AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

274-7395 SENSOR GP-TEMPERATURE S/N MHX1-UP PART OF 231-1975, 243-1555 SENSOR GP-ENGINE 345C L EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
SENSOR GP
STARTING AID GP
STARTING MOTOR GP
SWITCH GP

EXCAVATOR 345C L EXCAVATOR GPH
 345C L Hydraulic Excavator GPH00001-UP (MACHINE) POWERED BY C13 Engine SEBP4508 345C L GPH   (2006)

ELECTRICAL AND STARTING SYSTEM

SENSOR GP
SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
LINES GP-SENSOR
239-1607 LINES GP-SENSOR
LINES GP-SENSOR
239-1607 LINES GP-SENSOR
 

#SEBP45080270
 

274-7395: SENSOR GP-TEMPERATURE

274-7395 SENSOR GP-TEMPERATURE
S/N MHX1-UP
PART OF 231-1975, 243-1555 SENSOR GP-ENGINE
i02379188 SEBP4508
2747395 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 345C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 264-4297 [1] SENSOR AS-TEMPERATURE  
  137-6645 [1] PAD-CONNECTOR  
2. 238-5080 [1] SEAL-O-RING  
 

#SEBP45080271
 

274-7396: SENSOR GP-TEMPERATURE

274-7396 SENSOR GP-TEMPERATURE
S/N MHX1-UP
PART OF 231-1975, 243-1555 SENSOR GP-ENGINE
i02379131 SEBP4508
2747396 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 345C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 264-4297 [1] SENSOR AS-TEMPERATURE  
  137-6645 [1] PAD-CONNECTOR (CONNECTOR)  
2. 6V-6609 [1] SEAL-O-RING  
 

#SEBP45080272
 

222-8365: STARTING AID GP-ETHER

222-8365 STARTING AID GP-ETHER
S/N GPH1-UP
PART OF 245-5648 STARTING AID GP-ETHER
Type 1
AN ATTACHMENT
i02171294 SEBP4508
2228365 STARTING AID GP-ETHER Parts scheme 2228365 STARTING AID GP-ETHER Parts scheme
  For full view, you need register

Parts for your 345C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-2937 [1] ADAPTER-O-RING  
2. 5P-6312 [1] UNION  
3. 5P-6313 [3] NUT (5/16-24-THD)  
4. 5P-6314 [3] SLEEVE  
5. 6N-9995 [1] ATOMIZER-ETHER  
6. 7N-0140 [2] TUBE AS-COIL  
7. 7N-2059 [1] CLAMP AS  
8. 230-0917 [1] FITTING AS  
9. 233-1272 [1] PLATE AS  
10. 233-1286 [1] PLATE AS  
11. 239-1134 Y [1] VALVE GP-ETHER STARTING (24-VOLT)  
12. 255-3057 [1] TUBE  
13. 272-4789 [1] TUBE  
14. 305-4765 [1] TUBE  
15. 239-6662 [1] TUBE  
16. 1B-3581 [1] CLIP  
17. 2B-2404 [5] CLIP  
18. 3D-5102 [7] GROMMET  
19. 3J-7354 [1] SEAL-O-RING  
20. 5K-0430 [1] CLIP  
21. 7G-4498 [1] GROMMET  
22. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
24. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
25. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
26. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
27. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
28. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45080273
 

222-8365: STARTING AID GP-ETHER

222-8365 STARTING AID GP-ETHER
S/N GPH1-UP
PART OF 245-5648 STARTING AID GP-ETHER
Type 2
AN ATTACHMENT
i02963343 SEBP4508
2228365 STARTING AID GP-ETHER Parts scheme 2228365 STARTING AID GP-ETHER Parts scheme
  For full view, you need register

Parts for your 345C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5528 C [1] BUSHING-REDUCER  
2. 5P-6312 [1] UNION  
3. 5P-6313 [3] NUT (5/16-24-THD)  
4. 5P-6314 [3] SLEEVE  
5. 256-6881 C [1] ATOMIZER GP-ETHER  
  236-4545 [1] NUT-SLEEVE (5/16-24-THD)  
6. 7N-0140 [2] TUBE AS-COIL  
7. 7N-2059 [1] CLAMP AS  
8. 230-0917 [1] FITTING AS  
  236-4545 [1] NUT-SLEEVE (5/16-24-THD)  
9. 233-1272 [1] PLATE AS  
10. 233-1286 [1] PLATE AS  
11. 239-1134 Y [1] VALVE GP-ETHER STARTING (24-VOLT)  
12. 255-3057 [1] TUBE  
13. 272-4789 [1] TUBE  
14. 324-4192 [1] TUBE  
15. 239-6662 [1] TUBE  
16. 1B-3581 [1] CLIP  
17. 2B-2404 [5] CLIP  
18. 3D-5102 [7] GROMMET  
19. 6V-5048 C [1] SEAL-O-RING  
20. 5K-0430 [1] CLIP  
21. 7G-4498 [1] GROMMET  
22. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
24. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
25. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
26. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
27. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
28. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
30. 6G-2263 [1] SPACER (10.5X19X28.5-MM THK)  
31. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
   
  7N-0296 A [1] CYLINDER AS-ETHER  
    (MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER)
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45080274
 

245-5648: STARTING AID GP-ETHER

245-5648 STARTING AID GP-ETHER -COLD WEATHER
S/N GPH1-UP
AN ATTACHMENT
i02344979 SEBP4508
  For full view, you need register

Parts for your 345C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  227-7144 Y [1] BATTERY & WIRING GP (COLD WEATHER)  
  222-8365 Y [1] STARTING AID GP-ETHER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP45080275
 

269-2757: STARTING MOTOR GP-ELECTRIC

269-2757 STARTING MOTOR GP-ELECTRIC
S/N MHX1-UP
24-VOLT
PART OF 269-4977 STARTING MOTOR GP-ELECTRIC
i02289193 SEBP4508
2692757 STARTING MOTOR GP-ELECTRIC Parts scheme 2692757 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 345C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  9G-4101 [1] BUSHING-END  
  3T-3424 [1] PLUG-FELT  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 306-3998 [1] BOOT-RUBBER  
19. 9M-7609 [1] SPRING (SHIFT LEVER)  
20. 4M-1827 [1] RETAINER-SPRING  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING (EXTERNAL)  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 0S-1597 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES INSULATOR, BUSHINGS & WASHER)
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [6] NUT (10-32-THD)  
51. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
52. 3T-9494 [6] SPRING  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
54. 9G-4101 [1] BUSHING-END  
55. 3T-3424 [3] PLUG-FELT  
56. 3T-3423 [3] CUP  
57. 1M-9968 [1] BUSHING  
58. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
62. 125-6535 [1] COVER-STARTING MOTOR  
63. 7T-9123 [1] GASKET-PLATE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP45080276
 

269-4977: STARTING MOTOR GP-ELECTRIC

269-4977 STARTING MOTOR GP-ELECTRIC
S/N MHX1-UP
24-VOLT
PART OF 235-8427, 280-3646 ENGINE AR-COMPLETE
i02288775 SEBP4508
2694977 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 345C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-7869 [1] GASKET  
2. 8Y-9603 [1] CABLE AS-STARTING MOTOR  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  159-8050 E CABLE (00-GA, BLACK)(28-CM)  
3. 269-2757 Y [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
4. 176-2543 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP45080277
 

348-7651: STARTING MOTOR GP-ELECTRIC

348-7651 STARTING MOTOR GP-ELECTRIC
S/N MHX1-UP
i04229553 SEBP4508
3487651 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 345C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 7T-3974 [1] HOUSING AS-DRIVE  
25. 6N-3826 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS (STARTING MOTOR)  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
41. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
57. 125-6535 [1] COVER-STARTING MOTOR  
58. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP45080278
 

547-7976: SWITCH & WIRE GP-FUEL LEVEL

547-7976 SWITCH & WIRE GP-FUEL LEVEL
S/N GPH1-UP
FUEL LEVEL SWITCH KIT
PART OF 5C-6108 SWITCH GP-REFUELING
AN ATTACHMENT
i07202495 SEBP4508
  For full view, you need register

Parts for your 345C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  3S-2093 [18] STRAP-CABLE  
  418-6596 [1] SWITCH AS-LIQUID LEVEL  
  3T-4696 [1] TERMINAL-RING (10-GA TO 12-GA, 7/16-IN SCREW)  
  6A-3361 H WIRE-ELECTRICAL (16-GA)(60-DM)  
  H   ORDER BY THE DECIMETER
 

#SEBP45080279
 

7N-0719: SWITCH GP-DISCONNECT

7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N GPH1-UP
PART OF 224-2906 PANEL GP-CIRCUIT BREAKER
i00762190 SEBP4508
7N0719 SWITCH GP-DISCONNECT Parts scheme
  For full view, you need register

Parts for your 345C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-5306 [1] KEY (BATTERY DISCONNECT)  
2. 8H-5303 [1] NUT (3/4-16-THD)  
3. 2H-3922 [2] LOCKWASHER  
4. 9F-5644 [2] LOCKWASHER  
5. 6F-7045 [2] NUT-FULL (3/8-24-THD)  
 

Information:

Special Instruction
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Failure Of Water In Fuel Separator (WIF) Sensor On Certain CAT Products{1263, 1439}
Failure Of Water In Fuel Separator (WIF) Sensor On Certain CAT Products{1263, 1439}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Specifications
Engine Oil Pressure Sensor
C11 and C13 Engines
Coolant Temperature Sensor
C11 and C13 Engines
Atmospheric Pressure Sensor
C11 and C13 Engines
Engine Oil Pressure Sensor
C11 and C13 Engines
Inlet Manifold Temperature Sensor
C11 and C13 Engines
Inlet Manifold Air Pressure Sensor
C11 and C13 Engines
Atmospheric Pressure Sensor
C11 and C13 Engines
Engine Oil Pressure Sensor
C11 and C13 Engines
Atmospheric Pressure Sensor
C11 and C13 Engines
Fuel Temperature Sensor
C11 and C13 Engines
Atmospheric Pressure Sensor
C11 and C13 Engines
Engine Oil Pressure Sensor
C11 and C13 Engines
Coolant Temperature Sensor
C11 and C13 Engines
Fuel Temperature Sensor
C11 and C13 Engines
Inlet Manifold Temperature Sensor
C11 and C13 Engines
Engine Oil Pressure Sensor
C11 and C13 Engines
Inlet Manifold Air Pressure Sensor
C11 and C13 Engines
Engine Oil Pressure Sensor
C11 and C13 Engines
Atmospheric Pressure Sensor
C11 and C13 Engines
Speed/Timing Sensor
C11 and C13 Engines
Fuel Temperature Sensor
C11 and C13 Engines
Sensor Lines (Overload Warning)
345C Excavator Machine System Specifications
Liquid Level Sensor (Water Separator)
C11 and C13 Engines
Liquid Level Sensor (Water Separator)
C11 and C13 Engines
Coolant Temperature Sensor
C11 and C13 Engines
Speed/Timing Sensor
C11 and C13 Engines
Coolant Temperature Sensor
C11 and C13 Engines
Fuel Temperature Sensor
C11 and C13 Engines
Speed/Timing Sensor
C11 and C13 Engines
Fuel Pressure Sensor
C11 and C13 Engines
Atmospheric Pressure Sensor
C11 and C13 Engines
Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
C11 and C13 Engines
Speed/Timing Sensor
C11 and C13 Engines
Inlet Manifold Air Pressure Sensor
C11 and C13 Engines
Speed/Timing Sensor
C11 and C13 Engines
Speed/Timing Sensor
C11 and C13 Engines
Speed/Timing Sensor
C11 and C13 Engines
Fuel Pressure Sensor
C11 and C13 Engines
Speed/Timing Sensor
C11 and C13 Engines
Inlet Manifold Air Pressure Sensor
C11 and C13 Engines
Inlet Manifold Temperature Sensor
C11 and C13 Engines
Engine Oil Pressure Sensor
C11 and C13 Engines
Speed/Timing Sensor
C11 and C13 Engines
Inlet Manifold Temperature Sensor
C11 and C13 Engines
Fuel Temperature Sensor
C11 and C13 Engines
Atmospheric Pressure Sensor
C11 and C13 Engines
Speed/Timing Sensor
C11 and C13 Engines
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Sensors
345C Excavator Tool Control System
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Testing and Adjusting
Angle Sensor - Calibrate - AS300 System
AccuGrade® GPS (CD700)
Angle Sensor - Calibrate - PSC System
AccuGrade® GPS (CD700)
Angle Sensor - Calibrate - AS300/AS450 System
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Excavator Arm Sensors - Calibrate - PSC System
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Troubleshooting
CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 0261 FMI 13 Engine Timing Calibration required
C11 and C13 Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines
Engine Speed/Timing Sensor Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
C11 and C13 Engines for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
Engine Speed/Timing Sensor - Calibrate
C11 and C13 Engines for Caterpillar Built Machines
MID 106 - CID 1609 - FMI 03
345C Excavator Tool Control System
MID 106 - CID 1609 - FMI 04
345C Excavator Tool Control System
MID 106 - CID 1609 - FMI 08
345C Excavator Tool Control System
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines
CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Sensor Signal (Analog, Active) - Test
C11 and C13 Engines for Caterpillar Built Machines
Sensor Supply - Test
C11 and C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Boost Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Inlet Air Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Atmospheric Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Camshaft Position Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft Position Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
Troubleshooting the "Water Separator Has Water" Warning Message {1263, 1439}
2014/08/13
Preventing Oil Leaks from the Pressure Sensors on the Main Hydraulic Pump {5057, 5070}
2007/04/02
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
A New Angle Sensor is Now Available for AccuGrade and CAES Systems on Excavators {1439, 5953}
2009/03/16
New Liquid Level Sensor Gp Is Now Used as Service Replacement on Certain Cat Products {1263, 7422}
2015/08/18

Caterpillar Parts SIS Catalog 345C L :

SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
197-8391 SENSOR GP-TEMPERATURE
SENSOR GP-SPEED
318-1181 SENSOR GP-SPEED
SENSOR GP-SPEED
300-9806 SENSOR GP-SPEED
SENSOR GP-SPEED
300-9805 SENSOR GP-SPEED
SENSOR GP-SPEED
239-2397 SENSOR GP-SPEED
SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
STARTING AID GP-ETHER
222-8365 STARTING AID GP-ETHER
STARTING AID GP-ETHER
222-8365 STARTING AID GP-ETHER
245-5648 STARTING AID GP-ETHER
STARTING MOTOR GP-ELECTRIC
269-2757 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
269-4977 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
348-7651 STARTING MOTOR GP-ELECTRIC
547-7976 SWITCH & WIRE GP-FUEL LEVEL

Truck sale:

Caterpillar 345C L
 
Caterpillar 345C L
- Crawler Excavators
OHIO CAT
Caterpillar 345CL P, Crawler Excavators, Construction
79,900 
Caterpillar 345CL P, Crawler Excavators, Construction
- Crawler Excavators
MICHIGAN CAT
 
55,560 
Caterpillar 345CL, Crawler Excavators, Construction


Caterpillar 345CL, Crawler Excavators, Construction
80,000 
Caterpillar 345CL, Crawler Excavators, Construction

WAGNER EQUIPMENT CO
Caterpillar 345CL
 
Caterpillar 345CL

ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.