233-9134 CYLINDER GP-TILT S/N S6A762-UP 165.1-MM (6.5-IN) BORE X 128-MM (5.0-IN) STROKE PART OF 320-5056 PUSH ARM GP AN ATTACHMENT D6N

HYDRAULIC SYSTEM

CYLINDER GP

0. 233-9134 CYLINDER G
1. 328-4267 CYLINDER G

FILTER GP

2. 169-4019 FILTER GP-

HYDRAULIC GP

3. 313-1270 HYDRAULIC
4. 273-0562 HYDRAULIC
5. 241-3082 HYDRAULIC
6. 230-2140 HYDRAULIC
7. 273-0561 HYDRAULIC

OPERATOR STATION

CONTROL GP-HYDRAULIC

8. 248-4204 LEVER GP-C
9. 260-1848 LEVER GP-C
0. INFORMATION

TRACK-TYPE TRACTOR D6N TRACK-TYPE TRACTOR DJA
D6N TRACK-TYPE TRACTOR XL, LGP Differential Steering DJA00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP4517 D6N DJA (2006)

HYDRAULIC SYSTEM

CYLINDER GP

115-3523 CYLINDER GP-TILT

160-0054 CYLINDER GP-TILT

233-9134 CYLINDER GP-TILT

328-4267 CYLINDER GP-TILT

138-7033 MOUNTING GP-CYLINDER

134-6775 PIN GP-CYLINDER

#SEBP45170510

233-9134: CYLINDER GP-TILT

CYLINDER GP-TILT

233-9134 CYLINDER GP-TILT
S/N S6A762-UP
165.1-MM (6.5-IN) BORE X 128-MM (5.0-IN) STROKE
PART OF 320-5056 PUSH ARM GP
AN ATTACHMENT

i02423029 SEBP4517

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1U-4069	[1]	ROD AS
2.	4T-0259	[1]	PISTON
3.	8E-5703	[24]	SHIM (0.8-MM THK)
4.	8J-2880	[1]	CAP AS-BEARING
5.	225-3284	[1]	SEAL-WIPER
6.	233-9135	[1]	CYLINDER AS
6A.	2J-8489	[1]	BEARING
7.	233-9138	[1]	HEAD-CYLINDER
8.	167-2208	[1]	SEAL AS-BUFFER
9.	167-2319	[1]	SEAL-U-CUP
10.	1J-2921	[1]	BOLT (1-1/2-12X3.75-IN)
11.	3J-9703	[1]	RING-WEAR
12.	3S-6162	[1]	WASHER-HARD (40.5X67X6-MM THK)
13.	5J-4991	[1]	SEAL AS
14.	6V-7742 M	[4]	NUT-FULL (M20X2.5-THD)
15.	6V-8133 M	[4]	BOLT (M24X3X80-MM)
16.	6V-8237	[4]	WASHER (26X44X4-MM THK)
17.	6V-9167 M	[4]	BOLT (M20X2.5X140-MM)
18.	7J-8955	[1]	RING-BACKUP
19.	7J-8956	[1]	SEAL-O-RING
20.	8T-8379	[1]	SEAL-HEAD
21.	9T-0094	[1]	RING-WEAR
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP45170511

328-4267: CYLINDER GP-TILT

CYLINDER GP-TILT

328-4267 CYLINDER GP-TILT -BULLDOZER
S/N F6A1-UP; B6C1-UP; F6C1-UP; G6G1-UP; B6L1-UP; G6M1-UP; B6X1-UP; B6Y1-UP
139.7-MM (5.5-IN) BORE X 114-MM (4.5-IN) STROKE
PART OF 225-8291 BULLDOZER AR-ANGLING, 223-6303, 223-6304, 225-8292, 262-9873, 267-2837, 274-6627, 274-9834 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT

i03514941 SEBP4517

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[3]	FITTING-GREASE (1/8-27 PTF)
2.	3J-9545	[1]	LOCKNUT (2-12-THD)
3.	1U-4049	[1]	WASHER (51X73X12.7-MM THK)
4.	160-0060	[1]	PISTON
5.	6E-0465	[1]	SEAL AS
6.	4J-4606	[1]	RING-WEAR
7.	2H-9247	[1]	SEAL-O-RING
8.	2K-2961	[1]	RING-BACKUP
9.	204-9542	[1]	ROD AS
9A.	1S-3311	[1]	RING-RETAINING
9B.	7J-1309	[1]	BEARING
10.	110-4771	[1]	HEAD
11.	328-4266	[1]	CYLINDER AS-HYDRAULIC
11A.	9T-7045	[2]	ELBOW
11B.	8T-7567	[1]	RING-RETAINING (INTERNAL)
11C.	160-0305	[1]	BEARING
12.	225-3281	[1]	SEAL-WIPER
13.	167-2312	[1]	SEAL-U-CUP
14.	167-2201	[1]	SEAL AS-BUFFER
15.	8T-5668	[1]	RING-WEAR
16.	329-5398	[1]	CROWN

#SEBP45170512

169-4019: FILTER GP-OIL

FILTER GP-OIL

169-4019 FILTER GP-OIL -CASE DRAIN
S/N DJA1-UP; DJY1-UP
PART OF 268-1133 LINES GP-PUMP

i01434594 SEBP4517

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9T-8578	[1]	FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC)
			-OR-
	144-0832 A	[1]	FILTER-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC)
	A		NOT PART OF THIS GROUP

#SEBP45170513

313-1270: HYDRAULIC AR

HYDRAULIC AR

313-1270 HYDRAULIC AR -RIPPER
S/N DJA1-UP; DJY1-UP
FOR USE WITH @@@@@313-1273@@@@@, TRACTOR WINCH READY, TRACTOR WINCH PREPARATION
CANNOT BE USED WITH COVER CONSOLE RIPPER, COVER CONSOLE WINCH RIPPER
AN ATTACHMENT

i02858380 SEBP4517

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	313-1271 Y	[1]	LINES GP-PILOT
2.	313-1272 Y	[1]	CONTROL GP-JOYSTICK
	Y		SEPARATE ILLUSTRATION

#SEBP45170514

273-0562: HYDRAULIC AR-2 VALVE

HYDRAULIC AR-2 VALVE

273-0562 HYDRAULIC AR-2 VALVE
S/N DJA1-UP; DJY1-UP
FOR USE WITH BULLDOZER-SEMI-UNIVERSAL
CANNOT BE USED WITH RIPPER, HYDRAULIC AR-4V
AN ATTACHMENT

i02555034 SEBP4517

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
254-8440 Y	[1]	CONTROL AR-PILOT HYDRAULIC (BULLDOZER)
230-8750 Y	[1]	LINES GP-PILOT
289-2323 Y	[1]	LINES GP-TILT CYLINDER

	[2]	PLUG AS
		(EACH INCLUDES)
9S-4183	[1]	PLUG (1-1/16-12-THD)
3D-2824	[1]	SEAL-O-RING
Y		SEPARATE ILLUSTRATION

#SEBP45170515

241-3082: HYDRAULIC AR-3 VALVE

HYDRAULIC AR-3 VALVE

241-3082 HYDRAULIC AR-3 VALVE
S/N DJA1-UP; DJY1-UP
PART OF 246-2453, 246-8488 GENERAL AR

i02546895 SEBP4517

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
236-2078 Y	[1]	CONTROL AR-PILOT HYDRAULIC
273-8325 Y	[1]	LINES GP-ANGLE & TILT
261-6641 Y	[1]	LINES GP-DIAGNOSTIC (REMOTE PRESSURE TAPS)
230-8748 Y	[1]	LINES GP-LIFT CYLINDER
261-5833 Y	[1]	LINES GP-PILOT
268-1133 Y	[1]	LINES GP-PUMP
270-4281 Y	[1]	LINES GP-STEERING
191-9536 Y	[1]	MOTOR GP-PISTON (STEERING)
231-0451 Y	[1]	MOUNTING GP-VALVE
257-8470 Y	[1]	PUMP GP-PISTON (STEERING)
230-9131 Y	[1]	TANK & FILTER GP-HYDRAULIC
246-4206 Y	[1]	VALVE GP-BANK 3 (BULLDOZER CONTROL)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP45170516

230-2140: HYDRAULIC AR-4 VALVE

HYDRAULIC AR-4 VALVE

230-2140 HYDRAULIC AR-4 VALVE
S/N DJA1-UP; DJY1-UP
PROVIDE AN OPTIONAL PILOT CONTROL FOR THE RIPPER
FOR USE WITH HYDRAULIC AR-BLADE CONTROL, COVER GP CONSOLE (IMP), INSTALLATION AR (WINCH ELEC)
CANNOT BE USED WITH WINCH AR TOWING, COVER GP CONSOLE (WINCH), INSTALLATION AR WINCH
AN ATTACHMENT

i02061158 SEBP4517

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
238-0962 Y	[1]	CONTROL AR-PILOT HYDRAULIC (RIPPER)
230-8752 Y	[1]	LINES GP-RIPPER
246-4208 Y	[1]	VALVE GP-BANK 4 (BULLDOZER, RIPPER)
Y		SEPARATE ILLUSTRATION

#SEBP45170517

273-0561: HYDRAULIC AR-4 VALVE

HYDRAULIC AR-4 VALVE

273-0561 HYDRAULIC AR-4 VALVE
S/N DJA1-UP; DJY1-UP
FOR USE WITH BULLDOZER-SEMI-UNIVERSAL, COVER GP-CONSOLE(RIPPER)
CANNOT BE USED WITH HYDRAULIC AR-2V, WINCH AR-TOWING, COVER GP-CONSOLE(WINCH)
AN ATTACHMENT

i02554982 SEBP4517

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
238-0962 Y	[1]	CONTROL AR-PILOT HYDRAULIC (RIPPER)
254-8440 Y	[1]	CONTROL AR-PILOT HYDRAULIC (BULLDOZER)
230-8752 Y	[1]	LINES GP-RIPPER
289-2323 Y	[1]	LINES GP-TILT CYLINDER
246-4208 Y	[1]	VALVE GP-BANK 4 (BULLDOZER, RIPPER)

	[2]	PLUG AS
		(EACH INCLUDES)
9S-4183	[1]	PLUG (1-1/16-12-THD)
3D-2824	[1]	SEAL-O-RING
Y		SEPARATE ILLUSTRATION

#SEBP45170518

248-4204: LEVER GP-CONTROL VALVE

LEVER GP-CONTROL VALVE

248-4204 LEVER GP-CONTROL VALVE -BULLDOZER CONTROL
S/N DJA1-UP; DJY1-UP
PART OF 235-0889 VALVE GP-PILOT
AN ATTACHMENT

i02130796 SEBP4517

2484204 LEVER GP-CONTROL VALVE Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	146-6315	[3]	PIN-ADJUSTMENT
2.	146-6317	[1]	RETAINER
3.	159-3781	[1]	SPRING
4.	199-7834	[1]	DETENT AS
	8S-7499	[2]	PIN-SPRING
5.	260-1847	[1]	LEVER AS
6.	239-9219	[1]	LEVER
7.	191-8920 M	[2]	BOLT-SOCKET HEAD (M6X1X12-MM)
8.	5C-2890 M	[3]	NUT (M6X1-THD)
9.	8T-4244 M	[1]	NUT (M12X1.75-THD)
	M		METRIC PART

#SEBP45170519

260-1848: LEVER GP-CONTROL VALVE

LEVER GP-CONTROL VALVE

260-1848 LEVER GP-CONTROL VALVE -BULLDOZER
S/N DJA1-UP; DJY1-UP
PART OF 240-9651, 297-1410 VALVE GP-PILOT
ALSO AN ATTACHMENT

i02464140 SEBP4517

2601848 LEVER GP-CONTROL VALVE Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	146-6315	[3]	PIN-ADJUSTMENT
2.	146-6317	[1]	RETAINER
3.	159-3781	[1]	SPRING
4.	8T-4244 M	[1]	NUT (M12X1.75-THD)
5.	199-7834	[1]	DETENT AS
	8S-7499	[2]	PIN-SPRING
6.	239-9219	[1]	LEVER
7.	260-1847	[1]	LEVER AS
8.	191-8920 M	[2]	BOLT-SOCKET HEAD (M6X1X12-MM)
9.	5C-2890 M	[3]	NUT (M6X1-THD)
	M		METRIC PART