IMPLEMENTS
BULLDOZER GPC-FRAME GP
BULLDOZER GP
IMPLEMENTS
BULLDOZER GP
#SEBP44500730
252-5855: BULLDOZER AR-SEMI-UNIVERSAL
252-5855 BULLDOZER AR-SEMI-UNIVERSAL
S/N P6A1-UP
FOR USE WITH @@@@@227-4005@@@@@, @@@@@227-4006@@@@@, @@@@@238-9559@@@@@
AN ATTACHMENT
S/N P6A1-UP
FOR USE WITH @@@@@227-4005@@@@@, @@@@@227-4006@@@@@, @@@@@238-9559@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 109-1352 Y | [1] | TRUNNION GP-BULLDOZER | |
| 2. | 252-5849 Y | [1] | LINES GP-TILT CYLINDER | |
| 3. | 252-5853 Y | [1] | PUSH ARM GP | |
| 4. | 252-5856 Y | [1] | BLADE GP-SEMI-UNIVERSAL | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON UPPER RH CORNER OF BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44500731
251-6130: BULLDOZER AR-STRAIGHT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 109-1352 Y | [1] | TRUNNION GP-BULLDOZER | |
| 2. | 227-4005 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 3. | 227-4006 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 4. | 238-9559 Y | [1] | MOUNTING GP-CYLINDER | |
| 5. | 252-5849 Y | [1] | LINES GP-TILT CYLINDER | |
| 6. | 252-5850 Y | [1] | BLADE GP-STRAIGHT | |
| 7. | 252-5853 Y | [1] | PUSH ARM GP | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44500732
251-6131: BULLDOZER AR-STRAIGHT
251-6131 BULLDOZER AR-STRAIGHT
S/N P6S1-UP
FOR USE WITH @@@@@227-4005@@@@@, @@@@@227-4006@@@@@, @@@@@238-9559@@@@@
AN ATTACHMENT
S/N P6S1-UP
FOR USE WITH @@@@@227-4005@@@@@, @@@@@227-4006@@@@@, @@@@@238-9559@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 109-1352 Y | [1] | TRUNNION GP-BULLDOZER | |
| 2. | 252-5849 Y | [1] | LINES GP-TILT CYLINDER | |
| 3. | 252-5850 Y | [1] | BLADE GP-STRAIGHT | |
| 4. | 252-5853 Y | [1] | PUSH ARM GP | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44500733
255-8952: C-FRAME AS
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6J-9187 | [1] | BRACKET AS (RH) | |
| 2. | 6J-9188 | [1] | BRACKET AS (LH) | |
| (EACH BRACKET AS INCLUDES) | ||||
| 4J-2414 | [1] | TRUNNION | ||
| 7J-2595 | [2] | BRACKET | ||
| 3. | 8P-9770 | [1] | PLATE | |
| 4. | 9W-4897 | [6] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 3J-2682 | [1] | BRACKET | ||
| 8F-4387 | [2] | PLATE | ||
| 5. | 9W-5375 | [2] | BAR | |
| 6. | 9W-9000 | [1] | ADAPTER AS | |
| 5M-6214 | [1] | PLUG (1/8-27 PTF) | ||
| 8E-5486 | [2] | BUSHING | ||
| 7. | 251-9835 | [2] | BEARING | |
#SEBP44500734
251-9830: C-FRAME GP
251-9830 C-FRAME GP
S/N 1AR1-UP
PART OF 251-6112, 251-6113 BULLDOZER AR-ANGLING
AN ATTACHMENT
S/N 1AR1-UP
PART OF 251-6112, 251-6113 BULLDOZER AR-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0725 | [1] | RETAINER | |
| 2. | 4T-4866 B | [52] | SHIM (0.8-MM THK) | |
| 3. | 251-8203 M | [4] | NUT-SQUARE (M24X3-THD) | |
| 4. | 251-9831 | [1] | C-FRAME AS | |
| 4J-2414 | [1] | TRUNNION | ||
| 8E-5486 | [2] | BUSHING | ||
| 251-9835 | [2] | BEARING | ||
| 5. | 251-9832 | [1] | PIN-PIVOT | |
| 6. | 251-9836 | [2] | CAP-BEARING | |
| 7. | 7X-2562 M | [2] | BOLT (M20X2.5X45-MM) | |
| 8. | 7X-2567 M | [4] | BOLT (M24X3X160-MM) | |
| 9. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP44500735
255-8951: C-FRAME GP
255-8951 C-FRAME GP
S/N A6C1-UP
PART OF 251-6128, 251-6129 BULLDOZER AR-ANGLING
AN ATTACHMENT
S/N A6C1-UP
PART OF 251-6128, 251-6129 BULLDOZER AR-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0725 | [1] | RETAINER | |
| 2. | 251-8203 M | [4] | NUT-SQUARE (M24X3-THD) | |
| 3. | 251-9832 | [1] | PIN-PIVOT | |
| 4. | 251-9836 | [2] | CAP-BEARING | |
| 5. | 255-8952 Y | [1] | C-FRAME AS | |
| 6. | 7X-2562 M | [2] | BOLT (M20X2.5X45-MM) | |
| 7. | 7X-2567 M | [4] | BOLT (M24X3X160-MM) | |
| 8. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 9. | 4T-4866 B | [52] | SHIM (0.8-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44500736
230-5554: PUSH ARM GP
230-5554 PUSH ARM GP
S/N MGH1-UP
PART OF 230-5553, 251-6120 BULLDOZER AR-SEMI-UNIVERSAL
Type 1
AN ATTACHMENT
S/N MGH1-UP
PART OF 230-5553, 251-6120 BULLDOZER AR-SEMI-UNIVERSAL
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 282-9090 | [2] | RETAINER | |
| 2. | 4T-1520 | [1] | CAGE AS | |
| 2A. | 6J-5383 | [1] | BEARING | |
| 3. | 4T-4866 B | [52] | SHIM (0.8-MM THK) | |
| 4. | 7Y-5235 M | [4] | BOLT (M24X3X190-MM) | |
| 5. | 8E-5703 B | [78] | SHIM (0.8-MM THK) | |
| 6. | 8J-2880 | [3] | CAP AS-BEARING | |
| 7. | 124-9672 | [1] | BRACE AS-TILT | |
| 8. | 160-6305 | [2] | CAP AS-BEARING | |
| 9. | 194-0935 | [1] | PUSH ARM AS (LH) | |
| 9A. | 4T-0780 | [1] | TRUNNION | |
| 9B. | 8P-9770 | [1] | PLATE | |
| 9C. | 124-9666 | [1] | BRACKET | |
| 9D. | 179-6152 | [1] | BEARING | |
| 9E. | 179-6153 | [1] | BEARING | |
| 9F. | 209-2152 | [1] | BAR | |
| 10. | 194-0936 | [1] | PUSH ARM AS (RH) | |
| 10A. | 4T-0732 | [1] | BRACKET | |
| 10B. | 8P-9770 | [1] | PLATE | |
| 10C. | 9W-2579 | [1] | PLATE | |
| 10D. | 179-6152 | [1] | BEARING | |
| 10E. | 179-6153 | [1] | BEARING | |
| 10F. | 209-2152 | [1] | BAR | |
| 11. | 233-9134 Y | [1] | CYLINDER GP-TILT | |
| 12. | 251-8202 M | [8] | NUT-SQUARE (M20X2.5-THD) | |
| 13. | 251-8203 M | [4] | NUT-SQUARE (M24X3-THD) | |
| 14. | 8T-4779 M | [2] | BOLT (M16X2X35-MM) | |
| 15. | 290-8226 | [2] | PIN | |
| 16. | 7X-2566 M | [6] | BOLT (M20X2.5X110-MM) | |
| 17. | 8C-8478 M | [12] | BOLT (M20X2.5X140-MM) | |
| 18. | 8T-4123 | [6] | WASHER (22X35X3.5-MM THK) | |
| 19. | 8T-4131 M | [10] | NUT (M20X2.5-THD) | |
| 20. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 21. | 8T-5439 | [6] | WASHER-HARD (21.5X45X6-MM THK) | |
| 22. | 9X-8257 | [1] | WASHER (17.5X30X3.5-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44500737
230-5554: PUSH ARM GP
230-5554 PUSH ARM GP
S/N MGH1-UP
PART OF 230-5553, 251-6120 BULLDOZER AR-SEMI-UNIVERSAL
Type 2
AN ATTACHMENT
S/N MGH1-UP
PART OF 230-5553, 251-6120 BULLDOZER AR-SEMI-UNIVERSAL
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 282-9090 | [2] | RETAINER | |
| 2. | 4T-1520 | [1] | CAGE AS | |
| 2A. | 6J-5383 | [1] | BEARING | |
| 3. | 4T-4866 B | [52] | SHIM (0.8-MM THK) | |
| 4. | 7Y-5235 M | [4] | BOLT (M24X3X190-MM) | |
| 5. | 8E-5703 B | [78] | SHIM (0.8-MM THK) | |
| 6. | 8J-2880 | [3] | CAP AS-BEARING | |
| 7. | 124-9672 | [1] | BRACE AS-TILT | |
| 8. | 160-6305 | [2] | CAP AS-BEARING | |
| 9. | 194-0935 | [1] | PUSH ARM AS (LH) | |
| 10. | 194-0936 | [1] | PUSH ARM AS (RH) | |
| 11. | 367-9478 CY | [1] | CYLINDER GP-TILT | |
| 12. | 251-8202 M | [8] | NUT-SQUARE (M20X2.5-THD) | |
| 13. | 251-8203 M | [4] | NUT-SQUARE (M24X3-THD) | |
| 14. | 8T-4779 M | [2] | BOLT (M16X2X35-MM) | |
| 15. | 290-8226 | [2] | PIN | |
| 16. | 7X-2566 M | [6] | BOLT (M20X2.5X110-MM) | |
| 17. | 8C-8478 M | [12] | BOLT (M20X2.5X140-MM) | |
| 18. | 8T-4123 | [6] | WASHER (22X35X3.5-MM THK) | |
| 19. | 8T-4131 M | [10] | NUT (M20X2.5-THD) | |
| 20. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 21. | 8T-5439 | [6] | WASHER-HARD (21.5X45X6-MM THK) | |
| 22. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44500738
252-5853: PUSH ARM GP
252-5853 PUSH ARM GP
S/N P6A1-UP; P6S1-UP
PART OF 252-5854, 252-5855 BULLDOZER AR-SEMI-UNIVERSAL, 251-6130, 251-6131 BULLDOZER AR-STRAIGHT
Type 1
AN ATTACHMENT
S/N P6A1-UP; P6S1-UP
PART OF 252-5854, 252-5855 BULLDOZER AR-SEMI-UNIVERSAL, 251-6130, 251-6131 BULLDOZER AR-STRAIGHT
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-1520 | [1] | CAGE AS | |
| 1A. | 6J-5383 | [1] | BEARING | |
| 2. | 4T-4866 B | [52] | SHIM (0.8-MM THK)(EACH) | |
| 3. | 7Y-5235 M | [4] | BOLT (M24X3X190-MM) | |
| 4. | 8E-5703 B | [78] | SHIM (0.8-MM THK)(EACH) | |
| 5. | 8J-2880 | [3] | CAP AS-BEARING | |
| 6. | 124-9672 | [1] | BRACE AS-TILT | |
| 7. | 160-6305 | [2] | CAP AS-BEARING | |
| 8. | 233-9134 Y | [1] | CYLINDER GP-TILT | |
| 9. | 179-6151 | [1] | PUSH ARM AS (LH) | |
| 9A. | 4T-0780 | [1] | TRUNNION | |
| 9B. | 8P-9770 | [1] | PLATE | |
| 9C. | 124-9666 | [1] | BRACKET | |
| 9D. | 179-6152 | [1] | BEARING | |
| 9E. | 179-6153 | [1] | BEARING | |
| 9F. | 209-2152 | [1] | BAR | |
| 10. | 179-6162 | [1] | PUSH ARM AS (RH) | |
| 10A. | 4T-0732 | [1] | BRACKET | |
| 10B. | 8P-9770 | [1] | PLATE | |
| 10C. | 9W-2579 | [2] | PLATE | |
| 10D. | 179-6152 | [1] | BEARING | |
| 10E. | 179-6153 | [1] | BEARING | |
| 10F. | 209-2152 | [1] | BAR | |
| 11. | 251-8202 M | [8] | NUT-SQUARE (M20X2.5-THD) | |
| 12. | 251-8203 M | [4] | NUT-SQUARE (M24X3-THD) | |
| 13. | 290-8226 | [2] | PIN | |
| 14. | 282-9090 | [2] | RETAINER | |
| 15. | 7X-2566 M | [6] | BOLT (M20X2.5X110-MM) | |
| 16. | 8C-8478 M | [12] | BOLT (M20X2.5X140-MM) | |
| 17. | 8T-4123 | [6] | WASHER (22X35X3.5-MM THK) | |
| 18. | 8T-4131 M | [10] | NUT (M20X2.5-THD) | |
| 19. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 20. | 8T-4779 M | [2] | BOLT (M16X2X35-MM) | |
| 21. | 8T-5439 | [6] | WASHER-HARD (21.5X45X6-MM THK) | |
| 22. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44500739
252-5853: PUSH ARM GP
252-5853 PUSH ARM GP
S/N P6A1-UP; P6S1-UP
PART OF 252-5854, 252-5855 BULLDOZER AR-SEMI-UNIVERSAL, 251-6130, 251-6131 BULLDOZER AR-STRAIGHT
Type 2
AN ATTACHMENT
S/N P6A1-UP; P6S1-UP
PART OF 252-5854, 252-5855 BULLDOZER AR-SEMI-UNIVERSAL, 251-6130, 251-6131 BULLDOZER AR-STRAIGHT
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-1520 | [1] | CAGE AS | |
| 1A. | 6J-5383 | [1] | BEARING | |
| 2. | 4T-4866 B | [52] | SHIM (0.8-MM THK)(EACH) | |
| 3. | 7Y-5235 M | [4] | BOLT (M24X3X190-MM) | |
| 4. | 8E-5703 B | [78] | SHIM (0.8-MM THK)(EACH) | |
| 5. | 8J-2880 | [3] | CAP AS-BEARING | |
| 6. | 124-9672 | [1] | BRACE AS-TILT | |
| 7. | 160-6305 | [2] | CAP AS-BEARING | |
| 8. | 367-9478 CY | [1] | CYLINDER GP-TILT | |
| 9. | 179-6151 | [1] | PUSH ARM AS (LH) | |
| 9A. | 4T-0780 | [1] | TRUNNION | |
| 9B. | 8P-9770 | [1] | PLATE | |
| 9C. | 124-9666 | [1] | BRACKET | |
| 9D. | 179-6152 | [1] | BEARING | |
| 9E. | 179-6153 | [1] | BEARING | |
| 9F. | 209-2152 | [1] | BAR | |
| 10. | 179-6162 | [1] | PUSH ARM AS (RH) | |
| 10A. | 4T-0732 | [1] | BRACKET | |
| 10B. | 8P-9770 | [1] | PLATE | |
| 10C. | 9W-2579 | [2] | PLATE | |
| 10D. | 179-6152 | [1] | BEARING | |
| 10E. | 179-6153 | [1] | BEARING | |
| 10F. | 209-2152 | [1] | BAR | |
| 11. | 251-8202 M | [8] | NUT-SQUARE (M20X2.5-THD) | |
| 12. | 251-8203 M | [4] | NUT-SQUARE (M24X3-THD) | |
| 13. | 290-8226 | [2] | PIN | |
| 14. | 282-9090 | [2] | RETAINER | |
| 15. | 7X-2566 M | [6] | BOLT (M20X2.5X110-MM) | |
| 16. | 8C-8478 M | [12] | BOLT (M20X2.5X140-MM) | |
| 17. | 8T-4123 | [6] | WASHER (22X35X3.5-MM THK) | |
| 18. | 8T-4131 M | [10] | NUT (M20X2.5-THD) | |
| 19. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 20. | 8T-4779 M | [2] | BOLT (M16X2X35-MM) | |
| 21. | 8T-5439 | [6] | WASHER-HARD (21.5X45X6-MM THK) | |
| 22. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
IMPLEMENTS
BULLDOZER GP
Special Instruction
Installation of the 6A (S/N: A6C; 1AR; A6B; MMX) Bulldozer on a D6T Track-Type Tractor{6051, 6078}
Installation of the 6A (S/N: A6C; 1AR; A6B; MMX) Bulldozer on a D6T Track-Type Tractor{6051, 6078}
Installation of the 6A (S/N: A6C; 1AR; A6B; MMX) Bulldozer on a D6T Track-Type Tractor{6051, 6078}
