AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

291-7460 WIRING GP-FAN -CLUTCH S/N T2D1-UP PART OF 251-0448 WIRING GP-FAN AN ATTACHMENT 324D EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 324D EXCAVATOR T2D
 324D L Excavator T2D00001-UP (MACHINE) POWERED BY C-7 Engine SEBP4507 324D T2D   (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-ENGINE
330-6022 WIRING GP-ENGINE
251-0448 WIRING GP-FAN
WIRING GP-FAN
291-7460 WIRING GP-FAN
WIRING GP-FINE SWING
259-4965 WIRING GP-FINE SWING
WIRING GP-FUEL SYSTEM
259-5053 WIRING GP-FUEL SYSTEM
WIRING GP-MEDIUM PRESSURE
259-4949 WIRING GP-MEDIUM PRESSURE
 

#SEBP45070370
 

291-7460: WIRING GP-FAN

291-7460 WIRING GP-FAN -CLUTCH
S/N T2D1-UP
PART OF 251-0448 WIRING GP-FAN
AN ATTACHMENT
i02625587 SEBP4507
2917460 WIRING GP-FAN Parts scheme
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [9] STRAP-CABLE  
2. 116-0118 [1] CLIP  
3. 275-6911 [1] HARNESS AS-CONTROL  
4. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
  M   METRIC PART
 

#SEBP45070371
 

259-4965: WIRING GP-FINE SWING

259-4965 WIRING GP-FINE SWING
S/N T2D1-UP
PART OF 240-3972 CHASSIS AR
i02296363 SEBP4507
2594965 WIRING GP-FINE SWING Parts scheme
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-8109 [1] BRACKET AS  
2. 111-4836 [6] CLIP  
3. 111-4837 [2] CLIP  
4. 291-7551 [1] HARNESS AS-MOTOR (SWING MOTOR CONTROL)  
  103-2529 E HOSE (72-CM)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
5. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
7. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP45070372
 

259-5053: WIRING GP-FUEL SYSTEM

259-5053 WIRING GP-FUEL SYSTEM -PRIMING PUMP
S/N T2D1-UP
PART OF 247-7458 PUMP GP-FUEL PRIMING
AN ATTACHMENT
i02301743 SEBP4507
2595053 WIRING GP-FUEL SYSTEM Parts scheme
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
2. 7K-1181 [7] STRAP-CABLE  
3. 137-6606 [1] FILM-IDENTIFICATION (FUEL)  
4. 165-5970 Y [1] SWITCH GP-TOGGLE (FUEL PRIMING PUMP)  
5. 267-7967 [1] HARNESS AS-PUMP (FUEL)  
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  9W-0852 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP45070373
 

259-4949: WIRING GP-MEDIUM PRESSURE

259-4949 WIRING GP-MEDIUM PRESSURE
S/N T2D1-UP
PART OF 255-5833 CONTROL AR-AUXILIARY
AN ATTACHMENT
i02303619 SEBP4507
2594949 WIRING GP-MEDIUM PRESSURE Parts scheme
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [5] STRAP-CABLE  
2. 7K-1181 [5] STRAP-CABLE  
3. 102-7886 [1] SPACER (11X20X80-MM THK)  
4. 267-8019 [1] HARNESS AS-VALVE  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [1] STRAP-CABLE  
  8T-8737 [3] PLUG-SEAL  
  125-7874 BE TUBE-HEAT SHRINK (5.72-MM DIA)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
5. 132-5789 [1] CLIP (LADDER)  
6. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4198 M [1] BOLT (M10X1.5X100-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP45070374
 

251-0430: WIRING GP-PLATFORM

251-0430 WIRING GP-PLATFORM
S/N T2D1-UP
PART OF 229-9072 OPERATOR AR
i02296219 SEBP4507
2510430 WIRING GP-PLATFORM Parts scheme 2510430 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 7K-1181 [16] STRAP-CABLE  
4. 111-4836 [4] CLIP  
5. 111-4838 [2] CLIP  
6. 111-4839 [2] STRAP  
7. 116-0118 [14] CLIP  
8. 234-1122 [1] COVER  
9. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  2L-8074 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
10. 264-7095 [1] HARNESS AS-PLATFORM  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  8T-8729 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [25] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [23] STRAP-CABLE  
  8T-8737 [39] PLUG-SEAL  
  102-7964 [1] PLUG-CONNECTOR (16-PIN)  
  102-7965 [14] TERMINAL (FEMALE)  
  9W-0852 [7] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  116-0255 [1] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 BE TUBE-HEAT SHRINK (10.85-MM DIA)  
  121-1039 [1] TERMINAL (MALE)  
  121-1168 [2] CONNECTOR-RECEPTACLE  
  121-1173 [32] TERMINAL (MALE)  
  125-4766 [1] PLUG-CONNECTOR (17-PIN)  
  125-4841 [1] WEDGE-PLUG LOCK (21-PIN)  
  125-7874 BE TUBE-HEAT SHRINK (5.72-MM DIA)  
  125-7875 BE TUBE-HEAT SHRINK (7.44-MM DIA)  
  9X-3402 [97] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [97] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1768 [10] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8050 [2] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
    -OR-
  2L-8058 [2] TERMINAL-RING (8-GA, 1/4-IN SCREW)  
  2L-8052 [1] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [1] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
  2L-8069 [4] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  134-3296 [1] HOUSING-PLUG  
  134-3297 [2] SEAL  
  9X-3401 [25] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [25] PIN-CONNECTOR (14-GA TO 16-GA)  
  153-2620 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  155-2270 [12] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [3] DIODE  
  230-4009 [3] PLUG AS-CONNECTOR (12-PIN)  
  230-4011 [4] PLUG AS-CONNECTOR (2-PIN)  
  230-5010 [3] PLUG AS-CONNECTOR (6-PIN)  
  238-2363 [10] TERMINAL (FEMALE)  
  238-2366 [7] TERMINAL (MALE)  
  243-4505 [2] RECEPTACLE AS-CONNECTOR (2-PIN)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  243-4508 [4] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  243-4510 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
11. 095-0728 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
12. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
13. 3E-5169 [1] GUARD-SWITCH  
14. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
15. 7X-2621 M [7] BOLT (M10X1.5X12-MM)  
16. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP45070375
 

267-7643: WIRING GP-QUICK COUPLER

267-7643 WIRING GP-QUICK COUPLER
S/N T2D1-UP
PART OF 262-3580, 268-6820 CONTROL AR-COUPLER
AN ATTACHMENT
i02419838 SEBP4507
2677643 WIRING GP-QUICK COUPLER Parts scheme 2677643 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [14] STRAP-CABLE  
2. 7K-1181 [9] STRAP-CABLE  
3. 116-0118 [1] CLIP  
4. 267-7645 [1] HARNESS AS-SOLENOID (QUICK COUPLER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
5. 4P-7581 [1] CLIP (LADDER)  
6. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP45070376
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N T2D1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 1
AN ATTACHMENT
i02180323 SEBP4507
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 238-1593 [1] WIRE AS  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45070377
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N T2D1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 2
AN ATTACHMENT
i03161300 SEBP4507
2381570 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 319-1335 C [1] HARNESS AS-WIRING  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 C [2] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
16. 7K-1181 C [11] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45070378
 

227-6132: DRIVE GP-FINAL

227-6132 DRIVE GP-FINAL -WITH MOTOR
S/N T2D1-322
PART OF 199-4593 POWER TRAIN AR
i02391167 SEBP4507
2276132 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 215-9982 Y [1] MOTOR & MTG GP-TRAVEL  
2. 227-6133 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP45070379
 

227-6133: DRIVE GP-FINAL

227-6133 DRIVE GP-FINAL -WITHOUT MOTOR
S/N T2D1-322
PART OF 227-6132 DRIVE GP-FINAL
i02355737 SEBP4507
2276133 DRIVE GP-FINAL Parts scheme 2276133 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 324D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE  
2. 094-0578 [1] PLATE (8-MM THK)  
3. 094-0579 [1] PLATE (9-MM THK)  
4. 094-0580 [1] PLATE (10-MM THK)  
5. 094-1528 [12] WASHER (53X84X1-MM THK)  
6. 168-8452 J [2] BALL BEARING  
7. 169-5589 [1] GEAR-SUN (24-TEETH)  
8. 169-5590 [1] GEAR-SUN (24-TEETH)  
9. 169-5592 [3] GEAR-PLANETARY (23-TEETH)  
10. 169-5593 [3] GEAR-PLANETARY (23-TEETH)  
11. 169-5594 [1] GEAR-RING (65-TEETH)  
12. 169-5601 [3] SHAFT-PLANETARY  
13. 169-5602 [3] SHAFT-PLANETARY  
14. 169-5608 J [1] HOUSING  
15. 171-9297 [6] WASHER (34.3X62X1-MM THK)  
16. 191-2569 [3] BEARING AS (CAGED ROLLER)  
17. 191-2570 [6] BEARING AS (CAGED ROLLER)  
18. 191-2571 [1] CARRIER-PLANETARY  
19. 191-2674 [1] GEAR-SUN (25-TEETH)  
20. 191-2675 [3] GEAR-PLANETARY (20-TEETH)  
21. 191-2676 [1] GEAR-RING (72-TEETH)  
22. 191-2677 [3] BEARING AS (CAGED ROLLER)  
23. 191-2678 [1] CARRIER AS  
24. 199-4503 [1] COVER  
25. 207-1571 J [1] SEAL GP-DUO-CONE  
  214-3570 [2] RING-TORIC  
26. 227-6117 J [1] HOUSING-MOTOR  
27. 227-6118 J [1] RETAINER  
28. 227-6119 [1] CARRIER-PLANETARY  
29. 227-6123 J [2] DOWEL  
30. 227-6124 J [2] PLATE-WASHER  
31. 093-1731 [2] RING-RETAINING  
32. 095-0891 [6] PIN-SPRING  
33. 096-0433 [3] RING-RETAINING  
34. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
35. 171-9298 [1] SEAL-O-RING  
36. 179-8733 M [16] BOLT (M20X2.5X170-MM)  
37. 7M-8485 [2] SEAL-O-RING  
38. 7Y-0595 [3] SPACER (58X79.6X6-MM THK)  
39. 8T-0293 JM [4] BOLT (M12X1.75X20-MM)  
40. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
41. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
   
    AVAILABLE REPAIR KIT(S):
  227-6134 J [1] KIT-HOUSING (FINAL DRIVE)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0091 FMI 02 Incorrect Throttle Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Air Inlet Heater Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Electrical Connectors - Inspect
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0190 FMI 08 Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Fuel Filter Differential Pressure Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0091 FMI 08 Throttle Position signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Sensors and Electrical Connectors
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Pressure Sensor Open or Short Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Indicator Lamp Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0324 FMI 06 Warning Lamp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0324 FMI 05 Warning Lamp open/short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1266 FMI 05 Diagnostic Lamp current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1266 FMI 06 Diagnostic Lamp current above normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Digital Sensor Supply Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Coolant Level Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Shutdown Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Throttle Position Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Throttle Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Caterpillar Parts SIS Catalog 324D :

251-0448 WIRING GP-FAN
WIRING GP-ENGINE
330-6022 WIRING GP-ENGINE
WIRING GP-ENGINE
198-2714 WIRING GP-ENGINE
WIRING GP-CONVERTER
251-0485 WIRING GP-CONVERTER
WIRING GP-CONVERTER
251-0485 WIRING GP-CONVERTER
WIRING GP-CONVERTER
251-0482 WIRING GP-CONVERTER
WIRING GP-CONVERTER
251-0482 WIRING GP-CONVERTER
WIRING GP-CONTROL
289-1217 WIRING GP-CONTROL
WIRING GP-FINE SWING
259-4965 WIRING GP-FINE SWING
WIRING GP-FUEL SYSTEM
259-5053 WIRING GP-FUEL SYSTEM
WIRING GP-MEDIUM PRESSURE
259-4949 WIRING GP-MEDIUM PRESSURE
WIRING GP-PLATFORM
251-0430 WIRING GP-PLATFORM
WIRING GP-QUICK COUPLER
267-7643 WIRING GP-QUICK COUPLER
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
DRIVE GP-FINAL
227-6132 DRIVE GP-FINAL

Truck sale:

 
 
Caterpillar 324D
- Crawler Excavators
ZIEGLER CAT
Caterpillar 324D, Crawler Excavators, Construction
50,277 
Caterpillar 324D, Crawler Excavators, Construction

FINNING CANADA
Caterpillar 324D, Crawler Excavators, Construction
110,867 
Caterpillar 324D, Crawler Excavators, Construction
- Crawler excavators
FINNING CANADA
Caterpillar 324D, Raupenbagger, Bau-Und Bergbauausrüstung
64.613 
Caterpillar 324D, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
BERGERAT MONNOYEUR S.A.S.
 
108.233 
Caterpillar 324D, Raupenbagger, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.