AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

259-5046 WIRING GP-HYDRAULIC CONTROL -RETURN FILTER S/N DHK1-UP; CXY1-UP PART OF 247-7459 FILTER AR-HYDRAULIC AN ATTACHMENT 320D


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 320D EXCAVATOR CXY
 320D & 320D L Excavators CXY00001-UP (MACHINE) POWERED BY 3066 Engine SEBP4454 320D CXY   (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-FINE SWING
259-5052 WIRING GP-FINE SWING
WIRING GP-HAMMER
275-7149 WIRING GP-HAMMER
WIRING GP-HYDRAULIC CONTROL
259-5046 WIRING GP-HYDRAULIC CONTROL
WIRING GP-OVERLOAD WARNING
267-7640 WIRING GP-OVERLOAD WARNING
WIRING GP-PLATFORM
259-5041 WIRING GP-PLATFORM
WIRING GP-QUICK COUPLER
259-5044 WIRING GP-QUICK COUPLER
 

#SEBP44540210
 

259-5046: WIRING GP-HYDRAULIC CONTROL

259-5046 WIRING GP-HYDRAULIC CONTROL -RETURN FILTER
S/N DHK1-UP; CXY1-UP
PART OF 247-7459 FILTER AR-HYDRAULIC
AN ATTACHMENT
i02423737 SEBP4454
2595046 WIRING GP-HYDRAULIC CONTROL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 4I-7889 [1] SPACER (11X25X45-MM THK)  
3. 116-0118 [1] CLIP  
4. 259-5344 [1] HARNESS AS-PUMP  
  9X-3401 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
5. 132-5789 [2] CLIP (LADDER)  
6. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
8. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
  M   METRIC PART
 

#SEBP44540211
 

267-7640: WIRING GP-OVERLOAD WARNING

267-7640 WIRING GP-OVERLOAD WARNING
S/N DHK1-UP
PART OF 247-7498 WARNING AR-OVERLOAD
AN ATTACHMENT
i02423702 SEBP4454
2677640 WIRING GP-OVERLOAD WARNING Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
2. 7K-1181 [4] STRAP-CABLE  
3. 116-0118 [1] CLIP  
4. 204-1611 [1] STRAP (DUAL)  
5. 238-2215 [1] SWITCH AS-ROCKER (OVERLOAD WARNING)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [4] TERMINAL (MALE)  
6. 267-8046 [1] HARNESS AS-SENSOR  
  8T-8737 [3] PLUG-SEAL  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
7. 111-4836 [1] CLIP  
8. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
9. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
11. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
  M   METRIC PART
 

#SEBP44540212
 

259-5041: WIRING GP-PLATFORM

259-5041 WIRING GP-PLATFORM
S/N DHK1-UP; CXY1-UP
PART OF 245-7762 OPERATOR AR
i02418834 SEBP4454
2595041 WIRING GP-PLATFORM Parts scheme 2595041 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 7K-1181 [16] STRAP-CABLE  
4. 111-4836 [4] CLIP  
5. 111-4838 [2] CLIP  
6. 111-4839 [2] STRAP  
7. 116-0118 [14] CLIP  
8. 234-1122 [1] COVER  
9. 238-2349 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
10. 259-5138 [1] HARNESS AS-PLATFORM (CAB)  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [28] STRAP-CABLE  
  153-2620 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  155-2270 [15] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  155-2272 [1] PLUG AS-CONNECTOR (4-PIN)  
  230-4009 [3] PLUG AS-CONNECTOR (12-PIN)  
  230-4011 [3] PLUG AS-CONNECTOR (2-PIN)  
  230-5010 [3] PLUG AS-CONNECTOR (6-PIN)  
  239-7352 [1] PLUG AS-CONNECTOR (6-PIN)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  243-4508 [4] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  243-4510 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
11. 095-0728 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
12. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
13. 3E-5169 [1] GUARD-SWITCH  
14. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
15. 7X-2621 M [7] BOLT (M10X1.5X12-MM)  
16. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
 

#SEBP44540213
 

259-5044: WIRING GP-QUICK COUPLER

259-5044 WIRING GP-QUICK COUPLER
S/N DHK1-UP; CXY1-UP
PART OF 242-6601 CONTROL AR-COUPLER
Type 1
AN ATTACHMENT
i02426081 SEBP4454
2595044 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [8] STRAP-CABLE  
2. 7K-1181 [8] STRAP-CABLE  
3. 267-7590 [1] HARNESS AS-SOLENOID (QUICK COUPLER)  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  8T-8737 [1] PLUG-SEAL  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
 

#SEBP44540214
 

259-5044: WIRING GP-QUICK COUPLER

259-5044 WIRING GP-QUICK COUPLER
S/N DHK1-UP; CXY1-UP
PART OF 242-6601 CONTROL AR-COUPLER
Type 2
AN ATTACHMENT
i02580840 SEBP4454
2595044 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 C [9] STRAP-CABLE  
2. 7K-1181 C [9] STRAP-CABLE  
3. 283-3041 C [1] HARNESS AS-SOLENOID (QUICK COUPLER)  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP44540215
 

267-8002: WIRING GP-QUICK COUPLER

267-8002 WIRING GP-QUICK COUPLER
S/N DHK1-UP; CXY1-UP
PART OF 277-0863 CONTROL AR-COUPLER
AN ATTACHMENT
i02778927 SEBP4454
2678002 WIRING GP-QUICK COUPLER Parts scheme 2678002 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [13] STRAP-CABLE  
2. 7I-2673 [2] STRAP-CABLE  
3. 7K-1181 [15] STRAP-CABLE  
4. 116-0118 [1] CLIP  
5. 283-3015 [1] HARNESS AS-SOLENOID (COUPLER)  
6. 132-5789 [2] CLIP (LADDER)  
7. 4P-7581 [1] CLIP (LADDER)  
8. 5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
9. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
  M   METRIC PART
 

#SEBP44540216
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N DHK1-UP; CXY1-UP
PART OF 240-3877 PUMP AR-FUEL TRANSFER
Type 1
AN ATTACHMENT
i02213964 SEBP4454
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 238-1593 [1] WIRE AS  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44540217
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N DHK1-UP; CXY1-UP
PART OF 240-3877 PUMP AR-FUEL TRANSFER
Type 2
AN ATTACHMENT
i03087780 SEBP4454
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 319-1335 C [1] HARNESS AS-WIRING  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 C [2] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
16. 7K-1181 C [11] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44540218
 

148-4696: DRIVE GP-FINAL

148-4696 DRIVE GP-FINAL -WITH MOTOR
S/N DHK1-1024; CXY1-315
PART OF 227-6165 POWER TRAIN AR
i01857789 SEBP4454
1484696 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-6035 CY [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
2. 107-7028 Y [1] MOTOR & MTG GP-TRAVEL  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP44540219
 

227-6035: DRIVE GP-FINAL

227-6035 DRIVE GP-FINAL -WITHOUT MOTOR
S/N DHK1-UP; CXY1-UP
PART OF 148-4696, 227-6913 DRIVE GP-FINAL
i01845871 SEBP4454
2276035 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
2. 096-1773 B [1] SHIM (0.15-MM THK)  
  096-1774 B [1] SHIM (0.3-MM THK)  
  096-1775 B [1] SHIM (0.4-MM THK)  
  096-1776 B [1] SHIM (0.5-MM THK)  
  096-1777 B [1] SHIM (0.6-MM THK)  
  096-1778 B [1] SHIM (0.7-MM THK)  
  096-1779 B [1] SHIM (0.8-MM THK)  
  096-1780 B [1] SHIM (1-MM THK)  
  096-1781 B [1] SHIM (1.6-MM THK)  
11. 227-6034 M [14] BOLT-FLANGE HEAD (M16X2X60-MM)  
12. 7Y-0223 [3] SHAFT-PLANETARY  
13. 094-1542 [6] BEARING-ROLLER  
14. 7Y-1431 [3] GEAR-PLANETARY (30-TEETH)  
15. 094-1528 [6] WASHER (53X84X1-MM THK)  
16. 095-0891 [6] PIN-SPRING  
17. 6I-6585 [3] GEAR-PLANETARY (44-TEETH)  
18. 094-0616 [3] BEARING AS-ROLLER  
19. 3E-2338 [2] PLUG-PIPE  
20. 7M-8485 [2] SEAL-O-RING  
21. 7Y-1426 [1] COVER  
22. 7Y-0225 [3] SHAFT-PLANETARY  
23. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
24. 094-0580 [1] PLATE (10-MM THK)  
25. 6I-6583 [1] GEAR-SUN (13-TEETH)  
26. 7Y-1430 [1] GEAR-SUN (17-TEETH)  
27. 7Y-1558 [1] SPACER (90X119.6X7.5-MM THK)  
28. 7Y-1432 [1] CARRIER  
29. 7X-2568 M [16] BOLT (M20X2.5X180-MM)  
30. 8T-4123 [16] WASHER (22X35X3.5-MM THK)  
31. 1U-8846 B SEALANT-GASKET  
33. 148-4705 [1] GEAR-RING (104-TEETH)  
34. 7Y-1433 [1] CARRIER  
35. 6D-0692 [1] SEAL-O-RING  
36. 148-4715 [1] GEAR-COUPLING (55-TEETH)  
37. 114-1539 [6] PIN-DOWEL  
38. 191-3235 [1] HOUSING  
39. 168-8451 [2] BALL BEARING  
40. 114-1497 [1] SEAL GP-DUO-CONE  
41. 191-3236 [1] HOUSING  
42. 095-1270 M [2] SETSCREW-SOCKET (M12X1.75X30-MM)  
43. 148-4708 [1] GEAR-RING (79-TEETH)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 320D :

WIRING GP-HAMMER
275-7149 WIRING GP-HAMMER
WIRING GP-FINE SWING
259-5052 WIRING GP-FINE SWING
WIRING GP-FAN
291-7463 WIRING GP-FAN
WIRING GP-FAN
291-7462 WIRING GP-FAN
275-6798 WIRING GP-FAN
WIRING GP-ENGINE
259-5051 WIRING GP-ENGINE
WIRING GP-CONVERTER
350-8250 WIRING GP-CONVERTER
WIRING GP-CONVERTER
251-0485 WIRING GP-CONVERTER
WIRING GP-OVERLOAD WARNING
267-7640 WIRING GP-OVERLOAD WARNING
WIRING GP-PLATFORM
259-5041 WIRING GP-PLATFORM
WIRING GP-QUICK COUPLER
259-5044 WIRING GP-QUICK COUPLER
WIRING GP-QUICK COUPLER
259-5044 WIRING GP-QUICK COUPLER
WIRING GP-QUICK COUPLER
267-8002 WIRING GP-QUICK COUPLER
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
DRIVE GP-FINAL
148-4696 DRIVE GP-FINAL

Truck sale:

Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
THE CHINA ENGINEERS, LTD
Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
PESA
Caterpillar 320D2, Construction
On Request 
Caterpillar 320D2, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 320D2, Construction
139,000 USD 
Caterpillar 320D2, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
CATERPILLAR 320D2 2014
 
CATERPILLAR 320D2 2014
- TRACK EXCAVATORS
PESA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.