259-4940 HARNESS AS-WIRING -SERVICE CONNECTOR S/N C4H1-UP; RJK1-UP PART OF 302-8525 WIRING GP-COMMUNICATION AN ATTACHMENT 325D MH

Part No	Qty	Parts name
9X-3401	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
8T-8731	[1]	PLUG-CONNECTOR (3-PIN)
8T-8737	[6]	PLUG-SEAL
243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
8T-8732	[1]	RECEPTACLE-CONNECTOR (3-PIN)

#SEBP45040231

381-2499: HARNESS AS-WIRING

HARNESS AS-WIRING

381-2499 HARNESS AS-WIRING
S/N KHX17464-UP
PART OF 330-6022 WIRING GP-ENGINE
ALSO AN ATTACHMENT

i05650344 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
211-6807	[1]	COVER-CONNECTOR
155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
		(EACH KIT INCLUDES PLUS AS, WEDGE, & INTERFACE SEAL)
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
9X-3401	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[12]	PIN-CONNECTOR (14-GA TO 16-GA)
160-8124	[1]	PLUG AS (2-PIN)
8T-8737	[2]	PLUG-SEAL
100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
126-5011	[1]	SEAL-CONNECTOR
111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
126-5011	[1]	SEAL-CONNECTOR
230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
		(EACH INCLUDES)
264-7029	[1]	SEAL-CONNECTOR
230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
264-7030	[1]	SEAL-CONNECTOR
237-0227	[3]	PLUG AS-CONNECTOR (3-PIN)
		(EACH INCLUDES)
264-7030	[1]	SEAL-CONNECTOR
264-5732	[1]	PLUG AS-CONNECTOR (120-PIN)
288-7324	[1]	SEAL-CONNECTOR
8T-8737	[85]	PLUG-SEAL
289-5150 E		SLEEVE (31-CM)
9X-3402	[65]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[65]	SOCKET-CONNECTOR (14-GA TO 16-GA)
7K-1181	[3]	STRAP-CABLE
329-3734 E		TAPE-ELECTRICAL (16-CM)
1P-0810	[1]	TAPE-ELECTRICAL
305-5362	[4]	TERMINAL AS (18-GA)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)
E		ORDER BY THE CENTIMETER

#SEBP45040232

9Y-5316: HEATER GP-JACKET WATER

HEATER GP-JACKET WATER

9Y-5316 HEATER GP-JACKET WATER
S/N C4H1-UP; RJK1-UP
120-VOLT, AC
PART OF 267-5123 ENGINE AR
FOR USE WITH ENGINE BLOCK
CANNOT BE USED WITH MOUNTING FOR LEFT HAND OIL FILTER

i00443719 SEBP4504

9Y5316 HEATER GP-JACKET WATER Parts scheme

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9N-5253	[1]	CORD AS-HEATER ELEMENT (120-VOLT, 15-AMPERE)
2.	124-0686	[1]	ELEMENT AS-JACKET WATER HEATER (120-VOLT, 1000-WATT)
	133-6517	[1]	CAP AS-DUST
	132-1448	[1]	KIT-SEAL
			(INCLUDES SEALS, SPACER & RINGS)

#SEBP45040233

302-8526: INSTALLATION AR-COMMUNICATION

INSTALLATION AR-COMMUNICATION

302-8526 INSTALLATION AR-COMMUNICATION -PRODUCT LINK 321SR
S/N C4H1-UP; RJK1-UP
AN ATTACHMENT

i02747248 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
302-8523 Y	[1]	CONTROL & MTG GP-COMMUNICATION (PRODUCT LINK)
302-8524 Y	[1]	CONTROL & MTG GP-COMMUNICATION (PRODUCT LINK, ANTENNA)
302-8525 Y	[1]	WIRING GP-COMMUNICATION (PRODUCT LINK 321SR)
Y		SEPARATE ILLUSTRATION

#SEBP45040234

153-2521: LAMP GP-FLOOD

LAMP GP-FLOOD

153-2521 LAMP GP-FLOOD
S/N C4H1-211; RJK1-UP
24-VOLT
PART OF 303-2005 LIGHTING GP-FLOOD
AN ATTACHMENT

i00998673 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-5210 M	[2]	SCREW-MACHINE (M4X0.7X10-MM)
2.	3B-4501	[2]	LOCKWASHER
3.	351-9918	[1]	LAMP-HALOGEN (24-VOLT, 70-WATT)
4.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
5.	8T-4244 M	[1]	NUT (M12X1.75-THD)
6.	174-7791 M	[1]	SCREW-TAPPING
7.	9B-0453	[1]	LOCKWASHER
8.	170-6993	[1]	COVER
9.	180-3861 M	[4]	SCREW-TAPPING
10.	170-9417	[1]	LENS AS
11.	170-9418	[1]	BAND
	M		METRIC PART

#SEBP45040235

153-2523: LAMP GP-FLOOD

LAMP GP-FLOOD

153-2523 LAMP GP-FLOOD
S/N C4H1-UP; RJK1-UP
24-VOLT
PART OF 4I-5409 LIGHTING GP-FLOOD

i00998903 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-5210 M	[2]	SCREW-MACHINE (M4X0.7X10-MM)
2.	3B-4501	[2]	LOCKWASHER
3.	351-9918	[1]	LAMP-HALOGEN (24-VOLT, 70-WATT)
4.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
5.	8T-4244 M	[1]	NUT (M12X1.75-THD)
6.	174-7791 M	[1]	SCREW-TAPPING
7.	9B-0453	[1]	LOCKWASHER
8.	170-6993	[1]	COVER
9.	170-9417	[1]	LENS AS
10.	180-3861 M	[4]	SCREW-TAPPING
11.	170-9418	[1]	BAND
	M		METRIC PART

#SEBP45040236

219-6485: LAMP GP-FLOOD

LAMP GP-FLOOD

219-6485 LAMP GP-FLOOD
S/N C4H212-UP; RJK1-UP
24-VOLT, 70-WATT
PART OF 303-2005 LIGHTING GP-FLOOD
AN ATTACHMENT

i01849694 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	351-9918	[1]	LAMP-HALOGEN (24-VOLT, 70-WATT)
2.	9X-4244 M	[2]	SCREW-SPECIAL (M4X1.79X25-MM)
3.	175-4291	[1]	BRACKET AS
4.	202-6614	[1]	LENS AS (FLOODLIGHT)
5.	175-4292	[1]	BODY AS
6.	164-7556	[1]	BRACKET (LAMP RETAINING)
7.	247-4285	[1]	BOLT (M8X1.25X50-MM)
8.	6V-9189 M	[1]	LOCKNUT (M8X1.25-THD)
9.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP45040237

163-6772: LIGHTING GP-FLOOD

LIGHTING GP-FLOOD

163-6772 LIGHTING GP-FLOOD -CAB
S/N C4H1-UP; RJK1-UP
PART OF 276-9583 CAB GP

i02159166 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	163-6795	[2]	STRAP-CABLE
2.	163-6813	[1]	COVER (LH)
3.	163-6814	[1]	COVER (RH)
4.	167-3437	[1]	BRACKET AS (LH)
5.	167-3438	[1]	BRACKET AS (RH)
6.	167-3441	[2]	LAMP GP-FLOOD (24-VOLT)(CAB)
			(EACH INCLUDES)
	9X-3463	[1]	LAMP-HALOGEN (24-VOLT, 70-WATT)
7.	167-3456	[2]	HARNESS AS-LIGHTING (CAB FLOODLIGHT)
8.	8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
9.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
10.	8T-4970 M	[4]	BOLT (M6X1X14-MM)
11.	8T-6411 M	[6]	SCREW-MACHINE (M6X1X12-MM)
12.	8T-6412 M	[2]	SCREW-MACHINE (M6X1X20-MM)
13.	9X-8256	[12]	WASHER (6.6X12X2-MM THK)
14.	9X-8256 B	[4]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP45040238

303-2005: LIGHTING GP-FLOOD

LIGHTING GP-FLOOD

303-2005 LIGHTING GP-FLOOD -BOOM
S/N C4H1-211; RJK1-UP
PART OF 272-8456 BOOM AR-MATERIAL HANDLING
AN ATTACHMENT

i02707404 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7I-2673	[2]	STRAP-CABLE
2.	111-4836	[4]	CLIP
3.	116-0118	[1]	CLIP
4.	153-2521 Y	[2]	LAMP GP-FLOOD (24-VOLT)
5.	303-2006	[1]	HARNESS AS-FRONT LIGHTING
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	111-4837	[1]	CLIP
7.	124-9633	[2]	CLIP (SLOT)
8.	134-3284	[2]	BRACKET
9.	5P-9297	[2]	CLIP (LOOP)
10.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
11.	8T-4133 M	[7]	NUT (M10X1.5-THD)
12.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
13.	8T-4190 M	[2]	BOLT (M16X2X25-MM)
14.	9X-8257	[2]	WASHER (17.5X30X3.5-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP45040239

303-2005: LIGHTING GP-FLOOD

LIGHTING GP-FLOOD

303-2005 LIGHTING GP-FLOOD -BOOM
S/N C4H212-UP; RJK1-UP
PART OF 272-8456 BOOM AR-MATERIAL HANDLING
AN ATTACHMENT

i03009008 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7I-2673	[2]	STRAP-CABLE
2.	111-4836	[4]	CLIP
3.	116-0118	[1]	CLIP
4.	219-6485 CY	[2]	LAMP GP-FLOOD (24-VOLT)
5.	313-1575 C	[1]	HARNESS AS-LIGHTING
6.	111-4837	[1]	CLIP
7.	124-9633	[2]	CLIP (SLOT)
8.	134-3284	[2]	BRACKET
9.	5P-9297	[2]	CLIP (LOOP)
10.	8T-4121 C	[10]	WASHER-HARD (11X21X2.5-MM THK)
11.	8T-4133 CM	[9]	NUT (M10X1.5-THD)
12.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
13.	8T-4190 M	[2]	BOLT (M16X2X25-MM)
14.	9X-8257	[2]	WASHER (17.5X30X3.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

HARNESS GP

Special Instruction

Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408}
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat^® Products Equipped with BR Series Connectors {1408}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Technical Information Bulletin

Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

Tool Operating Manual

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Magazine

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 325D MH :

259-4887 HARNESS AS-WIRING

305-5373 HARNESS AS-POWER

520-1511 HARNESS AS-ENGINE

222-5917 HARNESS AS-ENGINE

198-2713 HARNESS AS-ENGINE

326-6153 GENERATOR GP-HYDRAULIC

308-0147 GENERATOR GP-HYDRAULIC

381-2499 HARNESS AS-WIRING

9Y-5316 HEATER GP-JACKET WATER

302-8526 INSTALLATION AR-COMMUNICATION

153-2521 LAMP GP-FLOOD

153-2523 LAMP GP-FLOOD

219-6485 LAMP GP-FLOOD

163-6772 LIGHTING GP-FLOOD

303-2005 LIGHTING GP-FLOOD

Truck sale:

Call

2011 CAT 325D MH

Process Inc.
Bellevue, Washington