AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

272-4774 STARTING MOTOR GP-ELECTRIC S/N 6LK1-UP PART OF 266-6186 ENGINE AR Type 1 311C EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
SWITCH GP
WIRING GP

EXCAVATOR 311C EXCAVATOR PAD
 311C U Excavator PAD00001-UP (MACHINE) POWERED BY 3064 Engine SEBP4452 311C PAD   (2004)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
MOUNTING GP-STARTING MOTOR
125-2963 MOUNTING GP-STARTING MOTOR
STARTING MOTOR GP-ELECTRIC
272-4774 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
272-4774 STARTING MOTOR GP-ELECTRIC
 

#SEBP44520080
 

272-4774: STARTING MOTOR GP-ELECTRIC

272-4774 STARTING MOTOR GP-ELECTRIC
S/N 6LK1-UP
PART OF 266-6186 ENGINE AR
Type 1
i02431348 SEBP4452
2724774 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-5947 [1] SETSCREW  
2. 233-1281 [1] BRACKET AS  
  127-5937 [1] BEARING AS  
3. 127-5944 [1] LEVER AS  
4. 135-2364 [1] SWITCH AS (STARTING MOTOR)  
5. 127-5948 [1] BALL  
6. 127-5949 [1] PACKING AS  
7. 127-5950 [1] ARMATURE AS  
  095-0410 [1] BEARING  
8. 095-0085 [1] BOLT SET  
9. 279-7750 [1] PINION SET  
  094-9950 [1] STOP SET  
10. 233-1279 [1] SHAFT GP-MOTOR  
  127-5939 [1] SHAFT AS-GEAR  
  127-5940 [1] WASHER AS  
  127-5941 [1] GEAR AS-INTERNAL  
  127-5943 [4] GEAR AS (55/138-TEETH)  
  233-1280 [1] CLUTCH  
11. 094-9980 [2] GASKET  
12. 127-5952 [1] YOKE AS  
  127-5953 [2] BRUSH  
13. 127-5955 [1] HOLDER AS-BRUSH  
  127-5956 [4] SPRING  
14. 135-2366 [1] BRACKET  
 

#SEBP44520081
 

272-4774: STARTING MOTOR GP-ELECTRIC

272-4774 STARTING MOTOR GP-ELECTRIC
S/N 6LK1-UP
PART OF 266-6186 ENGINE AR
Type 2
i02646437 SEBP4452
2724774 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-5947 [1] SETSCREW  
2. 294-1855 C [1] BRACKET AS  
  127-5937 [1] BEARING AS  
3. 127-5944 [1] LEVER AS  
4. 294-1857 C [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
5. 127-5948 [1] BALL  
6. 127-5949 [1] PACKING AS  
7. 127-5950 [1] ARMATURE AS  
  095-0410 [1] BEARING  
8. 095-0085 [1] BOLT SET  
9. 279-7750 [1] PINION SET  
  094-9950 [1] STOP SET  
10. 233-1279 [1] SHAFT GP-MOTOR  
  127-5939 [1] SHAFT AS-GEAR  
  127-5940 [1] WASHER AS  
  127-5941 [1] GEAR AS-INTERNAL  
  127-5943 [4] GEAR AS (55/138-TEETH)  
  233-1280 [1] CLUTCH  
11. 094-9980 [2] GASKET  
12. 127-5952 [1] YOKE AS  
  127-5953 [2] BRUSH  
13. 294-1858 C [1] HOLDER AS  
14. 135-2366 [1] BRACKET  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP44520082
 

7N-0718: SWITCH GP-DISCONNECT

7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N PAD1-UP
PART OF 213-0607 PANEL GP-CIRCUIT BREAKER
i01213345 SEBP4452
7N0718 SWITCH GP-DISCONNECT Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3922 [2] LOCKWASHER  
2. 8H-5303 [1] NUT (3/4-16-THD)  
3. 9F-5644 [2] LOCKWASHER  
4. 6F-7045 [2] NUT-FULL (3/8-24-THD)  
5. 8H-5306 [1] KEY (BATTERY DISCONNECT)  
 

#SEBP44520083
 

7Y-3918: SWITCH GP-HEAT START

7Y-3918 SWITCH GP-HEAT START -KEY
S/N PAD1-UP
PART OF 213-0639 WIRING GP-CONSOLE
i01206638 SEBP4452
7Y3918 SWITCH GP-HEAT START Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8276 [1] NUT  
2. 5I-8275 [1] LOCKWASHER  
3. 5I-8274 [1] WASHER (20.5X29X0.8-MM THK)  
4. 095-0735 M [6] SCREW-MACHINE (M5X0.8X8-MM)  
5. 096-0192 [6] LOCKWASHER (EXTERNAL TOOTH)  
  M   METRIC PART
 

#SEBP44520084
 

259-5274: SWITCH GP-MAGNETIC

259-5274 SWITCH GP-MAGNETIC
S/N PAD1-UP
24-VOLT
PART OF 213-0607 PANEL GP-CIRCUIT BREAKER
i02420131 SEBP4452
2595274 SWITCH GP-MAGNETIC Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 1H-3338 [2] LOCKWASHER (EXTERNAL TOOTH)  
4. 012-0380 [2] LOCKWASHER (6.5X12.5X1.6-MM THK)(SPLIT)  
5. 5C-2890 M [2] NUT (M6X1-THD)  
  M   METRIC PART
 

#SEBP44520085
 

106-0107: SWITCH GP-ROTARY

106-0107 SWITCH GP-ROTARY
S/N PAD1-UP
PART OF 213-0639 WIRING GP-CONSOLE
i02164374 SEBP4452
1060107 SWITCH GP-ROTARY Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
3. 8T-8737 [1] PLUG-SEAL  
4. 144-1636 [5] PIN-CONNECTOR (14-GA TO 18-GA)  
5. 7Y-5458 M [1] NUT (M12X1-THD)  
6. 7Y-5464 [1] WASHER (12.2X15.4X0.5-MM THK)  
7. 106-0210 [1] SEAL  
  M   METRIC PART
 

#SEBP44520086
 

167-3502: WIRING GP-CAB

167-3502 WIRING GP-CAB
S/N PAD1-UP
PART OF 284-4513, 305-0298, 305-0299, 305-0302 CAB GP
i02425644 SEBP4452
1673502 WIRING GP-CAB Parts scheme 1673502 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 259-4883 C [1] ANTENNA AS  
  259-5082 [1] CABLE AS  
2. 163-6795 [11] STRAP-CABLE  
3. 8T-6693 M [2] SCREW-MACHINE (M5X0.8X16-MM)  
4. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
5. 6V-9669 M [2] SCREW-MACHINE (M3X0.5X8-MM)  
6. 3C-6969 M [2] NUT (M3X0.5-THD)  
7. 167-3612 [1] PANEL AS-CONTROL  
8. 9W-1494 [1] KIT-SERVICE METER (24-VOLT)  
    (INCLUDES WIRE AS, STRAP CABLES, SERVICE METER FILM & SERVICE METER)
9. 196-1618 [1] BRACKET  
  197-0393 M [2] BOLT-SOCKET HEAD  
10. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
11. 101-2846 CE GUARD (18-CM)  
12. 213-0569 [1] HARNESS AS-CAB (ENGINE, PUMP CONTROL)  
  167-3631 [2] TERMINAL (FEMALE)  
  7Y-3950 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  121-1159 [2] TERMINAL (MALE)  
  170-6827 [22] TERMINAL (MALE)  
  2L-8066 [5] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  2L-8075 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  5P-2321 [1] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  143-1570 [1] TERMINAL AS  
  7Y-3963 [1] TERMINAL-BULLET (FEMALE)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M)  
  7Y-3951 [7] TERMINAL-BLADE (14-GA)  
  102-7965 [14] TERMINAL (FEMALE)  
  121-1157 [2] TERMINAL (FEMALE)  
  125-4785 [17] TERMINAL (FEMALE)  
  153-2540 [10] TERMINAL (FEMALE)  
  153-2631 [2] TERMINAL (FEMALE)  
  7Y-3952 [1] PLUG-CONNECTOR (2-PIN)  
  7Y-3958 [1] CONNECTOR-PLUG (6-PIN)  
  111-4816 [1] PLUG-CONNECTOR (13-PIN)  
  121-1156 [1] CONNECTOR-PLUG  
  153-2541 [1] PLUG-CONNECTOR (10-PIN)  
  163-6659 [1] CONNECTOR-PLUG (12-PIN)  
  163-6803 [1] PLUG-CONNECTOR (5-PIN)  
  163-6804 [1] PLUG-CONNECTOR (8-PIN)  
  167-3630 [1] CONNECTOR-PLUG  
  7Y-3955 [2] CONNECTOR-RECEPTACLE  
  121-1158 [1] CONNECTOR-RECEPTACLE  
  153-2602 [2] RECEPTACLE-CONNECTOR (1-PIN)  
  163-6800 [1] CONNECTOR-RECEPTACLE  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [7] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9W-0844 [5] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  3S-2093 [28] STRAP-CABLE  
  7Y-3966 [2] TERMINAL AS  
    (EACH INCLUDES)
  7Y-3962 [1] TERMINAL-BULLET (MALE)  
  7Y-3964 [1] TUBE (CONNECTOR TERMINAL)  
  7Y-3967 [2] TERMINAL AS  
    (EACH INCLUDES)
  7Y-3963 [1] TERMINAL-BULLET (FEMALE)  
  7Y-3965 [1] TUBE (RECEPTACLE TERMINAL)  
13. 3S-2093 C [1] STRAP-CABLE  
14. 127-3735 [1] SEAL  
15. 251-0637 C [1] INSULATION  
16. 6V-9672 CM [2] SCREW-MACHINE (M4X0.7X16-MM)  
17. 096-6166 C [2] WASHER-HARD (4.5X9X1-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP44520087
 

167-3547: WIRING GP-CAB

167-3547 WIRING GP-CAB
S/N PAD1-UP
12V-5A POWER SUPPLY
AN ATTACHMENT
i01434497 SEBP4452
1673547 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 205-4285 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
2. 7Y-5226 M [2] NUT (M5X0.8-THD)  
3. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
4. 121-0987 [1] SOCKET-AUXILIARY POWER (12-VOLT, 7-AMPERE)  
  M   METRIC PART
 

#SEBP44520088
 

167-3633: WIRING GP-CAB

167-3633 WIRING GP-CAB
S/N PAD1-UP
PART OF 265-2535 OPERATOR AR
i02408293 SEBP4452
1673633 WIRING GP-CAB Parts scheme 1673633 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 259-4883 C [1] ANTENNA AS  
  259-5082 [1] CABLE AS  
  259-5081 [1] ROD  
2. 096-6166 C [2] WASHER-HARD (4.5X9X1-MM THK)  
3. 251-0637 C [1] INSULATION  
4. 163-6795 [12] STRAP-CABLE  
5. 238-1521 [1] SWITCH AS-ROCKER (AUTOMATIC ENGINE CONTROL)  
6. 238-1522 [1] HARNESS AS-CAB  
  3S-2093 [3] STRAP-CABLE  
7. 127-3735 [1] SEAL  
8. 8T-6693 M [2] SCREW-MACHINE (M5X0.8X16-MM)  
9. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
10. 3S-2093 C [3] STRAP-CABLE  
11. 6V-9669 M [4] SCREW-MACHINE (M3X0.5X8-MM)  
12. 3C-6969 M [4] NUT (M3X0.5-THD)  
13. 167-3612 [1] PANEL AS-CONTROL  
14. 213-0569 [1] HARNESS AS-CAB (ENGINE, PUMP CONTROL)  
  3S-2093 [28] STRAP-CABLE  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
15. 9W-1494 [1] KIT-SERVICE METER (24-VOLT)  
  8L-8413 [15] STRAP-CABLE (WHITE)  
  114-2505 [1] FILM-IDENTIFICATION (SERVICE METER)  
  200-5719 [1] WIRE AS  
  200-5722 [1] WIRE AS  
16. 6V-9672 CM [2] SCREW-MACHINE (M4X0.7X16-MM)  
17. 196-1618 [1] BRACKET  
18. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
19. 101-2846 CE GUARD (10-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP44520089
 

197-4300: WIRING GP-CAB

197-4300 WIRING GP-CAB -CIRCULATING FAN
S/N PAD1-UP
PART OF 178-5458 FAN GP-CIRCULATING
AN ATTACHMENT
i01507001 SEBP4452
1974300 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [15] STRAP-CABLE  
2. 204-1820 [1] HARNESS AS-MOTOR  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  9X-3402 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  7Y-3966 [1] TERMINAL AS  
  7Y-3962 [1] TERMINAL-BULLET (MALE)  
  7Y-3964 [1] TUBE (CONNECTOR TERMINAL)  
  7Y-3967 [1] TERMINAL AS  
  7Y-3963 [1] TERMINAL-BULLET (FEMALE)  
  7Y-3965 [1] TUBE (RECEPTACLE TERMINAL)  
3. 197-4429 [1] HARNESS AS-WIRING (INTERCONNECT)  
  3T-4696 [1] TERMINAL-RING (10-GA TO 12-GA, 7/16-IN SCREW)  
  7Y-3966 [2] TERMINAL AS  
    (EACH INCLUDES)
  7Y-3962 [1] TERMINAL-BULLET (MALE)  
  7Y-3964 [1] TUBE (CONNECTOR TERMINAL)  
  7Y-3967 [1] TERMINAL AS  
  7Y-3963 [1] TERMINAL-BULLET (FEMALE)  
  7Y-3965 [1] TUBE (RECEPTACLE TERMINAL)  
 

Information:

Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Reuse And Salvage Guidelines
Disassembly, Assembly, Testing, and Salvage of Starting Motor for 3046, 3064, and 3066 Engines {1453}
Disassembly, Assembly, Testing, and Salvage of Starting Motor for 3046, 3064, and 3066 Engines {1453}
Disassembly and Assembly
Electric Starting Motor - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Service Magazine
Examine Failed Starting Motors to Understand the Reason for Failure {1453}
2002/10/28

Caterpillar Parts SIS Catalog 311C :

290-9346 SOFTWARE GP-MACHINE
336-3545 RADIO GP-COMMUNICATION
263-9088 RADIO GP-COMMUNICATION
PANEL GP-CIRCUIT BREAKER
213-0607 PANEL GP-CIRCUIT BREAKER
LIGHTING GP-FLOOD
197-4386 LIGHTING GP-FLOOD
LIGHTING GP-FLOOD
193-3498 LIGHTING GP-FLOOD
LIGHTING GP-FLOOD
193-3497 LIGHTING GP-FLOOD
LIGHTING GP-FLOOD
170-6948 LIGHTING GP-FLOOD
STARTING MOTOR GP-ELECTRIC
272-4774 STARTING MOTOR GP-ELECTRIC
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
SWITCH GP-HEAT START
7Y-3918 SWITCH GP-HEAT START
SWITCH GP-MAGNETIC
259-5274 SWITCH GP-MAGNETIC
SWITCH GP-ROTARY
106-0107 SWITCH GP-ROTARY
WIRING GP-CAB
167-3502 WIRING GP-CAB
WIRING GP-CAB
167-3547 WIRING GP-CAB
WIRING GP-CAB
167-3633 WIRING GP-CAB

Truck sale:

 
 
CATERPILLAR 311C 2005
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
 
 
CATERPILLAR 311C 2007
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
 
 
2008 CAT 311C

EURO AUCTIONS
United Kingdom
CATERPILLAR 311 C 2006
 
CATERPILLAR 311 C 2006
- TRACK EXCAVATORS
PON EQUIPMENT DENMARK
Denmark
 
 
2007 CAT 311C

EURO AUCTIONS
United Kingdom
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.