AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-5106 STARTING MOTOR GP-AIR PART OF 308-1857 STARTING MOTOR GP-AIR FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@, @@@@@ 4W-5107@@@@@ AN ATTACHMENT C27


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP

INDUSTRIAL ENGINE C27 INDUSTRIAL ENGINE TWM
 C27 Industrial Engine TWM00001-UP SEBP4496 C27 TWM   (2005)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
STARTING MOTOR GP-AIR
308-1858 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
4W-5105 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
4W-5106 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
4W-5107 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-3372 STARTING MOTOR GP-AIR
STARTING MOTOR GP-ELECTRIC
207-1549 STARTING MOTOR GP-ELECTRIC
 

#SEBP44960780
 

4W-5106: STARTING MOTOR GP-AIR

4W-5106 STARTING MOTOR GP-AIR
PART OF 308-1857 STARTING MOTOR GP-AIR
FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@, @@@@@ 4W-5107@@@@@
AN ATTACHMENT
i00379550 SEBP4496
4W5106 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3937 M [1] BOLT (M5X0.8X20-MM)  
  5N-8378 [1] NUT-ROTOR CLAMP (M5X0.8-THD)  
2. 5N-8363 [1] COVER AS  
3. 4D-3118 [3] PLUG-PIPE  
4. 5N-8383 [1] CYLINDER  
5. 6V-3916 [1] BALL BEARING  
  1L-8497 [1] RING-SNAP (SMALL)  
  6J-7855 [1] RING-RETAINING (LARGE)  
6. 5N-8375 [1] CUP-SPRING  
  6V-3935 [1] RING-RETAINING  
7. 5N-8381 [1] SPRING-CLUTCH  
8. 2W-6081 [1] GEAR AS-DRIVE (37-TEETH)  
9. 5N-9574 [1] JAW AS-CLUTCH  
10. 5N-8387 [1] CASE-GEAR  
11. 5N-8424 [1] BULKHEAD  
12. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
  3B-4505 [8] LOCKWASHER  
13. 3J-7719 [1] RING-RETAINING (INNER)(INNER)  
  6V-3971 [1] RING-RETAINING (OUTER)  
14. 7F-8671 [1] BALL BEARING  
15. 5N-8428 [1] WASHER-GEAR (10.1X34X15.5-MM THK)  
16. 5N-8427 M [4] BOLT-MOTOR (M10X1.5X180-MM)  
17. 6V-3959 [5] LOCKWASHER  
18. 5N-8403 M [1] SCREW-PINION (M12X1.25X70-MM)  
  5N-8425 [1] WASHER (12.2X41.5X4.5-MM THK)  
19. 2W-6078 [1] PINION-DRIVE (12-TEETH)  
20. 5N-8380 [1] SPRING-PINION  
  5N-8374 [1] SLEEVE-SPRING  
21. 2W-6082 [1] KIT-DRIVE (AIR STARTING MOTOR)  
    (INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT)
22. 8B-7624 [1] BALL BEARING  
23. 5N-8379 [1] SEAT-SPRING  
24. 5N-8372 [1] SPRING-RETURN  
25. 5N-8384 [1] SHAFT-DRIVE  
26. 6V-3938 M [1] BOLT (M10X1.5X20-MM)  
27. 5P-9514 [1] BALL BEARING  
28. 5N-8377 [1] BEARING-DRIVE SHAFT  
29. 5N-8373 [1] PISTON  
30. 6V-3939 M [1] BOLT (M12X1.75X60-MM)  
31. 5N-8368 [1] PINION-ROTOR (17-TEETH)  
32. 6V-1394 [1] BALL BEARING  
  039-4317 [2] WASHER-SPRING  
33. 5N-8365 [1] PLATE-FRONT END  
34. 5N-8364 [1] HOUSING-MOTOR  
35. 5N-8388 [1] ROTOR  
36. 5N-8367 [1] PLATE-REAR END  
   
    AVAILABLE REPAIR KIT(S):
  5N-8390 [1] KIT-SEAL & VANE (AIR STARTING MOTOR)  
    (INCLUDES PINS & RINGS)
  M   METRIC PART
 

#SEBP44960781
 

4W-5107: STARTING MOTOR GP-AIR

4W-5107 STARTING MOTOR GP-AIR
FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@
FIELD REPLACEMENT FOR @@@@@ 4W-5105@@@@@, @@@@@ 4W-5106@@@@@
i00109293 SEBP4496
4W5107 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6078 [1] PINION-DRIVE (12-TEETH)  
2. 2W-6082 [1] KIT-DRIVE (AIR STARTING MOTOR)  
    (INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT)
3. 3B-4505 [8] LOCKWASHER  
4. 5N-8363 [1] COVER AS  
  4D-3118 [3] PLUG-PIPE  
5. 5N-8364 [1] HOUSING-MOTOR  
6. 5N-8384 [1] SHAFT-DRIVE  
7. 5N-8387 [1] CASE-GEAR  
8. 5N-8403 M [1] SCREW-PINION (M12X1.25X70-MM)  
9. 5N-8425 [1] WASHER (12.2X41.5X4.5-MM THK)  
10. 6V-3959 [5] LOCKWASHER  
11. 5N-8427 M [4] BOLT-MOTOR (M10X1.5X180-MM)  
12. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
13. 1L-8497 [1] RING-SNAP (SMALL)  
14. 2W-6081 [1] GEAR AS-DRIVE (37-TEETH)  
15. 3J-7719 [1] RING-RETAINING (INNER)  
16. 5N-8365 [1] PLATE-FRONT END  
17. 5N-8367 [1] PLATE-REAR END  
18. 5N-8368 [1] PINION-ROTOR (17-TEETH)  
19. 5N-8372 [1] SPRING-RETURN  
20. 5N-8373 [1] PISTON  
21. 5N-8374 [1] SLEEVE-SPRING  
22. 5N-8375 [1] CUP-SPRING  
23. 5N-8377 [1] BEARING-DRIVE SHAFT  
24. 5N-8378 [1] NUT-ROTOR CLAMP (M5X0.8-THD)  
25. 5N-8379 [1] SEAT-SPRING  
26. 5N-8380 [1] SPRING-PINION  
27. 5N-8381 [1] SPRING-CLUTCH  
28. 5N-8383 [1] CYLINDER  
29. 5N-8388 [1] ROTOR  
30. 5N-8424 [1] BULKHEAD  
31. 5N-8428 [1] WASHER-GEAR (10.1X34X15.5-MM THK)  
32. 5N-9574 [1] JAW AS-CLUTCH  
33. 5P-9514 [1] BALL BEARING  
34. 6J-7855 [1] RING-RETAINING (LARGE)  
35. 6V-1394 [1] BALL BEARING  
36. 6V-3916 [1] BALL BEARING  
37. 6V-3935 [1] RING-RETAINING  
38. 096-4833 M [1] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
39. 6V-3938 M [1] BOLT (M10X1.5X20-MM)  
40. 6V-3939 M [1] BOLT (M12X1.75X60-MM)  
41. 6V-3971 [1] RING-RETAINING (OUTER)  
42. 7F-8671 [1] BALL BEARING  
43. 8B-7624 [1] BALL BEARING  
44. 039-4317 [2] WASHER-SPRING  
   
    AVAILABLE REPAIR KIT(S):
  5N-8390 [1] KIT-SEAL & VANE (AIR STARTING MOTOR)  
    (INCLUDES PINS, RINGS, SEALS & VANE)
  M   METRIC PART
 

#SEBP44960782
 

7C-3372: STARTING MOTOR GP-AIR

7C-3372 STARTING MOTOR GP-AIR
FIELD REPLACEMENT FOR @@@@@ 4W-5106@@@@@, @@@@@ 4W-5105@@@@@, @@@@@ 4W-5107@@@@@
i00091625 SEBP4496
7C3372 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 096-4833 M [1] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
2. 5N-8363 [1] COVER AS  
2A. 4D-3118 [3] PLUG-PIPE  
3. 039-4317 [2] WASHER-SPRING  
4. 5N-8383 [1] CYLINDER  
5. 6V-3916 [1] BALL BEARING  
6. 5N-8375 [1] CUP-SPRING  
7. 5N-8381 [1] SPRING-CLUTCH  
8. 2W-6081 [1] GEAR AS-DRIVE (37-TEETH)  
9. 5N-9574 [1] JAW AS-CLUTCH  
10. 5N-8387 [1] CASE-GEAR  
11. 5N-8424 [1] BULKHEAD  
12. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
13. 3J-7719 [1] RING-RETAINING (INNER)  
14. 7F-8671 [1] BALL BEARING  
15. 5N-8428 [1] WASHER-GEAR (10.1X34X15.5-MM THK)  
16. 5N-8427 M [4] BOLT-MOTOR (M10X1.5X180-MM)  
17. 7X-0796 [5] LOCKWASHER (10.2X18.4X2.5-MM THK)  
18. 5N-8403 M [1] SCREW-PINION (M12X1.25X70-MM)  
19. 2W-6078 [1] PINION-DRIVE (12-TEETH)  
20. 5N-8380 [1] SPRING-PINION  
21. 2W-6082 [1] KIT-DRIVE (AIR STARTING MOTOR)  
    (INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT)
22. 8B-7624 [1] BALL BEARING  
23. 5N-8379 [1] SEAT-SPRING  
24. 5N-8372 [1] SPRING-RETURN  
25. 5N-8384 [1] SHAFT-DRIVE  
26. 6V-3938 M [1] BOLT (M10X1.5X20-MM)  
27. 5P-9514 [1] BALL BEARING  
28. 5N-8377 [1] BEARING-DRIVE SHAFT  
29. 5N-8373 [1] PISTON  
30. 6V-3939 M [1] BOLT (M12X1.75X60-MM)  
31. 5N-8368 [1] PINION-ROTOR (17-TEETH)  
32. 6V-1394 [1] BALL BEARING  
33. 5N-8365 [1] PLATE-FRONT END  
34. 111-4399 [1] HOUSING-MOTOR  
35. 5N-8388 [1] ROTOR  
36. 5N-8367 [1] PLATE-REAR END  
37. 5N-8378 [1] NUT-ROTOR CLAMP (M5X0.8-THD)  
38. 1L-8497 [1] RING-SNAP  
39. 6J-7855 [1] RING-RETAINING  
40. 6V-3935 [1] RING-RETAINING  
41. 3B-4505 [8] LOCKWASHER  
42. 5N-8425 [1] WASHER (12.2X41.5X4.5-MM THK)  
43. 6V-3971 [1] RING-RETAINING (OUTER)  
44. 5N-8374 [1] SLEEVE-SPRING  
   
    AVAILABLE REPAIR KIT(S):
  5N-8390 [1] KIT-SEAL & VANE (AIR STARTING MOTOR)  
    (INCLUDES PINS, O-RINGS, SEALS, VANE, RETAINER & PISTON BUMPERS)
  M   METRIC PART
 

#SEBP44960783
 

207-1549: STARTING MOTOR GP-ELECTRIC

207-1549 STARTING MOTOR GP-ELECTRIC
24-VOLT. 42MT SEMI-SOLID LINK
PART OF 285-5320, 6N-4515 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
AN ATTACHMENT
i01615155 SEBP4496
2071549 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH (STARTING MOTOR)  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 7T-3271 [1] CONNECTOR  
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3F-0379 [8] SCREW-POLE SHOE (3/8-24-THD)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 3E-7775 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 036-9823 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 193-8570 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
26. 6V-8378 [2] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
29. Z [1] HOUSING  
30. JZ [4] SPRING  
31. JZ [4] BRUSH  
32. JZ [4] SCREW  
33. JPZ [6] SCREW AS  
34. JPZ [1] SEAL-0-RING  
35. LZ [3] INSULATOR  
36. NZ [1] LEVER AS  
37. NPZ [1] NUT  
38. NPZ [1] SEAL-O-RING  
39. PZ [1] SEAL-O-RING  
40. NZ [1] RETAINER  
41. PZ [1] GASKET  
42. PZ [1] BUSHING  
43. PZ [2] PLUG-CUP  
44. PZ [1] PLUG-CUP  
45. PZ [1] PLUG  
46. PZ [1] PLUG  
47. PZ [1] PLUG  
48. PZ [1] BUSHING  
49. PZ [1] WASHER  
50. NZ [1] SEAL-O-RING  
51. NZ [1] SEAL-O-RING  
52. PZ [1] RETAINER  
53. PZ [1] SPACER  
54. PZ [1] BUSHING  
55. LZ [1] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  8C-3655 J [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES SEAL, BRUSHES, SPRINGS, & SCREWS)
  7T-3267 P [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, SEALS, GASKET, CUP, WICKS, & SPACER)
  7T-3268 N [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER ASSEMBLIES, SEALS, GASKET, NUT, & RETAINER)
  8T-9884 L [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  L   KIT MARKED L INCLUDES PART(S) MARKED L
  N   KITS MARKED N INCLUDES PARTS MARKED N
  P   KITS MARKED P INCLUDES PARTS MARKED P
  Z   NOT SERVICED SEPARATELY
 

#SEBP44960784
 

207-1549: STARTING MOTOR GP-ELECTRIC

207-1549 STARTING MOTOR GP-ELECTRIC
24-VOLT. 42MT SEMI-SOLID LINK
PART OF 285-5320, 6N-4515 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
ALSO AN ATTACHMENT
i04623492 SEBP4496
2071549 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH (STARTING MOTOR)  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER ASSEMBLIES, SEALS, NUT, GASKET & RETAINER)
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATOR TERMINALS & GROMMET)
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 3E-7775 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 0S-1597 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 548-9596 [1] KIT-SOLENOID (24-VOLT)  
    (INCLUDES NUTS, BOLTS, CONNECTORS & INSTRUCTION SHEET)
26. 6V-8378 [2] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
29. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
30. 8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES BRUSHES, SPRINGS, SCREWS, SEAL & SCREW ASSEMBLIES)
31. 7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, WASHERS, SPACER, NUT, & SCREW ASSEMBLIES)
 

#SEBP44960785
 

207-1556: STARTING MOTOR GP-ELECTRIC

207-1556 STARTING MOTOR GP-ELECTRIC
24-VOLT
OPTIONAL FIELD REPLACEMENT ORDER @@@@@237-1962@@@@@
FIELD REPLACEMENT FOR @@@@@207-1564@@@@@, @@@@@207-1549@@@@@
i01592733 SEBP4496
2071556 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 283-1107 [1] KIT-CONNECTOR (STARTING MOTOR)  
    (INCLUDES CONNECTORS, BOLT & TERMINAL-STARTER)
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & GROMMET)
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 3E-7775 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 0S-1597 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 548-9596 [1] KIT-SOLENOID (24-VOLT)(INSULATED)  
    (INCLUDES BOLT, NUTS, & CONNECTORS)
26. 6V-8378 [3] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
29. 9X-4824 [1] COVER-STARTING MOTOR  
30. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
31. 8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES BRUSHES, SPRINGS, SCREWS, SCREW ASSEMBLIES & SEAL)
32. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER ASSEMBLIES, SEAL, NUT, GASKET & RETAINER)
   
    AVAILABLE REPAIR KIT(S):
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW AS, WASHERS, SPACER & NUT)
 

#SEBP44960786
 

207-1564: STARTING MOTOR GP-ELECTRIC

207-1564 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 285-5320, 6N-4515 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
ALSO AN ATTACHMENT
i01573992 SEBP4496
2071564 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS (STARTING MOTOR)  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH (STARTING MOTOR)  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 283-1107 [1] KIT-CONNECTOR (STARTING MOTOR)  
  3E-7853 [1] TERMINAL  
  5S-7349 [1] BOLT (1/4-20X0.5-IN)  
  278-0592 [1] CONNECTOR  
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES TERMINAL INSULATORS & GROMMET)
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 7T-3973 [1] HOUSING AS-LEVER  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 0S-1597 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 548-9596 [1] KIT-SOLENOID (24-VOLT)  
    (KIT INCLUDES NUTS, CONNECTORS, AND BOLT)
26. 6V-8378 [2] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
29. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
30. 8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES SEAL, BRUSHES, SPRINGS, SCREWS & SCREW ASSEMBLIES)
31. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES NUT, GASKET, RETAINER, SEALS & LEVER ASSEMBLIES)
   
    AVAILABLE REPAIR KIT(S):
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, WICKS, CUP, SEALS, GASKET, SCREWS, WASHERS & NUT)
 

#SEBP44960787
 

237-1962: STARTING MOTOR GP-ELECTRIC

237-1962 STARTING MOTOR GP-ELECTRIC
S/N TWM1807-UP
24-VOLT
PART OF 358-4855, 4N-1061 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@338-3454@@@@@
FIELD REPLACEMENT FOR @@@@@ 6V-0885@@@@@, @@@@@207-1556@@@@@, @@@@@ 6V-0590@@@@@
ALSO AN ATTACHMENT
i01972316 SEBP4496
2371962 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
8A. 6T-0371 [1] INSULATOR  
8B. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
  9F-5599 [12] LOCKWASHER  
8C. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
8D. 6T-0372 [1] PLATE  
8E. 3T-4709 [3] PLATE  
8F. 2L-6679 [3] PLATE-INSULATOR  
8G. 3T-4710 [3] PLATE  
8H. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
8J. 3T-9494 [1] SPRING  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS (STARTING MOTOR)  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 306-3998 [1] BOOT-RUBBER  
19. 9M-7609 [1] SPRING (SHIFT LEVER)  
20. 4M-1827 [1] RETAINER-SPRING  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 0S-1597 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
45. 125-6537 [1] INSULATOR  
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [6] NUT (10-32-THD)  
51. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
52. 3T-9494 [6] SPRING (STARTING MOTOR)  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
54. 9G-4101 [1] BUSHING-END  
55. 3T-3424 [3] PLUG-FELT  
56. 3T-3423 [3] CUP  
57. 1M-9968 [1] BUSHING  
58. 2F-6678 [1] SEAL-LIP TYPE  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
62. 125-6535 [1] COVER-STARTING MOTOR  
63. 7T-9123 [1] GASKET-PLATE  
64. 318-2082 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
65. 125-6536 [1] TERMINAL AS  
 

#SEBP44960788
 

285-5320: STARTING MOTOR GP-ELECTRIC

285-5320 STARTING MOTOR GP-ELECTRIC
24-VOLT
ALSO AN ATTACHMENT
i02510727 SEBP4496
2855320 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-7869 [2] GASKET  
2. 4P-9200 [1] BRACKET  
3. 482-8184 [1] PLATE AS  
  9F-6445 [4] NUT-WELD (1/4-20-THD)  
4. 4W-3595 [3] MOUNT  
5. 6N-7255 [1] CABLE AS  
  1S-7251 [2] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  159-8050 E CABLE (00-GA, BLACK)(145-CM)  
6. 9G-8909 [2] COVER-TERMINAL (BLACK)  
7. 101-9124 [1] CABLE AS  
  1S-7251 [2] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  159-8049 E CABLE (00-GA, RED)(140-CM)  
  8N-0869 [2] COVER-TERMINAL (RED)  
8. 207-1549 Y [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)(RH)  
9. 207-1564 Y [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)(LH)  
10. 354-3448 [1] CABLE AS-GROUND  
  159-8050 E CABLE (00-GA, BLACK)(29-CM)  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
11. 355-4676 [2] BRACKET AS  
    (EACH INCLUDES)
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
12. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
13. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
14. 2V-1771 [4] GROMMET  
15. 3E-0075 Y [2] SWITCH GP-MAGNETIC (24-VOLT)(STARTING MOTOR)  
16. 4B-2043 [3] NUT (8-32-THD)  
17. 4B-4863 [3] WASHER (4.7X11X1.2-MM THK)  
18. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 8D-9671 [2] CLIP  
20. 8S-0948 [2] CLIP  
21. 8S-2332 [6] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
22. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
23. 8T-9364 [4] BOLT (1/4-20X0.625-IN)  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP44960789
 

338-3454: STARTING MOTOR GP-ELECTRIC

338-3454 STARTING MOTOR GP-ELECTRIC
S/N TWM1807-UP
24-VOLT
PART OF 354-5795 KIT-ENGINE PARTS, 358-4855, 4N-1061 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT FOR @@@@@352-9767@@@@@, @@@@@ 6V-0590@@@@@, @@@@@ 6V-0885@@@@@, @@@@@237-1962@@@@@
ALSO AN ATTACHMENT
i03784531 SEBP4496
3383454 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 125-6535 [1] COVER-STARTING MOTOR  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 494-6475 [1] HOUSING AS-DRIVE  
25. 6N-3826 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
40. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
40A. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Cold Weather Starting
C27 and C32 Industrial Engines
Starting the Engine
C27 and C32 Industrial Engines
Starting Motor - Inspect - If Equipped
C27 and C32 Industrial Engines
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Disassembly and Assembly
Electric Starting Motor - Remove and Install
C27 and C32 Industrial Engines
Electric Starting Motor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog C27 :

STARTING MOTOR GP-AIR
4W-5105 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
308-1858 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
308-1857 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
143-7606 STARTING MOTOR GP-AIR
STARTING AID GP-ETHER
311-6466 STARTING AID GP-ETHER
STARTING AID GP-ETHER
311-6465 STARTING AID GP-ETHER
STARTING AID GP-ETHER
305-6363 STARTING AID GP-ETHER
STARTING AID GP-ETHER
305-6362 STARTING AID GP-ETHER
STARTING MOTOR GP-AIR
4W-5107 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-3372 STARTING MOTOR GP-AIR
STARTING MOTOR GP-ELECTRIC
207-1549 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1549 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1556 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1564 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
285-5320 STARTING MOTOR GP-ELECTRIC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.