382-0796 FILM GP -WASTE HANDLER S/N K5K1000-UP 950H WHEEL LOADER

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

0. 382-0796 FILM GP

GASKET & SEAL KITS

1. 271-2910 KIT-GASKET
2. 290-0528 KIT-GASKET
3. 308-3436 KIT-GASKET
4. 318-9646 KIT-GASKET
5. 318-9648 KIT-GASKET
6. 320-5170 KIT-GASKET
7. 345-1909 KIT-GASKET
8. 450-6176 KIT-GASKET
9. 450-6179 KIT-GASKET
0. INFORMATION

WHEEL LOADER 950H WHEEL LOADER K5K
950H PhII Wheel Loader K5K01000-UP (MACHINE) POWERED BY C7 Engine SEBP4473 950H K5K (2005)

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

382-0794 FILM GP

382-0795 FILM GP

382-0796 FILM GP

237-0440 PLATE & FILM GP

247-9876 PLATE & FILM GP

272-7285 PLATE & FILM GP

#SEBP44731490

382-0796: FILM GP

FILM GP

382-0796 FILM GP -WASTE HANDLER
S/N K5K1000-UP

i04898032 SEBP4473

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	381-9075	[2]	FILM-IDENTIFICATION (WASTE HANDLER)

#SEBP44731491

271-2910: KIT-GASKET

KIT-GASKET

271-2910 KIT-GASKET
S/N K5K1000-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES.
FIELD REPLACEMENT FOR @@@@@450-2550@@@@@
FOR USE WITH @@@@@235-1424@@@@@, @@@@@338-9078@@@@@, @@@@@235-1424@@@@@, E683- ENGINE S/N HEP 1-UP

i05817923 SEBP4473

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
200-2258	[1]	GASKET
448-0607	[1]	GASKET
6V-3250	[1]	SEAL-O-RING
6V-6609	[1]	SEAL-O-RING
3J-1907	[1]	SEAL-O-RING
147-0182	[1]	SEAL-O-RING
384-9992	[1]	SEAL-O-RING
3K-0360	[3]	SEAL-O-RING
6V-5063	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP44731492

290-0528: KIT-GASKET

KIT-GASKET

290-0528 KIT-GASKET -REAR STRUCTURE
S/N K5K1000-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET.

i05873250 SEBP4473

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-1162	[1]	GASKET (DRAIN PLUG)
2.	3K-3257	[1]	GASKET
3.	239-0583	[1]	GASKET
4.	247-1876	[1]	SEAL
5.	222-3910	[1]	SEAL GP-CRANKSHAFT (REAR)
6.	214-7566	[2]	SEAL-O-RING
7.	238-5082	[2]	SEAL-O-RING

			FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

			HTTP://DEALER.CAT.COM/RELATED

#SEBP44731493

308-3436: KIT-GASKET

KIT-GASKET

308-3436 KIT-GASKET -WATER PUMP
S/N K5K1000-UP

i05926749 SEBP4473

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
200-2258	[1]	GASKET
2M-9780	[2]	SEAL-O-RING
4J-0524	[1]	SEAL-O-RING
1J-9671	[1]	SEAL-O-RING
2M-4453	[1]	SEAL-O-RING
3D-2824	[2]	SEAL-O-RING
3J-1907	[1]	SEAL-O-RING
3K-0360	[4]	SEAL-O-RING
4J-0525	[1]	SEAL-O-RING
6V-5063	[1]	SEAL-O-RING

#SEBP44731494

318-9646: KIT-GASKET

KIT-GASKET

318-9646 KIT-GASKET
S/N K5K1000-UP
KIT CONTAINS GASKET, SEALS,AND BENDABLE LOCKS TO REBUILD AND REINSTALL. ENGINE MOUNTED FUEL SYSTEM COMPONENTS. KIT DOES NOTINCLUDE INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED

i06898138 SEBP4473

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
2M-9780	[4]	SEAL-O-RING
3J-1907	[2]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
4F-9653	[1]	SEAL-O-RING
5H-8853	[2]	SEAL-O-RING
6V-8397	[5]	SEAL-O-RING
033-6027	[1]	SEAL-O-RING
214-7568	[4]	SEAL-O-RING
227-5904	[1]	SEAL-O-RING
228-7089	[2]	SEAL-O-RING
220-8678	[1]	SEAL-RING


		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP44731495

318-9648: KIT-GASKET

KIT-GASKET

318-9648 KIT-GASKET
S/N K5K1000-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE
FOR USE WITH @@@@@235-1422@@@@@

i06883995 SEBP4473

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
210-7722	[4]	BOLT-FLANGE HEAD (M10X1.5-THD)
7C-7431	[1]	GASKET
197-8419	[1]	GASKET (TURBOCHARGER)
375-2467 M	[4]	LOCKNUT-FLANGE (M10X1.5-THD)
3J-1907	[1]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
210-9246	[1]	SEAL-O-RING
214-7568	[1]	SEAL-O-RING
228-7089	[1]	SEAL-O-RING
203-3768	[4]	SPACER (11X16X60-MM THK)
418-6781 M	[4]	STUD-TAPERLOCK (M10X1.5X40-MM)


		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED
M		METRIC PART

#SEBP44731496

320-5170: KIT-GASKET

KIT-GASKET

320-5170 KIT-GASKET -SINGLE CYLINDER HEAD
S/N K5K1000-UP
CONTAINS THE GASKETS, SEALS, BENDABLE LOCKS TO REBUILD, REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 AND 6 CYLINDER ENGINES. WITH ONE CYLINDER HEAD ONLY, THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED. BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
FOR USE WITH @@@@@235-1422@@@@@

i06502056 SEBP4473

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
210-7722	[4]	BOLT-FLANGE HEAD (M10X1.5-THD)
4Y-9652	[3]	GASKET (SIDE COVER)
7C-7431	[1]	GASKET (TURBOCHARGER)
126-5466	[1]	GASKET
144-3472	[1]	GASKET (AIR INLET MANIFOLD)
197-8419	[1]	GASKET (TURBOCHARGER)
222-5915	[1]	GASKET
272-1956	[6]	GASKET
133-4995	[1]	GASKET AS-CYLINDER HEAD
136-0812	[1]	GASKET-WATER REGULATOR
375-2467 M	[4]	LOCKNUT-FLANGE (M10X1.5-THD)
304-4924	[1]	SEAL AS
2M-9780	[3]	SEAL-O-RING
3J-1907	[7]	SEAL-O-RING
3J-7354	[1]	SEAL-O-RING
3K-0360	[6]	SEAL-O-RING
6V-5048	[6]	SEAL-O-RING
6V-8397	[3]	SEAL-O-RING
7J-0204	[2]	SEAL-O-RING
8H-2046	[1]	SEAL-O-RING
9X-7712	[2]	SEAL-O-RING
214-7566	[6]	SEAL-O-RING
214-7568	[5]	SEAL-O-RING
228-7089	[3]	SEAL-O-RING
238-5084	[2]	SEAL-O-RING
310-7255	[6]	SEAL-O-RING
310-7257	[6]	SEAL-O-RING
272-0388	[1]	SEAL-VALVE COVER
147-8214	[12]	SEAL-VALVE STEM
163-2478	[6]	SEAL-VALVE STEM
203-3768	[4]	SPACER (11X16X60-MM THK)
418-6781 M	[4]	STUD-TAPERLOCK (M10X1.5X40-MM)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
M		METRIC PART

#SEBP44731497

345-1909: KIT-GASKET

KIT-GASKET

345-1909 KIT-GASKET -OIL COOLER, LINES
S/N K5K1000-UP
CONTAINS THE GASKETS , SEALS TO ASSEMBLE , REINSTALL THE OIL COOLER(S). OIL FILTER BASE & ATTACHING LINES
FOR USE WITH @@@@@235-1422@@@@@

i06501977 SEBP4473

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
240-2767	[1]	GASKET
300-7933	[1]	GASKET
3J-1907	[1]	SEAL-O-RING
2M-9780	[2]	SEAL-O-RING
3J-7354	[1]	SEAL-O-RING
3P-1156	[2]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
8L-2786	[1]	SEAL-O-RING
214-7566	[1]	SEAL-O-RING
214-7568	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED

#SEBP44731498

450-6176: KIT-GASKET

KIT-GASKET

450-6176 KIT-GASKET -SINGLE CYLINDER HEAD
S/N K5K1000-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CLYINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
FOR USE WITH @@@@@235-1424@@@@@

i06071496 SEBP4473

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
7C-7431	[1]	GASKET
126-5466	[1]	GASKET
197-8419	[1]	GASKET (TURBOCHARGER)
222-5915	[1]	GASKET
272-1956	[6]	GASKET
133-4995	[1]	GASKET AS-CYLINDER HEAD
282-2468 ABH		GASKET-CYLINDER HEAD
282-2474 ABJ		GASKET-CYLINDER HEAD
3E-8017 M	[4]	LOCKNUT (M10X1.5-THD)
304-4924	[1]	SEAL AS
2M-9780	[2]	SEAL-O-RING
3J-1907	[3]	SEAL-O-RING
3K-0360	[2]	SEAL-O-RING
6V-3250	[2]	SEAL-O-RING
6V-3251	[1]	SEAL-O-RING
6V-6609	[2]	SEAL-O-RING
6V-8397	[3]	SEAL-O-RING
7F-8268	[1]	SEAL-O-RING
8L-2786	[1]	SEAL-O-RING
214-7566	[9]	SEAL-O-RING
214-7567	[2]	SEAL-O-RING
214-7568	[9]	SEAL-O-RING
228-7089	[2]	SEAL-O-RING
238-5079	[2]	SEAL-O-RING
238-5080	[2]	SEAL-O-RING
238-5084	[2]	SEAL-O-RING
272-0388	[1]	SEAL-VALVE COVER
418-6781 M	[4]	STUD-TAPERLOCK (M10X1.5X40-MM)
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED
H		(PART NUMBER FOR STANDARD CYLINDER HEAD GASKET)
J		(PART NUMBER FOR THICK CYLINDER HEAD GASKET)
M		METRIC PART

#SEBP44731499

450-6179: KIT-GASKET

KIT-GASKET

450-6179 KIT-GASKET
S/N K5K1000-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS.
FOR USE WITH @@@@@235-1424@@@@@

i05842248 SEBP4473

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
8C-3445	[1]	CAP-DUST
4Y-9652	[2]	GASKET
7W-5340	[1]	GASKET
371-3481	[1]	GASKET
166-2905	[1]	SEAL-INTEGRAL
2M-9780	[1]	SEAL-O-RING
3J-7354	[2]	SEAL-O-RING
3K-0360	[2]	SEAL-O-RING
3P-1156	[2]	SEAL-O-RING
4F-9653	[1]	SEAL-O-RING
4J-5477	[2]	SEAL-O-RING
5H-8853	[1]	SEAL-O-RING
6V-5063	[2]	SEAL-O-RING
210-9246	[1]	SEAL-O-RING
214-7566	[1]	SEAL-O-RING
228-7088	[1]	SEAL-O-RING
238-5080	[2]	SEAL-O-RING
214-7568	[1]	SEAL-O-RING
238-5081	[2]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED