AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

272-2253 WIRING GP-CAB -FUSE, RELAY S/N EDF1-1999 PART OF 264-0660 OPERATOR AR M325D MH EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP

EXCAVATOR M325D MH EXCAVATOR EDF
 M325D Material Handler EDF00001-01999 (MACHINE) POWERED BY C-7 Engine SEBP4510 M325D MH EDF   (2006)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-BOOM FLOAT
251-0439 WIRING GP-BOOM FLOAT
WIRING GP-CAB
272-2252 WIRING GP-CAB
WIRING GP-CAB
272-2253 WIRING GP-CAB
WIRING GP-CAB
284-8650 WIRING GP-CAB
WIRING GP-CAB
284-8652 WIRING GP-CAB
WIRING GP-CAB
284-8654 WIRING GP-CAB
 

#SEBP45100330
 

272-2253: WIRING GP-CAB

272-2253 WIRING GP-CAB -FUSE, RELAY
S/N EDF1-1999
PART OF 264-0660 OPERATOR AR
i02422245 SEBP4510
2722253 WIRING GP-CAB Parts scheme 2722253 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8016 [1] RESISTOR AS (BACKUP)(BACKUP)  
2. 113-8490 [13] FUSE (10-AMPERE)  
3. 113-8491 [12] FUSE (15-AMPERE)  
4. 113-8493 [2] FUSE (25-AMPERE)  
5. 124-3548 [2] FUSE (30-AMPERE)  
6. 141-2759 [8] FUSE (5-AMPERE)  
7. 161-3128 [1] RELAY (24-VOLT)(BOOM FLOODLIGHT)  
7A. 161-3128 [1] RELAY (24-VOLT)(HORN)  
7B. 161-3128 [1] RELAY (24-VOLT)(MATERIAL HANDLER LOCK CANCEL)  
7C. 161-3128 [1] RELAY (24-VOLT)(HYD CAB RISER SPEED LIMIT)  
7D. 161-3128 [1] RELAY (24-VOLT)(GRAPPLE)  
7E. 161-3128 [1] RELAY (24-VOLT)(WIPER)  
8. 170-6888 [1] PULLER-FUSE  
9. 241-8368 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY)  
10. 346-5495 [1] RELAY AS (24-VOLT)(WIPER)  
11. 274-5413 [1] HARNESS AS-CAB  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  7Y-3950 [2] TERMINAL-BLADE (14-GA TO 20-GA)(MALE)  
  7Y-3951 [3] TERMINAL-BLADE (14-GA)(FEMALE)  
  7Y-3952 [2] PLUG-CONNECTOR (2-PIN)  
  7Y-3963 [1] TERMINAL-BULLET (FEMALE)(FEMALE)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [3] PLUG-SEAL  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  102-7964 [2] PLUG-CONNECTOR (16-PIN)  
  111-4815 [1] PLUG-CONNECTOR (7-PIN)  
  116-0255 [1] TERMINAL-BLADE (10-GA TO 20-GA)(FEMALE)  
  119-3662 BE TUBE-HEAT SHRINK (10.85-MM DIA)  
  102-7965 [49] TERMINAL (FEMALE)  
  124-0010 [5] TERMINAL (12-GA TO 16-GA)  
  125-4841 [2] WEDGE-PLUG LOCK (21-PIN)  
  125-4838 [1] WEDGE-PLUG LOCK (7-PIN)  
  125-7874 BE TUBE-HEAT SHRINK (5.72-MM DIA)  
  125-7875 BE TUBE-HEAT SHRINK (7.44-MM DIA)  
  9X-3402 [9] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [9] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8067 [1] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8050 [1] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
    -OR-
  2L-8058 [1] TERMINAL-RING (8-GA, 1/4-IN SCREW)  
  134-3296 [1] HOUSING-PLUG  
  134-3297 [1] SEAL  
  149-5069 [13] TERMINAL-BLADE (14-GA TO 20-GA)(FEMALE)  
  149-5070 [19] TERMINAL-BLADE (16-GA TO 20-GA)(FEMALE)  
  149-5071 [4] TERMINAL-BLADE (12-GA TO 14-GA)(FEMALE)  
  153-2602 [2] RECEPTACLE-CONNECTOR (1-PIN)  
  153-2631 [2] TERMINAL (14-GA TO 20-GA)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  163-6803 [1] PLUG-CONNECTOR (5-PIN)  
  167-3487 [1] WEDGE-PLUG LOCK (5-PIN)  
  170-6890 [11] TERMINAL-BLADE (14-GA)  
  170-6891 [18] TERMINAL-BLADE (16-GA TO 18-GA)  
  179-9046 [1] TERMINAL (14-GA TO 20-GA)  
  189-3158 [2] SUPPRESSOR-ARC  
  230-4009 [1] PLUG AS-CONNECTOR (12-PIN)  
  238-2319 [1] BASE AS (FUSE, RELAY PANEL)  
  9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
  170-9394 [40] TERMINAL  
  238-2363 [4] TERMINAL (FEMALE)  
12. 280-1375 [1] WIRE AS  
13. 280-1376 [1] WIRE AS  
14. 095-0742 M [4] SCREW-MACHINE (M6X1X16-MM)  
15. 096-0061 B [3] STRAP-CABLE  
16. 132-5789 [1] CLIP (LADDER)  
17. 5C-2890 M [2] NUT (M6X1-THD)  
18. 6V-7357 M [2] BOLT (M6X1X25-MM)  
19. 7X-2619 M [1] BOLT (M6X1X10-MM)  
20. 8T-0087 [1] LOCKWASHER  
21. 8T-0286 M [1] BOLT (M5X0.8X8-MM)  
22. 8T-4171 M [2] BOLT (M6X1X12-MM)  
23. 9X-2042 M [1] SCREW-TRUSS HEAD (M6X1X12-MM)  
24. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45100331
 

284-8650: WIRING GP-CAB

284-8650 WIRING GP-CAB -BOOM FLOAT
S/N EDF1-1999
PART OF 286-4714 CONTROL AR-BOOM
AN ATTACHMENT
i02476883 SEBP4510
2848650 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-5050 [1] RELAY (24-VOLT)(BOOM FLOAT, DISABLE)  
1A. 149-5050 [1] RELAY (24-VOLT)(BOOM FLOAT UP)  
2. 161-3128 [1] RELAY (24-VOLT)(BOOM FLOAT DOWN)  
3. 236-3941 [1] SWITCH AS-ROCKER (SMARTBOOM)(BOOM FLOAT)  
  111-7899 [1] GASKET  
4. 284-8649 [1] HARNESS AS-CAB  
  163-6803 [2] PLUG-CONNECTOR (5-PIN)  
5. 096-0061 B [3] STRAP-CABLE  
6. 8T-0286 M [2] BOLT (M5X0.8X8-MM)  
7. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP45100332
 

284-8652: WIRING GP-CAB

284-8652 WIRING GP-CAB -MAGNET
S/N EDF1-1999
PART OF 279-5078 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
i02587085 SEBP4510
2848652 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 145-8054 [1] HARNESS AS-MONITOR (GENERATOR)  
  8T-8730 [12] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8729 [12] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2. 149-5050 [1] RELAY (24-VOLT)(MAGNET LIFT)  
2A. 149-5050 [1] RELAY (24-VOLT)(MAGNET OPERATION LOCK)  
3. 161-3128 [1] RELAY (24-VOLT)(MAGNET)  
4. 347-0570 [1] MONITOR (GENERATOR SET)  
5. 193-9066 [1] SWITCH AS-ROCKER (GENERATOR)  
  111-7899 [1] GASKET  
6. 261-0984 [1] BRACKET AS  
7. [1] HARNESS AS-CAB (GENERATOR)  
  149-5051 [3] CONNECTOR-RECEPTACLE  
  111-4815 [1] PLUG-CONNECTOR (7-PIN)  
  163-6803 [1] PLUG-CONNECTOR (5-PIN)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [2] PLUG-SEAL  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2L-8067 [1] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  102-7965 [9] TERMINAL (FEMALE)  
  149-5069 [6] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [8] TERMINAL-BLADE (16-GA TO 20-GA)  
  121-1173 [5] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
8. 096-0061 B [9] STRAP-CABLE  
9. 8C-9660 [2] WASHER (4.6X7.9X0.8-MM THK)  
10. 8T-0286 M [2] BOLT (M5X0.8X8-MM)  
11. 162-2165 M [2] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
12. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP45100333
 

284-8654: WIRING GP-CAB

284-8654 WIRING GP-CAB -MAGNET
S/N EDF1-1999
PART OF 293-1901, 293-1903 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
i02973927 SEBP4510
2848654 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-5050 [1] RELAY (24-VOLT)(MAGNET)  
2. 193-9066 [1] SWITCH AS-ROCKER (GENERATOR)  
  111-7899 [1] GASKET  
3. 241-8368 Y [1] SWITCH GP-MAGNETIC (24-VOLT)  
4. 261-0984 [1] BRACKET AS  
5. 261-4703 [1] MODULE GP-TIMER (MATERIAL DROP)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  261-4706 [1] KNOB  
6. 284-8653 [1] HARNESS AS-CAB  
7. 287-7422 [1] HARNESS AS-WIRING  
8. 162-2165 M [2] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
9. 3S-2093 B [8] STRAP-CABLE  
10. 8T-0286 M [1] BOLT (M5X0.8X8-MM)  
11. 9X-2032 M [2] NUT-WELD (M4X0.7-THD)  
12. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45100334
 

337-5796: WIRING GP-CAB

337-5796 WIRING GP-CAB
S/N EDF1-1999
PART OF 344-5443, 344-5446 CAB GP
AN ATTACHMENT
i03820196 SEBP4510
3375796 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
2. 132-1829 Y [1] ALARM GP (24-VOLT)(FAULT)  
3. 167-3593 [1] STRAP  
4. 193-9057 D [1] SWITCH AS-ROCKER (HEADLIGHT)  
5. 193-9065 [1] SWITCH AS-ROCKER (WARNING BEACON)  
    (EACH SWITCH AS INCLUDES)
  111-7899 [1] GASKET  
6. 238-2318 [1] LIGHTER AS-CIGAR (24-VOLT)  
7. 274-5466 Y [1] ELECTRONICS GP-MACHINE (SOFT SWITCH PANEL)  
8. 275-4975 [1] SWITCH AS-ROCKER (FINE SWING)  
  111-7899 [1] GASKET  
9. 362-0288 [1] KIT-SERVICE METER  
    (INCLUDES SERVICE METER & FILM)
10. 337-5797 [1] HARNESS AS-CAB  
  111-7898 [1] CONNECTOR (8-PIN)  
  142-9117 [1] CONNECTOR (10-PIN)  
  9G-1906 [1] CONNECTOR AS  
  3M-6018 [1] TERMINAL  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M)  
  7Y-3952 [1] PLUG-CONNECTOR (2-PIN)  
  121-1168 [2] CONNECTOR-RECEPTACLE  
  128-8950 [1] CONNECTOR-RECEPTACLE  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2267 [2] PLUG AS-CONNECTOR (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4009 [2] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  264-7034 [1] SEAL-CONNECTOR  
  239-7356 [1] PLUG AS-CONNECTOR (12-PIN)  
  264-7034 [1] SEAL-CONNECTOR  
  8T-8737 [15] PLUG-SEAL  
  134-2540 [2] RECEPTACLE AS-CONNECTOR (3-PIN)  
  9W-1951 [1] RECEPTACLE-CONNECTOR (9-PIN)  
  8T-8730 [19] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [23] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8L-8413 [14] STRAP-CABLE (WHITE)  
  5W-1987 [37] TERMINAL-BLADE (12-GA TO 16-GA)  
  183-7754 [4] TERMINAL (16-AMPERE)  
  128-4168 [1] TERMINAL AS  
  6V-9023 E TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM)  
  128-4178 [1] TERMINAL AS  
  2L-8075 [4] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  7Y-3951 [1] TERMINAL-BLADE (14-GA)  
  121-1173 [52] TERMINAL (MALE)  
  238-2366 [15] TERMINAL (MALE)  
  119-3662 [20] TUBE-HEAT SHRINK (10.85-MM DIA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(65-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)  
11. 095-0723 M [3] SCREW-SPECIAL (M3X0.5X10-MM)  
12. 6V-9498 [3] WASHER-HARD (3.2X7X0.5-MM THK)  
13. 1H-3244 [1] LOCKWASHER  
14. 3F-9556 [1] LOCKWASHER  
15. 3S-2093 B [10] STRAP-CABLE  
16. 5C-7261 M [1] NUT (M8X1.25-THD)  
17. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
18. 9X-2042 M [1] SCREW-TRUSS HEAD (M6X1X12-MM)  
19. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45100335
 

345-3422: WIRING GP-CAB

345-3422 WIRING GP-CAB -LIGHTS
S/N EDF1-1999
PART OF 344-5443, 344-5446 CAB GP
AN ATTACHMENT
i03820402 SEBP4510
3453422 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-9121 [1] BRACKET AS-LAMP  
2. 6C-9122 [2] LAMP (24-VOLT)(DOME LIGHT)  
3. 120-5967 [1] SOCKET-WIRING  
4. 240-8786 [1] ANTENNA AS  
5. 345-3423 [1] HARNESS AS-FRONT LIGHTING  
  123-7615 [1] CONNECTOR (1-PIN)  
  213-8350 [1] CONNECTOR AS  
  213-8351 [1] CONNECTOR AS  
  8T-8729 [10] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4010 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  8T-8730 [12] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  1P-0810 B TAPE-ELECTRICAL  
  5W-1987 [2] TERMINAL-BLADE (12-GA TO 16-GA)  
  179-9046 [2] TERMINAL (14-GA TO 20-GA)  
  206-3967 [7] TERMINAL  
  7Y-3966 [1] TERMINAL AS  
  7Y-3962 [1] TERMINAL-BULLET (MALE)  
  7Y-3964 [1] TUBE (CONNECTOR TERMINAL)  
  7Y-3967 [1] TERMINAL AS  
  7Y-3963 [1] TERMINAL-BULLET (FEMALE)  
  7Y-3965 [1] TUBE (RECEPTACLE TERMINAL)  
  2L-8075 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM)  
6. 3S-2093 B [2] STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP45100336
 

271-2675: WIRING GP-CAB RISER

271-2675 WIRING GP-CAB RISER
S/N EDF1-299
PART OF 300-1082 RISER AR-CAB
i02422193 SEBP4510
2712675 WIRING GP-CAB RISER Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-4838 [6] CLIP  
2. 111-4839 B [6] STRAP  
3. 120-5967 [1] SOCKET-WIRING  
4. 132-1805 [1] STRAP AS-GROUND  
5. 219-5762 [1] HARNESS AS-SENSOR (TRAVEL PEDAL POSITION)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  114-8843 E SLEEVE-PLASTIC (40-CM)  
6. 273-2051 [1] HARNESS AS-SENSOR (AUTOMATIC ENGINE SPEED CONTROL)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  117-3188 [2] COVER  
7. 274-6056 [1] HARNESS AS-CHASSIS (CAB RISER)  
  243-4510 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  104-7622 [1] RECEPTACLE  
  102-7964 [1] PLUG-CONNECTOR (16-PIN)  
  111-4815 [1] PLUG-CONNECTOR (7-PIN)  
  121-1168 [1] CONNECTOR-RECEPTACLE  
  123-7615 [1] CONNECTOR (1-PIN)  
  134-3296 [1] HOUSING-PLUG  
  134-3297 [2] SEAL  
  153-2620 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  163-6759 [1] SEAL  
  230-4009 [1] PLUG AS-CONNECTOR (12-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2265 [2] KIT-CONNECTING PLUG (8-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)  
8. 274-6058 [1] HARNESS AS-SOLENOID (LOCKOUT)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
9. 096-0061 [15] STRAP-CABLE  
10. 3F-9556 [1] LOCKWASHER  
11. 5C-7261 M [1] NUT (M8X1.25-THD)  
12. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
15. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
16. 3S-2093 [2] STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP45100337
 

286-2316: WIRING GP-CAB RISER

286-2316 WIRING GP-CAB RISER -SMARTBOOM
S/N EDF1-1999
PART OF 286-4714 CONTROL AR-BOOM
AN ATTACHMENT
i02476885 SEBP4510
2862316 WIRING GP-CAB RISER Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 274-7159 [1] HARNESS AS-SENSOR  
  230-5008 [1] PLUG AS-CONNECTOR (4-PIN)  
2. 096-0061 B [15] STRAP-CABLE  
  B   USE AS REQUIRED
 

#SEBP45100338
 

311-2223: WIRING GP-CAB RISER

311-2223 WIRING GP-CAB RISER
S/N EDF300-1999
PART OF 326-7858 RISER AR-CAB
i03444107 SEBP4510
3112223 WIRING GP-CAB RISER Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 111-4838 [6] CLIP  
3. 111-4839 B [6] STRAP  
4. 120-5967 [1] SOCKET-WIRING  
5. 132-1805 [1] STRAP AS-GROUND  
6. 219-5762 [1] HARNESS AS-SENSOR (TRAVEL PEDAL POSITION)  
7. 311-2224 [1] HARNESS AS-CAB  
8. 096-0061 [15] STRAP-CABLE  
9. 3F-9556 [1] LOCKWASHER  
10. 5C-7261 M [1] NUT (M8X1.25-THD)  
11. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
12. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
14. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP45100339
 

333-1344: WIRING GP-CAMERA

333-1344 WIRING GP-CAMERA -REAR VIEW
S/N EDF1-1999
PART OF 351-0749 CAMERA AR
AN ATTACHMENT
i03384231 SEBP4510
3331344 WIRING GP-CAMERA Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [22] STRAP-CABLE  
2. 7K-1181 [6] STRAP-CABLE  
3. 268-8643 [1] CABLE AS (6-M)  
4. 4P-7581 [1] CLIP (LADDER)  
5. 5C-7261 M [1] NUT (M8X1.25-THD)  
6. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
7. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0091 FMI 02 Incorrect Throttle Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Air Inlet Heater Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Electrical Connectors - Inspect
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0190 FMI 08 Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Fuel Filter Differential Pressure Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0091 FMI 08 Throttle Position signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Sensors and Electrical Connectors
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Pressure Sensor Open or Short Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Indicator Lamp Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0324 FMI 06 Warning Lamp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0324 FMI 05 Warning Lamp open/short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1266 FMI 05 Diagnostic Lamp current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1266 FMI 06 Diagnostic Lamp current above normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Digital Sensor Supply Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Coolant Level Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Shutdown Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Throttle Position Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Throttle Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Caterpillar Parts SIS Catalog M325D MH :

WIRING GP-CAB
272-2252 WIRING GP-CAB
WIRING GP-BOOM FLOAT
251-0439 WIRING GP-BOOM FLOAT
VALVE GP-ETHER STARTING
239-1134 VALVE GP-ETHER STARTING
SWIVEL GP-ELECTRIC
364-2801 SWIVEL GP-ELECTRIC
SWIVEL GP-ELECTRIC
249-6923 SWIVEL GP-ELECTRIC
SWITCH GP-WIPER
252-1225 SWITCH GP-WIPER
SWITCH GP-WIPER
252-1225 SWITCH GP-WIPER
SWITCH GP-TOGGLE
165-5970 SWITCH GP-TOGGLE
WIRING GP-CAB
284-8650 WIRING GP-CAB
WIRING GP-CAB
284-8652 WIRING GP-CAB
WIRING GP-CAB
284-8654 WIRING GP-CAB
WIRING GP-CAB
337-5796 WIRING GP-CAB
WIRING GP-CAB
345-3422 WIRING GP-CAB
WIRING GP-CAB RISER
271-2675 WIRING GP-CAB RISER
WIRING GP-CAB RISER
286-2316 WIRING GP-CAB RISER
WIRING GP-CAB RISER
311-2223 WIRING GP-CAB RISER

Truck sale:

CATERPILLAR M325D MH 2011
 
CATERPILLAR M325D MH 2011
- TRACK EXCAVATORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
2011 CAT M325D MH
Call 
2011 CAT M325D MH

TOROMONT CAT - Main
TORONTO, Ontario, Canada
2009 CAT M325D MH
Call 
2009 CAT M325D MH

Process Inc.
Bellevue, Washington
 
$105,324 USD 
CATERPILLAR M325DMH 2008
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
2007 CAT M325D MH
Call 
2007 CAT M325D MH

Process Inc.
Bellevue, Washington
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.