AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GPTURBOCHARGER GP
INLET GP-AIR
TURBOCHARGER GP
LINES GP-AIR
MANIFOLD GP-EXHAUST
MUFFLER GP
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
#SEBP45160110
255-2914: AIR CLEANER GP
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 131-8826 | [1] | FILM-INSTRUCTION (TOP, AIR CLEANER COVER) | |
| 2. | 131-8829 | [1] | VALVE-DUST (AIR CLEANER) | |
| 3. | 142-1404 | [1] | FILTER ELEMENT AS-AIR (SECONDARY) | |
| 4. | 142-1339 | [1] | FILTER ELEMENT AS-AIR (PRIMARY) | |
| -OR- | ||||
| 220-0453 | [1] | FILTER ELEMENT AS-AIR (PRIMARY, ULTRA HIGH EFFICIENCY) | ||
| 5. | 159-7667 | [1] | SEAL-O-RING | |
| 6. | 131-8828 | [1] | COVER AS | |
| 6A. | 139-8794 | [3] | LATCH | |
| 7. | 5L-3233 | [1] | FITTING-CONNECTOR | |
| 8. | 1R-9953 | [1] | CAP | |
#SEBP45160111
266-6190: AIR CLEANER GP
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-1404 | [1] | FILTER ELEMENT AS-AIR (SECONDARY) | |
| 2. | 142-1339 | [1] | FILTER ELEMENT AS-AIR (PRIMARY) | |
| -OR- | ||||
| 220-0453 | [1] | FILTER ELEMENT AS-AIR (PRIMARY, ULTRA HIGH EFFICIENCY) | ||
| 3. | 171-9892 | [1] | COVER AS | |
| 4. | 1R-9953 | [1] | CAP | |
| 5. | 5L-3233 | [1] | FITTING-CONNECTOR | |
| 6. | 131-8826 | [1] | FILM-INSTRUCTION (TOP, AIR CLEANER COVER) | |
#SEBP45160112
235-5507: CARTRIDGE GP-TURBOCHARGER
235-5507 CARTRIDGE GP-TURBOCHARGER
S/N TXD1-UP; THX300-UP; THY1-UP
PART OF 250-7700 TURBOCHARGER GP
ALSO AN ATTACHMENT
S/N TXD1-UP; THX300-UP; THY1-UP
PART OF 250-7700 TURBOCHARGER GP
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 206-6461 | [1] | PISTON-RING | |
| 2. | 510-3597 | [1] | NUT (M8X1.25-THD, LH) | |
| 3. | 7C-6658 | [1] | RING-RETAINING | |
| 4. | 510-3670 | [1] | INSERT | |
| 5. | 7C-5828 | [1] | SEAL-O-RING | |
| 6. | 206-6459 | [1] | PISTON RING | |
| 7. | 510-3683 | [1] | SLEEVE-FLINGER | |
| 8. | 206-6460 | [1] | SLEEVE-THRUST | |
| 9. | 156-0516 | [1] | BEARING-THRUST | |
| 10. | 510-3705 | [1] | DEFLECTOR-OIL | |
| 11. | 164-9414 | [2] | BEARING-JOURNAL | |
| 12. | 4P-9807 | [4] | RING-RETAINING |
#SEBP45160113
242-1934: ELBOW GP-AIR INLET
242-1934 ELBOW GP-AIR INLET
S/N TXD1-UP; THX300-UP; THY1-UP
PART OF 270-2771, 290-0760 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N TXD1-UP; THX300-UP; THY1-UP
PART OF 270-2771, 290-0760 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 131-0353 M | [2] | STUD (M8X1.25X82.75-MM) | |
| 2. | 221-6809 | [1] | ELBOW | |
| 3. | 3E-4352 | [2] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 4. | 8C-5748 M | [5] | BOLT (M8X1.25X55-MM) | |
| 5. | 8T-0100 M | [1] | BOLT (M8X1.25X60-MM) | |
| 6. | 9M-1974 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 1U-8846 B | SEALANT-GASKET | ||
| 8. | 398-5601 | [1] | PLUG AS | |
| 238-5081 | [1] | SEAL-O-RING | ||
| 360-3681 | [1] | PLUG (7/8-14-THD) | ||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP45160114
437-3321: KIT-TURBOCHARGER GASKET
437-3321 KIT-TURBOCHARGER GASKET
S/N T2Y1-UP
CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO TURBO KIT PART NUMBERS 317-8751-UP
FIELD REPLACEMENT FOR 338-3577 KIT-GASKET
FOR USE WITH @@@@@290-0760@@@@@
FIELD INSTALLATION
S/N T2Y1-UP
CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO TURBO KIT PART NUMBERS 317-8751-UP
FIELD REPLACEMENT FOR 338-3577 KIT-GASKET
FOR USE WITH @@@@@290-0760@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1P-0451 | [1] | GASKET (TURBOCHARGER) | ||
| 197-8419 | [1] | GASKET (TURBOCHARGER) | ||
| 3E-8017 M | [4] | LOCKNUT (M10X1.5-THD) | ||
| 3K-0360 | [4] | SEAL-O-RING | ||
| 5P-7530 | [1] | SEAL-O-RING | ||
| 6V-5048 | [1] | SEAL-O-RING | ||
| 6V-6609 | [8] | SEAL-O-RING | ||
| 214-7568 | [2] | SEAL-O-RING | ||
| 228-7089 | [3] | SEAL-O-RING | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 418-6781 M | [4] | STUD-TAPERLOCK (M10X1.5X40-MM) | ||
| FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSISST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
| M | METRIC PART | |||
#SEBP45160115
230-2898: LINES GP-AIR
230-2898 LINES GP-AIR -AFTERCOOLER TO TURBOCHARGER
S/N T2Y1-244
PART OF 279-7825 INSTALLATION AR-ENGINE
S/N T2Y1-244
PART OF 279-7825 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 144-0367 | [12] | CLAMP-HOSE | |
| 2. | 230-2933 | [1] | HOSE | |
| 3. | 230-2934 | [1] | HOSE | |
| 4. | 230-2935 | [1] | TUBE AS | |
| 5. | 230-2939 | [1] | BRACKET | |
| 6. | 230-2940 | [1] | HOSE | |
| 7. | 230-2941 | [1] | HOSE | |
| 8. | 230-2942 | [1] | TUBE AS | |
| 9. | 265-3561 | [1] | SEAL | |
| 10. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| M | METRIC PART | |||
#SEBP45160116
230-2898: LINES GP-AIR
230-2898 LINES GP-AIR -AFTERCOOLER TO TURBOCHARGER
S/N T2Y245-UP
PART OF 279-7825 INSTALLATION AR-ENGINE
S/N T2Y245-UP
PART OF 279-7825 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 144-0367 | [12] | CLAMP-HOSE | |
| 2. | 230-2933 | [1] | HOSE | |
| 3. | 230-2866 C | [1] | HOSE | |
| 4. | 375-5658 C | [1] | TUBE AS | |
| 5. | 230-2939 | [1] | BRACKET | |
| 6. | 230-2940 | [1] | HOSE | |
| 7. | 281-3515 C | [1] | HOSE | |
| 8. | 281-3512 C | [1] | TUBE AS | |
| 9. | 265-3561 | [1] | SEAL | |
| 10. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 12. | 7X-7729 | [6] | WASHER (11X25X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP45160117
239-6406: LINES GP-AIR
239-6406 LINES GP-AIR -AIR CLEANER TO TURBOCHARGER
S/N T2Y1-UP
PART OF 279-7825 INSTALLATION AR-ENGINE
S/N T2Y1-UP
PART OF 279-7825 INSTALLATION AR-ENGINE
For full view, you need register
#SEBP45160118
165-4444: MANIFOLD GP-EXHAUST
165-4444 MANIFOLD GP-EXHAUST
S/N TXD1-UP; THX300-UP; THY1-UP
45 DEGREE DRY EXHAUST MANIFOLD WITH REAR TURBOCHARGER EXHAUST
PART OF 270-2771, 290-0760 ENGINE AR-COMPLETE
FOR USE WITH @@@@@165-4465@@@@@
ALSO AN ATTACHMENT
S/N TXD1-UP; THX300-UP; THY1-UP
45 DEGREE DRY EXHAUST MANIFOLD WITH REAR TURBOCHARGER EXHAUST
PART OF 270-2771, 290-0760 ENGINE AR-COMPLETE
FOR USE WITH @@@@@165-4465@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-6620 M | [12] | LOCKNUT (M10X1.5-THD) | |
| 2. | 161-3398 | [1] | MANIFOLD-EXHAUST | |
| 3. | 161-3411 | [6] | GASKET | |
| 4. | 192-4697 | [1] | MANIFOLD-EXHAUST | |
| 5. | 203-7775 | [1] | MANIFOLD-EXHAUST | |
| 6. | 116-3715 M | [12] | STUD-TAPERLOCK (M10X1.5X85-MM) | |
| 7. | 4P-4369 | [6] | SPACER (12X19X23.5-MM THK) | |
| 8. | 6V-5839 | [12] | WASHER (11X21X2.5-MM THK) | |
| 9. | 8T-7044 M | [4] | STUD-TAPERLOCK (M10X1.5X40-MM) | |
| M | METRIC PART | |||
#SEBP45160119
253-4487: MUFFLER & CONVERTER
253-4487 MUFFLER & CONVERTER
S/N T2Y1-UP
955 X 521 X 424-MM, 38 X 21 X 17-IN. PROVIDE AN OPTIONAL AFTERTREATMENT CATALYST MUFFLER FOR THE 330CL EXCAVATOR
FIELD INSTALLATION
S/N T2Y1-UP
955 X 521 X 424-MM, 38 X 21 X 17-IN. PROVIDE AN OPTIONAL AFTERTREATMENT CATALYST MUFFLER FOR THE 330CL EXCAVATOR
FIELD INSTALLATION
For full view, you need register
Parts for your 330D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
Information:
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
Operation and Maintenance Manual
Engine Air Filter Primary Element - Clean/Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Engine Air Filter Secondary Element - Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Special Instruction
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Specifications
Air Cleaner - Lines
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Disassembly and Assembly
Air Cleaner - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Service Magazine
