303-9867 TANK GP-FUEL S/N A3R1-UP 520-L (137.4-US GAL) PART OF 303-9866 TANK GP-FUEL 325D L EXCAVATOR

FUEL SYSTEM

TANK GP-FUEL

0. 303-9867 TANK GP-FU
1. 303-9871 TANK GP-FU
2. 327-3323 TANK GP-FU

VALVE GP-FUEL SHUTOFF

3. 298-3147 VALVE GP-F

ELECTRICAL AND STARTING SYSTEM

ALARM GP

4. 132-1829 ALARM GP
5. 231-1771 ALARM GP-T

ALTERNATOR GP-CHARGING

6. 177-6972 ALTERNATOR
7. 185-5294 ALTERNATOR

BATTERY GP

8. 251-0429 BATTERY &
9. 251-0429 BATTERY &
0. INFORMATION

EXCAVATOR 325D L EXCAVATOR A3R
325D L Excavator A3R00001-UP (MACHINE) POWERED BY C7 Engine SEBP4513 325D L A3R (2006)

FUEL SYSTEM

TANK GP-FUEL

223-3037 TANK & MTG GP-FUEL

223-3038 TANK GP-FUEL

259-3872 TANK GP-FUEL

259-3875 TANK GP-FUEL

303-9866 TANK GP-FUEL

303-9867 TANK GP-FUEL

303-9871 TANK GP-FUEL

327-3323 TANK GP-FUEL

#SEBP45130160

303-9867: TANK GP-FUEL

TANK GP-FUEL

303-9867 TANK GP-FUEL
S/N A3R1-UP
520-L (137.4-US GAL)
PART OF 303-9866 TANK GP-FUEL

i02755646 SEBP4513

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-0378	[1]	GASKET-RUBBER
2.	5P-4924	[1]	ELBOW
3.	7X-7700 J	[1]	CAP AS-FUEL (LOCKABLE, VENTED)
	9X-8600	[1]	SEAL-O-RING
4.	003-7764	[1]	END-HOSE
5.	128-4411	[1]	VALVE AS (FUEL SHUTOFF)
6.	163-6700	[1]	SENSOR GP-FUEL LEVEL
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	262-9372 Y	[1]	STRAINER GP-FUEL (FLOAT GAUGE)
9.	095-0736 M	[5]	SCREW-MACHINE (M5X0.8X10-MM)
10.	2S-4078	[1]	SEAL-O-RING
11.	3B-0551	[1]	PLUG-PIPE
12.	3J-1907	[1]	SEAL-O-RING
13.	8T-0328	[5]	WASHER-HARD (5.5X10X1-MM THK)
14.	9S-6130	[1]	PLUG

			AVAILABLE REPAIR KIT(S):
	9X-2205 J	[1]	KIT-CAP FILTER (FUEL TANK)
			(ALSO INCLUDES FILTER AS, SCREW, GASKETS & VALVE)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP45130161

303-9871: TANK GP-FUEL

TANK GP-FUEL

303-9871 TANK GP-FUEL
S/N A3R1-UP
520-L (137.4-US GAL)
PART OF 303-9866 TANK GP-FUEL

i02755636 SEBP4513

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-0378	[1]	GASKET-RUBBER
2.	5P-4924	[1]	ELBOW
3.	7X-7700	[1]	CAP AS-FUEL (LOCKABLE, VENTED)
	9X-2205	[1]	KIT-CAP FILTER (FUEL TANK)
			(INCLUDES FILTER AS, SCREWS, GASKETS, & VALVE)
	9X-8600	[1]	SEAL-O-RING
4.	003-7764	[1]	END-HOSE
5.	128-4411	[1]	VALVE AS (FUEL SHUTOFF)
6.	163-6700	[1]	SENSOR GP-FUEL LEVEL
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	262-9372 Y	[1]	STRAINER GP-FUEL (FLOAT GAUGE)
9.	095-0736 M	[5]	SCREW-MACHINE (M5X0.8X10-MM)
10.	2S-4078	[1]	SEAL-O-RING
11.	3B-0551	[1]	PLUG-PIPE
12.	3J-1907	[1]	SEAL-O-RING
13.	8T-0328	[5]	WASHER-HARD (5.5X10X1-MM THK)
14.	9S-6130	[1]	PLUG
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP45130162

327-3323: TANK GP-FUEL

TANK GP-FUEL

327-3323 TANK GP-FUEL
S/N A3R1-UP
520-L (137.4-US GAL)
PART OF 223-3037 TANK & MTG GP-FUEL

i03888710 SEBP4513

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-0378	[1]	GASKET-RUBBER
2.	5P-4924	[1]	ELBOW
3.	7X-7700	[1]	CAP AS-FUEL (LOCKABLE, VENTED)
	9X-2205	[1]	KIT-CAP FILTER (FUEL TANK)
			(INCLUDES FILTER AS, SCREWS, GASKETS, & VALVE)
	9X-8600	[1]	SEAL-O-RING
4.	003-7764	[1]	END-HOSE
5.	128-4411	[1]	VALVE AS (FUEL SHUTOFF)
6.	341-1842	[1]	SENDER AS-FUEL LEVEL
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	303-9933 J	[1]	STRAINER AS-FUEL (FLOAT GAUGE)
8.	9S-6130	[1]	PLUG
9.	095-0736 M	[5]	SCREW-MACHINE (M5X0.8X10-MM)
10.	2S-4078	[1]	SEAL-O-RING
11.	3B-0551	[1]	PLUG-PIPE
12.	3J-1907	[1]	SEAL-O-RING
13.	8T-0328	[5]	WASHER-HARD (5.5X10X1-MM THK)
14.	135-8579	[3]	BOLT AS

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY

			AVAILABLE REPAIR KIT(S):
	303-9937 J	[1]	KIT-GAUGE (FUEL STRAINER)
			(INCLUDES STOPPER & GAUGE)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP45130163

298-3147: VALVE GP-FUEL SHUTOFF

VALVE GP-FUEL SHUTOFF

298-3147 VALVE GP-FUEL SHUTOFF
S/N A3R1-UP
PART OF 259-3885 LINES GP-FUEL

i02789081 SEBP4513

2983147 VALVE GP-FUEL SHUTOFF Parts scheme

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	298-3257	[1]	STOP
2.	298-3258	[1]	LEVER
3.	260-6692 M	[1]	NUT (M5X0.8-THD)
4.	3J-1907	[1]	SEAL-O-RING
5.	8T-0328	[1]	WASHER-HARD (5.5X10X1-MM THK)

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	M		METRIC PART

#SEBP45130164

132-1829: ALARM GP

ALARM GP

132-1829 ALARM GP -ACTION
S/N A3R1-UP
24-VOLT
PART OF 251-0432 WIRING GP-CAB

i01664344 SEBP4513

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
2.	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)

#SEBP45130165

231-1771: ALARM GP-TRAVEL

ALARM GP-TRAVEL

231-1771 ALARM GP-TRAVEL -BACKUP
S/N A3R1-UP
PART OF 240-1674 CHASSIS AR

i02126685 SEBP4513

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	213-9100	[1]	ALARM AS (BACKUP)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (29-CM)
2.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
3.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP45130166

177-6972: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

177-6972 ALTERNATOR GP-CHARGING
S/N A3R1-UP
24-VOLT, 65-AMPERE
PART OF 240-0787 ENGINE AR

i01553543 SEBP4513

1776972 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	129-5096	[1]	PULLEY-ALTERNATOR (8-GROOVE)
2.	185-5294 Y	[1]	ALTERNATOR GP-CHARGING (24-VOLT)
3.	203-0199	[1]	SPACER (HEX)
4.	258-7531	[1]	GUARD AS
	6V-8214 M	[7]	BOLT (M6X1X20-MM)
	6V-8225 M	[7]	NUT (M6X1-THD)
	9X-8267	[14]	WASHER (6.6X12X2-MM THK)
5.	5P-2424	[1]	BOLT (1/2-13X2.25-IN)
6.	6V-8188	[1]	NUT (1/2-13-THD)
7.	7X-0340	[1]	BOLT (1/2-13X6.5-IN)
8.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
9.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
10.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP45130167

185-5294: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

185-5294 ALTERNATOR GP-CHARGING
S/N A3R1-UP
24-VOLT, 65-AMPERE
PART OF 177-6972 ALTERNATOR GP-CHARGING

i01530501 SEBP4513

1855294 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	185-2653	[1]	FRAME
2.	5S-7349	[1]	BOLT (1/4-20X0.5-IN)
3.	185-2639	[1]	FAN AS
4.	1H-3244	[1]	LOCKWASHER
5.	185-2645	[1]	FRAME
6.	2K-4821	[1]	LOCKNUT (5/8-18-THD)
7.	5P-8247	[1]	WASHER-HARD (17X32X3.5-MM THK)
8.	228-9657	[1]	COVER AS
9.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
10.	185-2647	[1]	GROMMET
11.	9L-6770	[1]	CAP-DUST
12.	185-2642	[1]	STATOR AS
13.	185-2638	[2]	COLLAR
14.	185-2654	[1]	PLATE
15.	185-2650	[1]	ROTOR AS
16.	185-2644	[1]	COIL AS
17.	185-2648	[1]	REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)
18.	6V-8189	[1]	NUT (5/16-18-THD)
19.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
20.	3F-9556	[1]	LOCKWASHER

			AVAILABLE REPAIR KIT(S):
	185-2655	[1]	KIT-BEARING (ALTERNATOR)
			(INCLUDES 2 BEARINGS)
	199-8436	[1]	KIT-TERMINAL (ALTERNATOR AIR)
			(INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLT, GROMMET, & NUT)
	199-7891	[1]	KIT-TERMINAL (ALTERNATOR AIR)
			(INCLUDES INSULATORS, WASHERS & NUT)
	185-2658	[1]	KIT-HARDWARE (ALTERNATOR AIR)
			(INCLUDES BOLTS)

#SEBP45130168

251-0429: BATTERY & WIRING GP

BATTERY & WIRING GP

251-0429 BATTERY & WIRING GP
S/N A3R1-328
PART OF 240-1674 CHASSIS AR

i02455541 SEBP4513

2510429 BATTERY & WIRING GP Parts scheme

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2G-8767	[3]	WASHER (10.5X60X3-MM THK)
2.	3S-2093	[46]	STRAP-CABLE
3.	3T-5760	[2]	BATTERY GP (12-VOLT, 750-CCA)
4.	5I-8270	[1]	COVER-BATTERY
5.	6W-6005	[1]	HOLD-DOWN-BATTERY
6.	7I-2673	[5]	STRAP-CABLE
7.	7K-1181	[13]	STRAP-CABLE
8.	7Y-5456	[2]	GROMMET
9.	087-4587	[1]	GROMMET
10.	111-4836	[10]	CLIP
11.	111-4837	[13]	CLIP
12.	111-4838	[9]	CLIP
13.	111-4839	[9]	STRAP
14.	116-0118	[12]	CLIP
15.	132-1805	[1]	STRAP AS-GROUND
16.	135-8572	[2]	BOLT AS
17.	135-8573	[2]	BOLT AS
18.	140-0860	[1]	STRAP AS-GROUND
19.	170-6929	[1]	CABLE AS
	5P-0761 E		CABLE (00-GA, RED)(31-CM)
	9G-0002	[1]	COVER AS-TERMINAL (RED)
	9G-0005	[1]	COVER AS-TERMINAL (BLACK)
			(EACH COVER-TERMINAL INCLUDES )
	8L-8413	[1]	STRAP-CABLE (WHITE)
	8C-5918	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	8T-9756	[1]	TERMINAL AS-BATTERY (POSITIVE)
			(EACH TERMINAL AS INCLUDES)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
20.	170-9336	[1]	BRACKET AS
21.	231-1827	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(23-CM)
	9G-0003	[1]	COVER AS-TERMINAL (BLACK)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	9G-8909	[1]	COVER-TERMINAL (BLACK)
	8T-9757	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
22.	234-1051	[2]	BRACKET
23.	238-2501	[1]	KNOB
24.	238-2528	[1]	ROD
25.	238-2529	[1]	BRACKET AS
26.	250-5072	[1]	SHEET AS
	250-5073	[1]	INSULATION
27.	250-5075	[1]	SHEET AS
	250-5076	[1]	INSULATION
28.	251-0451	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(288-CM)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
29.	251-0464	[1]	GROMMET
30.	251-0467	[1]	BRACKET AS
31.	256-1705	[1]	SHEET AS
	256-1707	[1]	INSULATION
32.	267-7969	[1]	HARNESS AS-CHASSIS
	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	153-2630	[1]	PLUG AS-CONNECTOR (54-PIN, BROWN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[17]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	160-7689	[1]	PLUG AS-CONNECTOR (70-PIN)
	163-6637	[1]	RECEPTACLE AS-CONNECTOR (54-PIN, BLACK)
	174-3016	[2]	PLUG AS-CONNECTOR (3-PIN)
	230-4009	[2]	PLUG AS-CONNECTOR (12-PIN)
	230-4011	[7]	PLUG AS-CONNECTOR (2-PIN)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	230-5010	[2]	PLUG AS-CONNECTOR (6-PIN)
	231-2295	[2]	PLUG AS-CONNECTOR (8-PIN)
	243-4505	[6]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4506	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	243-4508	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
33.	093-2065	[1]	GROMMET
34.	132-5789	[3]	CLIP (LADDER)
35.	4I-7889	[1]	SPACER (11X25X45-MM THK)
36.	4K-8864	[3]	CLIP (LOOP)
37.	4P-7428	[1]	CLIP (LADDER)
38.	4P-7581	[2]	CLIP (LADDER)
39.	5C-7261 M	[1]	NUT (M8X1.25-THD)
40.	5C-7883 M	[4]	BOLT-SOCKET HEAD (M6X1X16-MM)
41.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
42.	6G-2256	[2]	CLAMP
43.	6G-2263	[5]	SPACER (10.5X19X28.5-MM THK)
44.	6K-8178	[1]	CLIP (LOOP)
45.	7X-2621 M	[2]	BOLT (M10X1.5X12-MM)
46.	7Y-8165	[2]	GROMMET
47.	8M-2770	[1]	CLIP (LOOP)
48.	8T-4121	[54]	WASHER-HARD (11X21X2.5-MM THK)
49.	8T-4133 M	[1]	NUT (M10X1.5-THD)
50.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
51.	8T-4137 M	[33]	BOLT (M10X1.5X20-MM)
52.	8T-4172 M	[1]	BOLT (M10X1.5X80-MM)
53.	8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
54.	8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
55.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
56.	8T-4191 M	[8]	BOLT (M10X1.5X16-MM)
57.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
58.	8T-4226	[1]	WASHER-PLATED (10.5X45X3-MM THK)
59.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
60.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
61.	8T-6869 M	[1]	BOLT (M8X1.25X60-MM)
62.	8T-6912 M	[1]	BOLT (M8X1.25X50-MM)
63.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP45130169

251-0429: BATTERY & WIRING GP

BATTERY & WIRING GP

251-0429 BATTERY & WIRING GP
S/N A3R329-UP
PART OF 240-1674 CHASSIS AR

i02696384 SEBP4513

For full view, you need register

Parts for your 325D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2G-8767	[3]	WASHER (10.5X60X3-MM THK)
2.	3S-2093	[46]	STRAP-CABLE
3.	263-9574	[2]	BATTERY (12-VOLT, MAINTENANCE FREE)
4.	5I-8270	[1]	COVER-BATTERY
5.	6W-6005	[1]	HOLD-DOWN-BATTERY
6.	7I-2673	[5]	STRAP-CABLE
7.	7K-1181 C	[14]	STRAP-CABLE
8.	7Y-5456	[2]	GROMMET
9.	087-4587	[1]	GROMMET
10.	111-4836	[10]	CLIP
11.	111-4837	[13]	CLIP
12.	111-4838	[9]	CLIP
13.	111-4839	[9]	STRAP
14.	116-0118	[12]	CLIP
15.	132-1805	[1]	STRAP AS-GROUND
16.	135-8572	[2]	BOLT AS
17.	135-8573	[2]	BOLT AS
18.	140-0860	[1]	STRAP AS-GROUND
19.	170-6929	[1]	CABLE AS
	5P-0761 E		CABLE (00-GA, RED)(31-CM)
	9G-0002	[1]	COVER AS-TERMINAL (RED)
	9G-0005	[1]	COVER AS-TERMINAL (BLACK)
			(EACH TERMINAL COVER INCLUDES)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	8C-5918	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	8T-9756	[1]	TERMINAL AS-BATTERY (POSITIVE)
			(EACH TERMINAL AS INCLUDES)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
20.	170-9336	[1]	BRACKET AS
21.	231-1827	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(23-CM)
	9G-0003	[1]	COVER AS-TERMINAL (BLACK)(BATTERY)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	9G-8909	[1]	COVER-TERMINAL (BLACK)(DISCONNECT SWITCH)
	8T-9757	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
22.	234-1051	[2]	BRACKET
23.	238-2501	[1]	KNOB
24.	238-2528	[1]	ROD
25.	238-2529	[1]	BRACKET AS
26.	250-5072	[1]	SHEET AS
	250-5073	[1]	INSULATION
27.	250-5075	[1]	SHEET AS
	250-5076	[1]	INSULATION
28.	251-0451	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0761 E		CABLE (00-GA, RED)(288-CM)
	8N-0869	[1]	COVER-TERMINAL (RED)(STARTING MOTOR)
	8N-1725	[1]	COVER AS-TERMINAL (RED)(BATTERY)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
29.	251-0464	[1]	GROMMET
30.	251-0467	[1]	BRACKET AS
31.	256-1705	[1]	SHEET AS
	256-1707	[1]	INSULATION
32.	283-2932 C	[1]	HARNESS AS-CHASSIS
33.	093-2065	[1]	GROMMET
34.	132-5789	[1]	CLIP (LADDER)
35.	4I-7889	[2]	SPACER (11X25X45-MM THK)
36.	4K-8864	[3]	CLIP (LOOP)
37.	4P-7428	[1]	CLIP (LADDER)
38.	4P-7581	[1]	CLIP (LADDER)
39.	5C-7261 M	[1]	NUT (M8X1.25-THD)
40.	5C-7883 M	[4]	BOLT-SOCKET HEAD (M6X1X16-MM)
41.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
42.	6G-2256	[2]	CLAMP
43.	6G-2263	[5]	SPACER (10.5X19X28.5-MM THK)
44.	6K-8178	[1]	CLIP (LOOP)
45.	7X-2621 M	[2]	BOLT (M10X1.5X12-MM)
46.	7Y-8165	[2]	GROMMET
47.	8M-2770	[1]	CLIP (LOOP)
48.	8T-4121	[54]	WASHER-HARD (11X21X2.5-MM THK)
49.	8T-4133 M	[1]	NUT (M10X1.5-THD)
50.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
51.	8T-4137 M	[31]	BOLT (M10X1.5X20-MM)
52.	8T-4172 M	[1]	BOLT (M10X1.5X80-MM)
53.	8T-4182 M	[2]	BOLT (M10X1.5X45-MM)
54.	8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
55.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
56.	8T-4191 M	[8]	BOLT (M10X1.5X16-MM)
57.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
58.	8T-4226	[1]	WASHER-PLATED (10.5X45X3-MM THK)
59.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
60.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
61.	8T-6869 M	[1]	BOLT (M8X1.25X60-MM)
62.	8T-6912 M	[1]	BOLT (M8X1.25X50-MM)
63.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
64.	091-9035	[1]	SPACER (11X25X20-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

Information:

FUEL SYSTEM

TANK GP-FUEL

Operation and Maintenance Manual

Fuel Tank Cap and Strainer - Clean
325D and 329D Excavators

Fuel Tank Shutoff and Drain Control
325D and 329D Excavators

Fuel Tank Water and Sediment - Drain
325D and 329D Excavators

Fuel System Primary Filter (Water Separator) Element - Replace
325D and 329D Excavators

Fuel System Water Separator - Drain
325D and 329D Excavators

Specifications

Fuel Tank
325D and 329D Excavators and 325D Material Handler Machine System Specifications

Tool Operating Manual

NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}

370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}

284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}

284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}

370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

Troubleshooting

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Disassembly and Assembly

Fuel Tank - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems

Fuel Tank - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems

Service Magazine

Updated Fuel Tank Caps are Now Available {1273}
2014/12/03

A New Fuel Level Sensor Assembly Is Available for the Fuel Tank {1273}
2009/09/28