PULLEY GP
S/N TXG1-UP; LHX1-UP
8 GROOVE POLY-VEE SPUN PULLEY, ADAPTER AND A 13 INCH DAMPER
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
DRIVE GP-PUMP
ADAPTER GP-PUMP DRIVE
133-9907 ADAPTER GP-PUMP DRIVE
133-9907 ADAPTER GP-PUMP DRIVE
S/N TXG1-UP; LHX1-UP
PART OF 6I-3638 DRIVE GP-PUMP
ALSO AN ATTACHMENT
DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
S/N TXG1-UP; LHX1-UP
SAE 2
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
ENGINE GP
468-7363 KIT-ENGINE GASKET
468-7363 KIT-ENGINE GASKET -WATER PUMP
S/N FAT1-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES
FIELD INSTALLATION
FLYWHEEL GP
FLYWHEEL GP
159-9019 FLYWHEEL GP
159-9019 FLYWHEEL GP
S/N TXG1-UP; LHX1-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
GEAR GP
GEAR GP-FRONT
208-9490 GEAR GP-FRONT
208-9490 GEAR GP-FRONT
S/N TXG1-UP; LHX1-UP
PART OF 241-5929, 351-2841 ENGINE AR-CORE
Type 1
ALSO AN ATTACHMENT
GEAR GP-FRONT
208-9490 GEAR GP-FRONT
208-9490 GEAR GP-FRONT
S/N TXG1-UP; LHX1-UP
PART OF 241-5929, 351-2841 ENGINE AR-CORE
Type 2
ALSO AN ATTACHMENT
GEAR GP-REAR
248-8360 GEAR GP-REAR
248-8360 GEAR GP-REAR
S/N TXG1-UP; LHX1-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
GEAR GP-REAR
367-7356 GEAR GP-REAR
367-7356 GEAR GP-REAR
S/N LHX29581-UP
PART OF 364-2938 ENGINE AR-COMPLETE
AN ATTACHMENT
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
S/N LHX1-6442
PART OF 248-8359 ENGINE AR-COMPLETE
COVER GP-FLYWHEEL HOUSING
1W-8341 COVER GP-FLYWHEEL HOUSING
1W-8341 COVER GP-FLYWHEEL HOUSING
S/N TXG1-UP; LHX1-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
ALSO AN ATTACHMENT
COVER GP-FLYWHEEL HOUSING
358-1231 COVER GP-FLYWHEEL HOUSING
358-1231 COVER GP-FLYWHEEL HOUSING
S/N TXG2865-UP
PART OF 248-8359 ENGINE AR-COMPLETE
HOUSING AS-FLYWHEEL
253-4096 HOUSING AS-FLYWHEEL
253-4096 HOUSING AS-FLYWHEEL
S/N TXG1-UP; LHX1-UP
PART OF 248-8361 HOUSING GP-FLYWHEEL
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
248-8361 HOUSING GP-FLYWHEEL
248-8361 HOUSING GP-FLYWHEEL
S/N LHX1-6442
PART OF 248-8359 ENGINE AR-COMPLETE
HOUSING GP-FLYWHEEL
248-8361 HOUSING GP-FLYWHEEL
248-8361 HOUSING GP-FLYWHEEL
S/N TXG1-UP; LHX6443-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
159-6159 COVER GP-FRONT HOUSING
159-6159 COVER GP-FRONT HOUSING
S/N TXG1-UP; LHX1-UP
CAM AND IDLER GEAR ACCESS
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
FASTENER GP-FRONT HOUSING
221-1428 FASTENER GP-FRONT HOUSING
221-1428 FASTENER GP-FRONT HOUSING
S/N TXG1-UP; LHX1-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
FASTENER GP-FRONT HOUSING
4P-6846 FASTENER GP-FRONT HOUSING
4P-6846 FASTENER GP-FRONT HOUSING
S/N TXG1-UP; LHX1-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
HOUSING GP-FRONT
225-3903 HOUSING GP-FRONT
225-3903 HOUSING GP-FRONT
S/N TXG1-UP; LHX1-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
FOR USE WITH LEFT HAND OIL FILTER
ALSO AN ATTACHMENT
421-2573 KIT-FRONT COVER GASKET
421-2573 KIT-FRONT COVER GASKET
S/N FAT1-UP
FIELD INSTALLATION
PLATE AS-FRONT HOUSING
353-9982 PLATE AS-FRONT HOUSING
353-9982 PLATE AS-FRONT HOUSING
S/N TXG1-UP; LHX1-UP
PART OF 225-3903 HOUSING GP-FRONT
ALSO AN ATTACHMENT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
111-2088 LIFTING GP-ENGINE
111-2088 LIFTING GP-ENGINE
S/N TXG1-UP; LHX1-UP
REAR, LOW PROFILE LIFTING EYE
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
LIFTING GP-ENGINE
111-2355 LIFTING GP-ENGINE
111-2355 LIFTING GP-ENGINE
S/N TXG1-UP; LHX1-UP
FRONT- OFFSET LIFTING EYE
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
CANNOT BE USED WITH ALTERNATOR MOUNTING
ALSO AN ATTACHMENT
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR & COMPR
222-4562 MOUNTING GP-ALTERNATOR & COMPR
222-4562 MOUNTING GP-ALTERNATOR & COMPR
S/N TXG1-UP; LHX1-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
216-5541 SUPPORT GP-ENGINE
216-5541 SUPPORT GP-ENGINE -FRONT
S/N TXG1-9029; LHX1-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
SUPPORT GP-ENGINE
352-8264 SUPPORT GP-ENGINE
352-8264 SUPPORT GP-ENGINE
S/N TXG9030-UP
PART OF 248-8359 ENGINE AR-COMPLETE
SUPPORT GP-ENGINE
9Y-8837 SUPPORT GP-ENGINE
9Y-8837 SUPPORT GP-ENGINE
S/N FAT1-UP
PART OF 248-8362 INSTALLATION AR-ENGINE
TRUNNION GP-ENGINE
192-0542 TRUNNION GP-ENGINE
192-0542 TRUNNION GP-ENGINE
S/N TXG1-UP; LHX1-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
PAN GP-OIL
PAN GP-OIL
251-4300 PAN GP-OIL
251-4300 PAN GP-OIL -ENGINE
S/N LHX1-14778
COMBINED PAN AND OIL LINES WITHOUT THE REAR SCAVENGE SYSTEM
PART OF 248-8359 ENGINE AR-COMPLETE
PAN GP-OIL
251-4300 PAN GP-OIL
251-4300 PAN GP-OIL -ENGINE
S/N TXG1-9029; LHX14779-UP
COMBINED PAN AND OIL LINES WITHOUT THE REAR SCAVENGE SYSTEM
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
PAN GP-OIL
313-3754 PAN GP-OIL
313-3754 PAN GP-OIL -ENGINE
S/N TXG1-UP; LHX14779-UP
PART OF 251-4300 PAN GP-OIL
ALSO AN ATTACHMENT
PAN GP-OIL
455-9179 PAN GP-OIL
455-9179 PAN GP-OIL
S/N TXG9030-UP
PART OF 248-8359 ENGINE AR-COMPLETE
PISTON & ROD GP
PISTON & ROD GP
229-2863 PISTON & ROD GP
229-2863 PISTON & ROD GP
S/N LHX1-4940
18:1 COMPRESSION RATIO
PART OF 241-5929 ENGINE AR-CORE
PISTON & ROD GP
229-2863 PISTON & ROD GP
229-2863 PISTON & ROD GP
S/N LHX4941-7173
18:1 COMPRESSION RATIO
PART OF 241-5929 ENGINE AR-CORE
PISTON & ROD GP
229-2863 PISTON & ROD GP
229-2863 PISTON & ROD GP
S/N LHX7174-8131
18:1 COMPRESSION RATIO
PART OF 241-5929 ENGINE AR-CORE
PISTON & ROD GP
229-2863 PISTON & ROD GP
229-2863 PISTON & ROD GP
S/N LHX8132-15339
18:1 COMPRESSION RATIO
PART OF 241-5929 ENGINE AR-CORE
PISTON & ROD GP
229-2863 PISTON & ROD GP
229-2863 PISTON & ROD GP
S/N LHX15340-18018
18:1 COMPRESSION RATIO
PART OF 241-5929 ENGINE AR-CORE
PISTON & ROD GP
229-2863 PISTON & ROD GP
229-2863 PISTON & ROD GP
S/N LHX18019-24230
18:1 COMPRESSION RATIO
PART OF 241-5929 ENGINE AR-CORE
PISTON & ROD GP
229-2863 PISTON & ROD GP
229-2863 PISTON & ROD GP
S/N TXG1-UP; LHX24231-UP
18:1 COMPRESSION RATIO
PART OF 241-5929, 351-2841 ENGINE AR-CORE
ALSO AN ATTACHMENT
PULLEY GP
DAMPER & PULLEY GP
247-9926 DAMPER & PULLEY GP
247-9926 DAMPER & PULLEY GP
S/N TXG1-UP; LHX1-UP
8 GROOVE POLY-VEE SPUN PULLEY, ADAPTER AND A 13 INCH DAMPER
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
VALVE MECHANISM GP
BASE GP-VALVE COVER & INJ HARN
234-5005 BASE GP-VALVE COVER & INJ HARN
234-5005 BASE GP-VALVE COVER & INJ HARN
S/N LHX1-3945
PART OF 241-5929 ENGINE AR-CORE
BASE GP-VALVE COVER & INJ HARN
278-5662 BASE GP-VALVE COVER & INJ HARN
278-5662 BASE GP-VALVE COVER & INJ HARN
S/N LHX3946-14391
PART OF 241-5929 ENGINE AR-CORE
BASE GP-VALVE COVER & INJ HARN
278-5662 BASE GP-VALVE COVER & INJ HARN
278-5662 BASE GP-VALVE COVER & INJ HARN
S/N TXG1-UP; LHX14392-UP
PART OF 241-5929, 351-2841 ENGINE AR-CORE
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
150-3135 COVER GP-VALVE MECHANISM
150-3135 COVER GP-VALVE MECHANISM
S/N TXG1-UP; LHX24204-UP
PART OF 160-7451 COVER GP-VALVE MECHANISM
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
160-7451 COVER GP-VALVE MECHANISM
160-7451 COVER GP-VALVE MECHANISM
S/N TXG1-UP; LHX24204-UP
PART OF 248-8359, 364-2938 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
160-7452 COVER GP-VALVE MECHANISM
160-7452 COVER GP-VALVE MECHANISM
S/N TXG1-UP; LHX24204-UP
PART OF 160-7451 COVER GP-VALVE MECHANISM
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
225-1147 COVER GP-VALVE MECHANISM
225-1147 COVER GP-VALVE MECHANISM
S/N LHX1-UP
PART OF 236-2230 COVER GP-VALVE MECHANISM
Type 1
COVER GP-VALVE MECHANISM
225-1147 COVER GP-VALVE MECHANISM
225-1147 COVER GP-VALVE MECHANISM
S/N LHX1-UP
PART OF 236-2230 COVER GP-VALVE MECHANISM
Type 2
COVER GP-VALVE MECHANISM
225-1148 COVER GP-VALVE MECHANISM
225-1148 COVER GP-VALVE MECHANISM
S/N LHX1-UP
PART OF 286-7168 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
236-2230 COVER GP-VALVE MECHANISM
236-2230 COVER GP-VALVE MECHANISM
S/N LHX1-UP
PART OF 286-7168 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
286-7168 COVER GP-VALVE MECHANISM
286-7168 COVER GP-VALVE MECHANISM
S/N LHX1-24203
NO OIL FILL
PART OF 248-8359 ENGINE AR-COMPLETE
FASTENER GP-VALVE MECHANISM
109-1657 FASTENER GP-VALVE MECHANISM
109-1657 FASTENER GP-VALVE MECHANISM
S/N LHX1-UP
PART OF 241-5929 ENGINE AR-CORE
FASTENER GP-VALVE MECHANISM
335-2317 FASTENER GP-VALVE MECHANISM
335-2317 FASTENER GP-VALVE MECHANISM
S/N TXG1-UP; LHX24142-UP
PART OF 248-8359 ENGINE AR-COMPLETE, 241-5929 ENGINE AR-CORE
ALSO AN ATTACHMENT
MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
S/N LHX1-4851
PART OF 241-5929 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
S/N LHX4852-4862
PART OF 241-5929 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N LHX4863-24917
PART OF 241-5929 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N TXG1-UP; LHX24918-UP
PART OF 241-5929, 351-2841 ENGINE AR-CORE
Type 1
ALSO AN ATTACHMENT
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N TXG1-UP; LHX24918-UP
PART OF 241-5929, 351-2841 ENGINE AR-CORE
Type 2
ALSO AN ATTACHMENT
ROCKER ARM GP
198-9898 ROCKER ARM GP
198-9898 ROCKER ARM GP
S/N LHX1-4851
PART OF 148-7482 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
278-1929 ROCKER ARM GP
278-1929 ROCKER ARM GP
S/N LHX4863-24917
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
278-1931 ROCKER ARM GP
278-1931 ROCKER ARM GP
S/N LHX4852-4862
PART OF 148-7482 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
320-2796 ROCKER ARM GP
320-2796 ROCKER ARM GP
S/N TXG1-UP; LHX4863-UP
PART OF 328-4236 ROCKER ARM GP
ALSO AN ATTACHMENT
ROCKER ARM GP
328-4236 ROCKER ARM GP
328-4236 ROCKER ARM GP -NON-BRAKE
S/N TXG1-UP; LHX24918-UP
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
ALSO AN ATTACHMENT
ROCKER ARM GP
328-4238 ROCKER ARM GP
328-4238 ROCKER ARM GP
S/N TXG1-UP; LHX4863-UP
PART OF 328-4236 ROCKER ARM GP
ALSO AN ATTACHMENT
ROCKER ARM GP
437-3862 ROCKER ARM GP
437-3862 ROCKER ARM GP
S/N TXG1-UP; LHX24918-UP
PART OF 437-3865 ROCKER ARM GP
ALSO AN ATTACHMENT
ROCKER ARM GP
437-3864 ROCKER ARM GP
437-3864 ROCKER ARM GP
S/N TXG1-UP; LHX24918-UP
PART OF 437-3865 ROCKER ARM GP
ALSO AN ATTACHMENT
437-3865 ROCKER ARM GP
437-3865 ROCKER ARM GP
S/N TXG1-UP; LHX24918-UP
NON BRAKE
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
ALSO AN ATTACHMENT
YOKE GP
YOKE GP
128-3339 YOKE GP
128-3339 YOKE GP
S/N FAT1-UP
PART OF 248-8362 INSTALLATION AR-ENGINE
HOUSING GP-REAR
421-2602 KIT-REAR COVER GASKET
421-2602 KIT-REAR COVER GASKET
S/N FAT1-UP
FIELD INSTALLATION
COVER GP-ENGINE
421-2573 KIT-FRONT COVER GASKET
421-2573 KIT-FRONT COVER GASKET
S/N FAT1-UP
FIELD INSTALLATION

Information:

(For parts list, see above)

Disassembly and Assembly
Air Compressor - Remove and Install - If Equipped
C15 and C18 Engines for Caterpillar Built Machines
Air Compressor Drive Gear - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Specifications
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner - Alternator and Compressor
C15 and C18 Engines for Caterpillar Built Machines
Belt Tensioner
C15 and C18 Engines for Caterpillar Built Machines
Compression Brake - If Equipped
C15 and C18 Engines for Caterpillar Built Machines
Compression Brake
C15 and C18 Engines for Caterpillar Built Machines
Systems Operation
Compression Brake - If Equipped
C15 and C18 Engines for Caterpillar Built Machines
Testing and Adjusting
Compression Brake Lash - Adjust - If Equipped
C15 and C18 Engines for Caterpillar Built Machines
Specifications
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Gear - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C15 and C18 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C15 and C18 Engines for Caterpillar Built Machines
Camshaft - Remove
C15 and C18 Engines for Caterpillar Built Machines
Camshaft - Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
A New Improved Cam Gear Is Now Available for the Engines of Certain Machines {1212}
2013/06/19
Improved Camshafts Are Now Used on Certain C15 and C18 Machine Engines {1210}
2013/11/21
Special Instruction
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Specifications
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft
C15 and C18 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Front Seal and Wear Sleeve - Remove and Install
587T Pipelayer
Engine Supplement
Crankshaft Rear Seal - Install
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft - Remove
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft - Install
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2006/06/26
A New Type of Main Bearing is Available {1202, 1203}
2008/09/29
Truck Engine News
The Primer Color Has Changed for All C15 and C18 Truck Engine Blocks {1201, 7559}
2012/12/21
Engine News
The Primer Color Has Changed for All C15 and C18 Commercial Engine Blocks {1201, 7559}
2012/12/21
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Specifications
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner
C15 and C18 Engines for Caterpillar Built Machines
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Block
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Block
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Block
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Block
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Block
C15 and C18 Engines for Caterpillar Built Machines
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Main Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Block
C15 and C18 Engines for Caterpillar Built Machines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C15 and C18 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner - Install
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
C15 and C18 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C15 and C18 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
The Primer Color Has Changed for All C15 and C18 Machine Engine Blocks {1201, 7559}
2012/12/21
Cylinder Head And Spacer Plate Gasket Failures On Certain Machine Engines {1100, 1201}
2015/05/15
Engine News
Two Adjustment Gauges Help the Technician Set the Lash for the Variable Valve Actuators {0703, 0763, 1100, 1209}
2006/02/13
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Specifications
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head Valves
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head
C15 and C18 Engines for Caterpillar Built Machines
Tool Operating Manual
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C15 and C18 Engines for Caterpillar Built Machines
Troubleshooting
Valve Rotator or Spring Lock Is Free
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Bearings - Remove
C15 and C18 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Install
C15 and C18 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head - Remove
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Head - Install
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Remove
C15 and C18 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
A New Outer Valve Spring Is Now Used {1100, 1108}
2008/12/01
Cylinder Head And Spacer Plate Gasket Failures On Certain Machine Engines {1100, 1201}
2015/05/15
Specifications
Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Vibration Damper and Pulley - Remove and Install
587T Pipelayer
Engine Supplement
Specifications
Fan Drive
C15 and C18 Engines for Caterpillar Built Machines
Fan Drive
C15 and C18 Engines for Caterpillar Built Machines
Fan Drive
C15 and C18 Engines for Caterpillar Built Machines
Fan Drive
C15 and C18 Engines for Caterpillar Built Machines
Fan Drive
C15 and C18 Engines for Caterpillar Built Machines
Fan Drive
C15 and C18 Engines for Caterpillar Built Machines
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Remove
C15 and C18 Engines for Caterpillar Built Machines
Flywheel - Install
C15 and C18 Engines for Caterpillar Built Machines
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Rear)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Rear)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Rear)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Rear)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Rear)
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Rear)
C15 and C18 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Gear Group (Front) - Remove
C15 and C18 Engines for Caterpillar Built Machines
Gear Group (Front) - Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
A New Improved Cam Gear Is Now Available for the Engines of Certain Machines {1212}
2013/06/19
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/21
Specifications
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C15 and C18 Engines for Caterpillar Built Machines
Testing and Adjusting
Flywheel Housing - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Flywheel Housing - Remove and Install - Equipped with Rear Power Take-Off
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
An Improved Seal is Used {1157, 7555}
2009/02/09
Specifications
Housing (Front)
C15 and C18 Engines for Caterpillar Built Machines
Housing (Front)
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Housing (Front)
C15 and C18 Engines for Caterpillar Built Machines
Housing (Front)
C15 and C18 Engines for Caterpillar Built Machines
Housing (Front)
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Seals
C15 and C18 Engines for Caterpillar Built Machines
Housing (Front)
C15 and C18 Engines for Caterpillar Built Machines
Cover Group (Front Housing)
C15 and C18 Engines for Caterpillar Built Machines
Housing (Front)
C15 and C18 Engines for Caterpillar Built Machines
Cover Group (Front Housing)
C15 and C18 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Housing (Front) - Remove
C15 and C18 Engines for Caterpillar Built Machines
Housing (Front) - Install
C15 and C18 Engines for Caterpillar Built Machines
Front Cover - Remove
C15 and C18 Engines for Caterpillar Built Machines
Front Cover - Install
C15 and C18 Engines for Caterpillar Built Machines
Special Instruction
Procedure to Replace the Muffler Mounting Brackets and Hardware on Certain PL83 and PL87 Pipelayers {1051, 1062, 1122}
Procedure to Replace the Muffler Mounting Brackets and Hardware on Certain PL83 and PL87 Pipelayers {1051, 1062, 1122}
Tool Operating Manual
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
Service Magazine
Improved Muffler Bracket is Now Used on Certain Pipelayers {1051, 1062, 1122}
Improved Muffler Bracket is Now Used on Certain Pipelayers {1051, 1062, 1122}
Specifications
Engine Trunnion
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Engine Support (Front) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Engine Trunnion - Remove and Install
587T Pipelayer
Engine Supplement
Operation and Maintenance Manual
Engine Oil Level - Check
587T Pipelayer
Engine Oil Sample - Obtain
587T Pipelayer
Special Instruction
Single Piece Oil Pan Rework for Certain D8T Track-Type Tractors and Pipelayers {1302}
Single Piece Oil Pan Rework for Certain D8T Track-Type Tractors and Pipelayers {1302}
Specifications
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pan
C15 and C18 Engines for Caterpillar Built Machines
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Oil Pan - Remove
587T Pipelayer
Engine Supplement
Oil Pan - Install
587T Pipelayer
Engine Supplement
Engine Oil Pan - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
An Improved Three-Piece Oil Pan Gasket is Now Used {1302, 7555}
2007/12/31
A New Oil Pan Gasket Is Available for Certain C15 and C18 Tier 3 Machine Engines {1302, 7555}
2012/04/17
A New Single Piece Oil Pan Is Now Used On Certain D8T Track-Type Tractors and Pipelayers {1302}
2015/09/16
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Piston and Rings
C15 and C18 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONAL LONG BLOCK/SHORT BLOCK OPTIONS FOR C15 ENGINE APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL LONG BLOCK/SHORT BLOCK OPTIONS FOR C15 ENGINE APPLICATIONS
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
C15 and C18 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
C15 and C18 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
C15 and C18 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C15 and C18 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C15 and C18 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C15 and C18 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C15 and C18 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Remove - If Equipped
C15 and C18 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Install - If Equipped
C15 and C18 Engines for Caterpillar Built Machines
Specifications
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Vibration Damper and Pulley
C15 and C18 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Engine News
Two Adjustment Gauges Help the Technician Set the Lash for the Variable Valve Actuators {0703, 0763, 1100, 1209}
2006/02/13
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belt - Inspect/Replace
587T Pipelayer
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Two Adjustment Gauges Help the Technician Set the Lash for the Variable Valve Actuators {0703, 0763, 1100, 1209}
2006/02/13
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
587T Pipelayer
Engine Valve Lash - Check
587T Pipelayer
Special Instruction
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Specifications
Electronic Unit Injector Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Rocker Shaft
C15 and C18 Engines for Caterpillar Built Machines
Valve Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Variable Valve Actuator
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Valve Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C15 and C18 Engines for Caterpillar Built Machines
Electronic Unit Injector Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Variable Valve Actuator
C15 and C18 Engines for Caterpillar Built Machines
Valve Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Valve Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Valve Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism
C15 and C18 Engines for Caterpillar Built Machines
Variable Valve Actuator
C15 and C18 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
REMANUFACTURED UNIT INJECTOR ROCKER ARM ASSEMBLIES FOR CERTAIN C15 ENGINE APPLICATIONS
REMANUFACTURED UNIT INJECTOR ROCKER ARM ASSEMBLIES FOR CERTAIN C15 ENGINE APPLICATIONS
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
C15 and C18 Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
C15 and C18 Engines for Caterpillar Built Machines
Troubleshooting
Excessive Valve Lash
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Rocker Arm and Shaft - Install
C15 and C18 Engines for Caterpillar Built Machines
Rocker Arm - Disassemble
C15 and C18 Engines for Caterpillar Built Machines
Rocker Arm - Assemble
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C15 and C18 Engines for Caterpillar Built Machines
Valve Actuator (Variable) - Remove
C15 and C18 Engines for Caterpillar Built Machines
Valve Actuator (Variable) - Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Valve Bridges are Included with Cylinder Heads {1102, 1123}
2010/05/17
A New Harness is Now Used {1120, 1408}
2008/02/11
A New Rocker Arm Assembly is Available {1123}
2008/08/25
A New Rocker Arm Assembly is Available {1123}
2009/02/02
A New Screw Is Available for the Rocker Arm Assemblies of Some Machine Engines {1123}
2011/02/11
A New Rocker Arm Assembly Is Available for Certain Machine Engines {1123}
2012/07/12
A New Rocker Shaft Bolt Is Used on Certain Machines Equipped with C15 and C18 Engines {1102, 7553}
2010/11/17
A New Valve Bridge Is Available for Certain Machines {1121}
2011/01/20
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
An Improved Valve Cover Seal Is Used on Certain Machine Engines {1107, 7553, 7555}
2014/07/22
Updated Torque Requirements for Reman Rocker Arm Adjusting Screw Lock Nuts on Certain C15, C18, C27, and C32 Machine Engines {1123}
2015/03/25
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

Caterpillar 587T
 
Caterpillar 587T
- pipelayers
CATERPILLAR FINANCIAL SERVICES CORPORATION
Caterpillar 587T, rohrverleger, Bau-Und Bergbauausrüstung
373.000 
Caterpillar 587T, rohrverleger, Bau-Und Bergbauausrüstung
- pipelayers
CATERPILLAR FINANCIAL SERVICES CORPORATION
Caterpillar 587T, rohrverleger, Bau-Und Bergbauausrüstung
 
Caterpillar 587T, rohrverleger, Bau-Und Bergbauausrüstung
- pipelayers
CATERPILLAR FINANCIAL SERVICES CORPORATION
Caterpillar 587T, rohrverleger, Bau-Und Bergbauausrüstung
373.000 
Caterpillar 587T, rohrverleger, Bau-Und Bergbauausrüstung
- pipelayers
CATERPILLAR FINANCIAL SERVICES CORPORATION
Caterpillar 587T, rohrverleger, Bau-Und Bergbauausrüstung
395.000 
Caterpillar 587T, rohrverleger, Bau-Und Bergbauausrüstung
- pipelayers
CATERPILLAR FINANCIAL SERVICES CORPORATION
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.