259-5053 WIRING GP-FUEL SYSTEM -PRIMING PUMP S/N C4H1-UP; RJK1-UP PART OF 267-5125, 267-5126 CHASSIS AR 325D MH

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 259-5053 WIRING GP-
1. 273-6400 WIRING GP-
2. 302-7149 WIRING GP-
3. 354-0012 WIRING GP-
4. 274-5072 WIRING GP-
5. 274-5072 WIRING GP-
6. 274-5072 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

7. 227-6116 DRIVE GP-F
8. 227-6138 DRIVE GP-F
9. 267-6796 DRIVE GP-F
0. INFORMATION

EXCAVATOR 325D MH EXCAVATOR C4H
325D Material Handler C4H00001-UP (MACHINE) POWERED BY C-7 Engine SEBP4504 325D MH C4H (2006)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

291-7460 WIRING GP-FAN

259-4965 WIRING GP-FINE SWING

259-5053 WIRING GP-FUEL SYSTEM

273-6400 WIRING GP-HYDRAULIC GENERATOR

302-7149 WIRING GP-HYDRAULIC GENERATOR

354-0012 WIRING GP-MONITOR

#SEBP45040320

259-5053: WIRING GP-FUEL SYSTEM

WIRING GP-FUEL SYSTEM

259-5053 WIRING GP-FUEL SYSTEM -PRIMING PUMP
S/N C4H1-UP; RJK1-UP
PART OF 267-5125, 267-5126 CHASSIS AR

i02456310 SEBP4504

2595053 WIRING GP-FUEL SYSTEM Parts scheme

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[10]	STRAP-CABLE
2.	7K-1181	[7]	STRAP-CABLE
3.	137-6606	[1]	FILM-IDENTIFICATION (FUEL)
4.	165-5970 Y	[1]	SWITCH GP-TOGGLE (FUEL PRIMING PUMP)
5.	267-7967	[1]	HARNESS AS-PUMP (FUEL)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	Y		SEPARATE ILLUSTRATION

#SEBP45040321

273-6400: WIRING GP-HYDRAULIC GENERATOR

WIRING GP-HYDRAULIC GENERATOR

273-6400 WIRING GP-HYDRAULIC GENERATOR -CABLE
S/N C4H1-UP; RJK1-UP
PART OF 273-6391, 273-6392 GENERATOR AR-HYDRAULIC
AN ATTACHMENT

i02467274 SEBP4504

2736400 WIRING GP-HYDRAULIC GENERATOR Parts scheme

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	194-0463	[1]	CABLE AS

	7K-1181 BF	[10]	STRAP-CABLE
	B		USE AS REQUIRED
	F		NOT SHOWN

#SEBP45040322

302-7149: WIRING GP-HYDRAULIC GENERATOR

WIRING GP-HYDRAULIC GENERATOR

302-7149 WIRING GP-HYDRAULIC GENERATOR -CABLE
S/N C4H1-UP; RJK1-UP
PART OF 273-6392 GENERATOR AR-HYDRAULIC
AN ATTACHMENT

i03479601 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
317-9124	[1]	CABLE AS
2L-8052	[2]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
		-OR-
2L-8060	[2]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
119-3662 BE		TUBE-HEAT SHRINK (10.85-MM DIA)
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER

#SEBP45040323

354-0012: WIRING GP-MONITOR

WIRING GP-MONITOR

354-0012 WIRING GP-MONITOR -GENERATOR
S/N C4H1-UP; RJK1-UP
PART OF 273-6395 ELECTRONICS GP-MONITOR
AN ATTACHMENT

i03880633 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	096-0061	[10]	STRAP-CABLE
2.	260-1935	[1]	HARNESS AS-CONTROL
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(13-CM)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	173-5453 E		CABLE (453-CM)
	E		ORDER BY THE CENTIMETER

#SEBP45040324

274-5072: WIRING GP-PLATFORM

WIRING GP-PLATFORM

274-5072 WIRING GP-PLATFORM
S/N C4H1-UP; RJK1-UP
PART OF 267-5129 OPERATOR AR
Type 1

i02470148 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181	[12]	STRAP-CABLE
4.	111-4836	[3]	CLIP
5.	111-4838	[3]	CLIP
6.	111-4839	[3]	STRAP
7.	116-0118	[12]	CLIP
8.	209-0381	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
9.	274-5073	[1]	HARNESS AS-PLATFORM
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INLCUDES RECEPTACLE & WEDGE)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(PLUG KITS INCLUDE PLUG AS, WEDGE & INTERFACE SEAL)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4508	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	197-4385	[2]	DIODE
	3S-2093	[24]	STRAP-CABLE
10.	278-9575	[1]	COVER
11.	095-0728 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
12.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
13.	247-0896	[1]	HARNESS AS-WIRING (CONVERTER)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5011	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
14.	7X-2621 M	[6]	BOLT (M10X1.5X12-MM)
15.	7Y-3173 M	[6]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
16.	8T-0328	[6]	WASHER-HARD (5.5X10X1-MM THK)
17.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
18.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
	M		METRIC PART

#SEBP45040325

274-5072: WIRING GP-PLATFORM

WIRING GP-PLATFORM

274-5072 WIRING GP-PLATFORM
S/N C4H1-UP; RJK1-UP
PART OF 267-5129 OPERATOR AR
Type 2

i03485484 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	6Y-6584 C	[1]	STRAP AS-GROUND
3.	7K-1181	[12]	STRAP-CABLE
4.	111-4836	[3]	CLIP
5.	111-4838	[3]	CLIP
6.	111-4839	[3]	STRAP
7.	116-0118 C	[13]	CLIP
8.	209-0381	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
9.	330-1927 C	[1]	HARNESS AS-PLATFORM
10.	278-9575	[1]	COVER
11.	095-0728 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
12.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
13.	247-0896	[1]	HARNESS AS-WIRING (CONVERTER)
14.	7X-2621 M	[6]	BOLT (M10X1.5X12-MM)
15.	7Y-3173 M	[6]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
16.	8T-0328	[6]	WASHER-HARD (5.5X10X1-MM THK)
17.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
18.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP45040326

274-5072: WIRING GP-PLATFORM

WIRING GP-PLATFORM

274-5072 WIRING GP-PLATFORM
S/N C4H1-UP; RJK1-UP
PART OF 267-5129 OPERATOR AR
Type 3

i04077649 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	6Y-6584	[1]	STRAP AS-GROUND
3.	7K-1181	[12]	STRAP-CABLE
4.	111-4836	[3]	CLIP
5.	111-4838	[3]	CLIP
6.	111-4839	[3]	STRAP
7.	116-0118	[13]	CLIP
8.	278-9575	[1]	COVER
9.	324-5770 C	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
10.	330-1927	[1]	HARNESS AS-PLATFORM
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[24]	STRAP-CABLE
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	8T-8729	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[23]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[30]	PLUG-SEAL
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[8]	TERMINAL (FEMALE)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1039	[1]	TERMINAL (MALE)
	121-1168	[2]	CONNECTOR-RECEPTACLE
	121-1173	[33]	TERMINAL (MALE)
	125-4766	[1]	PLUG-CONNECTOR (17-PIN)
	125-4841	[1]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	9X-3402	[90]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[92]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	128-8952	[1]	WEDGE-PLUG LOCK (17-PIN)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8052	[1]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
	2L-8060	[1]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
	2L-8069	[4]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[2]	SEAL
	9X-3401	[36]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[36]	PIN-CONNECTOR (14-GA TO 16-GA)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	163-6759	[1]	SEAL
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[2]	DIODE
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
			(EACH INCLUDES)
	264-7032	[1]	SEAL-CONNECTOR
	238-2363	[23]	TERMINAL (FEMALE)
	238-2366	[5]	TERMINAL (MALE)
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4508	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
11.	357-3009 C	[1]	HARNESS AS-WIRING (CONVERTER)
	8T-8737	[6]	PLUG-SEAL
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	126-1767	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
	126-1768	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	230-5011	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
12.	095-0728 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
13.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
14.	7X-2621 M	[6]	BOLT (M10X1.5X12-MM)
15.	7Y-3173 CM	[4]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
16.	8T-0328 C	[4]	WASHER-HARD (5.5X10X1-MM THK)
17.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
18.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP45040327

227-6116: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6116 DRIVE GP-FINAL -WITHOUT MOTOR
S/N C4H1-210; RJK1-145
PART OF 227-6138 DRIVE GP-FINAL

i01933255 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE
2.	094-0578 B	[1]	PLATE (8-MM THK)
3.	094-0579 B	[1]	PLATE (9-MM THK)
4.	094-0580 B	[1]	PLATE (10-MM THK)
5.	094-1528	[12]	WASHER (53X84X1-MM THK)
6.	168-8452 J	[2]	BALL BEARING
7.	169-5585 J	[1]	HOUSING
8.	169-5589	[1]	GEAR-SUN (24-TEETH)
9.	169-5590	[1]	GEAR-SUN (24-TEETH)
10.	169-5592	[3]	GEAR-PLANETARY (23-TEETH)
11.	169-5593	[3]	GEAR-PLANETARY (23-TEETH)
12.	169-5601	[3]	SHAFT-PLANETARY
13.	169-5602	[3]	SHAFT-PLANETARY
14.	171-9387	[1]	GEAR-RING (64-TEETH)
15.	191-2569	[3]	BEARING AS (CAGED ROLLER)
16.	191-2570	[6]	BEARING AS (CAGED ROLLER)
17.	191-2571	[1]	CARRIER-PLANETARY
18.	191-2676	[1]	GEAR-RING (72-TEETH)
19.	191-2683	[1]	GEAR-SUN (20-TEETH)
20.	191-2684	[3]	GEAR-PLANETARY (21-TEETH)
21.	191-2685	[3]	BEARING AS
22.	191-2686	[1]	CARRIER AS
23.	191-2689	[3]	WASHER (34X70X1-MM THK)
24.	191-2690	[3]	WASHER (42.3X70X1-MM THK)
25.	199-4503	[1]	COVER
26.	207-1571 J	[1]	SEAL GP-DUO-CONE
26A.	214-3570	[2]	RING-TORIC
26B.	Z	[2]	SEAL-RING
27.	227-6117 J	[1]	HOUSING-MOTOR
28.	227-6118 J	[1]	RETAINER
29.	227-6119	[1]	CARRIER-PLANETARY
30.	227-6123 J	[2]	DOWEL
31.	227-6124 J	[2]	PLATE-WASHER
32.	093-1731	[2]	RING-RETAINING
33.	095-0891	[6]	PIN-SPRING
34.	096-0433	[3]	RING-RETAINING
35.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
36.	171-9298	[1]	SEAL-O-RING
37.	179-8733 M	[16]	BOLT (M20X2.5X170-MM)
38.	7M-8485	[2]	SEAL-O-RING
39.	7Y-0595	[3]	SPACER (58X79.6X6-MM THK)
40.	8T-0293 JM	[4]	BOLT (M12X1.75X20-MM)
41.	8T-4123	[16]	WASHER (3.62X5.75X0.375-MM THK)
42.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
43.	1U-8846 B		SEALANT-GASKET

			AVAILABLE REPAIR KIT(S):
	227-6125 J	[1]	KIT-HOUSING (FINAL DRIVE)
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	Z		NOT SERVICED SEPARATELY

#SEBP45040328

227-6138: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6138 DRIVE GP-FINAL -WITH MOTOR
S/N C4H1-210; RJK1-145
PART OF 275-9336 POWER TRAIN AR

i02486209 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	215-9956 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	227-6116 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP45040329

267-6796: DRIVE GP-FINAL

DRIVE GP-FINAL

267-6796 DRIVE GP-FINAL -WITHOUT MOTOR
S/N C4H211-UP; RJK146-UP
PART OF 296-6228 DRIVE GP-FINAL

i02958871 SEBP4504

For full view, you need register

Parts for your 325D MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE
2.	267-6863 BJ	[1]	SHIM (0.75-MM THK)
	7Y-0752 BJ	[1]	SHIM (0.8-MM THK)
	267-6864 BJ	[1]	SHIM (0.85-MM THK)
	267-6865 BJ	[1]	SHIM (0.9-MM THK)
	267-6866 BJ	[1]	SHIM (0.95-MM THK)
	7Y-0753 BJ	[1]	SHIM (1-MM THK)
	267-6867 BJ	[1]	SHIM (1.2-MM THK)
	267-6868 BJ	[1]	SHIM (1.4-MM THK)
	7Y-0754 BJ	[1]	SHIM (1.6-MM THK)
	267-6869 BJ	[1]	SHIM (1.8-MM THK)
	267-6870 BJ	[1]	SHIM (2-MM THK)
	267-6871 BJ	[1]	SHIM (2.3-MM THK)
5.	094-0578 B	[1]	PLATE (8-MM THK)
	094-0579 B	[1]	PLATE (9-MM THK)
	094-0580 B	[1]	PLATE (10-MM THK)
8.	094-1528	[12]	WASHER (53X84X1-MM THK)
9.	114-1540 J	[4]	PIN-DOWEL
10.	168-8452 J	[2]	BALL BEARING
11.	169-5589	[1]	GEAR-SUN (24-TEETH)
12.	169-5590	[1]	GEAR-SUN (24-TEETH)
13.	169-5592	[3]	GEAR-PLANETARY (23-TEETH)
14.	169-5593	[3]	GEAR-PLANETARY (23-TEETH)
15.	169-5601	[3]	SHAFT-PLANETARY
16.	169-5602	[3]	SHAFT-PLANETARY
17.	171-9387	[1]	GEAR-RING (64-TEETH)
18.	191-2569	[3]	BEARING AS (CAGED ROLLER)
19.	191-2570	[6]	BEARING AS (CAGED ROLLER)
20.	191-2571	[1]	CARRIER-PLANETARY
21.	191-2676	[1]	GEAR-RING (72-TEETH)
22.	191-2683	[1]	GEAR-SUN (20-TEETH)
23.	191-2684	[3]	GEAR-PLANETARY (21-TEETH)
24.	191-2685	[3]	BEARING AS
25.	191-2686	[1]	CARRIER AS
	191-2687	[3]	RACE-BEARING
26.	191-2689	[3]	WASHER (34X70X1-MM THK)
27.	191-2690	[3]	WASHER (42.3X70X1-MM THK)
28.	199-4503	[1]	COVER
29.	207-1571 J	[1]	SEAL GP-DUO-CONE
	214-3570	[2]	RING-TORIC
30.	267-6797 J	[1]	HOUSING-MOTOR
31.	267-6798 J	[1]	HOUSING
32.	267-6799	[1]	CARRIER-PLANETARY
33.	267-6800 J	[1]	GEAR-COUPLING
43.	093-1731	[2]	RING-RETAINING
44.	095-0891	[6]	PIN-SPRING
45.	096-0433	[3]	RING-RETAINING
46.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
47.	171-9298	[1]	SEAL-O-RING
48.	179-8733 M	[16]	BOLT (M20X2.5X170-MM)
49.	7M-8485	[2]	SEAL-O-RING
50.	7Y-0595	[3]	SPACER (58X79.6X6-MM THK)
51.	7Y-5217 JM	[16]	BOLT-SOCKET HEAD (M20X2.5X70-MM)
52.	8T-3282 J	[16]	WASHER-HARD (22X35X3.5-MM THK)
53.	8T-4123	[16]	WASHER (3.62X5.75X0.375-MM THK)
54.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
55.	1U-8846 B		SEALANT-GASKET

			AVAILABLE REPAIR KIT(S):
	267-6818 J	[1]	KIT-FINAL DRIVE BEARING
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
325D Material Handler

Battery - Recycle
325D Material Handler

Battery Disconnect Switch
325D Material Handler

Power Receptacle - If Equipped
325D Material Handler

Fuses - Replace
325D Material Handler

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Technical Information Bulletin

Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Monitoring System
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C7 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connector - Inspect
AccuGrade^® GPS (CD700)

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS (CD700)

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS (CD700)

Overload Warning - Set - If Equipped
325D Material Handler Hydraulic System

Connector Contact Description
AccuGrade^® GPS (CD700)

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

Troubleshooting

Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

Electrical Power Supply
AccuGrade^® GPS (CD700)

CAN Data Link - Test
AccuGrade^® GPS (CD700)

Indicator for Volts Fault
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Indicator for Over 75% Duty Cycle
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Indicator for Generator Hot
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Indicator for Positive Ground Fault
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Indicator for Negative Ground Fault
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

Connector Locations
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300