WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)BLADE GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
#SEBP45170760
286-2050: BIT-END
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP45170761
462-4828: BIT-END
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP45170762
462-4829: BIT-END
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP45170763
235-5000: BLADE & EDGE GP-ANGLING
235-5000 BLADE & EDGE GP-ANGLING -LASER APPLICATION
S/N G6M1-UP
PART OF 225-8291 BULLDOZER AR-ANGLING
Type 1
FOR USE WITH @@@@@287-2968@@@@@, @@@@@273-2009@@@@@, GRADE CONTROL AR, XL
AN ATTACHMENT
S/N G6M1-UP
PART OF 225-8291 BULLDOZER AR-ANGLING
Type 1
FOR USE WITH @@@@@287-2968@@@@@, @@@@@273-2009@@@@@, GRADE CONTROL AR, XL
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF)(BEARING) | |
| 2. | 3G-8932 | [2] | PIN | |
| 3. | 4T-0231 | [2] | RETAINER | |
| 4. | 8E-9380 Y | [1] | EDGE GP-BIT & CUTTING | |
| 5. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 6. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 7. | 104-4817 | [2] | PIN | |
| 8. | 104-7434 | [2] | RETAINER | |
| 9. | 197-6440 | [1] | BEARING | |
| 10. | 235-5005 Y | [1] | BLADE AS-ANGLING | |
| 11. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 12. | 8J-8905 | [1] | RING-LOCK | |
| 13. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45170764
235-5000: BLADE & EDGE GP-ANGLING
235-5000 BLADE & EDGE GP-ANGLING -LASER APPLICATION
S/N G6M1-UP
PART OF 225-8291 BULLDOZER AR-ANGLING
Type 2
FOR USE WITH @@@@@287-2968@@@@@, @@@@@273-2009@@@@@, GRADE CONTROL AR, XL
AN ATTACHMENT
S/N G6M1-UP
PART OF 225-8291 BULLDOZER AR-ANGLING
Type 2
FOR USE WITH @@@@@287-2968@@@@@, @@@@@273-2009@@@@@, GRADE CONTROL AR, XL
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [2] | PIN | |
| 3. | 4T-0231 | [2] | RETAINER | |
| 4. | 8E-9380 Y | [1] | EDGE GP-BIT & CUTTING | |
| 5. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 6. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 7. | 104-4817 | [2] | PIN | |
| 8. | 104-7434 | [2] | RETAINER | |
| 9. | 197-6440 | [1] | BEARING | |
| 10. | 266-9599 C | [1] | RETAINER | |
| 11. | 296-5099 CY | [1] | BLADE AS-ANGLING | |
| 12. | 9X-8271 CM | [8] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| (ON THE LEFT TOP CORNER OF STRAIGHT VPAT BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45170765
235-5000: BLADE & EDGE GP-ANGLING
235-5000 BLADE & EDGE GP-ANGLING -LASER APPLICATION
S/N G6M1-UP
PART OF 225-8291 BULLDOZER AR-ANGLING
Type 3
FOR USE WITH @@@@@287-2968@@@@@, @@@@@273-2009@@@@@, GRADE CONTROL AR, XL
AN ATTACHMENT
S/N G6M1-UP
PART OF 225-8291 BULLDOZER AR-ANGLING
Type 3
FOR USE WITH @@@@@287-2968@@@@@, @@@@@273-2009@@@@@, GRADE CONTROL AR, XL
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 C | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [2] | PIN | |
| 3. | 4T-0231 | [2] | RETAINER | |
| 4. | 8E-9380 Y | [1] | EDGE GP-BIT & CUTTING | |
| 5. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 6. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 7. | 104-4817 | [2] | PIN | |
| 8. | 104-7434 | [2] | RETAINER | |
| 9. | 197-6440 | [1] | BEARING | |
| 10. | 376-6434 | [1] | RETAINER | |
| 11. | 296-5099 Y | [1] | BLADE AS-ANGLING | |
| 12. | 9X-8271 CM | [10] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 16. | 2Y-9790 | [1] | PLATE-SERIAL NUMBER (BLADE) | |
| 16A. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45170766
235-5000: BLADE & EDGE GP-ANGLING
235-5000 BLADE & EDGE GP-ANGLING -LASER APPLICATION
S/N G6M1-UP
PART OF 225-8291 BULLDOZER AR-ANGLING
Type 4
FOR USE WITH @@@@@287-2968@@@@@, @@@@@273-2009@@@@@, GRADE CONTROL AR, XL
AN ATTACHMENT
S/N G6M1-UP
PART OF 225-8291 BULLDOZER AR-ANGLING
Type 4
FOR USE WITH @@@@@287-2968@@@@@, @@@@@273-2009@@@@@, GRADE CONTROL AR, XL
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [2] | PIN | |
| 3. | 4T-0231 | [2] | RETAINER | |
| 4. | 8E-9380 Y | [1] | EDGE GP-BIT & CUTTING | |
| 5. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 6. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 7. | 104-4817 | [2] | PIN | |
| 8. | 104-7434 | [2] | RETAINER | |
| 9. | 197-6440 | [1] | BEARING | |
| 10. | 376-6434 | [1] | RETAINER | |
| 11. | 296-5099 Y | [1] | BLADE AS-ANGLING | |
| 12. | 9X-8271 M | [10] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 16. | 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | |
| 16A. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45170767
115-4594: BLADE & EDGE GP-SEMI-UNIVERSAL
115-4594 BLADE & EDGE GP-SEMI-UNIVERSAL
S/N DJA1-UP; S6A1-UP
PART OF 273-0030 BULLDOZER AR-SEMI-UNIVERSAL
CANNOT BE USED WITH GRADE CONTROL AR
AN ATTACHMENT
S/N DJA1-UP; S6A1-UP
PART OF 273-0030 BULLDOZER AR-SEMI-UNIVERSAL
CANNOT BE USED WITH GRADE CONTROL AR
AN ATTACHMENT
For full view, you need register
#SEBP45170768
235-5005: BLADE AS-ANGLING
235-5005 BLADE AS-ANGLING -LASER APPLICATION
S/N G6M1-UP
PART OF 235-5000 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
S/N G6M1-UP
PART OF 235-5000 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-5229 | [1] | BLADE AS-ANGLING | |
| 1A. | 8E-9502 | [1] | SUPPORT | |
| 1B. | 8P-9770 | [1] | PLATE | |
| 1C. | 110-5227 | [1] | BRACKET AS (CENTER) | |
| 1D. | 110-5228 | [1] | BRACKET AS (TILT CYLINDER) | |
| 2. | 240-1557 | [1] | BRACKET AS | |
| 3. | 250-5478 | [1] | BRACKET AS (LH) | |
| 4. | 250-5479 | [1] | BRACKET AS (RH) | |
| 5. | 250-5480 | [1] | BRACKET AS (CENTER) |
#SEBP45170769
296-5099: BLADE AS-ANGLING
296-5099 BLADE AS-ANGLING -LASER APPLICATION
S/N G6M1-UP
PART OF 235-5000 BLADE & EDGE GP-ANGLING
Type 1
AN ATTACHMENT
S/N G6M1-UP
PART OF 235-5000 BLADE & EDGE GP-ANGLING
Type 1
AN ATTACHMENT
For full view, you need register
