FUEL SYSTEM
CONTROL GP-GOVERNORFILTER GP-FUEL
LINES GP-FUEL
FUEL SYSTEM
CONTROL GP-GOVERNOR
#SEBP44620060
266-6842: CONTROL AR-GOVERNOR
266-6842 CONTROL AR-GOVERNOR -AUTOMATIC IDLE
CANNOT BE USED WITH @@@@@267-1610@@@@@
AN ATTACHMENT
CANNOT BE USED WITH @@@@@267-1610@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 304C CR MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP44620061
294-7797: CONTROL AR-GOVERNOR
294-7797 CONTROL AR-GOVERNOR -AUTOMATIC IDLE
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 304C CR MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP44620062
267-1610: CONTROL GP-GOVERNOR
For full view, you need register
Parts for your 304C CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [7] | STRAP-CABLE | |
| 2. | 7K-1181 | [1] | STRAP-CABLE | |
| 3. | 232-4832 | [2] | BUSHING | |
| 4. | 268-0254 | [1] | CONTROL AS-GOVERNOR | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 5. | 268-0761 | [1] | SWITCH AS-ROTARY (ENGINE SPEED) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 6. | 268-0794 | [1] | HARNESS AS-CONTROL (GOVERNING CONTROL) | |
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 9W-0844 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7. | 271-2029 | [1] | MOTOR AS-GOVERNOR | |
| 8. | 281-8700 | [1] | BRACKET | |
| 9. | 281-8701 | [1] | BRACKET AS | |
| 10. | 281-8702 | [1] | PLATE AS | |
| 11. | 281-8703 | [1] | PLATE | |
| 12. | 281-8706 | [1] | BRACKET AS | |
| 13. | 282-9676 | [1] | BUSHING | |
| 14. | 283-4708 | [1] | PLATE AS | |
| 15. | 095-0843 | [3] | PIN-COTTER | |
| 16. | 150-0597 | [1] | KNOB AS (ENGINE SPEED) | |
| 17. | 273-9459 | [1] | WIRE AS | |
| 18. | 4P-7581 | [1] | CLIP (LADDER) | |
| 19. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 20. | 5C-9553 M | [5] | BOLT (M6X1X16-MM) | |
| 21. | 6V-8231 M | [2] | NUT (M10X1.25-THD) | |
| 22. | 8M-2770 | [1] | CLIP (LOOP) | |
| 23. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 24. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 25. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 26. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 27. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 28. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 29. | 9X-8256 | [7] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP44620063
267-1610: CONTROL GP-GOVERNOR
For full view, you need register
Parts for your 304C CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [7] | STRAP-CABLE | |
| 2. | 7K-1181 | [1] | STRAP-CABLE | |
| 3. | 268-0254 | [1] | CONTROL AS-GOVERNOR | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 4. | 268-0761 | [1] | SWITCH AS-ROTARY (ENGINE SPEED) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 5. | 268-0794 | [1] | HARNESS AS-CONTROL (GOVERNING CONTROL) | |
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 6. | 281-8706 | [1] | BRACKET AS | |
| 7. | 298-5149 C | [1] | PLATE | |
| 8. | 298-5151 C | [1] | BRACKET AS | |
| 9. | 302-8529 C | [1] | MOTOR AS-GOVERNOR | |
| 10. | 150-0597 | [1] | KNOB AS (ENGINE SPEED) | |
| 11. | 273-9459 | [1] | WIRE AS | |
| 12. | 4P-7581 | [1] | CLIP (LADDER) | |
| 13. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 14. | 5C-9553 M | [5] | BOLT (M6X1X16-MM) | |
| 15. | 8M-2770 | [1] | CLIP (LOOP) | |
| 16. | 8T-4121 C | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4137 CM | [1] | BOLT (M10X1.5X20-MM) | |
| 18. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 19. | 8T-4189 CM | [2] | BOLT (M8X1.25X20-MM) | |
| 20. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 21. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 22. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 23. | 9X-8256 | [7] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP44620064
269-5371: CONTROL GP-GOVERNOR
269-5371 CONTROL GP-GOVERNOR -AUTOMATIC IDLE
S/N FPK1-2066
PART OF 266-6842 CONTROL AR-GOVERNOR
AN ATTACHMENT
S/N FPK1-2066
PART OF 266-6842 CONTROL AR-GOVERNOR
AN ATTACHMENT
For full view, you need register
Parts for your 304C CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [7] | STRAP-CABLE | |
| 2. | 7I-2673 | [1] | STRAP-CABLE | |
| 3. | 7K-1181 | [1] | STRAP-CABLE | |
| 4. | 095-0843 | [3] | PIN-COTTER | |
| 5. | 232-4832 | [2] | BUSHING | |
| 6. | 268-0254 | [1] | CONTROL AS-GOVERNOR | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 7. | 268-0761 | [1] | SWITCH AS-ROTARY (ENGINE SPEED) | |
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 8. | 268-0794 | [1] | HARNESS AS-CONTROL (GOVERNING CONTROL) | |
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 9W-0844 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 9. | 281-8701 | [1] | BRACKET AS | |
| 10. | 281-8703 | [1] | PLATE | |
| 11. | 281-8702 | [1] | PLATE AS | |
| 12. | 281-8700 | [1] | BRACKET | |
| 13. | 271-2029 | [1] | MOTOR AS-GOVERNOR | |
| 14. | 281-8706 | [1] | BRACKET AS | |
| 15. | 150-0597 | [1] | KNOB AS (ENGINE SPEED) | |
| 16. | 286-2304 | [1] | SWITCH AS-PRESSURE (PILOT OIL) | |
| 17. | 283-4708 | [1] | PLATE AS | |
| 18. | 8M-2770 | [1] | CLIP (LOOP) | |
| 19. | 4P-7581 | [1] | CLIP (LADDER) | |
| 20. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 21. | 5C-9553 M | [5] | BOLT (M6X1X16-MM) | |
| 22. | 6V-8231 M | [2] | NUT (M10X1.25-THD) | |
| 23. | 282-9676 | [1] | BUSHING | |
| 24. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 26. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 27. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 28. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 29. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 30. | 9X-8256 | [7] | WASHER (6.6X12X2-MM THK) | |
| 31. | 284-3854 | [1] | SWITCH AS (AUTOMATIC ENGINE SPEED CONTROL) | |
| 111-7899 | [1] | GASKET | ||
| M | METRIC PART | |||
#SEBP44620065
269-5371: CONTROL GP-GOVERNOR
269-5371 CONTROL GP-GOVERNOR -AUTOMATIC IDLE
S/N FPK2067-UP
PART OF 266-6842 CONTROL AR-GOVERNOR
AN ATTACHMENT
S/N FPK2067-UP
PART OF 266-6842 CONTROL AR-GOVERNOR
AN ATTACHMENT
For full view, you need register
Parts for your 304C CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [7] | STRAP-CABLE | |
| 2. | 7I-2673 | [1] | STRAP-CABLE | |
| 3. | 7K-1181 | [1] | STRAP-CABLE | |
| 6. | 268-0254 | [1] | CONTROL AS-GOVERNOR | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 7. | 268-0761 | [1] | SWITCH AS-ROTARY (ENGINE SPEED) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 8. | 268-0794 | [1] | HARNESS AS-CONTROL (GOVERNING CONTROL) | |
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 9. | 298-5149 C | [1] | PLATE | |
| 10. | 298-5151 C | [1] | BRACKET AS | |
| 11. | 302-8529 C | [1] | MOTOR AS-GOVERNOR | |
| 12. | 8T-4189 CM | [2] | BOLT (M8X1.25X20-MM) | |
| 14. | 281-8706 | [1] | BRACKET AS | |
| 15. | 150-0597 | [1] | KNOB AS (ENGINE SPEED) | |
| 16. | 349-1812 | [1] | SWITCH AS-PRESSURE (PILOT OIL) | |
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 108-7516 | [1] | FITTING | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 18. | 8M-2770 | [1] | CLIP (LOOP) | |
| 19. | 4P-7581 | [1] | CLIP (LADDER) | |
| 20. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 21. | 5C-9553 M | [5] | BOLT (M6X1X16-MM) | |
| 24. | 8T-4121 C | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4137 CM | [1] | BOLT (M10X1.5X20-MM) | |
| 26. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 27. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 28. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 29. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 30. | 9X-8256 | [7] | WASHER (6.6X12X2-MM THK) | |
| 31. | 284-3854 | [1] | SWITCH AS (AUTOMATIC ENGINE SPEED CONTROL) | |
| 111-7899 | [1] | GASKET | ||
| 32. | 288-3909 | [1] | FILM-NOTICE (ENGINE SPEED CONTROL) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP44620066
294-7798: CONTROL GP-GOVERNOR
294-7798 CONTROL GP-GOVERNOR -AUTOMATIC IDLE
PART OF 294-7797 CONTROL AR-GOVERNOR
Type 1
AN ATTACHMENT
PART OF 294-7797 CONTROL AR-GOVERNOR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 304C CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [7] | STRAP-CABLE | |
| 2. | 7I-2673 | [1] | STRAP-CABLE | |
| 3. | 7K-1181 | [1] | STRAP-CABLE | |
| 4. | 232-4832 | [2] | BUSHING | |
| 5. | 268-0254 | [1] | CONTROL AS-GOVERNOR | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 6. | 268-0761 | [1] | SWITCH AS-ROTARY (ENGINE SPEED) | |
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 7. | 268-0794 | [1] | HARNESS AS-CONTROL (GOVERNING CONTROL) | |
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 8. | 271-2029 | [1] | MOTOR AS-GOVERNOR (ENGINE SPEED) | |
| 9. | 281-8700 | [1] | BRACKET | |
| 10. | 281-8701 | [1] | BRACKET AS | |
| 11. | 281-8702 | [1] | PLATE AS | |
| 12. | 281-8703 | [1] | PLATE | |
| 13. | 281-8706 | [1] | BRACKET AS | |
| 14. | 282-9676 | [1] | BUSHING | |
| 15. | 283-4708 | [1] | PLATE AS | |
| 16. | 286-2304 | [1] | SWITCH AS-PRESSURE (PILOT OIL) | |
| 17. | 095-0843 | [3] | PIN-COTTER | |
| 18. | 150-0597 | [1] | KNOB AS (ENGINE SPEED) | |
| 19. | 292-6666 | [1] | SWITCH AS-ROCKER (AUTOMATIC ENGINE SPEED CONTROL) | |
| 111-7899 | [1] | GASKET | ||
| 20. | 4P-7581 | [1] | CLIP (LADDER) | |
| 21. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 22. | 5C-9553 M | [5] | BOLT (M6X1X16-MM) | |
| 23. | 6V-8231 M | [2] | NUT (M10X1.25-THD) | |
| 24. | 8M-2770 | [1] | CLIP (LOOP) | |
| 25. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 26. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 27. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 28. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 29. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 30. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 31. | 9X-8256 | [7] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP44620067
294-7798: CONTROL GP-GOVERNOR
294-7798 CONTROL GP-GOVERNOR -AUTOMATIC IDLE
PART OF 294-7797 CONTROL AR-GOVERNOR
Type 2
AN ATTACHMENT
PART OF 294-7797 CONTROL AR-GOVERNOR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 304C CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [7] | STRAP-CABLE | |
| 2. | 7I-2673 | [1] | STRAP-CABLE | |
| 3. | 7K-1181 | [1] | STRAP-CABLE | |
| 4. | 268-0254 | [1] | CONTROL AS-GOVERNOR | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 5. | 268-0761 | [1] | SWITCH AS-ROTARY (ENGINE SPEED) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 6. | 268-0794 | [1] | HARNESS AS-CONTROL | |
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 7. | 281-8706 | [1] | BRACKET AS | |
| 8. | 349-1812 | [1] | SWITCH AS-PRESSURE (PILOT OIL) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 108-7516 | [1] | FITTING | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | SEAL-CONNECTOR | |||
| 9. | 298-5149 C | [1] | PLATE | |
| 10. | 298-5151 C | [1] | BRACKET AS | |
| 11. | 302-8529 C | [1] | MOTOR AS-GOVERNOR (ENGINE SPEED) | |
| 12. | 150-0597 | [1] | KNOB AS (ENGINE SPEED) | |
| 13. | 292-6666 | [1] | SWITCH AS-ROCKER (AUTOMATIC ENGINE SPEED CONTROL) | |
| 111-7899 | [1] | GASKET | ||
| 14. | 4P-7581 | [1] | CLIP (LADDER) | |
| 15. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 16. | 5C-9553 M | [5] | BOLT (M6X1X16-MM) | |
| 17. | 8M-2770 | [1] | CLIP (LOOP) | |
| 18. | 8T-4121 C | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4137 CM | [1] | BOLT (M10X1.5X20-MM) | |
| 20. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 21. | 8T-4189 CM | [2] | BOLT (M8X1.25X20-MM) | |
| 22. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 23. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 24. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 9X-8256 | [7] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP44620068
144-9962: FILTER GP-WATER SEP & FUEL
144-9962 FILTER GP-WATER SEP & FUEL
S/N FPK1-6198
PART OF 265-8347 LINES GP-FUEL FILTER
S/N FPK1-6198
PART OF 265-8347 LINES GP-FUEL FILTER
For full view, you need register
Parts for your 304C CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 156-1200 | [1] | FILTER ELEMENT-FUEL (WATER SEPARATOR) | |
| 2. | 149-3516 | [1] | BASE AS | |
| 3. | 118-8118 | [1] | RING-RETAINING | |
| 4. | 112-9401 J | [1] | BOWL AS-WATER COLLECTION | |
| 5. | 118-8119 | [1] | NUT | |
| AVAILABLE REPAIR KIT(S): | ||||
| 121-4480 | [1] | KIT-WATER BASE (WATER SEPARATOR) | ||
| (INCLUDES CAP, NUT, SEALS, PLUGS & O-RING SEAL) | ||||
| 128-8614 J | [1] | KIT-SEAL (WATER SEPARATOR) | ||
| (ALSO INCLUDES SEALS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#SEBP44620069
265-8347: LINES GP-FUEL FILTER
For full view, you need register
Parts for your 304C CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-4278 | [10] | CLAMP-HOSE | |
| 2. | 3S-2093 | [1] | STRAP-CABLE | |
| 3. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 4. | 144-9962 Y | [1] | FILTER GP-WATER SEP & FUEL | |
| 5. | 151-1975 | [1] | CONNECTOR | |
| 6. | 240-8381 | [1] | PUMP AS-FUEL | |
| 7. | 265-8588 | [1] | TUBE AS | |
| 8. | 278-4624 | [1] | BRACKET AS | |
| 9. | 148-8405 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 1J-9671 | [1] | SEAL-O-RING | ||
| 3K-8460 | [1] | PLUG (1/2-20-THD) | ||
| 10. | 160-0614 | [1] | TUBE AS | |
| 11. | 170-1061 | [1] | CONNECTOR AS | |
| 5P-7814 | [1] | SEAL-O-RING | ||
| 8L-2779 | [1] | SEAL-O-RING | ||
| 8T-5043 | [1] | ADAPTER | ||
| 12. | 174-5907 | [1] | CLIP (LOOP) | |
| 13. | 1J-9671 | [1] | SEAL-O-RING | |
| 14. | 4M-7470 | [1] | GROMMET | |
| 15. | 4P-8134 | [1] | CLIP (LADDER) | |
| 16. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 17. | 6K-8178 | [1] | CLIP (LOOP) | |
| 18. | 7X-7729 | [3] | WASHER (11X25X3-MM THK) | |
| 19. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 21. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 22. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-4182 M | [1] | BOLT (M10X1.5X45-MM) | |
| 24. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 25. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 26. | 9X-6165 | [2] | WASHER (6.5X22X2.5-MM THK) | |
| 27. | 7I-7439 E | GUARD-HOSE (25-CM) | ||
| 27A. | 7I-7439 E | GUARD-HOSE (33-CM) | ||
| 29. | 8C-6959 E | HOSE (23-CM) | ||
| 30. | 5P-1420 E | HOSE (19.2-CM) | ||
| 30A. | 5P-1420 E | HOSE (19-CM) | ||
| 30B. | 5P-1420 E | HOSE (30-CM) | ||
| 30C. | 5P-1420 E | HOSE (92-CM) | ||
| 30D. | 5P-1420 E | HOSE (129-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
FUEL SYSTEM
CONTROL GP-GOVERNOR
Specifications
Service Magazine
