AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

315-4393 PUMP GP-PISTON & GEAR S/N C5K223-223; LEM209-225 PART OF 295-9674 PUMP GP-MAIN HYDRAULIC FIELD REPLACEMENT ORDER @@@@@322-8733@@@@@ 330D MH


HYDRAULIC SYSTEM
PUMP GP
MOTOR GP
PUMP GP
FILTER GP
SWIVEL GP
TANK GP

EXCAVATOR 330D MH EXCAVATOR C5K
 330D Material Handler (HCR & FCR) C5K00001-UP (MACHINE) POWERED BY C9 Engine SEBP4489 330D MH C5K   (2006)

HYDRAULIC SYSTEM

PUMP GP
PUMP GP-PISTON
283-6116 PUMP GP-PISTON
PUMP GP-PISTON
295-9655 PUMP GP-PISTON
PUMP GP-PISTON & GEAR
315-4393 PUMP GP-PISTON & GEAR
PUMP GP-PISTON & GEAR
497-8499 PUMP GP-PISTON & GEAR
ROTATING GP-PUMP
155-9111 ROTATING GP-PUMP
ROTATING GP-PUMP
266-7833 ROTATING GP-PUMP
 

#SEBP44890670
 

315-4393: PUMP GP-PISTON & GEAR

315-4393 PUMP GP-PISTON & GEAR
S/N C5K223-223; LEM209-225
PART OF 295-9674 PUMP GP-MAIN HYDRAULIC
FIELD REPLACEMENT ORDER @@@@@322-8733@@@@@
i02914271 SEBP4489
3154393 PUMP GP-PISTON & GEAR Parts scheme 3154393 PUMP GP-PISTON & GEAR Parts scheme 3154393 PUMP GP-PISTON & GEAR Parts scheme
  For full view, you need register

Parts for your 330D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 274-2490 [1] PUMP GP-GEAR  
  246-9867 [1] SEAL-O-RING  
  247-8841 M [2] BOLT (M10X1.5X30-MM)  
2. 242-6920 M [8] BOLT (M8X30-MM)  
3. 247-8985 [4] DOWEL  
4. 247-8729 [2] COVER  
5. 242-6919 M [2] SETSCREW (M20X2.5X56-MM)  
6. 8T-4131 M [2] NUT (M20X2.5-THD)  
7. 6V-8200 M [8] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
8. 7I-8166 [2] STOPPER  
9. 109-1296 [2] SEAL-O-RING  
10. 7I-8172 [2] RING-BACKUP  
11. 242-6914 [2] PISTON-SERVO  
12. 247-8712 [2] PIN AS  
13. 7I-8152 [18] SPRING-CYLINDER  
14. 109-1294 [2] SEAL-O-RING  
15. 7I-8171 [2] RING-BACKUP  
16. 242-6915 [2] STOPPER  
17. 095-0965 [11] PLUG  
18. 095-0966 [2] PLUG  
19. 242-6918 M [2] NUT (M20X2.5-THD)  
20. 200-3292 M [2] SETSCREW (M20X2.5X90-MM)  
21. 264-8266 M [1] BOLT-SOCKET HEAD (M22X2.5X130-MM)  
22. 234-4539 [2] DOWEL  
23. 249-1306 M [10] BOLT-SOCKET HEAD (M22X2.5X60-MM)  
24. 242-6916 [2] GASKET  
25. 110-5525 [4] PLUG  
26. 153-4906 [4] SEAL-O-RING  
27. 295-9656 [2] PISTON AS  
28. 7I-8154 [2] PLATE  
29. 242-6912 [2] PLATE  
30. 242-6913 [2] RETAINER-BALL  
31. 289-8172 [2] SWASHPLATE AS  
32. 7I-8084 [20] PLUG  
33. 311-9548 [4] PLUG  
34. 247-8725 [2] PLATE  
35. 095-0882 [4] PIN-SPRING  
36. 247-8786 [2] DOWEL  
37. 206-9290 [9] SEAL-O-RING  
38. 295-9695 [1] SEAL-LIP TYPE  
39. 095-0944 [1] RING-RETAINING  
40. 249-6657 [1] SEAL-O-RING  
41. 289-8174 [1] GEAR-DRIVE  
42. 289-8175 [1] GEAR-DRIVEN  
43. 6V-5204 [1] RING-RETAINING  
44. 247-8718 [1] SPACER (44.5X68X3-MM THK)  
45. 289-8173 [1] FLANGE  
46. 8T-0343 M [11] BOLT-SOCKET HEAD (M12X1.75X55-MM)  
47. 8T-4241 [3] RING-RETAINING (EXTERNAL)  
48. 247-8787 [2] RING-RETAINING  
49. 247-8719 [3] SPACER (50X64X3-MM THK)  
50. 259-0835 [1] BODY  
51. 295-9658 [1] BARREL AS  
52. 259-0832 [1] SHAFT-DRIVEN  
53. 247-8715 [2] BEARING-NEEDLE  
54. 295-9659 [1] BLOCK-PORT  
55. 295-9657 [1] BARREL AS  
56. 249-1307 M [2] BOLT-SOCKET HEAD (M22X2.5X95-MM)  
57. 247-8713 [2] BEARING-ROLLER  
58. 8T-9080 M [8] BOLT-SOCKET HEAD (M12X1.75X20-MM)  
59. 225-4516 [1] PLATE  
60. 249-6670 [1] SEAL-O-RING  
61. 247-8720 [2] SPACER (95X110X3.2-MM THK)  
62. 247-8717 [2] SPACER (65X90X1-MM THK)  
63. 095-0929 [2] RING-RETAINING  
64. 247-8726 [1] COVER  
65. 259-0831 [1] SHAFT-DRIVE  
66. 206-9291 [2] SEAL-O-RING  
67. 225-4518 Y [1] VALVE GP-SOLENOID (PUMP CONTROL)  
68. 295-9660 Y [2] HEAD GP-PUMP  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44890671
 

497-8499: PUMP GP-PISTON & GEAR

497-8499 PUMP GP-PISTON & GEAR
S/N C5K221-222
PART OF 315-4400 KIT-PUMP
i07508038 SEBP4489
4978499 PUMP GP-PISTON & GEAR Parts scheme 4978499 PUMP GP-PISTON & GEAR Parts scheme 4978499 PUMP GP-PISTON & GEAR Parts scheme
  For full view, you need register

Parts for your 330D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 342-1882 [1] PUMP GP-GEAR  
  246-9867 [1] SEAL-O-RING  
  247-8841 M [2] BOLT (M10X1.5X30-MM)  
2. 252-9167 M [8] BOLT-SOCKET HEAD (M8X1.25X30-MM)  
3. 247-8985 [4] DOWEL  
4. 247-8729 [2] COVER  
5. 242-6919 M [2] SETSCREW (M20X2.5X56-MM)  
6. 451-2184 M [2] NUT (M20X2.5-THD)  
7. 6V-8200 M [8] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
8. 7I-8166 [2] STOPPER  
9. 109-1296 [2] SEAL-O-RING  
10. 7I-8172 [2] RING-BACKUP  
11. 242-6914 [2] PISTON-SERVO  
12. 488-4578 [2] PIN AS  
13. 7I-8152 [18] SPRING-CYLINDER  
14. 109-1294 [2] SEAL-O-RING  
15. 7I-8171 [2] RING-BACKUP  
16. 242-6915 [2] STOPPER  
17. 295-9660 Y [2] HEAD GP-PUMP  
18. 497-8514 Y [1] VALVE GP-SOLENOID (PROPORTIONAL REDUCING)  
19. 242-6918 M [2] NUT (M20X2.5-THD)  
20. 200-3292 M [2] SETSCREW (M20X2.5X90-MM)  
21. 264-8266 M [1] BOLT-SOCKET HEAD (M22X2.5X130-MM)  
22. 234-4539 [2] DOWEL  
23. 249-1306 M [10] BOLT-SOCKET HEAD (M22X2.5X60-MM)  
24. 326-4415 [2] GASKET  
25. 110-5525 [4] PLUG  
26. 214-7568 [4] SEAL-O-RING  
27. 295-9656 [2] PISTON AS  
28. 7I-8154 [2] PLATE  
29. 242-6912 [2] PLATE  
30. 242-6913 [2] RETAINER-BALL  
31. 289-8172 [2] SWASHPLATE AS  
32. 206-9291 [2] SEAL-O-RING  
33. 311-9548 [4] PLUG  
34. 247-8725 [2] PLATE  
35. 095-0882 [4] PIN-SPRING  
36. 247-8786 [2] DOWEL  
37. 347-6530 [9] SEAL-RECTANGULAR  
38. 295-9695 [1] SEAL-LIP TYPE  
39. 095-0944 [1] RING-RETAINING  
40. 249-6657 [1] SEAL-O-RING  
41. 289-8174 [1] GEAR-DRIVE  
42. 289-8175 [1] GEAR-DRIVEN  
43. 6V-5204 [1] RING-RETAINING  
44. 247-8718 [1] SPACER (44.5X68X3-MM THK)  
45. 289-8173 [1] FLANGE  
46. 8T-0343 M [11] BOLT-SOCKET HEAD (M12X1.75X55-MM)  
47. 8T-4241 [3] RING-RETAINING (EXTERNAL)  
48. 247-8787 [2] RING-RETAINING  
49. 247-8719 [3] SPACER (50X64X3-MM THK)  
50. 497-8508 [1] BODY AS  
  371-7201 [7] PLUG  
51. 295-9658 [1] BARREL AS  
52. 259-0832 [1] SHAFT-DRIVEN  
53. 247-8715 [2] BEARING-NEEDLE  
54. 497-8509 [1] BLOCK  
55. 295-9657 [1] BARREL AS  
56. 249-1307 M [2] BOLT-SOCKET HEAD (M22X2.5X95-MM)  
57. 247-8713 [2] BEARING-ROLLER  
58. 8T-9080 M [8] BOLT-SOCKET HEAD (M12X1.75X20-MM)  
59. 295-9512 [1] COVER  
60. 249-6670 [1] SEAL-O-RING  
61. 247-8720 [2] SPACER (95X110X3.2-MM THK)  
62. 247-8717 [2] SPACER (65X90X1-MM THK)  
63. 095-0929 [2] RING-RETAINING  
64. 247-8726 [1] COVER  
65. 259-0831 [1] SHAFT-DRIVE  
66. 196-3784 [8] PLUG  
67. 206-9290 [8] SEAL-O-RING  
68. 170-9997 [2] PLUG  
69. 206-9292 [2] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44890672
 

233-2530: ROTATING GP-MOTOR

233-2530 ROTATING GP-MOTOR -HYDRAULIC FAN
S/N C5K1-UP; LEM1-UP
PART OF 234-4638, 242-6776 MOTOR GP-PISTON
ALSO AN ATTACHMENT
i01915159 SEBP4489
2332530 ROTATING GP-MOTOR Parts scheme
  For full view, you need register

Parts for your 330D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 259-5501 [9] PISTON AS (ROTATING)  
2. 233-4885 [1] BARREL  
3. 233-2535 [1] PLATE (VALVE)  
4. 259-5503 [1] PLATE  
5. 295-9540 [1] RETAINER-BALL  
6. 233-5125 [1] SPRING  
7. 194-9479 [3] PIN  
8. 194-9480 [1] RING-RETAINING  
9. 194-9481 [1] DISC-THRUST  
 

#SEBP44890673
 

155-9111: ROTATING GP-PUMP

155-9111 ROTATING GP-PUMP -HYDRAULIC FAN
S/N C5K1-UP; LEM1-UP
PART OF 155-9107 MOTOR GP-PISTON
AN ATTACHMENT
i00854886 SEBP4489
1559111 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 330D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-9114 [1] PLATE  
2. 155-9149 [1] RING-RETAINING  
3. 155-9113 [1] BARREL  
4. 155-9117 [1] SPRING  
5. 155-9119 [1] PLATE  
6. 155-9118 [3] PIN  
7. 155-9112 [9] PISTON AS  
8. 155-9115 [1] PLATE  
9. 155-9116 [1] GUIDE-BALL  
 

#SEBP44890674
 

266-7833: ROTATING GP-PUMP

266-7833 ROTATING GP-PUMP
S/N C5K1-UP; LEM1-UP
PART OF 259-0815 PUMP GP-PISTON
i02461326 SEBP4489
2667833 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 330D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-9137 [1] PLATE  
2. 194-9480 [1] RING-RETAINING  
3. 266-7836 [1] BARREL  
4. 155-9117 [1] SPRING  
5. 194-9481 [1] DISC-THRUST  
6. 194-9479 [3] PIN  
7. 233-4880 [9] PISTON AS  
8. 266-7837 [1] PLATE  
9. 266-7838 [1] GUIDE  
 

#SEBP44890675
 

259-0922: SCREEN GP-HYDRAULIC

259-0922 SCREEN GP-HYDRAULIC -TANK
S/N C5K1-UP; LEM1-UP
PART OF 266-6562, 289-5565 TANK GP-HYDRAULIC
ALSO AN ATTACHMENT
i02346867 SEBP4489
2590922 SCREEN GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 330D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 259-0918 [1] GUIDE  
2. 095-6639 [1] SPRING  
3. 8T-4133 M [2] NUT (M10X1.5-THD)  
4. 129-7784 [1] ROD  
5. 209-6000 [1] SCREEN AS (HYDRAULIC TANK)  
6. 5H-5672 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP44890676
 

234-4440: SWIVEL GP

234-4440 SWIVEL GP
S/N C5K1-UP; LEM1-UP
PART OF 272-4402 LINES GP-TRAVEL MOTOR
i02459119 SEBP4489
2344440 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 330D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-7131 [1] RETAINER  
2. 7Y-4817 [1] COVER  
3. 159-7782 [5] SEAL  
4. 225-4548 [1] HOUSING  
5. 225-4549 [1] ROTOR  
6. 095-1625 [3] SEAL-O-RING  
7. 095-1716 [1] SEAL-O-RING  
8. 453-3454 [2] WASHER-HARD (11X21X2.5-MM THK)  
9. 455-3798 M [6] BOLT (M10X1.5X25-MM)  
10. 8T-6759 [1] PLUG-PIPE  
  M   METRIC PART
 

#SEBP44890677
 

239-1611: TANK & FILTER GP-HYDRAULIC

239-1611 TANK & FILTER GP-HYDRAULIC
S/N C5K1-222; LEM1-193
310-L (82-US GAL)
PART OF 239-1610 TANK & MTG GP-HYDRAULIC
i02461198 SEBP4489
2391611 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 330D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 188-2084 Y [1] FILTER & VALVE GP-PILOT (HYDRAULIC OIL)  
2. 204-8450 [1] SUPPORT AS  
3. 266-6562 Y [1] TANK GP-HYDRAULIC  
4. 282-7126 [1] SUPPORT AS  
5. 112-0065 [1] BRACKET  
6. 126-2075 Y [1] FILTER GP-OIL (HYDRAULIC, CASE DRAIN)  
7. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  3J-1907 [1] SEAL-O-RING  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
8. 164-5590 [1] VALVE AS-FLUID SAMPLING (PILOT OIL)  
  3J-7354 [1] SEAL-O-RING  
  8C-3446 [1] VALVE-SAMPLING  
9. 188-4140 Y [1] FILTER GP-OIL (HYDRAULIC RETURN)  
10. 2M-0849 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
11. 6J-2680 [1] SEAL-O-RING  
12. 6V-0852 [1] CAP-DUST  
13. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
14. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
16. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
17. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
18. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
19. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
22. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44890678
 

239-1611: TANK & FILTER GP-HYDRAULIC

239-1611 TANK & FILTER GP-HYDRAULIC
S/N LEM194-195
310-L (82-US GAL)
PART OF 239-1610 TANK & MTG GP-HYDRAULIC
i02684118 SEBP4489
2391611 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 330D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-8450 [1] SUPPORT AS  
2. 282-7126 [1] SUPPORT AS  
3. 289-5565 Y [1] TANK GP-HYDRAULIC  
4. 112-0065 [1] BRACKET  
5. 126-2075 Y [1] FILTER GP-OIL (HYDRAULIC, CASE DRAIN)  
6. 158-8987 Y [1] FILTER & VALVE GP-PILOT (HYDRAULIC OIL)  
7. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  3J-1907 [1] SEAL-O-RING  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
8. 164-5590 [1] VALVE AS-FLUID SAMPLING (PILOT OIL)  
  3J-7354 [1] SEAL-O-RING  
  8C-3446 [1] VALVE-SAMPLING  
9. 188-4140 Y [1] FILTER GP-OIL (HYDRAULIC RETURN)  
10. 2M-0849 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
11. 6J-2680 [1] SEAL-O-RING  
12. 6V-0852 [1] CAP-DUST  
13. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
14. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
16. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
17. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
18. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
19. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
22. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44890679
 

239-1611: TANK & FILTER GP-HYDRAULIC

239-1611 TANK & FILTER GP-HYDRAULIC
S/N C5K223-228; LEM196-260
310-L (82-US GAL)
PART OF 239-1610 TANK & MTG GP-HYDRAULIC
i02712096 SEBP4489
2391611 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 330D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 292-7299 C [1] SUPPORT AS  
2. 282-7126 [1] SUPPORT AS  
3. 289-5565 Y [1] TANK GP-HYDRAULIC  
4. 275-1362 [1] BRACKET  
5. 289-8194 CY [1] FILTER GP-OIL (HYDRAULIC, CASE DRAIN)  
6. 158-8987 Y [1] FILTER & VALVE GP-PILOT (HYDRAULIC OIL)  
7. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  3J-1907 [1] SEAL-O-RING  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
8. 164-5590 [1] VALVE AS-FLUID SAMPLING (PILOT OIL)  
  3J-7354 [1] SEAL-O-RING  
  8C-3446 [1] VALVE-SAMPLING  
9. 188-4140 Y [1] FILTER GP-OIL (HYDRAULIC RETURN)  
10. 8T-7971 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
11. 6J-2680 [1] SEAL-O-RING  
12. 6V-0852 [1] CAP-DUST  
13. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
14. 8T-4121 C [7] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4136 CM [3] BOLT (M10X1.5X25-MM)  
16. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
17. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
18. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
19. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
22. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-6916 GASKET OF THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D LN OEM, 330D MH, 330D MH FCR, 330D MH HCR, 330D OEM, 345C, 345C L, 345C MH FCR, 345C MH HCR, AND 345C OEM EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-6916 GASKET OF THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D LN OEM, 330D MH, 330D MH FCR, 330D MH HCR, 330D OEM, 345C, 345C L, 345C MH FCR, 345C MH HCR, AND 345C OEM EXCAVATORS
PRODUCT SUPPORT PROGRAM TO REPLACE THE MAIN HYDRAULIC PUMP COUPLING ON CERTAIN 336D EXCAVATORS
PRODUCT SUPPORT PROGRAM TO REPLACE THE MAIN HYDRAULIC PUMP COUPLING ON CERTAIN 336D EXCAVATORS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-6916 GASKET OF THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D LN OEM, 330D MH, 330D MH FCR, 330D MH HCR, 330D OEM, 345C, 345C L, 345C MH FCR, 345C MH HCR, AND 345C OEM EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-6916 GASKET OF THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D LN OEM, 330D MH, 330D MH FCR, 330D MH HCR, 330D OEM, 345C, 345C L, 345C MH FCR, 345C MH HCR, AND 345C OEM EXCAVATORS
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
PRODUCT SUPPORT PROGRAM TO REPLACE THE MAIN HYDRAULIC PUMP COUPLING ON CERTAIN 336D EXCAVATORS
PRODUCT SUPPORT PROGRAM TO REPLACE THE MAIN HYDRAULIC PUMP COUPLING ON CERTAIN 336D EXCAVATORS
Technical Information Bulletin
Sound Characteristics of the Main Hydraulic Pump on Certain Excavators{5070}
Sound Characteristics of the Main Hydraulic Pump on Certain Excavators{5070}
Wear on Swash Plate Support in Side By Side Pumps on Certain Excavators{5070}
Wear on Swash Plate Support in Side By Side Pumps on Certain Excavators{5070}
Specifications
Fan Drive Pump
330D and 336D Excavators Machine System Specifications
Gear Pump
330D and 336D Excavators Machine System Specifications
Main Hydraulic Pump
330D and 336D Excavators Machine System Specifications
Fan Drive Pump
330D and 336D Excavators Machine System Specifications
Gear Pump
330D and 336D Excavators Machine System Specifications
Main Hydraulic Pump
330D and 336D Excavators Machine System Specifications
Main Hydraulic Pump
330D and 336D Excavators Machine System Specifications
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-6916 GASKET OF THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D LN OEM, 330D MH, 330D MH FCR, 330D MH HCR, 330D OEM, 345C, 345C L, 345C MH FCR, 345C MH HCR, AND 345C OEM EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-6916 GASKET OF THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D LN OEM, 330D MH, 330D MH FCR, 330D MH HCR, 330D OEM, 345C, 345C L, 345C MH FCR, 345C MH HCR, AND 345C OEM EXCAVATORS
Service Letter-Asia
Systems Operation
Pump Control (Main Hydraulic) - Main Pump Regulator
330D Material Handler Hydraulic System
Gear Pump (Pilot)
330D Material Handler Hydraulic System
Main Hydraulic Pump
330D Material Handler Hydraulic System
Solenoid Valve (Proportional Reducing) - Power Shift System
330D Material Handler Hydraulic System
Negative Flow Control System
330D Material Handler Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Information Release Memo
CAT REMAN EXPANDS HYD GEAR & PISTON PUMP & MOTOR OPTIONS
CAT REMAN EXPANDS HYD GEAR & PISTON PUMP & MOTOR OPTIONS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-6916 GASKET OF THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D LN OEM, 330D MH, 330D MH FCR, 330D MH HCR, 330D OEM, 345C, 345C L, 345C MH FCR, 345C MH HCR, AND 345C OEM EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-6916 GASKET OF THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D LN OEM, 330D MH, 330D MH FCR, 330D MH HCR, 330D OEM, 345C, 345C L, 345C MH FCR, 345C MH HCR, AND 345C OEM EXCAVATORS
Testing and Adjusting
Main Hydraulic Pump Air - Purge
330D Material Handler Hydraulic System
Main Pump (Flow) - Test - Constant Horsepower Flow Control for Stage 1 Pump
330D Material Handler Hydraulic System
Pump Control (Output Flow) - Adjust
330D Material Handler Hydraulic System
Pump Control (Negative Flow) - Test - Stage 1 Pump
330D Material Handler Hydraulic System
Pump Control (Negative Flow) - Adjust - Stage 1 Pump
330D Material Handler Hydraulic System
Gear Pump (Pilot) - Test
330D Material Handler Hydraulic System
Swing Speed and Overswing on Level Ground - Check
330D Material Handler Hydraulic System
Swing Speed and Swing Drift on a Slope - Check
330D Material Handler Hydraulic System
Main Pump (Flow) - Test - Constant Horsepower Flow Control for Stage 2 Pump
330D Material Handler Hydraulic System
Pump Control (Negative Flow) - Test - Stage 2 pump
330D Material Handler Hydraulic System
Pump Control (Negative Flow) - Adjust
330D Material Handler Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Disassembly and Assembly
Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove
330D Material Handler C9 Engine Supplement
Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Install
330D Material Handler C9 Engine Supplement
Piston Pump (Hydraulic Fan) - Disassemble
330D Excavator Machine Systems
Piston Pump (Hydraulic Fan) - Assemble
330D Excavator Machine Systems
Gear Pump (Auxiliary) - Disassemble
330D Excavator Machine Systems
Gear Pump (Auxiliary) - Assemble
330D Excavator Machine Systems
Engine and Main Hydraulic Pump - Remove
330D Material Handler C9 Engine Supplement
Engine and Main Hydraulic Pump - Install
330D Material Handler C9 Engine Supplement
Main Hydraulic Pump - Remove
330D Excavator Machine Systems
Main Hydraulic Pump - Install
330D Excavator Machine Systems
Gear Pump (Pilot) - Remove
330D Excavator Machine Systems
Gear Pump (Pilot) - Install
330D Excavator Machine Systems
Piston Pump (Hydraulic Fan) - Remove
330D Excavator Machine Systems
Piston Pump (Hydraulic Fan) - Install
330D Excavator Machine Systems
Gear Pump (Auxiliary) - Disassemble
330D Excavator Machine Systems
Gear Pump (Auxiliary) - Assemble
330D Excavator Machine Systems
Main Hydraulic Pump - Disassemble
330D Excavator Machine Systems
Main Hydraulic Pump - Assemble
330D Excavator Machine Systems
Gear Pump (Auxiliary) - Remove
330D Excavator Machine Systems
Gear Pump (Auxiliary) - Install
330D Excavator Machine Systems
Service Magazine
Preventing Oil Leaks from the Pressure Sensors on the Main Hydraulic Pump {5057, 5070}
2007/04/02
Correction to Testing and Adjusting , "Main Pump (Flow) - Test" {5070}
2007/08/06
New Seals in the Main Hydraulic Pump Prevent Oil Leaks from the Pump Shaft {5070, 7555}
2008/03/03
A New Main Hydraulic Pump Is Available for Certain 330D Excavators {5057, 5059, 5070, 7610, 7620}
A New Main Hydraulic Pump Is Available for Certain 330D Excavators {5057, 5059, 5070, 7610, 7620}
New Parts are Used To Stabilize the Hydraulic Pressure on 330D Excavators and Mobile Hydraulic Power Units {5069, 5070, 5117}
2011/01/20
New Plugs Are Now Used for the Main Pump Flange on Certain Excavators and Mobile Hydraulic Power Unit {5070}
2011/02/21
Key Differences Between Similar Double Piston Pump Offerings for Certain Excavators, Forest Machines, and Mobile Hydraulic Power Units {5070}
Key Differences Between Similar Double Piston Pump Offerings for Certain Excavators, Forest Machines, and Mobile Hydraulic Power Units {5070}

Caterpillar Parts SIS Catalog 330D MH :

PUMP GP-PISTON
295-9655 PUMP GP-PISTON
PUMP GP-PISTON
283-6116 PUMP GP-PISTON
PUMP GP-PISTON
266-7954 PUMP GP-PISTON
PUMP GP-PISTON
259-0815 PUMP GP-PISTON
PUMP GP-PISTON
259-0815 PUMP GP-PISTON
PUMP GP-MAIN HYDRAULIC
322-8733 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
295-9674 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
295-9674 PUMP GP-MAIN HYDRAULIC
PUMP GP-PISTON & GEAR
497-8499 PUMP GP-PISTON & GEAR
ROTATING GP-MOTOR
233-2530 ROTATING GP-MOTOR
ROTATING GP-PUMP
155-9111 ROTATING GP-PUMP
ROTATING GP-PUMP
266-7833 ROTATING GP-PUMP
SCREEN GP-HYDRAULIC
259-0922 SCREEN GP-HYDRAULIC
SWIVEL GP
234-4440 SWIVEL GP
TANK & FILTER GP-HYDRAULIC
239-1611 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
239-1611 TANK & FILTER GP-HYDRAULIC

Truck sale:

CATERPILLAR 330DMH 2012
 
CATERPILLAR 330DMH 2012
- TRACK EXCAVATORS
HOLT CAT
CATERPILLAR 330DMH 2012
 
CATERPILLAR 330DMH 2012
- TRACK EXCAVATORS
HOLT CAT
 
USD $70,242 
2013 CAT 330D MH

TRAZZI MACCHINE SRL
Goito, MANTOVA, Italy
2009 CAT 330D MH
USD $129,900 
2009 CAT 330D MH

TRACEY ROAD EQUIPMENT INC
East Syracuse, New York
CATERPILLAR 330D MH 2009
$129,904 USD 
CATERPILLAR 330D MH 2009
- TRACK EXCAVATORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.