AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

352-9767 STARTING MOTOR GP-ELECTRIC S/N TWM2468-UP 24-VOLT PART OF 5N-2685 STARTING MOTOR GP-ELECTRIC FIELD REPLACEMENT ORDER @@@@@338-3454@@@@@ FIELD REPLACEMENT FOR @@@@@ 6V-0885@@@@@ ALSO AN ATTACHMENT C27


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP

INDUSTRIAL ENGINE C27 INDUSTRIAL ENGINE TWM
 C27 Industrial Engine TWM00001-UP SEBP4496 C27 TWM   (2005)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
285-5320 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9767 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
358-4855 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
358-4855 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
4N-1061 STARTING MOTOR GP-ELECTRIC
 

#SEBP44960790
 

352-9767: STARTING MOTOR GP-ELECTRIC

352-9767 STARTING MOTOR GP-ELECTRIC
S/N TWM2468-UP
24-VOLT
PART OF 5N-2685 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@338-3454@@@@@
FIELD REPLACEMENT FOR @@@@@ 6V-0885@@@@@
ALSO AN ATTACHMENT
i03997313 SEBP4496
3529767 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 7T-3974 [1] HOUSING AS-DRIVE  
25. 6N-3826 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHER)
40. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
41. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
58. 125-6535 [1] COVER-STARTING MOTOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP44960791
 

358-4855: STARTING MOTOR GP-ELECTRIC

358-4855 STARTING MOTOR GP-ELECTRIC
Type 1
FOR USE WITH LH FLYWHEEL APPLICATIONS
CANNOT BE USED WITH ANY FIRE SUPPRESSION PANEL APPLICATION
AN ATTACHMENT
i04166511 SEBP4496
3584855 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-4337 [1] WIRE AS  
2. 9Y-6089 [1] GASKET  
3. 237-1962 Y [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
4. 176-2543 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP44960792
 

358-4855: STARTING MOTOR GP-ELECTRIC

358-4855 STARTING MOTOR GP-ELECTRIC
Type 2
FOR USE WITH LH FLYWHEEL APPLICATIONS
CANNOT BE USED WITH ANY FIRE SUPPRESSION PANEL APPLICATION
AN ATTACHMENT
i04167689 SEBP4496
3584855 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-4337 [1] WIRE AS  
2. 9Y-6089 [1] GASKET  
3. 338-3454 Y [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
4. 176-2543 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP44960793
 

4N-1061: STARTING MOTOR GP-ELECTRIC

4N-1061 STARTING MOTOR GP-ELECTRIC
S/N TWM1807-UP
24-VOLT
CANNOT BE USED WITH MARINE PROPULSION, MARINE AUXILIARY, OR MARINE GEN SET ENGINES (INSULATED WIRING SYSTEMS)
ALSO AN ATTACHMENT
i02013222 SEBP4496
4N1061 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
2. 4N-1059 [1] GASKET  
3. 237-1962 CY [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
4. 9F-4337 [1] WIRE AS  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP44960794
 

4N-1061: STARTING MOTOR GP-ELECTRIC

4N-1061 STARTING MOTOR GP-ELECTRIC
S/N TWM101-UP
24-VOLT
CANNOT BE USED WITH MARINE PROPULSION, MARINE AUXILIARY, OR MARINE GEN SET ENGINES (INSULATED WIRING SYSTEMS)
ALSO AN ATTACHMENT
i04181274 SEBP4496
4N1061 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
2. 9Y-6089 [1] GASKET  
3. 338-3454 CY [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
4. 9F-4337 [1] WIRE AS  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP44960795
 

5N-2685: STARTING MOTOR GP-ELECTRIC

5N-2685 STARTING MOTOR GP-ELECTRIC
S/N TWM1610-2467
24-VOLT. FOR USE ON RH SIDE OF ENGINE, SOLENOID MOUNTED UP
CANNOT BE USED WITH TRANSMISSION OIL COOLER
ALSO AN ATTACHMENT
i00384726 SEBP4496
5N2685 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0885 CY [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
2. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
  4D-3704 [3] WASHER-HARD (17X30X5-MM THK)  
3. 4N-1059 [3] GASKET  
4. 9F-4337 [1] WIRE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP44960796
 

5N-2685: STARTING MOTOR GP-ELECTRIC

5N-2685 STARTING MOTOR GP-ELECTRIC
S/N TWM2468-UP
24-VOLT. FOR USE ON RH SIDE OF ENGINE, SOLENOID MOUNTED UP
CANNOT BE USED WITH TRANSMISSION OIL COOLER
ALSO AN ATTACHMENT
i04511135 SEBP4496
5N2685 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 352-9767 CY [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
2. 176-2543 C [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
3. 9Y-6089 [3] GASKET  
4. 9F-4337 [1] WIRE AS  
5. 4D-3704 [3] WASHER-HARD (17X30X5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP44960797
 

6N-4515: STARTING MOTOR GP-ELECTRIC

6N-4515 STARTING MOTOR GP-ELECTRIC
24-VOLT
CANNOT BE USED WITH MARINE PROPULSION OR MARINE AUXILIARY GENSET ENGINES
AN ATTACHMENT
i01615287 SEBP4496
6N4515 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 207-1549 Y [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)(RH)  
2. 4H-7869 [2] GASKET  
3. 8S-2332 [6] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
4. 9F-4337 [1] WIRE AS  
5. 4P-9201 C [1] PLATE AS  
  9F-6445 C [1] NUT-WELD (1/4-20-THD)  
6. 4W-3595 C [3] MOUNT  
7. 1S-7251 [4] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
8. 5P-0747 E CABLE (00-GA, BLACK)(145-CM)  
9. 5K-8451 [2] CLIP (LOOP)  
10. 4L-9337 C [2] BOLT (3/8-16X1.5-IN)  
11. 8T-4896 C [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 4P-9200 C [1] BRACKET  
13. 4L-9337 C [2] BOLT (3/8-16X1.5-IN)  
14. 8T-9364 C [4] BOLT (1/4-20X0.625-IN)  
  8T-4205 C [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 3E-0075 CY [2] SWITCH GP-MAGNETIC (24-VOLT)(STARTING MOTOR)  
16. 207-1564 Y [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)(LH)  
17. 4B-2043 C [3] NUT (8-32-THD)  
18. 4B-4863 C [3] WASHER (4.7X11X1.2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP44960798
 

6V-0590: STARTING MOTOR GP-ELECTRIC

6V-0590 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 9L-6529 STARTING MOTOR GP-ELECTRIC
Type 1
FIELD REPLACEMENT ORDER @@@@@237-1962@@@@@, @@@@@338-3454@@@@@
AN ATTACHMENT
i02092235 SEBP4496
6V0590 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
7A. 3T-3424 [1] PLUG-FELT  
7B. 3T-3423 [1] CUP  
7C. 9G-4101 [1] BUSHING-END  
8. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
8A. 9F-5599 [12] LOCKWASHER  
8B. 6T-0371 [1] INSULATOR  
8C. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
8D. 3T-9494 [1] SPRING  
8E. 3T-4709 [3] PLATE  
8F. 3T-4710 [3] PLATE  
8G. 2L-6679 [3] PLATE-INSULATOR  
8H. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
8J. 6T-0372 [1] PLATE  
8K. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 B [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 306-3998 [1] BOOT-RUBBER  
19. 9M-7609 [1] SPRING (SHIFT LEVER)  
20. 4M-1827 [1] RETAINER-SPRING  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 0S-1597 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS (STARTING MOTOR)  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
45. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [6] NUT (10-32-THD)  
51. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
55. 3T-3424 [2] PLUG-FELT  
56. 3T-3423 [2] CUP  
57. 1M-9968 [1] BUSHING  
58. 2F-6678 [1] SEAL-LIP TYPE  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
62. 125-6536 [1] TERMINAL AS  
63. 7T-9123 [1] GASKET-PLATE  
64. 125-6535 [1] COVER-STARTING MOTOR  
  B   USE AS REQUIRED
 

#SEBP44960799
 

6V-0590: STARTING MOTOR GP-ELECTRIC

6V-0590 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 9L-6529 STARTING MOTOR GP-ELECTRIC
Type 2
FIELD REPLACEMENT ORDER @@@@@237-1962@@@@@, @@@@@338-3454@@@@@
AN ATTACHMENT
i07562806 SEBP4496
6V0590 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your C27 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
7A. 3T-3424 [1] PLUG-FELT  
7B. 3T-3423 [1] CUP  
7C. 9G-4101 [1] BUSHING-END  
8. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
8A. 9F-5599 [12] LOCKWASHER  
8B. 6T-0371 [1] INSULATOR  
8C. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
8D. 3T-9494 [1] SPRING  
8E. 3T-4709 [3] PLATE  
8F. 3T-4710 [3] PLATE  
8G. 2L-6679 [3] PLATE-INSULATOR  
8H. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
8J. 6T-0372 [1] PLATE  
8K. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 B [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 306-3998 [1] BOOT-RUBBER  
19. 9M-7609 [1] SPRING (SHIFT LEVER)  
20. 4M-1827 [1] RETAINER-SPRING  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 0S-1597 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS (STARTING MOTOR)  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
45. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [6] NUT (10-32-THD)  
51. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
55. 3T-3424 [2] PLUG-FELT  
56. 3T-3423 [2] CUP  
57. 1M-9968 [1] BUSHING  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
63. 7T-9123 [1] GASKET-PLATE  
64. 125-6535 [1] COVER-STARTING MOTOR  
  B   USE AS REQUIRED
 

Information:

Operation and Maintenance Manual
Cold Weather Starting
C27 and C32 Industrial Engines
Starting the Engine
C27 and C32 Industrial Engines
Starting Motor - Inspect - If Equipped
C27 and C32 Industrial Engines
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Disassembly and Assembly
Electric Starting Motor - Remove and Install
C27 and C32 Industrial Engines
Electric Starting Motor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog C27 :

STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
285-5320 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1564 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1556 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1549 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1549 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-AIR
7C-3372 STARTING MOTOR GP-AIR
STARTING MOTOR GP-ELECTRIC
358-4855 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
358-4855 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
4N-1061 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
4N-1061 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
5N-2685 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
5N-2685 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
6N-4515 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
6V-0590 STARTING MOTOR GP-ELECTRIC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.