266-8448 WIRING GP-CHASSIS S/N LCS1-699 PART OF 240-6532 CHASSIS AR ALSO AN ATTACHMENT 963D TRACK LOADER

266-8448: WIRING GP-CHASSIS

266-8448 WIRING GP-CHASSIS
S/N LCS1-699
PART OF 240-6532 CHASSIS AR
ALSO AN ATTACHMENT

Parts for your 963D TRACK LOADER:

Pos.	Part No	Qty	Parts name
1.	1L-5081	[1]	SPACER (0.41X0.75X0.56-IN THK)
2.	3E-5169	[1]	GUARD-SWITCH
3.	7G-1060	[1]	STRAP AS-GROUND
4.	7K-1181	[78]	STRAP-CABLE
5.	127-5447	[1]	SPACER (10.5X20X12-MM THK)
6.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
7.	158-6634	[1]	SWITCH GP-TOGGLE (ENGINE STOP, RUN)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	9G-3695	[1]	PLUG-SEAL
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	174-7876	[1]	HORN AS (24-VOLT, LOW TONE)
9.	176-9237 M	[4]	BOLT-SPECIAL (M10X1.5-THD)
10.	183-4584 Y	[2]	SENSOR GP-SPEED (TRACK)
11.	193-3973	[2]	STRAP-CABLE
12.	206-2423	[3]	SADDLE-MOUNTING
13.	220-0229	[1]	ALARM AS (BACKUP)
	9X-1813 E		SLEEVE (31-CM)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
14.	261-0420	[1]	SENSOR GP-PRESSURE (HYDROSTATIC)
15.	305-4244	[1]	CLAMP AS
16.	305-8318	[1]	HARNESS AS-CHASSIS
	8T-8827	[1]	BOOT (RED)
	126-1774	[1]	COVER-CONNECTOR
	245-1045	[1]	COVER
	5P-3619 E		HOSE (223-CM)
	110-8769	[1]	WIRE AS (16-GA)
	9X-6772	[2]	STRAP-CABLE
	3S-2093	[1]	STRAP-CABLE
	245-1044	[2]	LOCK-CONNECTOR
	218-4935	[1]	SUPPRESSOR-ARC
	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[19]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[5]	KIT-CONNECTING PLUG (4-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	131-4726	[1]	PLUG AS-CONNECTOR (2-PIN)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	230-4011	[5]	PLUG AS-CONNECTOR (2-PIN)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	230-5008	[2]	PLUG AS-CONNECTOR (4-PIN)
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	237-0227	[1]	PLUG AS-CONNECTOR (3-PIN)
	245-1042	[1]	PLUG AS-CONNECTOR (64-PIN)
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	230-4014	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	230-5009	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
17.	198-4776	[2]	WASHER-HARD (8.8X20X8-MM THK)
18.	204-8000	[2]	MOUNTING-CABLE TIE
19.	207-5370	[1]	CLIP
20.	227-6715 M	[1]	STUD (M10X1.5X30-MM)
21.	3D-5279	[1]	GROMMET
22.	3J-1907	[1]	SEAL-O-RING
23.	4D-7735	[1]	CLIP
24.	4P-7429	[2]	CLIP (LADDER)
25.	4P-7581	[5]	CLIP (LADDER)
26.	4P-8134	[13]	CLIP (LADDER)
27.	4S-1962	[1]	CLIP (LOOP)
28.	5C-7261 M	[2]	NUT (M8X1.25-THD)
29.	5P-4116	[6]	WASHER-HARD (8.8X20.5X2-MM THK)
30.	5P-6629	[1]	GROMMET
31.	5P-9085	[2]	CLIP (LOOP)
32.	6V-1889	[1]	CLIP (LOOP)
33.	7D-7233	[1]	CLIP (LOOP)
34.	8M-2773	[8]	CLIP (LOOP)
35.	8S-0948	[1]	CLIP
36.	8T-0267 M	[4]	BOLT-SOCKET HEAD (M6X1X12-MM)
37.	8T-4121	[32]	WASHER-HARD (11X21X2.5-MM THK)
38.	8T-4133 M	[1]	NUT (M10X1.5-THD)
39.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
40.	8T-4137 M	[14]	BOLT (M10X1.5X20-MM)
41.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
42.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
43.	8T-4189 M	[3]	BOLT (M8X1.25X20-MM)
44.	8T-4191 M	[6]	BOLT (M10X1.5X16-MM)
45.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
46.	8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
47.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
48.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
49.	8T-6466 M	[2]	BOLT (M10X1.5X60-MM)
50.	8T-6869 M	[2]	BOLT (M8X1.25X60-MM)
51.	9M-8406	[1]	CLIP (LOOP)
52.	9W-1991	[1]	SPACER (10.7X17.1X40-MM THK)
53.	9X-7373	[1]	GROMMET
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

266-8448: WIRING GP-CHASSIS

WIRING GP-CHASSIS

266-8448 WIRING GP-CHASSIS
S/N LCS700-1058
PART OF 240-6532 CHASSIS AR
ALSO AN ATTACHMENT

Parts for your 963D TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1L-5081	[1]	SPACER (0.41X0.75X0.56-IN THK)
2.	3E-5169	[1]	GUARD-SWITCH
3.	7G-1060	[1]	STRAP AS-GROUND
4.	7K-1181 C	[84]	STRAP-CABLE
5.	127-5447	[1]	SPACER (10.5X20X12-MM THK)
6.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
7.	158-6634	[1]	SWITCH GP-TOGGLE (ENGINE STOP, RUN)
	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	9G-3695	[1]	PLUG-SEAL
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	174-7876	[1]	HORN AS (24-VOLT, LOW TONE)
9.	176-9237 M	[5]	BOLT-SPECIAL (M10X1.5-THD)
10.	319-6491 Y	[2]	SENSOR GP-SPEED (TRACK)
11.	193-3973	[2]	STRAP-CABLE
12.	206-2423	[3]	SADDLE-MOUNTING
13.	220-0229	[1]	ALARM AS (BACKUP)
	9X-1813 E		SLEEVE (31-CM)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
14.	261-0420	[1]	SENSOR GP-PRESSURE (HYDROSTATIC)
15.	305-4244	[1]	CLAMP AS
16.	315-5847 C	[1]	HARNESS AS-CHASSIS
17.	198-4776	[2]	WASHER-HARD (8.8X20X8-MM THK)
18.	204-8000	[2]	MOUNTING-CABLE TIE
19.	207-5370	[1]	CLIP
21.	3D-5279	[1]	GROMMET
22.	3J-1907	[1]	SEAL-O-RING
23.	4D-7735	[1]	CLIP
24.	4P-7429	[2]	CLIP (LADDER)
25.	4P-7581	[5]	CLIP (LADDER)
26.	4P-8134 C	[15]	CLIP (LADDER)
27.	4S-1962	[1]	CLIP (LOOP)
28.	5C-7261 M	[2]	NUT (M8X1.25-THD)
29.	5P-4116	[6]	WASHER-HARD (8.8X20.5X2-MM THK)
30.	5P-6629	[1]	GROMMET
31.	5P-9085	[2]	CLIP (LOOP)
32.	6V-1889	[1]	CLIP (LOOP)
34.	8M-2773	[8]	CLIP (LOOP)
35.	8S-0948	[1]	CLIP
36.	8T-0267 M	[4]	BOLT-SOCKET HEAD (M6X1X12-MM)
37.	8T-4121	[32]	WASHER-HARD (11X21X2.5-MM THK)
38.	8T-4133 M	[1]	NUT (M10X1.5-THD)
39.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
40.	8T-4137 M	[14]	BOLT (M10X1.5X20-MM)
41.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
42.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
43.	8T-4189 M	[3]	BOLT (M8X1.25X20-MM)
44.	8T-4191 M	[6]	BOLT (M10X1.5X16-MM)
45.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
46.	8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
47.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
48.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
49.	8T-6466 M	[2]	BOLT (M10X1.5X60-MM)
50.	8T-6869 M	[2]	BOLT (M8X1.25X60-MM)
51.	9M-8406	[1]	CLIP (LOOP)
52.	9W-1991	[1]	SPACER (10.7X17.1X40-MM THK)
53.	9X-7373	[1]	GROMMET
54.	315-5852 C	[1]	HARNESS AS-SWITCH (LIFT KICKOUT)
55.	315-5849 C	[1]	HARNESS AS-SWITCH (TILT KICKOUT)
56.	4P-7428 C	[1]	CLIP (LADDER)
57.	8T-2525	[1]	GROMMET
58.	5P-7469	[1]	CLIP (TAB)
59.	5P-7468	[1]	CLIP (SLOT)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

266-8448: WIRING GP-CHASSIS

WIRING GP-CHASSIS

266-8448 WIRING GP-CHASSIS
S/N LCS1059-1399
PART OF 240-6532 CHASSIS AR
ALSO AN ATTACHMENT

Parts for your 963D TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181 C	[85]	STRAP-CABLE
4.	127-5447	[1]	SPACER (10.5X20X12-MM THK)
5.	131-0359	[1]	PLATE-IDENTIFICATION (ENGINE STOP, RUN)
6.	158-6634	[1]	SWITCH GP-TOGGLE (ENGINE STOP, RUN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	9G-3695	[1]	PLUG-SEAL
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	174-7876	[1]	HORN AS (24-VOLT, LOW TONE)
8.	176-9237 M	[5]	BOLT-SPECIAL (M10X1.5-THD)
9.	193-3973	[2]	STRAP-CABLE
10.	206-2423	[3]	SADDLE-MOUNTING
11.	220-0229	[1]	ALARM AS (BACKUP)
	9X-1813 E		SLEEVE (29-CM)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
12.	223-1395 C	[1]	BRACKET AS
	8T-5413 M	[1]	STUD-WELD (M10X1.5X25-MM)
13.	261-0420	[1]	SENSOR GP-PRESSURE (HYDROSTATIC)
14.	305-4244	[1]	CLAMP AS
15.	315-5847	[1]	HARNESS AS-CHASSIS
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[1]	STRAP-CABLE
	6T-5598	[1]	TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW)
	3L-6513	[1]	TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW)
	8T-8737	[78]	PLUG-SEAL
	8T-8827	[1]	BOOT (RED)
	9X-6772	[2]	STRAP-CABLE
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(70-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	9X-3402	[162]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	126-1774	[1]	COVER-CONNECTOR
	2L-8069	[2]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	2L-8079	[4]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	131-4726	[1]	PLUG AS-CONNECTOR (2-PIN)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	144-1636	[9]	PIN-CONNECTOR (14-GA TO 18-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[21]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	174-1712 E		INSULATION (30-CM)
	218-4935	[1]	SUPPRESSOR-ARC
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[5]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	237-0227	[1]	PLUG AS-CONNECTOR (3-PIN)
	230-4013	[2]	PLUG AS-CONNECTOR (3-PIN)
			(EACH PLUG AS INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
	230-4014	[2]	RECEPTACLE AS-CONNECTOR (3-PIN)
	230-5008	[2]	PLUG AS-CONNECTOR (4-PIN)
			(EACH INCLUDES)
	264-7031	[1]	SEAL-CONNECTOR
	230-5009	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	264-7033	[1]	SEAL-CONNECTOR
	245-1042	[1]	PLUG AS-CONNECTOR (64-PIN)
	267-7207 M	[1]	BOLT-SPECIAL (M6X1-THD)
	267-7208	[1]	RING-RETAINING
	274-4990	[1]	SEAL
	245-1044	[2]	LOCK-CONNECTOR
	245-1045	[1]	COVER
	245-1047	[23]	SOCKET-CONNECTOR
16.	315-5849	[1]	HARNESS AS-SWITCH (TILT KICKOUT)
	8T-8737	[1]	PLUG-SEAL
	122-6869 G		HOSE-HYDRAULIC (50-IN)
	9X-3402	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
17.	319-6491 Y	[2]	SENSOR GP-SPEED (TRACK)
18.	335-8246 C	[1]	HARNESS AS-SWITCH (LIFT KICKOUT)
	8T-8737	[1]	PLUG-SEAL
	122-6869 G		HOSE-HYDRAULIC (59-IN)
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	144-1636	[3]	PIN-CONNECTOR (14-GA TO 18-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4014	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
19.	198-4776	[2]	WASHER-HARD (8.8X20X8-MM THK)
20.	204-8000	[2]	MOUNTING-CABLE TIE
21.	207-5370	[1]	CLIP
22.	3D-5279	[1]	GROMMET
23.	3J-1907	[1]	SEAL-O-RING
24.	3V-2431 C	[1]	WASHER (10.2X16X2-MM THK)
25.	4D-7735 C	[2]	CLIP
26.	4P-7428	[1]	CLIP (LADDER)
27.	4P-7429	[2]	CLIP (LADDER)
28.	4P-7581	[5]	CLIP (LADDER)
29.	4P-8134	[15]	CLIP (LADDER)
30.	5C-7261 M	[2]	NUT (M8X1.25-THD)
31.	5P-4116	[6]	WASHER-HARD (8.8X20.5X2-MM THK)
32.	5P-6629	[1]	GROMMET
33.	5P-7468 C	[2]	CLIP (SLOT)
34.	5P-7469 C	[2]	CLIP (TAB)
35.	5P-8444 C	[1]	GROMMET (37-MM ID)
36.	5P-9085	[2]	CLIP (LOOP)
37.	6V-1889	[1]	CLIP (LOOP)
38.	7X-7729 C	[1]	WASHER (11X25X3-MM THK)
39.	8M-2773	[8]	CLIP (LOOP)
40.	8S-0948	[1]	CLIP
41.	8T-0267 M	[4]	BOLT-SOCKET HEAD (M6X1X12-MM)
42.	8T-1159 CM	[1]	BOLT-SOCKET HEAD (M10X1.5X25-MM)
43.	8T-2525	[1]	GROMMET
44.	8T-4121 C	[33]	WASHER-HARD (11X21X2.5-MM THK)
45.	8T-4133 CM	[2]	NUT (M10X1.5-THD)
46.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
47.	8T-4137 CM	[15]	BOLT (M10X1.5X20-MM)
48.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
49.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
50.	8T-4189 M	[3]	BOLT (M8X1.25X20-MM)
51.	8T-4191 M	[6]	BOLT (M10X1.5X16-MM)
52.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
53.	8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
54.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
55.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
56.	8T-6466 M	[2]	BOLT (M10X1.5X60-MM)
57.	8T-6869 M	[2]	BOLT (M8X1.25X60-MM)
58.	9M-8406	[1]	CLIP (LOOP)
59.	9W-1991	[1]	SPACER (10.7X17.1X40-MM THK)
60.	9X-7373	[1]	GROMMET
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

266-8448: WIRING GP-CHASSIS

WIRING GP-CHASSIS

266-8448 WIRING GP-CHASSIS
S/N LCS1400-1847
PART OF 240-6532 CHASSIS AR
ALSO AN ATTACHMENT

Parts for your 963D TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181	[84]	STRAP-CABLE
4.	127-5447	[1]	SPACER (10.5X20X12-MM THK)
5.	174-7876	[1]	HORN AS (24-VOLT, LOW TONE)
6.	176-9237 M	[5]	BOLT-SPECIAL (M10X1.5-THD)
7.	193-3973	[2]	STRAP-CABLE
8.	206-2423	[3]	SADDLE-MOUNTING
9.	220-0229	[1]	ALARM AS (BACKUP)
	9X-1813 E		SLEEVE (29-CM)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
10.	223-1395	[1]	BRACKET AS
	8T-5413 M	[1]	STUD-WELD (M10X1.5X25-MM)
11.	261-0420	[1]	SENSOR GP-PRESSURE (HYDROSTATIC)
12.	305-4244	[1]	CLAMP AS
13.	315-5847	[1]	HARNESS AS-CHASSIS
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE KIT & WEDGE)
	3S-2093	[1]	STRAP-CABLE
	6T-5598	[1]	TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW)
	8T-8737	[78]	PLUG-SEAL
	8T-8827	[1]	BOOT (RED)
	110-8769	[1]	WIRE AS (16-GA)
	9X-6772	[2]	STRAP-CABLE
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(70-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	9X-3402	[162]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	126-1774	[1]	COVER-CONNECTOR
	2L-8069	[2]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	131-4726	[1]	PLUG AS-CONNECTOR (2-PIN)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	9X-3401	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[9]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2258	[1]	WEDGE-PLUG LOCK (12-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[21]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	174-1712 E		INSULATION (30-CM)
	218-4935	[1]	SUPPRESSOR-ARC
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[5]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	237-0227	[1]	PLUG AS-CONNECTOR (3-PIN)
	230-4013	[2]	PLUG AS-CONNECTOR (3-PIN)
			(EACH PLUG AS INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
	230-4014	[2]	RECEPTACLE AS-CONNECTOR (3-PIN)
	230-5008	[2]	PLUG AS-CONNECTOR (4-PIN)
			(EACH INCLUDES)
	264-7031	[1]	SEAL-CONNECTOR
	230-5009	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	264-7033	[1]	SEAL-CONNECTOR
	245-1042	[1]	PLUG AS-CONNECTOR (64-PIN)
	267-7207 M	[1]	BOLT-SPECIAL (M6X1-THD)
	274-4990	[1]	SEAL
	245-1044	[2]	LOCK-CONNECTOR
	245-1045	[1]	COVER
	267-9572	[23]	SOCKET-CONNECTION (18-GA)
14.	315-5849	[1]	HARNESS AS-SWITCH (TILT KICKOUT)
	8T-8737	[1]	PLUG-SEAL
	122-6869 G		HOSE-HYDRAULIC (50-IN)
	9X-3402	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
15.	319-6491 JY	[2]	SENSOR GP-SPEED (TRACK)
16.	335-8246	[1]	HARNESS AS-SWITCH (LIFT KICKOUT)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[3]	PIN-CONNECTOR (14-GA TO 16-GA)
	8T-8737	[1]	PLUG-SEAL
	122-6869 G		HOSE-HYDRAULIC (59-IN)
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4014	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
17.	356-7276 C	[1]	HARNESS AS-WIRING (CRANK WITHOUT INJECT)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	3E-3377	[2]	WEDGE-RECEPTACLE LOCK (4-PIN)
	8T-8737	[8]	PLUG-SEAL
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
18.	117-1385 J	[2]	SEAL-O-RING
19.	198-4776	[2]	WASHER-HARD (8.8X20X8-MM THK)
20.	204-8000	[2]	MOUNTING-CABLE TIE
21.	207-5370	[1]	CLIP
22.	3D-5279	[1]	GROMMET
23.	3J-1907	[1]	SEAL-O-RING
24.	3V-2431	[1]	WASHER (10.2X16X2-MM THK)
25.	4D-7735	[2]	CLIP
26.	4P-7428	[1]	CLIP (LADDER)
27.	4P-7429	[2]	CLIP (LADDER)
28.	4P-7581	[5]	CLIP (LADDER)
29.	4P-8134 C	[13]	CLIP (LADDER)
30.	5C-7261 M	[2]	NUT (M8X1.25-THD)
31.	5P-4116	[6]	WASHER-HARD (8.8X20.5X2-MM THK)
32.	5P-6629	[1]	GROMMET
33.	5P-7468	[2]	CLIP (SLOT)
34.	5P-7469	[2]	CLIP (TAB)
35.	5P-8444	[1]	GROMMET (37-MM ID)
36.	5P-9085	[2]	CLIP (LOOP)
37.	6V-1889	[1]	CLIP (LOOP)
38.	7X-7729	[1]	WASHER (11X25X3-MM THK)
39.	8M-2773	[8]	CLIP (LOOP)
40.	8S-0948	[1]	CLIP
41.	8T-0267 M	[4]	BOLT-SOCKET HEAD (M6X1X12-MM)
42.	8T-1159 M	[1]	BOLT-SOCKET HEAD (M10X1.5X25-MM)
43.	8T-2525	[1]	GROMMET
44.	8T-4121 C	[32]	WASHER-HARD (11X21X2.5-MM THK)
45.	8T-4133 M	[2]	NUT (M10X1.5-THD)
46.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
47.	8T-4137 M	[15]	BOLT (M10X1.5X20-MM)
48.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
49.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
50.	8T-4189 M	[3]	BOLT (M8X1.25X20-MM)
51.	8T-4191 M	[6]	BOLT (M10X1.5X16-MM)
52.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
53.	8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
54.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
55.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
56.	8T-6466 CM	[1]	BOLT (M10X1.5X60-MM)
57.	8T-6869 M	[2]	BOLT (M8X1.25X60-MM)
58.	9M-8406	[1]	CLIP (LOOP)
59.	9W-1991	[1]	SPACER (10.7X17.1X40-MM THK)
60.	9X-7373	[1]	GROMMET
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH
	J		SEAL MARKED J IS REQUIRED WITH SENSOR GP MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

266-8448: WIRING GP-CHASSIS

WIRING GP-CHASSIS

266-8448 WIRING GP-CHASSIS
S/N LCS1848-1883
PART OF 240-6532 CHASSIS AR
ALSO AN ATTACHMENT

Parts for your 963D TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181 C	[86]	STRAP-CABLE
4.	127-5447	[1]	SPACER (10.5X20X12-MM THK)
5.	174-7876	[1]	HORN AS (24-VOLT, LOW TONE)
6.	176-9237 M	[5]	BOLT-SPECIAL (M10X1.5-THD)
7.	193-3973	[2]	STRAP-CABLE
8.	206-2423	[3]	SADDLE-MOUNTING
9.	220-0229	[1]	ALARM AS (BACKUP)
	9X-1813 E		SLEEVE (29-CM)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
11.	261-0420	[1]	SENSOR GP-PRESSURE (HYDROSTATIC)
12.	305-4244	[1]	CLAMP AS
13.	367-3795 C	[1]	HARNESS AS-CHASSIS
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[1]	STRAP-CABLE
	6T-5598	[1]	TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW)
	3L-6513	[1]	TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW)
	8C-3056 E		CABLE (2-GA, RED)(641-CM)
	8T-8737	[78]	PLUG-SEAL
	8T-8827	[1]	BOOT (RED)
	110-8769	[1]	WIRE AS (16-GA)
	9X-6772	[2]	STRAP-CABLE
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(75-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)
	9X-3402	[162]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[162]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1774	[1]	COVER-CONNECTOR
	2L-8069	[3]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	2L-8079	[3]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	131-4726	[1]	PLUG AS-CONNECTOR (2-PIN)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	9X-3401	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[9]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[21]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	174-1712 E		INSULATION (30-CM)
	218-4935	[1]	SUPPRESSOR-ARC
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[5]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029		SEAL-CONNECTOR
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	230-4013	[2]	PLUG AS-CONNECTOR (3-PIN)
			(EACH INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
	230-4014	[2]	RECEPTACLE AS-CONNECTOR (3-PIN)
	230-5008	[2]	PLUG AS-CONNECTOR (4-PIN)
			(EACH INCLUDES)
	264-7031	[1]	SEAL-CONNECTOR
	230-5009	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	264-7033	[1]	SEAL-CONNECTOR
	237-0227	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030		SEAL-CONNECTOR
	245-1042	[1]	PLUG AS-CONNECTOR (64-PIN)
	267-7207 M	[1]	BOLT-SPECIAL (M6X1-THD)
	245-1044	[2]	LOCK-CONNECTOR
	245-1045	[1]	COVER
	267-9572	[23]	SOCKET-CONNECTION (18-GA)
14.	315-5849	[1]	HARNESS AS-SWITCH (TILT KICKOUT)
	8T-8737	[1]	PLUG-SEAL
	122-6869 G		HOSE-HYDRAULIC (50-IN)
	9X-3402	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
15.	319-6491 JY	[2]	SENSOR GP-SPEED (TRACK)
17.	356-7276	[1]	HARNESS AS-WIRING (CRANK WITHOUT INJECT)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[8]	PLUG-SEAL
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
18.	117-1385 J	[2]	SEAL-O-RING
19.	198-4776	[2]	WASHER-HARD (8.8X20X8-MM THK)
20.	204-8000	[2]	MOUNTING-CABLE TIE
21.	207-5370	[1]	CLIP
22.	3D-5279	[1]	GROMMET
23.	3J-1907	[1]	SEAL-O-RING
25.	4D-7735 C	[1]	CLIP
26.	4P-7428	[1]	CLIP (LADDER)
27.	4P-7429	[2]	CLIP (LADDER)
28.	4P-7581	[5]	CLIP (LADDER)
29.	4P-8134	[13]	CLIP (LADDER)
30.	5C-7261 M	[2]	NUT (M8X1.25-THD)
31.	5P-4116	[6]	WASHER-HARD (8.8X20.5X2-MM THK)
33.	5P-7468	[2]	CLIP (SLOT)
34.	5P-7469	[2]	CLIP (TAB)
35.	5P-8444	[1]	GROMMET (37-MM ID)
36.	5P-9085	[2]	CLIP (LOOP)
37.	6V-1889	[1]	CLIP (LOOP)
38.	7X-7729	[1]	WASHER (11X25X3-MM THK)
39.	8M-2773 C	[5]	CLIP (LOOP)
40.	8S-0948	[1]	CLIP
41.	8T-0267 M	[4]	BOLT-SOCKET HEAD (M6X1X12-MM)
43.	8T-2525	[1]	GROMMET
44.	8T-4121 C	[28]	WASHER-HARD (11X21X2.5-MM THK)
45.	8T-4133 CM	[1]	NUT (M10X1.5-THD)
46.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
47.	8T-4137 CM	[12]	BOLT (M10X1.5X20-MM)
48.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
49.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
50.	8T-4189 M	[3]	BOLT (M8X1.25X20-MM)
51.	8T-4191 M	[6]	BOLT (M10X1.5X16-MM)
52.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
53.	8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
54.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
55.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
56.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
57.	8T-6869 M	[2]	BOLT (M8X1.25X60-MM)
58.	9M-8406	[1]	CLIP (LOOP)
59.	9W-1991	[1]	SPACER (10.7X17.1X40-MM THK)
60.	9X-7373	[1]	GROMMET
61.	361-9877 CY	[1]	SENSOR & MTG GP-LIFT POSITION
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH
	J		SEAL MARKED J IS REQUIRED WITH SENSOR GP MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

266-8448: WIRING GP-CHASSIS

WIRING GP-CHASSIS

266-8448 WIRING GP-CHASSIS
S/N LCS1884-UP
PART OF 240-6532 CHASSIS AR
ALSO AN ATTACHMENT

Parts for your 963D TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181	[86]	STRAP-CABLE
4.	127-5447	[1]	SPACER (10.5X20X12-MM THK)
5.	163-1201	[1]	HORN AS (24-VOLT, LOW TONE)
6.	176-9237 M	[5]	BOLT-SPECIAL (M10X1.5-THD)
7.	204-2281	[2]	STRAP-CABLE
8.	206-2423	[3]	SADDLE-MOUNTING
9.	220-0229	[1]	ALARM AS (BACKUP)
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.4-M EACH)
	9X-1813 E		SLEEVE (29-CM)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
11.	335-5321 C	[1]	SENSOR GP-PRESSURE (HYDROSTATIC)
12.	305-4244	[1]	CLAMP AS
13.	430-5173 C	[1]	HARNESS AS-CHASSIS
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[1]	STRAP-CABLE
	6T-5598	[1]	TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW)
	3L-6513	[1]	TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW)
	8T-8737	[78]	PLUG-SEAL
	8T-8827	[1]	BOOT (RED)
	110-8769	[1]	WIRE AS (16-GA)
	7K-1181	[2]	STRAP-CABLE
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(75-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)
	9X-3402	[162]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[162]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1774	[1]	COVER-CONNECTOR
	2L-8069	[3]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	2L-8079	[3]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	131-4726	[1]	PLUG AS-CONNECTOR (2-PIN)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	9X-3401	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[9]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[21]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	155-2258	[1]	WEDGE-PLUG LOCK (12-PIN)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	174-1712 E		INSULATION (30-CM)
	218-4935	[1]	SUPPRESSOR-ARC
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[5]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	230-4013	[2]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	230-4014	[2]	RECEPTACLE AS-CONNECTOR (3-PIN)
	230-5008	[4]	PLUG AS-CONNECTOR (4-PIN)
			(EACH INCLUDES)
	264-7031	[1]	SEAL-CONNECTOR
	230-5009	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	264-7033	[1]	SEAL-CONNECTOR
	237-0227	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	245-1042	[1]	PLUG AS-CONNECTOR (64-PIN)
	267-7207 M	[1]	BOLT-SPECIAL (M6X1-THD)
	245-1044	[2]	LOCK-CONNECTOR
	245-1045	[1]	COVER
	267-9572	[23]	SOCKET-CONNECTION (18-GA)
14.	315-5849	[1]	HARNESS AS-SWITCH (TILT KICKOUT)
	8T-8737	[1]	PLUG-SEAL
	122-6869 G		HOSE-HYDRAULIC (50-IN)
	9X-3402	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
15.	358-2398 CJY	[2]	SENSOR GP-SPEED (TRACK)
17.	356-7276	[1]	HARNESS AS-WIRING (CRANK WITHOUT INJECT)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[8]	PLUG-SEAL
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
18.	351-1904 CJ	[2]	SEAL-O-RING
19.	198-4776	[2]	WASHER-HARD (8.8X20X8-MM THK)
20.	204-8000	[2]	MOUNTING-CABLE TIE
21.	207-5370	[1]	CLIP
22.	6S-1066	[1]	GROMMET (41.28-MM OD)
23.	3J-1907	[1]	SEAL-O-RING
25.	4D-7735	[1]	CLIP
26.	4P-7428	[1]	CLIP (LADDER)
27.	4P-7429	[2]	CLIP (LADDER)
28.	4P-7581	[5]	CLIP (LADDER)
29.	4P-8134	[13]	CLIP (LADDER)
30.	5C-7261 M	[2]	NUT (M8X1.25-THD)
31.	5P-4116	[6]	WASHER-HARD (8.8X20.5X2-MM THK)
33.	5P-7468	[2]	CLIP (SLOT)
34.	5P-7469	[2]	CLIP (TAB)
35.	5P-8444	[1]	GROMMET (37-MM ID)
36.	5P-9085	[2]	CLIP (LOOP)
37.	6V-1889	[1]	CLIP (LOOP)
38.	7X-7729	[1]	WASHER (11X25X3-MM THK)
39.	8M-2773	[5]	CLIP (LOOP)
40.	8S-0948	[1]	CLIP
41.	8T-0267 M	[4]	BOLT-SOCKET HEAD (M6X1X12-MM)
43.	8T-2525	[1]	GROMMET
44.	8T-4121	[28]	WASHER-HARD (11X21X2.5-MM THK)
45.	8T-4133 M	[1]	NUT (M10X1.5-THD)
46.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
47.	8T-4137 M	[12]	BOLT (M10X1.5X20-MM)
48.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
49.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
50.	8T-4189 M	[3]	BOLT (M8X1.25X20-MM)
51.	8T-4191 M	[6]	BOLT (M10X1.5X16-MM)
52.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
53.	8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
54.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
55.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
56.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
57.	8T-6869 M	[2]	BOLT (M8X1.25X60-MM)
58.	9M-8406	[1]	CLIP (LOOP)
59.	9W-1991	[1]	SPACER (10.7X17.1X40-MM THK)
60.	9X-7373	[1]	GROMMET
61.	361-9877 Y	[1]	SENSOR & MTG GP-LIFT POSITION
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH
	J		SEAL MARKED J IS REQUIRED WITH SENSOR GP MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

363-1287: WIRING GP-CHASSIS

WIRING GP-CHASSIS

363-1287 WIRING GP-CHASSIS -COUPLER
S/N LCS1-UP
PART OF 363-0008, 363-1290 WIRING GP-HYDRAULIC
AN ATTACHMENT

Parts for your 963D TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[22]	STRAP-CABLE
2.	256-1028	[1]	BRACKET AS
3.	363-1278	[1]	HARNESS AS-SOLENOID
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECPTACLE AS & WEDGE)
	8T-8737	[11]	PLUG-SEAL
	9X-3402	[17]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS, WEDGE & INTERFACE SEAL)
	237-0227	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
4.	156-6175	[3]	CLIP (LADDER)
5.	4P-7581	[1]	CLIP (LADDER)
6.	4P-8134	[1]	CLIP (LADDER)
7.	5P-9299	[1]	CLIP (LOOP)
8.	8J-1256	[1]	CLIP (LOOP)
9.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
	M		METRIC PART

280-9449: WIRING GP-CONTROL

WIRING GP-CONTROL

280-9449 WIRING GP-CONTROL
S/N LCS1-1791
PART OF 268-9350 CONTROL GP-DIRECTION & SPEED
AN ATTACHMENT

Parts for your 963D TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[6]	STRAP-CABLE
2.	9G-7101	[1]	SPACER (10.5X20X30-MM THK)
3.	116-0118	[1]	CLIP
4.	162-6556 M	[1]	LOCKNUT (M6X1-THD)
5.	183-4274	[1]	BRACKET
6.	189-0135	[1]	SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	247-0741 Y	[1]	BASE AS-JOYSTICK (HYDROSTATIC DRIVE)
8.	263-1491	[1]	SWITCH AS-ROCKER (WORK MODE)
9.	283-6947	[1]	SWITCH AS-PUSH BUTTON (HORN)
	6F-0253	[1]	LOCKWASHER
	172-3511	[1]	NUT (5/8-24-THD)
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
10.	325-7500	[1]	HARNESS AS-CONTROL
11.	112-6646 M	[4]	LOCKNUT (M6X1-THD)
12.	198-4775	[1]	WASHER-HARD (6.6X15X6-MM THK)
13.	1P-7326	[2]	WASHER (4.32X9.52X1.52-MM THK)
14.	4D-9517	[1]	CLIP
15.	6D-3479	[2]	CLIP (LOOP)
16.	6V-9505 M	[2]	SCREW-MACHINE (M3X0.5X25-MM)
17.	9X-2026	[1]	WASHER (6.5X17X1-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

280-9449: WIRING GP-CONTROL

WIRING GP-CONTROL

280-9449 WIRING GP-CONTROL
S/N LCS1792-UP
PART OF 268-9350 CONTROL GP-DIRECTION & SPEED
Type 1
AN ATTACHMENT

Parts for your 963D TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[6]	STRAP-CABLE
2.	9G-7101	[1]	SPACER (10.5X20X30-MM THK)
3.	116-0118	[1]	CLIP
4.	162-6556 M	[1]	LOCKNUT (M6X1-THD)
5.	183-4274	[1]	BRACKET
6.	189-0135	[1]	SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	247-0741 Y	[1]	BASE AS-JOYSTICK (HYDROSTATIC DRIVE)
8.	263-1491 B	[1]	SWITCH AS-ROCKER (TRAVEL SPEED CONTROL)
			(ONLY USE ON TIER3 MACHINES)
9.	283-6947	[1]	SWITCH AS-PUSH BUTTON (HORN)
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	6F-0253	[1]	LOCKWASHER
	172-3511	[1]	NUT (5/8-24-THD)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE(S) & INTERFACE SEAL)
10.	375-8909 C	[1]	HARNESS AS-CONTROL
	9X-3401	[14]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[14]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[20]	PLUG-SEAL
	8Y-8081 E		TUBE-CONVOLUTED (43-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9X-3402	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[12]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	245-7434	[1]	KIT-CONNECTING PLUG (10-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	185-1860	[7]	SEAL-WIRE
	202-5397	[3]	PLUG
	204-1297	[7]	TERMINAL AS-BLADE (18-GA TO 20-GA)
			(EACH INCLUDES)
	235-4123	[1]	TERMINAL (18-GA TO 20-GA)
	210-8958 E		TUBE-HEAT SHRINK (24-MM DIA)(10-CM)
	230-4010	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	455-0707	[1]	SEAL-CONNECTOR
	230-5011	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	455-0708	[1]	SEAL-CONNECTOR
	231-2300	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	329-3734 B		TAPE-ELECTRICAL
11.	112-6646 M	[4]	LOCKNUT (M6X1-THD)
12.	198-4775	[1]	WASHER-HARD (6.6X15X6-MM THK)
13.	1P-7326	[2]	WASHER (4.32X9.52X1.52-MM THK)
14.	8M-2770 C	[1]	CLIP (LOOP)
15.	1S-0994 C	[2]	CLIP (LOOP)
16.	6V-9505 M	[2]	SCREW-MACHINE (M3X0.5X25-MM)
17.	114-6658	[1]	WASHER (6.5X17X1-MM THK)
18.	8S-0948 C	[1]	CLIP
19.	397-2682 B	[1]	SWITCH AS-ROCKER (TRAVEL SPEED CONTROL)
			(ONLY USE ON TIER4 FINAL MACHINES)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

280-9449: WIRING GP-CONTROL

WIRING GP-CONTROL

280-9449 WIRING GP-CONTROL
S/N LCS1792-UP
PART OF 268-9350 CONTROL GP-DIRECTION & SPEED
Type 2
AN ATTACHMENT

Parts for your 963D TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[6]	STRAP-CABLE
2.	9G-7101	[1]	SPACER (10.5X20X30-MM THK)
3.	116-0118	[1]	CLIP
4.	162-6556 M	[1]	LOCKNUT (M6X1-THD)
5.	183-4274	[1]	BRACKET
6.	189-0135	[1]	SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	455-1853 CY	[1]	BASE AS-JOYSTICK (HYDROSTATIC DRIVE)
9.	283-6947	[1]	SWITCH AS-PUSH BUTTON (HORN)
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	6F-0253	[1]	LOCKWASHER
	172-3511	[1]	NUT (5/8-24-THD)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE(S) & INTERFACE SEAL)
10.	375-8909	[1]	HARNESS AS-CONTROL
	9X-3401	[14]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[14]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[20]	PLUG-SEAL
	8Y-8081 E		TUBE-CONVOLUTED (43-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9X-3402	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[12]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE(S) & INTERFACE SEAL)
	245-7434	[1]	KIT-CONNECTING PLUG (10-PIN)
			(INCLUDES PLUG CONNECTOR, WIRE ASSEMBLIES & PLUGS)
	185-1860	[7]	SEAL-WIRE
	202-5397	[3]	PLUG
	204-1297	[7]	TERMINAL AS-BLADE (18-GA TO 20-GA)
			(EACH INCLUDES)
	235-4123	[1]	TERMINAL (18-GA TO 20-GA)
	210-8958 E		TUBE-HEAT SHRINK (24-MM DIA)(10-CM)
	230-4010	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	455-0707	[1]	SEAL-CONNECTOR
	230-5011	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	455-0708	[1]	SEAL-CONNECTOR
	231-2300	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	329-3734 B		TAPE-ELECTRICAL
11.	112-6646 M	[4]	LOCKNUT (M6X1-THD)
12.	198-4775	[1]	WASHER-HARD (6.6X15X6-MM THK)
13.	1P-7326	[2]	WASHER (4.32X9.52X1.52-MM THK)
14.	8M-2770	[1]	CLIP (LOOP)
15.	1S-0994	[2]	CLIP (LOOP)
16.	6V-9505 M	[2]	SCREW-MACHINE (M3X0.5X25-MM)
17.	114-6658	[1]	WASHER (6.5X17X1-MM THK)
18.	8S-0948	[1]	CLIP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Special Instruction

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Service Magazine

New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29

Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2007/07/23

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Caterpillar Parts SIS Catalog 963D :

Truck sale:

Caterpillar 963D
- track loaders
FABICK CAT

257,964

Caterpillar 963D, track loaders, Construction
- track loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC

105,925

Caterpillar 963D, track loaders, Construction
- track loaders
BERGERAT MONNOYEUR S.A.S.

Caterpillar 963D, track loaders, Construction
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI

269,500

Caterpillar 963D, track loaders, Construction
- track loaders
ALTORFER INDUSTRIES