FUEL SYSTEM
PUMP GP-UNIT INJECTOR HYDREGULATOR GP-FUEL PRESSURE
PUMP GP-REFUELING
TANK GP-FUEL
FUEL SYSTEM
PUMP GP-UNIT INJECTOR HYD
#SEBP45130150
319-0677: PUMP GP-UNIT INJECTOR HYD
319-0677 PUMP GP-UNIT INJECTOR HYD
S/N KHX9402-UP
PART OF 222-5900 PUMP & MTG GP-UNIT INJ HYD
S/N KHX9402-UP
PART OF 222-5900 PUMP & MTG GP-UNIT INJ HYD
For full view, you need register
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 313-4620 M | [3] | SCREW-PAN HEAD (M5X0.8X25-MM) | |
| 2. | 318-6357 Y | [1] | PUMP GP-FUEL TRANSFER | |
| 3. | 179-8128 | [1] | SEAL-O-RING (FUEL SYSTEM) | |
| 4. | 262-0284 | [1] | RING-RETAINING | |
| 5. | 228-5897 M | [4] | BOLT-TORX (M8X1.25X136.7-MM) | |
| 6. | 239-2402 | [4] | SEAL-O-RING | |
| 7. | 1F-7960 | [1] | WASHER (13.5X32X6-MM THK) | |
| 8. | 1N-8062 | [1] | BEARING AS-NEEDLE | |
| 9. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 10. | 8C-6711 | [1] | NUT-RETAINER (1/2-20-THD) | |
| 11. | 9X-8267 | [1] | WASHER (6.6X12X2-MM THK) | |
| 12. | 153-7036 | [1] | SPOOL | |
| 13. | 260-5716 | [1] | SPOOL | |
| AVAILABLE REPAIR KIT(S): | ||||
| 326-1006 | [1] | KIT-FUEL TRANSFER PUMP | ||
| (INCLUDES PUMP, BOLT, SCREW, & SEALS) | ||||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45130151
232-0343: REGULATOR GP-FUEL PRESSURE
232-0343 REGULATOR GP-FUEL PRESSURE
S/N KHX305-UP
PART OF 231-3046 LINES GP-FUEL
S/N KHX305-UP
PART OF 231-3046 LINES GP-FUEL
For full view, you need register
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS#SEBP45130152
262-9372: STRAINER GP-FUEL
262-9372 STRAINER GP-FUEL -FLOAT GAUGE
S/N A3R1-UP
PART OF 259-3872, 259-3875, 303-9867, 303-9871 TANK GP-FUEL
S/N A3R1-UP
PART OF 259-3872, 259-3875, 303-9867, 303-9871 TANK GP-FUEL
For full view, you need register
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| INDIVIDUAL PARTS ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 278-3970 J | [1] | KIT-GAUGE (FUEL STRAINER) | ||
| (INCLUDES STOPPER & GAUGE FLOAT) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J IN GRAPHIC | |||
#SEBP45130153
223-3037: TANK & MTG GP-FUEL
For full view, you need register
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS#SEBP45130154
223-3037: TANK & MTG GP-FUEL
For full view, you need register
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS#SEBP45130155
223-3037: TANK & MTG GP-FUEL
For full view, you need register
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS#SEBP45130156
223-3038: TANK GP-FUEL
223-3038 TANK GP-FUEL
S/N A3R1-UP
520-L (137.4-US GAL)
PART OF 223-3037 TANK & MTG GP-FUEL
S/N A3R1-UP
520-L (137.4-US GAL)
PART OF 223-3037 TANK & MTG GP-FUEL
For full view, you need register
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS#SEBP45130157
259-3872: TANK GP-FUEL
For full view, you need register
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4I-0378 | [1] | GASKET-RUBBER | |
| 2. | 5P-4924 | [1] | ELBOW | |
| 3. | 7X-7700 J | [1] | CAP AS-FUEL (LOCKABLE, VENTED) | |
| 3A. | 9X-8600 | [1] | SEAL-O-RING | |
| 4. | 003-7764 | [1] | END-HOSE | |
| 5. | 128-4411 | [1] | VALVE AS (FUEL SHUTOFF) | |
| 6. | 163-6700 | [1] | SENSOR GP-FUEL LEVEL | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | Z | [1] | TANK AS-FUEL | |
| 8. | 262-9372 Y | [1] | STRAINER GP-FUEL (FLOAT GAUGE) | |
| 9. | 095-0736 M | [5] | SCREW-MACHINE (M5X0.8X10-MM) | |
| 10. | 2S-4078 | [1] | SEAL-O-RING | |
| 11. | 3B-0551 | [1] | PLUG-PIPE | |
| 12. | 3J-1907 | [1] | SEAL-O-RING | |
| 13. | 8T-0328 | [5] | WASHER-HARD (5.5X10X1-MM THK) | |
| 14. | 9S-6130 | [1] | PLUG | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9X-2205 J | [1] | KIT-CAP FILTER (FUEL TANK) | ||
| (INCLUDES FILTER AS, 2 SCREWS, 4 GASKETS & VALVE) | ||||
| J | KIT MARKED J AVAILABLE FOR PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP45130158
259-3875: TANK GP-FUEL
For full view, you need register
Parts for your 325D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4I-0378 | [1] | GASKET-RUBBER | |
| 2. | 5P-4924 | [1] | ELBOW | |
| 3. | 7X-7700 J | [1] | CAP AS-FUEL (LOCKABLE, VENTED) | |
| 3A. | 9X-8600 | [1] | SEAL-O-RING | |
| 4. | 003-7764 | [1] | END-HOSE | |
| 5. | 128-4411 | [1] | VALVE AS (FUEL SHUTOFF) | |
| 6. | 163-6700 | [1] | SENSOR GP-FUEL LEVEL | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | Z | [1] | TANK AS-FUEL | |
| 8. | 262-9372 Y | [1] | STRAINER GP-FUEL (FLOAT GAUGE) | |
| 9. | 095-0736 M | [5] | SCREW-MACHINE (M5X0.8X10-MM) | |
| 10. | 2S-4078 | [1] | SEAL-O-RING | |
| 11. | 3B-0551 | [1] | PLUG-PIPE | |
| 12. | 3J-1907 | [1] | SEAL-O-RING | |
| 13. | 8T-0328 | [5] | WASHER-HARD (5.5X10X1-MM THK) | |
| 14. | 9S-6130 | [1] | PLUG | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9X-2205 J | [1] | KIT-CAP FILTER (FUEL TANK) | ||
| (INCLUDES FILTER AS, 2 SCREWS, 4 GASKETS & VALVE | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP45130159
303-9866: TANK GP-FUEL
303-9866 TANK GP-FUEL
S/N A3R1-UP
520-L (137.4-US GAL)
PART OF 223-3037 TANK & MTG GP-FUEL
S/N A3R1-UP
520-L (137.4-US GAL)
PART OF 223-3037 TANK & MTG GP-FUEL
For full view, you need register
Parts for your 325D L EXCAVATOR:
CATERPILLAR SISInformation:
FUEL SYSTEM
PUMP GP-UNIT INJECTOR HYD
Special Instruction
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump{1256}
Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump{1256}
Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump{1256}
Installation of a Dual Tapered Roller Bearing HEUI Hydraulic Pump onto Certain C7 ACERT Engines {1714}
Installation of a Dual Tapered Roller Bearing HEUI Hydraulic Pump onto Certain C7 ACERT Engines {1714}
Installation of a Dual Tapered Roller Bearing HEUI Hydraulic Pump onto Certain C7 ACERT Engines {1714}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP ON VARIOUS C7 AND C9 MACHINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP ON VARIOUS C7 AND C9 MACHINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP ON VARIOUS C7 AND C9 MACHINE ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Updated Diagnostic Information Is Available for Certain C7 and C9 ACERT Engines That Are Equipped With Hydraulic Electronic Unit Injectors (HEUI) Fuel Systems{1126, 1250, 1251, 1290, 1714}
Updated Diagnostic Information Is Available for Certain C7 and C9 ACERT Engines That Are Equipped With Hydraulic Electronic Unit Injectors (HEUI) Fuel Systems{1126, 1250, 1251, 1290, 1714}
Updated Diagnostic Information Is Available for Certain C7 and C9 ACERT Engines That Are Equipped With Hydraulic Electronic Unit Injectors (HEUI) Fuel Systems{1126, 1250, 1251, 1290, 1714}
Specifications
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP ON VARIOUS C7 AND C9 MACHINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP ON VARIOUS C7 AND C9 MACHINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP ON VARIOUS C7 AND C9 MACHINE ENGINES
Service Letter-Asia
Service Letter-APD
Troubleshooting
Injection Actuation Pressure Control Valve Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
C7 and C9 Engines for Caterpillar Built Machines
CID 0042 FMI 05 Injector Actuation Valve open circuit
C7 and C9 Engines for Caterpillar Built Machines
C7 and C9 Engines for Caterpillar Built Machines
CID 0042 FMI 06 Injector Actuation Valve short to ground
C7 and C9 Engines for Caterpillar Built Machines
C7 and C9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Unit Injector Hydraulic Pump - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement
Unit Injector Hydraulic Pump - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement
Service Magazine
A New Injection Pump Kit Is Now Available for C7 Machine Engines {1714}
A New Injection Pump Kit Is Now Available for C7 Machine Engines {1714}
A New Injection Pump Kit Is Now Available for C7 Machine Engines {1714}
Cat<SUP>®</SUP> Reman Announces the Release of H1315B Injector with Pre-Screens for C7 and C9 Machine Engines {1251, 1290}
Cat® Reman Announces the Release of H1315B Injector with Pre-Screens for C7 and C9 Machine Engines {1251, 1290}
Cat® Reman Announces the Release of H1315B Injector with Pre-Screens for C7 and C9 Machine Engines {1251, 1290}
