AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

279-9873 MOTOR GP-TRAVEL PART OF 279-9869 DRIVE GP-FINAL 1190 TRACK FELLER BUNCHER


HYDRAULIC SYSTEM
MOTOR GP
LINES GP-FRONT
PUMP GP

TRACK FELLER BUNCHER 1190 TRACK FELLER BUNCHER BZK
 1190 Track Feller Buncher BZK02160-UP (MACHINE) SEBP4478 1190 BZK   (2003)

HYDRAULIC SYSTEM

MOTOR GP
MOTOR GP-SWING
334-9971 MOTOR GP-SWING
MOTOR GP-SWING
334-9978 MOTOR GP-SWING
MOTOR GP-TRAVEL
279-9873 MOTOR GP-TRAVEL
ROTATING GP-MOTOR
190-8121 ROTATING GP-MOTOR
ROTATING GP-MOTOR
191-0883 ROTATING GP-MOTOR
SHAFT GP-HYDRAULIC MOTOR
191-0886 SHAFT GP-HYDRAULIC MOTOR
 

#SEBP44780200
 

279-9873: MOTOR GP-TRAVEL

279-9873 MOTOR GP-TRAVEL
PART OF 279-9869 DRIVE GP-FINAL
i02429372 SEBP4478
2799873 MOTOR GP-TRAVEL Parts scheme
  For full view, you need register

Parts for your 1190 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 190-8121 Y [1] ROTATING GP-MOTOR  
2. 192-2891 [1] HOUSING  
3. 125-1379 M [1] SETSCREW-SOCKET (M12X1.75-THD)  
4. 6E-3283 M [2] LOCKNUT (M12X1.75-THD)  
5. 6F-4718 [1] SEAL-O-RING  
6. 192-2892 Y [1] HEAD GP-MOTOR (TRAVEL)  
7. 9X-7680 [1] SEAL-O-RING  
8. 123-4954 M [1] SETSCREW (M12X1.75-THD)  
9. 124-9913 [1] SEAL-SHAFT  
10. 124-9914 B [1] SHIM (3-MM THK)  
11. 2W-1145 [1] RING-RETAINING (INTERNAL)  
12. 9S-8005 [2] PLUG (3/4-16-THD)  
13. 3K-0360 [2] SEAL-O-RING  
14. 197-7471 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44780201
 

206-6508: PLUG GP-HYDRAULIC LINES

206-6508 PLUG GP-HYDRAULIC LINES
CANNOT BE USED WITH ANY HEAD AR
AN ATTACHMENT
i01880929 SEBP4478
  For full view, you need register

Parts for your 1190 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6V-9830 [5] CAP (ORFS)  
  6V-9832 [4] CAP (ORFS)  
 

#SEBP44780202
 

217-9690: PUMP & LINES GP-HYD TANK FILL

217-9690 PUMP & LINES GP-HYD TANK FILL
PART OF 272-0056 HYDRAULIC AR
i02227443 SEBP4478
2179690 PUMP & LINES GP-HYD TANK FILL Parts scheme
  For full view, you need register

Parts for your 1190 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-2279 [1] PLUG-PIPE  
2. 205-5266 Y [1] PUMP & MOTOR GP (HYDRAULIC TANK FILL)  
3. 215-6431 [1] TUBE AS  
4. 220-0498 [1] HOLDER AS  
4A. 3B-7726 [1] CAP-PIPE  
5. 242-3247 [1] VALVE AS-CHECK (HYDRAULIC TANK FILL PUMP)  
6. 252-0907 I [1] HOSE AS  
7. 252-1701 [1] BRACKET AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
8. 263-2201 I [1] HOSE AS  
9. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
10. 153-6244 [1] ELBOW AS  
  2M-9780 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  8T-5389 [1] ELBOW  
11. 2R-1498 [1] GROMMET  
12. 4D-7388 [1] CLIP (LOOP)  
13. 5K-9090 [1] SEAL-O-RING  
14. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 M [1] NUT (M10X1.5-THD)  
16. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
17. 8T-4189 M [8] BOLT (M8X1.25X20-MM)  
18. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
19. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
20. 9L-1775 [1] BRACKET  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44780203
 

205-5266: PUMP & MOTOR GP

205-5266 PUMP & MOTOR GP -HYDRAULIC TANK FILL
PART OF 217-9690 PUMP & LINES GP-HYD TANK FILL
i02093695 SEBP4478
2055266 PUMP & MOTOR GP Parts scheme
  For full view, you need register

Parts for your 1190 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 229-9380 [1] PUMP GP-GEAR (SECONDARY STEERING)  
2. 201-0416 [1] FLANGE  
3. 201-0417 [1] COVER  
4. 117-5268 [1] GASKET  
5. 117-3915 Y [1] MOTOR GP-ELECTRIC (24-VOLT)(HYDRAULIC TANK)  
   
    AVAILABLE REPAIR KIT(S):
  200-4305 KIT-SEAL  
    (INCLUDES SEAL SHAFT, O-RINGS, E-RINGS & BACKUP RINGS)
  Y   SEPARATE ILLUSTRATION
 

#SEBP44780204
 

212-8039: PUMP & MOTOR GP-HOOD TILT

212-8039 PUMP & MOTOR GP-HOOD TILT
PART OF 317-5827 LINES GP-HOOD TILT, 217-9693 TILT GP-HOOD
i01987294 SEBP4478
2128039 PUMP & MOTOR GP-HOOD TILT Parts scheme
  For full view, you need register

Parts for your 1190 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-5794 [1] MOTOR-ELECTRIC (HOOD TILT)  
2. 132-6777 [1] SWITCH (HOOD TILT)  
3. 223-8844 [1] VALVE  
4. 223-8823 [1] VALVE  
5. 149-1973 [3] BOOT  
6. [3] BOOT  
7. 105-8097 [1] TUBE  
8. 105-8098 [1] TUBE  
9. 105-8096 [1] SCREEN-FILTER (HYDRAULIC OIL)  
10. 149-1137 [1] CABLE AS  
11. 329-5298 [1] GAUGE-OIL LEVEL (DIPSTICK) (HYDRAULIC OIL)  
12. 331-8194 [1] RESERVOIR  
 

#SEBP44780205
 

217-9700: PUMP & MTG GP-MAIN HYDRAULIC

217-9700 PUMP & MTG GP-MAIN HYDRAULIC -FELLING HEAD
PART OF 242-5335 CONVERSION AR-MACHINE
AN ATTACHMENT
i01844699 SEBP4478
2179700 PUMP & MTG GP-MAIN HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 1190 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 268-6729 Y [1] PUMP GP-PISTON (MAIN HYDRAULIC-FELLING HEAD)  
2. 8T-5360 [7] WASHER (12X22.5X2.5-MM THK)  
3. 8T-8916 [7] BOLT (7/16-14X1.5-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP44780206
 

308-0095: PUMP & MTG GP-MAIN HYDRAULIC

308-0095 PUMP & MTG GP-MAIN HYDRAULIC
PART OF 272-0056 HYDRAULIC AR
i02891448 SEBP4478
3080095 PUMP & MTG GP-MAIN HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 1190 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 308-0094 Y [1] PUMP GP-PISTON (MAIN HYDRAULIC)  
2. 8T-5360 [7] WASHER (12X22.5X2.5-MM THK)  
3. 8T-8916 [7] BOLT (7/16-14X1.5-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP44780207
 

268-6729: PUMP GP-PISTON

268-6729 PUMP GP-PISTON -MAIN HYDRAULIC, FELLING HEAD
MAIN HYDRAULIC, FELLING HEAD
PART OF 217-9700 PUMP & MTG GP-MAIN HYDRAULIC
AN ATTACHMENT
i02308353 SEBP4478
2686729 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 1190 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 270-4694 Y [1] HEAD GP-PUMP (MAIN HYDRAULIC)  
2. 081-3801 [3] PLUG AS  
    (EACH INCLUDES)
  126-9092 [1] SEAL  
3. 188-4094 [2] BEARING  
4. 177-2484 [1] KEY-WOODRUFF  
5. 177-2480 [1] GEAR  
6. 242-6775 [1] SHAFT  
7. 188-4093 [1] HOUSING  
8. 8T-8441 M [4] BOLT-SOCKET HEAD (M12X1.75X25-MM)  
9. 2W-1145 [1] RING-RETAINING (INTERNAL)  
10. 177-2482 B [1] SHIM (1-MM THK)  
11. 124-9913 [1] SEAL-SHAFT  
12. 216-0034 Y [1] ROTATING GP-PUMP (HYDRAULIC)  
13. 9T-3928 [1] PLUG AS  
  187-8001 [1] SEAL  
14. 216-0035 Y [1] ROTATING GP-PUMP (HYDRAULIC)  
15. 5F-3106 [1] SEAL-O-RING  
16. 198-3818 [1] FLANGE  
17. 5F-3144 [1] SEAL-O-RING  
18. 2D-5658 [1] BALL BEARING  
19. 229-6622 [1] GEAR (46-TEETH)  
20. 095-0991 [1] BALL BEARING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44780208
 

268-8259: PUMP GP-PISTON

268-8259 PUMP GP-PISTON -SAW
PART OF 282-3071 LINES GP-PUMP, 253-2607, 256-0350 LINES GP-SAW
AN ATTACHMENT
i02322750 SEBP4478
2688259 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 1190 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-0670 M [4] BOLT (M12X1.75X45-MM)  
2. 221-1384 [1] HEAD GP-PUMP (CLOCKWISE ROTATION)  
3. 262-4405 [1] KIT-SEAL  
    (INCLUDES SHAFT SEAL, O-RING PLUG & O-RINGS)
4. 262-7896 [1] KIT-PUMP ROTATING GROUP  
    (INCLUDES VALVE PLATE, BARREL AS, BALL SEAT, SLIPPER RETAINER & PISTON SLIPPER ASSEMBLIES)
5. 221-1340 [1] KIT-SHAFT  
6. 221-1351 [1] COMPENSATOR AS  
7. 221-1287 [1] SWASHPLATE AS  
8. 221-1375 [2] BEARING  
9. 221-9393 [1] PLUG AS  
10. 9S-8008 [1] PLUG (1-1/16-12-THD)  
11. 110-6349 [1] FITTING AS (QUICK DISCONNECT)  
12. 9S-9334 [1] PLUG  
13. 9S-8001 [6] PLUG  
14. 9S-8006 [1] PLUG (7/8-14-THD)  
15. 9S-8002 [1] PLUG (7/16-20-THD)  
16. 127-0785 [1] ELBOW  
  M   METRIC PART
 

#SEBP44780209
 

308-0094: PUMP GP-PISTON

308-0094 PUMP GP-PISTON -MAIN HYDRAULIC
PART OF 308-0095 PUMP & MTG GP-MAIN HYDRAULIC
i02891457 SEBP4478
3080094 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 1190 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 308-4488 Y [1] HEAD GP-PUMP (MAIN HYDRAULIC)  
2. 081-3801 [3] PLUG AS  
    (EACH INCLUDES)
  126-9092 [1] SEAL  
3. 188-4094 [2] BEARING  
4. 177-2484 [1] KEY-WOODRUFF  
5. 216-0040 [1] GEAR  
6. 242-6775 [1] SHAFT  
7. 188-4093 [1] HOUSING  
8. 8T-8441 M [4] BOLT-SOCKET HEAD (M12X1.75X25-MM)  
9. 2W-1145 [1] RING-RETAINING (INTERNAL)  
10. 177-2482 B [1] SHIM (1-MM THK)  
11. 124-9913 [1] SEAL-SHAFT  
12. 283-5977 Y [1] ROTATING GP-PUMP  
13. 9T-3928 [1] PLUG AS  
  187-8001 [1] SEAL  
14. 283-5978 Y [1] ROTATING GP-PUMP (MAIN HYDRAULIC)  
15. 5F-3106 [1] SEAL-O-RING  
16. 198-3818 [1] FLANGE  
17. 5F-3144 [1] SEAL-O-RING  
18. 2D-5658 [1] BALL BEARING  
19. 229-6622 [1] GEAR (46-TEETH)  
20. 095-0991 [1] BALL BEARING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
Technical Information Bulletin
Valve Plates for Some Hydraulic Motors May Have Poor Surface Finishes{5058}
Valve Plates for Some Hydraulic Motors May Have Poor Surface Finishes{5058}
Specifications
Swing Motor
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers
Hydraulic Tank Fill Pump and Motor
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers
Travel Motor
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
Systems Operation
Travel Motor
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Head (Travel Motor)
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Swing Motor
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Parking Brake
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Swing System
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Travel System
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1090, 1190, 1190T, 1290T, TK711, TK721, TK722, AND TK732 TRACK FELLER BUNCHERS
Testing and Adjusting
Travel Motor Case Drain Oil - Measure
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Swing Speed and Overswing on Level Ground - Check
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Disc Saw Performance - Test and Adjust
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Machine Drift on a Slope - Check
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Swing Speed and Swing Drift on a Slope - Check
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Travel Motor Head - Test and Adjust
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Relief Valve (Line for Travel Motor) - Test and Adjust
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Travel Motor Brake Release Pressure - Test and Adjust
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Travel on Level Ground - Test and Adjust
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Swing Motor Relief Valve Pressure - Test and Adjust
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Swing Motor Case Drain Oil - Measure
1090 Series II, 1190 Series II, 1190T Series II and 1290T Series II Track Feller Bunchers Machine Systems
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Service Magazine
Adapters Have Been Used on Travel Motors {4351, 5058}
2006/12/11

Caterpillar Parts SIS Catalog 1190 :

MOTOR GP-SWING
334-9978 MOTOR GP-SWING
MOTOR GP-SWING
334-9971 MOTOR GP-SWING
MOTOR GP-SWING
188-4175 MOTOR GP-SWING
MOTOR GP-SWING
179-9775 MOTOR GP-SWING
MOTOR & MTG GP-SWING
281-6404 MOTOR & MTG GP-SWING
MOTOR & MTG GP-SWING
281-6404 MOTOR & MTG GP-SWING
MOTOR & MTG GP-SWING
281-6404 MOTOR & MTG GP-SWING
206-1513 MOTOR & MTG GP-SWING
206-6508 PLUG GP-HYDRAULIC LINES
PUMP & LINES GP-HYD TANK FILL
217-9690 PUMP & LINES GP-HYD TANK FILL
PUMP & MOTOR GP
205-5266 PUMP & MOTOR GP
PUMP & MOTOR GP-HOOD TILT
212-8039 PUMP & MOTOR GP-HOOD TILT
PUMP & MTG GP-MAIN HYDRAULIC
217-9700 PUMP & MTG GP-MAIN HYDRAULIC
PUMP & MTG GP-MAIN HYDRAULIC
308-0095 PUMP & MTG GP-MAIN HYDRAULIC
PUMP GP-PISTON
268-6729 PUMP GP-PISTON
PUMP GP-PISTON
268-8259 PUMP GP-PISTON

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.