AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

257-9145 COVER GP-CYLINDER BLOCK S/N KHX2443-UP PART OF 387-8486 ENGINE AR, 240-1860, 276-1333 ENGINE AR-COMPLETE ALSO AN ATTACHMENT 325D MH


BASIC ENGINE
CYLINDER BLOCK GP
HOUSING GP-FRONT
VALVE MECHANISM GP
CRANKSHAFT GP

EXCAVATOR 325D MH EXCAVATOR C4H
 325D Material Handler C4H00001-UP (MACHINE) POWERED BY C-7 Engine SEBP4504 325D MH C4H   (2006)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
257-9145 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
257-9145 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
221-4482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
263-3774 CYLINDER BLOCK GP
CYLINDER BLOCK GP
305-8141 CYLINDER BLOCK GP
PLUG GP-CYLINDER BLOCK
159-0303 PLUG GP-CYLINDER BLOCK
PLUG GP-ENGINE
162-8068 PLUG GP-ENGINE
 

#SEBP45040020
 

257-9145: COVER GP-CYLINDER BLOCK

257-9145 COVER GP-CYLINDER BLOCK
S/N KHX2443-UP
PART OF 387-8486 ENGINE AR, 240-1860, 276-1333 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02553827 SEBP4504
2579145 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6544 [1] COVER  
2. 4P-5918 [3] CLIP  
3. 4Y-9652 [2] GASKET (SIDE COVER)  
4. 7W-3872 [6] SLEEVE (MARKED X)  
5. 110-7618 [3] BOLT AS  
6. 342-4977 [2] COVER-SIDE  
7. 371-1607 [1] PLATE  
8. 371-3481 [1] GASKET (BREATHER)  
9. 457-7389 [1] COVER-SIDE (BREATHER)  
10. 517-0553 [1] GASKET  
11. 150-4086 M [2] SCREW (M4X0.7X16-MM)  
12. 210-3321 M [3] STUD (M8X1.25-THD)  
13. 216-7352 M [1] SCREW-TRUSS HEAD (M8X1.25X30-MM)  
14. 5C-7261 M [3] NUT (M8X1.25-THD)  
15. 6V-2317 M [20] BOLT (M8X1.25X30-MM)  
16. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
17. 9M-1974 [24] WASHER-HARD (8.8X16X2-MM THK)  
18. 9X-2099 M [1] STUD (M8X1.25X52.75-MM)  
  M   METRIC PART
 

#SEBP45040021
 

118-1727: COVER GP-FRONT HOUSING

118-1727 COVER GP-FRONT HOUSING -ACCESSORY DRIVE
S/N KHX1-UP
REQUIRED ON ENGINES WITHOUT FACTORY INSTALLED AIR COMPRESSOR
PART OF 387-8486 ENGINE AR, 240-1860, 276-1333 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i00480574 SEBP4504
1181727 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 6V-5696 M [2] BOLT (M12X1.75X80-MM)  
3. 4W-2026 [1] COVER  
4. 135-9819 [1] SEAL-INTEGRAL  
5. 6V-8149 M [2] NUT (M12X1.75-THD)  
  M   METRIC PART
 

#SEBP45040022
 

172-8732: COVER GP-FRONT HOUSING

172-8732 COVER GP-FRONT HOUSING
S/N KHX1-UP
PART OF 387-8486 ENGINE AR, 240-1860, 276-1333 ENGINE AR-COMPLETE
FOR USE WITH RH SERVICED ENGINES
ALSO AN ATTACHMENT
i01118909 SEBP4504
1728732 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-1445 [1] COVER (TURNING TOOL)  
2. 061-9455 [1] SEAL-O-RING  
3. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
4. 344-5674 M [2] NUT (M8X1.25-THD)  
  M   METRIC PART
 

#SEBP45040023
 

211-9120: COVER GP-FRONT HOUSING

211-9120 COVER GP-FRONT HOUSING
S/N KHX1-UP
PART OF 387-8486 ENGINE AR, 227-5946 ENGINE AR-CORE
FOR USE WITH OIL FILLER
ALSO AN ATTACHMENT
i01622046 SEBP4504
2119120 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-1776 [1] COVER AS-FRONT  
1A. 126-1757 [2] WASHER (10.85X19.3X1.27-MM THK)  
1B. 136-0822 [2] STUD  
2. 166-1781 [1] GASKET  
 

#SEBP45040024
 

252-2328: COVER GP-VALVE MECHANISM

252-2328 COVER GP-VALVE MECHANISM
S/N KHX1-3795
FRONT AND REAR ENGINE OIL FILL
PART OF 240-1860, 276-1333 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02436817 SEBP4504
2522328 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 242-2450 [1] COVER GP (VALVE MECHANISM)  
1A. 217-5701 J SEAL-BULK (21-DM)(VALVE MECHANISM COVER)  
2. 204-4444 [1] BREATHER AS (CRANKCASE)  
  341-0979 [1] SEAL-O-RING  
  160-0526 [1] SEAL-O-RING  
  185-3159 [1] FILTER ELEMENT-BREATHER (CRANKCASE)  
3. 271-2417 [1] COVER GP-VALVE MECHANISM (BASE)  
3A. 244-4486 [1] SEAL-COVER (VALVE MECHANISM BASE)  
4. 246-5083 [13] SLEEVE-SPACER  
5. 099-3649 M [13] BOLT (M8X1.25X40-MM)  
6. 8T-4224 [13] WASHER-HARD (8.8X16X2-MM THK)  
7. 227-4531 [1] CAP AS-ENGINE OIL FILLER  
  7F-8268 [1] SEAL-O-RING  
  J   ORDER BY THE DECIMETER
  M   METRIC PART
 

#SEBP45040025
 

252-2328: COVER GP-VALVE MECHANISM

252-2328 COVER GP-VALVE MECHANISM
S/N KHX3796-33810
FRONT AND REAR ENGINE OIL FILL
PART OF 240-1860, 276-1333 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02549651 SEBP4504
2522328 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 310-9247 [1] BASE GP-VALVE COVER (BASE)  
1A. 304-4924 [1] SEAL AS (VALVE MECHANISM BASE)  
2. 273-2838 C [13] SLEEVE-SPACER  
3. 288-9179 C [1] COVER GP-VALVE MECHANISM  
3A. 272-0388 C [1] SEAL-VALVE COVER  
4. 099-3649 M [13] BOLT (M8X1.25X40-MM)  
5. 8T-4224 [13] WASHER-HARD (8.8X16X2-MM THK)  
6. 227-4531 [1] CAP AS-ENGINE OIL FILLER  
  7F-8268 [1] SEAL-O-RING  
7. 204-4444 [1] BREATHER AS (CRANKCASE)  
  341-0979 [1] SEAL-O-RING (CRANKCASE BREATHER)  
  160-0526 [1] SEAL-O-RING  
  185-3159 [1] FILTER ELEMENT-BREATHER (CRANKCASE)(CRANKCASE)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP45040026
 

369-8134: COVER GP-VALVE MECHANISM

369-8134 COVER GP-VALVE MECHANISM
S/N KHX33811-UP
PART OF 387-8486 ENGINE AR, 240-1860, 276-1333 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i04375314 SEBP4504
3698134 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-8109 [1] CLAMP  
2. 9Y-2988 [1] BREATHER AS (CRANKCASE)  
3. 227-4531 [1] CAP AS-ENGINE OIL FILLER  
3A. 7F-8268 [1] SEAL-O-RING  
4. 273-2838 [13] SLEEVE-SPACER  
5. 288-9179 [1] COVER GP-VALVE MECHANISM  
5A. 272-0388 [1] SEAL-VALVE COVER  
6. 310-9247 [1] BASE GP-VALVE COVER  
6A. 304-4924 [1] SEAL AS  
7. 365-5169 [1] ADAPTER  
8. 061-9456 [1] SEAL-O-RING  
9. 099-3649 M [13] BOLT (M8X1.25X40-MM)  
10. 6V-3831 [1] SEAL-O-RING  
11. 8T-4224 [13] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP45040027
 

210-5590: CRANKSHAFT GP

210-5590 CRANKSHAFT GP
S/N KHX1-5002
PART OF 227-5946 ENGINE AR-CORE
ALSO AN ATTACHMENT
i01850862 SEBP4504
2105590 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-5658 [1] CRANKSHAFT AS  
1A. 1B-8705 [1] KEY-WOODRUFF  
1B. 2W-8147 [1] GEAR (50-TEETH)  
2. 212-4893 J [1] BEARING-THRUST (STANDARD)  
  229-5153 AB BEARING-THRUST (0.25-MM US)  
  229-5154 AB BEARING-THRUST (0.5-MM US)  
  229-5155 AB BEARING-THRUST (0.5-MM OS)  
  229-5156 AB BEARING-THRUST (0.5-MM OS, 0.5-MM US)  
3. 107-7708 J [6] BEARING-MAIN (STANDARD)  
  145-0168 AB BEARING-MAIN (0.5-MM OS)  
  145-0170 AB BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  145-0162 AB BEARING-MAIN (0.25-MM US)  
  145-0164 AB BEARING-MAIN (0.5-MM US)  
   
  7C-7980 ABF [1] SLEEVE-OIL SEAL  
    (THIS WEAR SLEEVE IS USED ONLY TO SALVAGE (REPAIR) THE REAR SEAL SURFACE OF THE CRANKSHAFT)
   
    AVAILABLE REPAIR KIT(S):
  196-9519 AJ BEARING GP-MAIN (CRANKSHAFT)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP45040028
 

210-5590: CRANKSHAFT GP

210-5590 CRANKSHAFT GP
S/N KHX5003-5022
PART OF 227-5946 ENGINE AR-CORE
ALSO AN ATTACHMENT
i02682424 SEBP4504
2105590 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-5480 C [1] CRANKSHAFT AS  
1A. 1B-8705 [1] KEY-WOODRUFF  
1B. 2W-8147 [1] GEAR (50-TEETH)  
2. 212-4893 J [1] BEARING-THRUST (STANDARD)  
  229-5153 AB BEARING-THRUST (0.25-MM US)  
  229-5154 AB BEARING-THRUST (0.5-MM US)  
  229-5155 AB BEARING-THRUST (0.5-MM OS)  
  229-5156 AB BEARING-THRUST (0.5-MM OS, 0.5-MM US)  
3. 107-7708 J [6] BEARING-MAIN (STANDARD)  
  145-0168 AB BEARING-MAIN (0.5-MM OS)  
  145-0170 AB BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  145-0162 AB BEARING-MAIN (0.25-MM US)  
  145-0164 AB BEARING-MAIN (0.5-MM US)  
   
  7C-7980 ABF [1] SLEEVE-OIL SEAL  
    (THIS WEAR SLEEVE IS USED ONLY TO SALVAGE (REPAIR) THE REAR SEAL SURFACE OF THE CRANKSHAFT)
   
    AVAILABLE REPAIR KIT(S):
  196-9519 AJ BEARING GP-MAIN (CRANKSHAFT)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP45040029
 

210-5590: CRANKSHAFT GP

210-5590 CRANKSHAFT GP
S/N KHX5023-UP
PART OF 227-5946, 387-8535 ENGINE AR-CORE
ALSO AN ATTACHMENT
i02682428 SEBP4504
2105590 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 489-2731 C [1] CRANKSHAFT AS  
1A. 1B-8705 [1] KEY-WOODRUFF  
1B. 2W-8147 [1] GEAR (50-TEETH)  
2. 212-4893 [1] BEARING-THRUST (STANDARD)  
  229-5153 AB BEARING-THRUST (0.25-MM US)  
  229-5154 AB BEARING-THRUST (0.5-MM US)  
  229-5155 AB BEARING-THRUST (0.5-MM OS)  
  229-5156 AB BEARING-THRUST (0.5-MM OS, 0.5-MM US)  
3. 107-7708 [6] BEARING-MAIN (STANDARD)  
  145-0168 AB BEARING-MAIN (0.5-MM OS)  
  145-0170 AB BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  145-0162 AB BEARING-MAIN (0.25-MM US)  
  145-0164 AB BEARING-MAIN (0.5-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Block Cover Group
C7 Engines for Caterpillar Built Machines
Main Bearing Journal
C7 Engines for Caterpillar Built Machines
Piston Cooling Jet
C7 Engines for Caterpillar Built Machines
Piston Cooling Jet
C7 Engines for Caterpillar Built Machines
Cylinder Block
C7 Engines for Caterpillar Built Machines
Cylinder Block Cover Group
C7 Engines for Caterpillar Built Machines
Cylinder Block Cover Group
C7 Engines for Caterpillar Built Machines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
Testing and Adjusting
Cylinder Block - Inspect
C7 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C7 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C7 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C7
Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C7
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C7
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C7
Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C7
Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 325D MH :

COVER GP-CYLINDER BLOCK
257-9145 COVER GP-CYLINDER BLOCK
CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
CAMSHAFT GP
212-4289 CAMSHAFT GP
BRACKET GP-ENGINE
276-1331 BRACKET GP-ENGINE
BRACKET GP-ENGINE
253-0437 BRACKET GP-ENGINE
BELT TENSIONER GP
253-0433 BELT TENSIONER GP
279-7824 INSTALLATION AR-ENGINE
222-8381 INSTALLATION AR-ENGINE
COVER GP-FRONT HOUSING
118-1727 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
172-8732 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
211-9120 COVER GP-FRONT HOUSING
COVER GP-VALVE MECHANISM
252-2328 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
252-2328 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
369-8134 COVER GP-VALVE MECHANISM
CRANKSHAFT GP
210-5590 CRANKSHAFT GP
CRANKSHAFT GP
210-5590 CRANKSHAFT GP

Truck sale:

2011 CAT 325D MH
Call 
2011 CAT 325D MH

Process Inc.
Bellevue, Washington
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.