AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

291-7460 WIRING GP-FAN -CLUTCH S/N EDF1-1999 PART OF 251-0448 WIRING GP-FAN M325D MH EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP

EXCAVATOR M325D MH EXCAVATOR EDF
 M325D Material Handler EDF00001-01999 (MACHINE) POWERED BY C-7 Engine SEBP4510 M325D MH EDF   (2006)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-ENGINE
330-6022 WIRING GP-ENGINE
251-0448 WIRING GP-FAN
WIRING GP-FAN
291-7460 WIRING GP-FAN
WIRING GP-FINE SWING
259-4965 WIRING GP-FINE SWING
308-3656 WIRING GP-FUEL PUMP
WIRING GP-FUEL SYSTEM
259-5053 WIRING GP-FUEL SYSTEM
 

#SEBP45100350
 

291-7460: WIRING GP-FAN

291-7460 WIRING GP-FAN -CLUTCH
S/N EDF1-1999
PART OF 251-0448 WIRING GP-FAN
i02625587 SEBP4510
2917460 WIRING GP-FAN Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [9] STRAP-CABLE  
2. 116-0118 [1] CLIP  
3. 275-6911 [1] HARNESS AS-CONTROL  
4. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
  M   METRIC PART
 

#SEBP45100351
 

259-4965: WIRING GP-FINE SWING

259-4965 WIRING GP-FINE SWING
S/N EDF1-1999
PART OF 266-2100, 326-7854 CHASSIS AR
i02296363 SEBP4510
2594965 WIRING GP-FINE SWING Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-8109 [1] BRACKET AS  
2. 111-4836 [6] CLIP  
3. 111-4837 [2] CLIP  
4. 291-7551 [1] HARNESS AS-MOTOR (SWING MOTOR CONTROL)  
  103-2529 E HOSE (72-CM)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
5. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
7. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP45100352
 

308-3656: WIRING GP-FUEL PUMP

308-3656 WIRING GP-FUEL PUMP
S/N EDF1-1999
PART OF 308-6572 PUMP AR-FUEL TRANSFER
AN ATTACHMENT
i03022836 SEBP4510
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  301-0209 [1] WIRING GP-CAB  
  161-3128 [1] RELAY (24-VOLT)(PRIMING PUMP)  
  301-0190 [1] WIRING GP-CAB RISER  
  096-0061 B [10] STRAP-CABLE  
  301-0191 [1] HARNESS AS  
  B   USE AS REQUIRED
 

#SEBP45100353
 

259-5053: WIRING GP-FUEL SYSTEM

259-5053 WIRING GP-FUEL SYSTEM -PRIMING PUMP
S/N EDF1-1999
PART OF 308-6572 PUMP AR-FUEL TRANSFER
AN ATTACHMENT
i02301743 SEBP4510
2595053 WIRING GP-FUEL SYSTEM Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
2. 7K-1181 [7] STRAP-CABLE  
3. 137-6606 [1] FILM-IDENTIFICATION (FUEL)  
4. 165-5970 Y [1] SWITCH GP-TOGGLE (FUEL PRIMING PUMP)  
5. 267-7967 [1] HARNESS AS-PUMP (FUEL)  
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  9W-0852 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP45100354
 

273-6400: WIRING GP-HYDRAULIC GENERATOR

273-6400 WIRING GP-HYDRAULIC GENERATOR -CABLE
S/N EDF1-1999
PART OF 279-5078 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
i02471485 SEBP4510
2736400 WIRING GP-HYDRAULIC GENERATOR Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 194-0463 [1] CABLE AS  
   
  7K-1181 BF [10] STRAP-CABLE  
  B   USE AS REQUIRED
  F   NOT SHOWN
 

#SEBP45100355
 

279-5120: WIRING GP-HYDRAULIC GENERATOR

279-5120 WIRING GP-HYDRAULIC GENERATOR -ELECTRONIC DISPLAY
S/N EDF1-1999
PART OF 279-5078, 285-0992 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
i02471448 SEBP4510
2795120 WIRING GP-HYDRAULIC GENERATOR Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 260-1935 [1] HARNESS AS-CONTROL  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(13-CM)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  173-5453 E CABLE (393-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP45100356
 

292-3509: WIRING GP-HYDRAULIC GENERATOR

292-3509 WIRING GP-HYDRAULIC GENERATOR -MAGNET
S/N EDF1-1999
PART OF 293-1901, 293-1903 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
i02973938 SEBP4510
2923509 WIRING GP-HYDRAULIC GENERATOR Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 B [32] STRAP-CABLE  
2. 151-6308 [1] FILM-IDENTIFICATION (MAGNET)  
3. 242-1974 [1] LAMP AS (MAGNET ON/OFF)  
4. 292-3507 [1] HARNESS AS-WIRING  
5. 292-3508 [1] HARNESS AS-POWER  
  B   USE AS REQUIRED
 

#SEBP45100357
 

293-5811: WIRING GP-HYDRAULIC GENERATOR

293-5811 WIRING GP-HYDRAULIC GENERATOR
S/N EDF1-1999
PART OF 293-1901, 293-1903 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
i02976069 SEBP4510
2935811 WIRING GP-HYDRAULIC GENERATOR Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 237-5170 [1] PLATE  
2. 237-5172 [1] BRACKET  
3. 241-8747 [1] PLUG AS-CONNECTOR  
4. 241-8748 [1] PLUG AS-CONNECTOR  
5. 242-8153 [1] CABLE AS  
  2L-8054 [4] TERMINAL-RING (6-GA, 1/2-IN SCREW)  
    -OR-
  2L-8061 [4] TERMINAL-RING (8-GA, 1/2-IN SCREW)  
  6V-9023 BE TUBE-HEAT SHRINK (12.7-MM DIA)  
6. 096-0061 B [7] STRAP-CABLE  
7. 7C-4354 [26] CLIP  
8. 7X-2535 M [2] BOLT (M6X1X60-MM)  
9. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4133 M [15] NUT (M10X1.5-THD)  
11. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
12. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
13. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP45100358
 

302-5161: WIRING GP-HYDRAULIC GENERATOR

302-5161 WIRING GP-HYDRAULIC GENERATOR
S/N EDF1-1999
PART OF 279-5078 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
i03387562 SEBP4510
3025161 WIRING GP-HYDRAULIC GENERATOR Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-9699 [1] BRACKET AS  
2. 317-9124 [1] CABLE AS  
  2L-8052 [1] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [1] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)  
3. 228-2775 [1] CLIP  
4. 096-0061 B [7] STRAP-CABLE  
5. 7C-4354 [31] CLIP  
6. 8T-4121 [21] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4133 M [20] NUT (M10X1.5-THD)  
8. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP45100359
 

259-4949: WIRING GP-MEDIUM PRESSURE

259-4949 WIRING GP-MEDIUM PRESSURE
S/N EDF1-222
PART OF 266-2100 CHASSIS AR
i02303619 SEBP4510
2594949 WIRING GP-MEDIUM PRESSURE Parts scheme
  For full view, you need register

Parts for your M325D MH EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [5] STRAP-CABLE  
2. 7K-1181 [5] STRAP-CABLE  
3. 102-7886 [1] SPACER (11X20X80-MM THK)  
4. 267-8019 [1] HARNESS AS-VALVE  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [1] STRAP-CABLE  
  8T-8737 [3] PLUG-SEAL  
  125-7874 BE TUBE-HEAT SHRINK (5.72-MM DIA)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
5. 132-5789 [1] CLIP (LADDER)  
6. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4198 M [1] BOLT (M10X1.5X100-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0091 FMI 02 Incorrect Throttle Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Air Inlet Heater Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Electrical Connectors - Inspect
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0190 FMI 08 Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Fuel Filter Differential Pressure Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0091 FMI 08 Throttle Position signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Sensors and Electrical Connectors
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Pressure Sensor Open or Short Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Indicator Lamp Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0324 FMI 06 Warning Lamp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0324 FMI 05 Warning Lamp open/short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1266 FMI 05 Diagnostic Lamp current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1266 FMI 06 Diagnostic Lamp current above normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Digital Sensor Supply Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Coolant Level Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Shutdown Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Throttle Position Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Throttle Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Caterpillar Parts SIS Catalog M325D MH :

251-0448 WIRING GP-FAN
WIRING GP-ENGINE
330-6022 WIRING GP-ENGINE
WIRING GP-ENGINE
198-2714 WIRING GP-ENGINE
WIRING GP-CONSOLE
269-4249 WIRING GP-CONSOLE
WIRING GP-COMMUNICATION
267-7752 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
267-7752 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
267-7751 WIRING GP-COMMUNICATION
WIRING GP-CHASSIS
293-4308 WIRING GP-CHASSIS
WIRING GP-FINE SWING
259-4965 WIRING GP-FINE SWING
308-3656 WIRING GP-FUEL PUMP
WIRING GP-FUEL SYSTEM
259-5053 WIRING GP-FUEL SYSTEM
WIRING GP-HYDRAULIC GENERATOR
273-6400 WIRING GP-HYDRAULIC GENERATOR
WIRING GP-HYDRAULIC GENERATOR
279-5120 WIRING GP-HYDRAULIC GENERATOR
WIRING GP-HYDRAULIC GENERATOR
292-3509 WIRING GP-HYDRAULIC GENERATOR
WIRING GP-HYDRAULIC GENERATOR
293-5811 WIRING GP-HYDRAULIC GENERATOR
WIRING GP-HYDRAULIC GENERATOR
302-5161 WIRING GP-HYDRAULIC GENERATOR

Truck sale:

CATERPILLAR M325D MH 2011
 
CATERPILLAR M325D MH 2011
- TRACK EXCAVATORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
2011 CAT M325D MH
Call 
2011 CAT M325D MH

TOROMONT CAT - Main
TORONTO, Ontario, Canada
2009 CAT M325D MH
Call 
2009 CAT M325D MH

Process Inc.
Bellevue, Washington
 
$105,324 USD 
CATERPILLAR M325DMH 2008
- WHEEL EXCAVATORS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
2007 CAT M325D MH
Call 
2007 CAT M325D MH

Process Inc.
Bellevue, Washington
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.