HYDRAULIC SYSTEM
VALVE GP-SOLENOIDIMPLEMENTS
BULLDOZER GPC-FRAME GP
BULLDOZER GP
OPERATOR STATION
SEAT GPHYDRAULIC SYSTEM
VALVE GP-SOLENOID
#SEBP44580580
235-4605: VALVE GP-SOLENOID
235-4605 VALVE GP-SOLENOID
S/N RFC1-UP; MTJ1-UP; DLM1-UP
PART OF 239-5317 VALVE & MTG GP-BULLDOZER
FIELD REPLACEMENT FOR @@@@@206-4795@@@@@
AN ATTACHMENT
S/N RFC1-UP; MTJ1-UP; DLM1-UP
PART OF 239-5317 VALVE & MTG GP-BULLDOZER
FIELD REPLACEMENT FOR @@@@@206-4795@@@@@
AN ATTACHMENT
For full view, you need register
#SEBP44580581
285-5730: VALVE GP-SOLENOID
285-5730 VALVE GP-SOLENOID
S/N RFC142-UP; MTJ153-UP; DLM163-UP
PART OF 226-9985 LINES GP-PILOT
S/N RFC142-UP; MTJ153-UP; DLM163-UP
PART OF 226-9985 LINES GP-PILOT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP44580582
341-9214: VALVE GP-SOLENOID
341-9214 VALVE GP-SOLENOID
S/N RFC1-UP; MTJ1-UP; DLM1-UP
PART OF 239-5317 VALVE & MTG GP-BULLDOZER
AN ATTACHMENT
S/N RFC1-UP; MTJ1-UP; DLM1-UP
PART OF 239-5317 VALVE & MTG GP-BULLDOZER
AN ATTACHMENT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 191-9247 | [1] | WASHER (19.15X31.65X2.36-MM THK) | |
| 2. | 198-2914 | [1] | NUT (3/4-32-THD) | |
| 3. | 235-4606 | [1] | CARTRIDGE AS-VALVE | |
| 6V-4589 | [1] | SEAL-O-RING | ||
| 8L-2746 | [1] | SEAL-O-RING | ||
| 033-6043 | [1] | SEAL-O-RING | ||
| 4. | 312-8629 | [1] | COIL AS (24-VOLT) | |
| 5. | 316-1438 | [1] | CARTRIDGE AS | |
| 214-7568 | [2] | SEAL-O-RING |
#SEBP44580583
222-8010: BULLDOZER AR-PWR ANGLE & TILT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 214-2292 Y | [1] | BLADE GP-ANGLING | |
| 2. | 222-8006 Y | [1] | LINES GP-ANGLE & TILT | |
| 3. | 222-8007 Y | [1] | C-FRAME GP | |
| 4. | 225-3740 Y | [1] | LINK GP-PITCH | |
| 5. | 227-4036 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 6. | 227-4037 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 7. | 227-8893 Y | [1] | CYLINDER GP-TILT | |
| 8. | 238-9559 Y | [1] | MOUNTING GP-CYLINDER | |
| 9. | 261-0077 Y | [2] | CYLINDER GP-ANGLING | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (UPPER RH CORNER OF BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44580584
222-8015: BULLDOZER AR-PWR ANGLE & TILT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 222-8006 Y | [1] | LINES GP-ANGLE & TILT | |
| 2. | 222-8007 Y | [1] | C-FRAME GP | |
| 3. | 222-8016 Y | [1] | BLADE GP-ANGLING | |
| 4. | 225-3740 Y | [1] | LINK GP-PITCH | |
| 5. | 227-4036 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 6. | 227-4037 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 7. | 227-8893 Y | [1] | CYLINDER GP-TILT | |
| 8. | 238-9559 Y | [1] | MOUNTING GP-CYLINDER | |
| 9. | 261-0077 Y | [2] | CYLINDER GP-ANGLING | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON UPPER RH CORNER OF BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44580585
222-8020: BULLDOZER AR-PWR ANGLE & TILT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 222-8021 Y | [1] | BLADE GP-ANGLING | |
| 2. | 222-8024 Y | [1] | C-FRAME GP-POWER ANGLING | |
| 3. | 225-3728 Y | [1] | LINES GP-ANGLE & TILT | |
| 4. | 225-3740 Y | [1] | LINK GP-PITCH | |
| 5. | 227-8893 Y | [1] | CYLINDER GP-TILT | |
| 6. | 233-1518 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 7. | 233-1519 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 8. | 238-9559 Y | [1] | MOUNTING GP-CYLINDER | |
| 9. | 261-0077 Y | [2] | CYLINDER GP-ANGLING | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON UPPER RH CORNER OF BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44580586
222-8007: C-FRAME GP
222-8007 C-FRAME GP
S/N B9S1-UP; B8X1-UP
PART OF 222-8010, 222-8015 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
S/N B9S1-UP; B8X1-UP
PART OF 222-8010, 222-8015 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 104-4817 | [1] | PIN | |
| 2. | 193-3063 | [2] | CAP AS-BEARING | |
| 3. | 195-6283 M | [4] | NUT-SQUARE (M30X3.5-THD) | |
| 4. | 213-8458 | [1] | C-FRAME AS | |
| 4A. | 274-1715 | [2] | STEP AS | |
| 4B. | 216-4273 | [2] | BEARING | |
| 4C. | 233-3642 | [1] | TRUNNION AS | |
| 5. | 223-3279 | [1] | RETAINER | |
| 6. | 226-7190 | [2] | PIN | |
| 7. | 226-7191 | [2] | RETAINER | |
| 8. | 226-7194 | [2] | PIN | |
| 9. | 229-1516 | [2] | SPACER (64X72X18-MM THK) | |
| 10. | 229-1517 | [4] | SPACER (50.8X57.15X18-MM THK) | |
| 11. | 245-4227 | [2] | SPACER AS | |
| 12. | 245-4228 | [2] | SPACER AS | |
| 13. | 266-4527 M | [2] | BOLT-SPECIAL | |
| 14. | 178-2992 M | [4] | BOLT (M30X3.5X220-MM) | |
| 15. | 7X-0515 | [2] | WASHER-HARD (17X35X5-MM THK) | |
| 16. | 8T-4123 | [1] | WASHER (3.62X5.75X0.375-MM THK) | |
| 17. | 7X-3392 | [2] | WASHER-HARD (13.5X22.5X3-MM THK) | |
| 18. | 8T-6430 M | [1] | BOLT (M20X2.5X50-MM) | |
| 19. | 8T-7338 M | [2] | BOLT (M16X2X45-MM) | |
| 20. | 9X-8258 | [4] | WASHER (33X56X6-MM THK) | |
| 21. | 9W-7602 B | [52] | SHIM (0.8-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP44580587
222-8024: C-FRAME GP-POWER ANGLING
222-8024 C-FRAME GP-POWER ANGLING
S/N B9Z1-UP
PART OF 222-8020 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
S/N B9Z1-UP
PART OF 222-8020 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-7602 B | [52] | SHIM (0.8-MM THK) | |
| 2. | 104-4817 | [1] | PIN | |
| 3. | 193-3063 | [2] | CAP AS-BEARING | |
| 4. | 195-6283 M | [4] | NUT-SQUARE (M30X3.5-THD) | |
| 5. | 223-2370 | [1] | C-FRAME AS | |
| 6. | 223-3279 | [1] | RETAINER | |
| 7. | 226-7190 | [2] | PIN | |
| 8. | 226-7191 | [2] | RETAINER | |
| 9. | 226-7194 | [2] | PIN | |
| 10. | 229-1516 | [2] | SPACER (64X72X18-MM THK) | |
| 11. | 229-1517 | [4] | SPACER (50.8X57.15X18-MM THK) | |
| 12. | 245-4227 | [2] | SPACER AS | |
| 13. | 245-4228 | [2] | SPACER AS | |
| 14. | 266-4527 M | [2] | BOLT-SPECIAL | |
| 15. | 178-2992 M | [4] | BOLT (M30X3.5X220-MM) | |
| 16. | 7X-0515 | [2] | WASHER-HARD (17X35X5-MM THK) | |
| 17. | 8T-4123 | [1] | WASHER (3.62X5.75X0.375-MM THK) | |
| 18. | 7X-3392 | [2] | WASHER-HARD (13.5X22.5X3-MM THK) | |
| 19. | 8T-6430 M | [1] | BOLT (M20X2.5X50-MM) | |
| 20. | 8T-7338 M | [2] | BOLT (M16X2X45-MM) | |
| 21. | 9X-8258 | [4] | WASHER (33X56X6-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP44580588
225-3740: LINK GP-PITCH
225-3740 LINK GP-PITCH
S/N B9S1-UP; B8X1-UP; B9Z1-UP
PART OF 222-8010, 222-8015, 222-8020 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
S/N B9S1-UP; B8X1-UP; B9Z1-UP
PART OF 222-8010, 222-8015, 222-8020 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 179-8232 | [2] | LOCK PIN | |
| 3. | 225-3730 | [1] | EYE AS (LH) | |
| 4. | 225-3737 | [1] | SLEEVE AS | |
| 5. | 247-4269 | [1] | ROD AS | |
| 6. | 248-5048 | [2] | SPACER (18X55X18-MM THK) | |
| 7. | 257-8475 | [1] | ROD-EYE | |
| 8. | 257-8719 | [1] | GUARD | |
| 9. | 5M-6214 | [1] | PLUG (1/8-27 PTF) | |
| 10. | 8T-0333 | [2] | BEARING | |
| 11. | 8T-4193 M | [2] | BOLT (M16X2X50-MM) | |
| 12. | 8T-9599 | [2] | RING-RETAINING | |
| 13. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| 14. | 9J-4782 | [4] | PROTECTOR | |
| M | METRIC PART | |||
#SEBP44580589
173-1028: ADJUSTER GP-SEAT
173-1028 ADJUSTER GP-SEAT
S/N RFC1-UP; MTJ1-UP; DLM1-UP
PART OF 178-0603, 180-7304 SEAT GP
ALSO AN ATTACHMENT
S/N RFC1-UP; MTJ1-UP; DLM1-UP
PART OF 178-0603, 180-7304 SEAT GP
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6R III TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-8256 | [4] | SPRING | |
| 2. | 117-4492 | [1] | ROD | |
| 3. | 136-1544 | [1] | LATCH AS (LH) | |
| 4. | 156-5545 | [1] | LATCH AS (RH) | |
| 5. | 164-4531 | [1] | ROD | |
| 6. | 170-1112 | [1] | PLATE AS | |
| 7. | 170-1114 | [1] | HANDLE (SLIDE ADJUSTMENT) | |
| 8. | 170-1115 | [1] | HANDLE (TILT ADJUSTMENT) | |
| 9. | 132-0338 | [2] | WASHER-PLASTIC (13X31.7X0.8-MM THK) | |
| 10. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 11. | 7X-0608 | [2] | WASHER-HARD (10.2X16X2-MM THK) |
Information:
HYDRAULIC SYSTEM
VALVE GP-SOLENOID
Special Instruction
Procedure For Blade Solenoid Calibrations on Certain Track-Type Tractors{0785, 5479, 7610}
Procedure For Blade Solenoid Calibrations on Certain Track-Type Tractors{0785, 5479, 7610}
Procedure For Blade Solenoid Calibrations on Certain Track-Type Tractors{0785, 5479, 7610}
Troubleshooting
Service Magazine
