Parts group 325D L:
WORK TOOLS
BUCKET GP
COUPLER GP-QUICK
GROUND ENGAGING TOOLS (G.E.T.)
LINKAGE GP
Information:
(For parts list, see above)
WORK TOOLS
BLADE GP
Service Magazine
BUCKET GP
Operation and Maintenance Manual
Quick Coupler Operation - Hydraulic Pin Grabber Quick Coupler (If Equipped)
325D and 329D Excavators
325D and 329D Excavators
Special Instruction
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Modification of Hydraulic Excavator Buckets from C Family Linkage and S Family Linkage to CB Family Linkage{6503, 6513, 6700}
Modification of Hydraulic Excavator Buckets from C Family Linkage and S Family Linkage to CB Family Linkage{6503, 6513, 6700}
Modification of Hydraulic Excavator Buckets from C Family Linkage and S Family Linkage to CB Family Linkage{6503, 6513, 6700}
Installation of the 282-4229 Sleeve Bushing Gp (KIT){6513}
Installation of the 282-4229 Sleeve Bushing Gp (KIT){6513}
Installation of the 282-4229 Sleeve Bushing Gp (KIT){6513}
Procedure to Rework Bucket for Use as a Front Shovel{6001, 6101, 6102, 6129, 6531}
Procedure to Rework Bucket for Use as a Front Shovel{6001, 6101, 6102, 6129, 6531}
Procedure to Rework Bucket for Use as a Front Shovel{6001, 6101, 6102, 6129, 6531}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Procedure for Installation and Removal of Cat<SUP>®</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>®</SUP> Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Technical Information Bulletin
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Specifications
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Testing and Adjusting
Specifications - 325D/ 329D
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front
Disassembly and Assembly
Bucket - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems
Bucket - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems
Service Magazine
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
COUPLER GP-QUICK
Operation and Maintenance Manual
Quick Coupler Operation - Hydraulic Pin Grabber Quick Coupler (If Equipped)
325D and 329D Excavators
325D and 329D Excavators
Special Instruction
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 279-5323 Coupler Lines Gp (KIT, PIN GRABBER){1408, 5057, 5479, 6129, 7000, 7332}
Installation of 279-5323 Coupler Lines Gp (KIT, PIN GRABBER){1408, 5057, 5479, 6129, 7000, 7332}
Installation of 279-5323 Coupler Lines Gp (KIT, PIN GRABBER){1408, 5057, 5479, 6129, 7000, 7332}
Installation Instructions for the 316-9108 Coupling Conversion Gp {5057, 6129}
Installation Instructions for the 316-9108 Coupling Conversion Gp {5057, 6129}
Installation Instructions for the 316-9108 Coupling Conversion Gp {5057, 6129}
Procedure to Rework Bucket for Use as a Front Shovel{6001, 6101, 6102, 6129, 6531}
Procedure to Rework Bucket for Use as a Front Shovel{6001, 6101, 6102, 6129, 6531}
Procedure to Rework Bucket for Use as a Front Shovel{6001, 6101, 6102, 6129, 6531}
Additional Spare Pins and Center Lock Clamping Spacers{6129}
Additional Spare Pins and Center Lock Clamping Spacers{6129}
Additional Spare Pins and Center Lock Clamping Spacers{6129}
Procedure for Installing 348-8771 Hydraulic Kit {5057, 5133}
Procedure for Installing 348-8771 Hydraulic Kit {5057, 5133}
Procedure for Installing 348-8771 Hydraulic Kit {5057, 5133}
Installation of the 422-2496 Quick Coupler Conversion Kit on Certain Hydraulic Excavators{6129}
Installation of the 422-2496 Quick Coupler Conversion Kit on Certain Hydraulic Excavators{6129}
Installation of the 422-2496 Quick Coupler Conversion Kit on Certain Hydraulic Excavators{6129}
Technical Information Bulletin
The Pin Grabber Coupler Tube May Leak on Certain 324D, 325D, 329D, 330D, 336D, 345C, and 345D Excavators{5057, 5133}
The Pin Grabber Coupler Tube May Leak on Certain 324D, 325D, 329D, 330D, 336D, 345C, and 345D Excavators{5057, 5133}
The Pin Grabber Coupler Tube May Leak on Certain 324D, 325D, 329D, 330D, 336D, 345C, and 345D Excavators{5057, 5133}
Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into
Specifications
Quick Coupler (Hydraulic)
325D and 329D Excavators and 325D Material Handler Machine System Specifications
325D and 329D Excavators and 325D Material Handler Machine System Specifications
Quick Coupler (Mechanical)
325D and 329D Excavators and 325D Material Handler Machine System Specifications
325D and 329D Excavators and 325D Material Handler Machine System Specifications
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Service Magazine
Connector Lines for Hydraulic Pin Grabber Quick Couplers on Excavators {5057, 6129, 7000}
2006/07/31
2006/07/31
Additional Spare Pins and Center Lock Clamping Spacers Are Available for Certain Excavators {6129}
2010/04/02
2010/04/02
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
GRAPPLE GP
Special Instruction
Orientation of Pin Group For Contractor Grapples{6307, 6307, 7000}
Orientation of Pin Group For Contractor Grapples{6307, 6307, 7000}
Orientation of Pin Group For Contractor Grapples{6307, 6307, 7000}
The Procedure For Replacing The Wear Plates On Contractor Grapples{6307, 7000}
The Procedure For Replacing The Wear Plates On Contractor Grapples{6307, 7000}
The Procedure For Replacing The Wear Plates On Contractor Grapples{6307, 7000}
GROUND ENGAGING TOOLS (G.E.T.)
Operation and Maintenance Manual
Special Instruction
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>®</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>®</SUP> Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Technical Information Bulletin
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
K Series Bucket Tip Slag Retainers For High Temperature Applications are Available {6805}
2009/01/26
2009/01/26
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
TOOLS
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
PIN GP
Special Instruction
Orientation of Pin Group For Contractor Grapples{6307, 6307, 7000}
Orientation of Pin Group For Contractor Grapples{6307, 6307, 7000}
Orientation of Pin Group For Contractor Grapples{6307, 6307, 7000}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Service Magazine
Additional Spare Pins and Center Lock Clamping Spacers Are Available for Certain Excavators {6129}
2010/04/02
2010/04/02
STICK GP
Testing and Adjusting
Specifications - 325D/ 329D
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front
LINKAGE GP
Special Instruction
Installation of the 282-4229 Sleeve Bushing Gp (KIT){6513}
Installation of the 282-4229 Sleeve Bushing Gp (KIT){6513}
Installation of the 282-4229 Sleeve Bushing Gp (KIT){6513}
Service Magazine
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
THUMB GP
Special Instruction
Installation Procedure for <NOBR>378-2347</NOBR>, <NOBR>378-2486</NOBR>, <NOBR>378-2433</NOBR>, <NOBR>378-2467</NOBR> Bracket As for Stiff-Link Thumbs {0679, 6547}
Installation Procedure for378-2347 , 378-2486 , 378-2433 , 378-2467 Bracket As for Stiff-Link Thumbs {0679, 6547}
Installation Procedure for
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}
Procedure to Install Pro and Pro Plus Thumbs on 319D, 320D RR L, 320D L, 320E L, 320E RR L, 324D L, 324E L, 325D L, 329D, 329E L, 336E, 336F, 349E and 349F Hydraulic Excavators {0679, 6129}



