AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

258-4009 COVER GP-INSTRUMENT PANEL S/N GCP1-UP PART OF 258-3756, 258-3760, 320-8504, 320-8507 MACHINE AR-SPECIAL, 365-1762, 365-1764 OPTION AR-MACHINE AN ATTACHMENT 297C


ELECTRICAL AND STARTING SYSTEM
WIRING GP
OPERATOR STATION
DOOR GP

MULTI TERRAIN LOADER 297C MULTI TERRAIN LOADER GCP
 297C Multi Terrain Loader GCP00001-UP (MACHINE) POWERED BY 3044C Engine SEBP4518 297C GCP   (2007)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
CONTROL & WIRING GP-AIR & TEMP
266-2430 CONTROL & WIRING GP-AIR & TEMP
CONTROL & WIRING GP-AIR & TEMP
266-2430 CONTROL & WIRING GP-AIR & TEMP
COVER GP-INSTRUMENT PANEL
258-4009 COVER GP-INSTRUMENT PANEL
INSTALLATION GP-RADIO
258-4066 INSTALLATION GP-RADIO
INSTALLATION GP-RADIO
337-3991 INSTALLATION GP-RADIO
280-6079 KIT-AIR COND & HEATER INSTL
 

#SEBP45180790
 

258-4009: COVER GP-INSTRUMENT PANEL

258-4009 COVER GP-INSTRUMENT PANEL
S/N GCP1-UP
PART OF 258-3756, 258-3760, 320-8504, 320-8507 MACHINE AR-SPECIAL, 365-1762, 365-1764 OPTION AR-MACHINE
AN ATTACHMENT
i02630066 SEBP4518
2584009 COVER GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your 297C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-2356 [6] PLUG  
2. 258-4033 [1] COVER (CLUSTER)  
 

#SEBP45180791
 

258-4070: DOOR & MTG GP-CAB

258-4070 DOOR & MTG GP-CAB -WITH CAB TILT GAS SPRING
S/N GCP1-UP
CANNOT BE USED WITH @@@@@258-4080@@@@@, @@@@@258-3741@@@@@
AN ATTACHMENT
i02615734 SEBP4518
2584070 DOOR & MTG GP-CAB Parts scheme
  For full view, you need register

Parts for your 297C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 215-6406 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
3. 388-8028 [1] SPACER (10X20X6-MM THK)  
5. 8T-2444 [2] STUD-BALL  
6. 095-1325 [1] PIN-CLEVIS  
7. 4E-8722 [1] NUT (RETAINER)  
8. 153-2682 [2] SPRING AS-GAS (CAB)  
9. 198-1725 [4] WASHER-HARD (8.8X25.5X2-M THK)  
10. 206-1345 [4] STRAP-CABLE  
11. 258-3281 [1] BRACKET AS  
12. 258-3725 [1] HINGE  
13. 258-3726 [2] PIN  
14. 258-3761 [1] SPRING AS-GAS  
15. 258-3764 [1] STRIKER AS  
16. 258-4078 [1] TANK AS-WINDOW WASHER  
  6T-1375 [1] PUMP AS-WASHER  
  8E-8293 [1] GROMMET  
  258-3296 [1] CAP-VENTED (WASHER)  
17. 258-4086 Y [1] DOOR GP-CAB (GLASS)  
18. 258-4141 [2] CLIP  
19. 258-4157 Y [1] HARNESS AS-CAB  
20. 258-4356 [1] BRACKET AS  
21. 284-7932 [1] FILM-NOTICE (ALTERNATE EXIT, READ OMM)  
22. 127-2170 M [4] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
23. 5P-0372 [4] LOCK PIN  
24. 6L-3966 [3] PIN  
25. 8S-7803 [2] RING-RETAINING  
26. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
28. 8T-4244 M [1] NUT (M12X1.75-THD)  
29. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
30. 144-0195 E HOSE (90-CM)  
31. 198-1725 B [2] WASHER-HARD (8.8X25.5X2-M THK)  
32. 8T-6936 D SEAL (0.05-M EACH)  
33. 388-8018 [2] SPACER (12.7X22X19.1MM THK)  
34. 388-8019 [5] WASHER (10.5X20X2-MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45180792
 

258-4080: DOOR & MTG GP-CAB

258-4080 DOOR & MTG GP-CAB -WITH CAB TILT GAS SPRING
S/N GCP1-UP
CANNOT BE USED WITH @@@@@258-4070@@@@@, @@@@@258-3741@@@@@
AN ATTACHMENT
i02615735 SEBP4518
2584080 DOOR & MTG GP-CAB Parts scheme
  For full view, you need register

Parts for your 297C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 388-8028 [1] SPACER (10X20X6-MM THK)  
3. 388-8018 [2] SPACER (12.7X22X19.1MM THK)  
4. 8T-2444 [2] STUD-BALL  
5. 095-1325 [1] PIN-CLEVIS  
6. 139-6039 [1] NUT-RETAINER (U-TYPE)  
7. 153-2682 [2] SPRING AS-GAS (CAB)  
8. 198-1725 [4] WASHER-HARD (8.8X25.5X2-M THK)  
9. 206-1345 [4] STRAP-CABLE  
10. 258-3281 [1] BRACKET AS  
11. 258-3725 [1] HINGE  
12. 258-3726 [2] PIN  
13. 258-3761 [1] SPRING AS-GAS (DOOR)  
14. 258-3764 [1] STRIKER AS  
15. 258-4078 [1] TANK AS-WINDOW WASHER  
  6T-1375 [1] PUMP AS-WASHER  
  8E-8293 [1] GROMMET  
  258-3296 [1] CAP-VENTED (WASHER)  
16. 258-4087 Y [1] DOOR GP-CAB (POLYCARBONATE)  
17. 258-4141 [2] CLIP  
18. 258-4157 Y [1] HARNESS AS-CAB  
19. 258-4356 [1] BRACKET AS  
20. 284-7932 [1] FILM-NOTICE (ALTERNATE EXIT, READ OMM)  
21. 127-2170 M [4] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
22. 215-6406 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
23. 5P-0372 [4] LOCK PIN  
24. 6L-3966 [3] PIN  
25. 8S-7803 [2] RING-RETAINING  
26. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
27. 8T-4244 M [1] NUT (M12X1.75-THD)  
28. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
29. 144-0195 E HOSE (90-CM)  
30. 198-1725 B [2] WASHER-HARD (8.8X25.5X2-M THK)  
31. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-6936 D SEAL (0.1-M)  
33. 388-8019 [5] WASHER (10.5X20X2-MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45180793
 

258-4440: DOOR & MTG GP-CAB

258-4440 DOOR & MTG GP-CAB -WITH CAB TILT GAS SPRING
S/N GCP1190-UP
CANNOT BE USED WITH @@@@@258-4070@@@@@, @@@@@258-4080@@@@@, @@@@@258-3741@@@@@
AN ATTACHMENT
i02879593 SEBP4518
2584440 DOOR & MTG GP-CAB Parts scheme
  For full view, you need register

Parts for your 297C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 388-8028 [1] SPACER (10X20X6-MM THK)  
2. 388-8019 [5] WASHER (10.5X20X2-MM THK)  
3. 8T-2444 [2] STUD-BALL  
4. 172-8591 M [1] NUT-CLIP (M6X1-THD)  
5. 153-2682 [2] SPRING AS-GAS (CAB)  
6. 206-1345 [4] STRAP-CABLE  
7. 258-3281 [1] BRACKET AS  
8. 258-3725 [1] HINGE  
9. 258-3726 [2] PIN  
10. 258-3761 [1] SPRING AS-GAS (DOOR)  
11. 258-3764 [1] STRIKER AS  
12. 258-4078 [1] TANK AS-WINDOW WASHER  
  6T-1375 [1] PUMP AS-WASHER  
  8E-8293 [1] GROMMET  
  258-3296 [1] CAP-VENTED (WASHER)  
13. 258-4141 [2] CLIP  
14. 258-4157 Y [1] HARNESS AS-CAB  
15. 258-4356 [1] BRACKET AS  
16. 258-4442 Y [1] DOOR GP-CAB (GLASS)  
17. 284-7932 [1] FILM-NOTICE (ALTERNATE EXIT, READ OMM)  
18. 095-1325 [1] PIN-CLEVIS  
19. 127-2170 M [4] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
20. 7X-0579 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
21. 215-6406 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
22. 5C-2890 M [1] NUT (M6X1-THD)  
23. 5P-0372 [4] LOCK PIN  
24. 6L-3966 [3] PIN  
25. 8S-7803 [2] RING-RETAINING  
26. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8T-4244 M [1] NUT (M12X1.75-THD)  
28. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
29. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
30. 7X-0579 B [2] WASHER-HARD (8.8X25.5X2-MM THK)  
31. 144-0195 E HOSE (90-CM)  
32. 8T-6936 D SEAL (0.1-M EACH)  
33. 388-8018 [2] SPACER (12.7X22X19.1MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45180794
 

258-4086: DOOR GP-CAB

258-4086 DOOR GP-CAB -GLASS
S/N GCP1-1527
PART OF 258-4070 DOOR & MTG GP-CAB, 258-2473 KIT-CAB DOOR & MOUNTING
AN ATTACHMENT
i02636767 SEBP4518
2584086 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 297C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [2] NUT (M6X1-THD)  
2. 8G-1151 [1] CONNECTOR-HOSE  
3. 8Y-4615 [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
4. 129-8542 [2] RETAINER  
5. 129-8545 [2] WASHER (13X40X3-MM THK)  
6. 136-4192 M [1] BOLT (M6X1X35-MM)  
7. 154-5423 B [1] SPACER (6.6X12.7X17-MM THK)  
8. 206-1345 [2] STRAP-CABLE  
9. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
10. 229-8757 [1] SWITCH AS-LIMIT (DOOR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 252-1862 J [1] HANDLE AS-PULL (PULL)  
12. 253-1817 B [1] SPACER (6.5X14.5X12-MM THK)  
13. 258-3280 [1] LATCH AS (INNER)  
14. 258-3288 [1] HANDLE AS (LOWER)  
15. 258-3289 [2] LATCH AS (OUTER)  
16. 258-3290 [1] GASKET  
17. 258-3294 [1] HANDLE AS (UPPER)  
18. 258-3298 [1] GROMMET  
19. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
20. 258-3762 [2] GROMMET  
21. 258-4013 [1] BRACKET AS  
22. 258-4014 [1] HINGE (LOWER)  
23. 258-4016 [1] COVER (WIPER)  
24. 258-4071 [1] GLASS (DOOR)  
25. 258-4073 [1] HINGE (UPPER)  
26. 258-4075 [4] GASKET  
27. 258-4076 [1] HANDLE AS  
28. 258-4082 [1] GASKET  
29. 258-4083 [1] COVER-LATCH  
30. 258-4084 [1] BRACKET  
31. 258-4085 [2] BUSHING  
32. 258-4156 [1] HARNESS AS-CAB (DOOR, FRONT)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [5] STRAP-CABLE (WHITE)  
  091-2436 [4] TERMINAL-BLADE (18-GA TO 22-GA)  
  104-1995 [3] TERMINAL-BLADE (14-GA TO 18-GA)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  180-9339 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  180-9340 [3] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  228-5856 [1] CONNECTOR (10-PIN)  
33. 264-4407 [1] MOTOR GP-WINDOW WIPER (CAB DOOR)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3F-9556 [1] LOCKWASHER  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  263-3823 [1] CAP-WIPER  
34. 264-4408 [1] ARM GP-WINDOW WIPER (CAB DOOR)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
35. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)(WIPER)  
  111-7899 [1] GASKET  
36. 292-6936 M [1] BOLT (M6X1X70-MM)  
37. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
38. 3S-2093 [2] STRAP-CABLE  
39. 6V-7357 M [4] BOLT (M6X1X25-MM)  
40. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
41. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
42. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 258-4430 E SEAL (329-CM)  
44. 129-3178 M [1] LOCKNUT (M6X1-THD)  
45. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP45180795
 

258-4086: DOOR GP-CAB

258-4086 DOOR GP-CAB -GLASS
S/N GCP1528-UP
PART OF 258-4070 DOOR & MTG GP-CAB, 258-2473 KIT-CAB DOOR & MOUNTING
AN ATTACHMENT
i03378864 SEBP4518
2584086 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 297C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [2] NUT (M6X1-THD)  
2. 8G-1151 [1] CONNECTOR-HOSE  
3. 322-9633 C [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
4. 129-8542 [2] RETAINER  
5. 129-8545 [2] WASHER (13X40X3-MM THK)  
6. 136-4192 M [1] BOLT (M6X1X35-MM)  
7. 395-0687 [1] SPACER (6.6X12.7X15.9-MM THK)  
8. 206-1345 [2] STRAP-CABLE  
9. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
10. 229-8757 [1] SWITCH AS-LIMIT (DOOR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 252-1862 J [1] HANDLE AS-PULL  
12. 253-1817 [1] SPACER (6.5X14.5X12-MM THK)  
13. 258-3280 [1] LATCH AS (INNER)  
14. 364-1821 [1] HANDLE AS  
15. 258-3289 [2] LATCH AS (OUTER)  
16. 258-3290 [1] GASKET  
17. 364-1822 [1] HANDLE AS  
18. 258-3298 [1] GROMMET  
19. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
20. 331-8050 [2] BUMPER  
21. 258-4013 [1] BRACKET AS  
  159-9540 M [1] NUT-WELD (M8X1.25-THD)  
22. 258-4014 [1] HINGE (LOWER)  
23. 258-4016 [1] COVER (WIPER)  
24. 258-4071 [1] GLASS (DOOR)  
25. 258-4073 [1] HINGE (UPPER)  
26. 258-4075 [4] GASKET  
27. 258-4076 [1] HANDLE AS  
28. 258-4082 [1] GASKET  
29. 258-4083 [1] COVER-LATCH  
30. 258-4084 [1] BRACKET  
31. 258-4085 [2] BUSHING  
32. 258-4156 Y [1] HARNESS AS-CAB (DOOR, FRONT)  
33. 330-5011 CY [1] MOTOR GP-WINDOW WIPER (12-VOLT)(CAB DOOR)  
34. 264-4408 [1] ARM GP-WINDOW WIPER (CAB DOOR)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
35. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)  
  111-7899 [1] GASKET  
36. 292-6936 M [1] BOLT (M6X1X70-MM)  
37. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
38. 3S-2093 [2] STRAP-CABLE  
39. 6V-7357 M [4] BOLT (M6X1X25-MM)  
40. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
41. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
42. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 398-1530 E SEAL (329-CM)  
44. 129-3178 M [1] LOCKNUT (M6X1-THD)  
45. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
46. 8S-3193 [2] NUT-PUSH ON  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45180796
 

258-4087: DOOR GP-CAB

258-4087 DOOR GP-CAB -POLYCARBONATE
S/N GCP1-UP
PART OF 258-4080 DOOR & MTG GP-CAB, 280-6084 KIT-CAB DOOR & MOUNTING
Type 1
AN ATTACHMENT
i02618763 SEBP4518
2584087 DOOR GP-CAB Parts scheme 2584087 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 297C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [2] NUT (M6X1-THD)  
2. 8G-1151 [1] CONNECTOR-HOSE  
3. 8Y-4615 [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
4. 129-8542 [2] RETAINER  
5. 129-8545 [2] WASHER (13X40X3-MM THK)  
6. 136-4192 M [1] BOLT (M6X1X35-MM)  
7. 154-5423 B [1] SPACER (6.6X12.7X17-MM THK)  
8. 206-1345 [2] STRAP-CABLE  
9. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
10. 229-8757 [1] SWITCH AS-LIMIT  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
11. 252-1862 J [1] HANDLE AS-PULL (PULL)  
12. 253-1817 B [1] SPACER (6.5X14.5X12-MM THK)  
13. 258-3280 [1] LATCH AS (INNER)  
14. 258-3288 [1] HANDLE AS (LOWER)  
15. 258-3289 [2] LATCH AS (OUTER)  
16. 258-3290 [1] GASKET  
17. 258-3294 [1] HANDLE AS (UPPER)  
18. 258-3298 [1] GROMMET  
19. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
20. 258-3762 [2] GROMMET  
21. 258-4013 [1] BRACKET AS  
22. 258-4014 [1] HINGE (LOWER)  
23. 258-4016 [1] COVER (WIPER)  
24. 258-4073 [1] HINGE (UPPER)  
25. 258-4075 [4] GASKET  
26. 258-4076 [1] HANDLE AS  
27. 258-4081 [1] WINDOW  
28. 258-4082 [1] GASKET  
29. 258-4083 [1] COVER-LATCH  
30. 258-4084 [1] BRACKET  
31. 258-4085 [2] BUSHING  
32. 258-4156 Y [1] HARNESS AS-CAB (DOOR, FRONT)  
33. 264-4407 [1] MOTOR GP-WINDOW WIPER (CAB DOOR)  
  3F-9556 [1] LOCKWASHER  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  263-3823 [1] CAP-WIPER  
34. 264-4408 [1] ARM GP-WINDOW WIPER (CAB DOOR)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
35. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)  
  111-7899 [1] GASKET  
36. 292-6936 M [1] BOLT (M6X1X70-MM)  
37. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
38. 3S-2093 [2] STRAP-CABLE  
39. 6V-7357 M [4] BOLT (M6X1X25-MM)  
40. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
41. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
42. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 258-4430 E SEAL (331-CM)  
44. 129-3178 M [1] LOCKNUT (M6X1-THD)  
45. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45180797
 

258-4087: DOOR GP-CAB

258-4087 DOOR GP-CAB -POLYCARBONATE
S/N GCP1-UP
PART OF 258-4080 DOOR & MTG GP-CAB, 280-6084 KIT-CAB DOOR & MOUNTING
Type 2
AN ATTACHMENT
i03261486 SEBP4518
2584087 DOOR GP-CAB Parts scheme 2584087 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 297C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [2] NUT (M6X1-THD)  
2. 8G-1151 [1] CONNECTOR-HOSE  
3. 322-9633 C [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
4. 129-8542 [2] RETAINER  
5. 129-8545 [2] WASHER (13X40X3-MM THK)  
6. 136-4192 M [1] BOLT (M6X1X35-MM)  
7. 395-0687 [1] SPACER (6.6X12.7X15.9-MM THK)  
8. 206-1345 [2] STRAP-CABLE  
9. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
10. 229-8757 [1] SWITCH AS-LIMIT (DOOR)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
11. 252-1862 J [1] HANDLE AS-PULL  
12. 253-1817 [1] SPACER (6.5X14.5X12-MM THK)  
13. 258-3280 [1] LATCH AS (INNER)  
14. 364-1821 [1] HANDLE AS  
15. 258-3289 [2] LATCH AS (OUTER)  
16. 258-3290 [1] GASKET  
17. 364-1822 [1] HANDLE AS  
18. 258-3298 [1] GROMMET  
19. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
20. 331-8050 [2] BUMPER  
21. 258-4013 [1] BRACKET AS  
  159-9540 M [1] NUT-WELD (M8X1.25-THD)  
22. 258-4014 [1] HINGE (LOWER)  
23. 258-4016 [1] COVER (WIPER)  
24. 258-4073 [1] HINGE (UPPER)  
25. 258-4075 [4] GASKET  
26. 258-4076 [1] HANDLE AS  
27. 258-4081 [1] WINDOW  
28. 258-4082 [1] GASKET  
29. 258-4083 [1] COVER-LATCH  
30. 258-4084 [1] BRACKET  
31. 258-4085 [2] BUSHING  
32. 258-4156 Y [1] HARNESS AS-CAB (DOOR, FRONT)  
33. 330-5011 CY [1] MOTOR GP-WINDOW WIPER (12-VOLT)(CAB DOOR)  
34. 264-4408 [1] ARM GP-WINDOW WIPER (CAB DOOR)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
35. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)(FRONT WIPER/WASHER)  
  111-7899 [1] GASKET  
36. 292-6936 M [1] BOLT (M6X1X70-MM)  
37. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
38. 3S-2093 [2] STRAP-CABLE  
39. 6V-7357 M [4] BOLT (M6X1X25-MM)  
40. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
41. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
42. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 386-6028 E SEAL (329-CM)  
44. 129-3178 M [1] LOCKNUT (M6X1-THD)  
45. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
46. 8S-3193 [2] NUT-PUSH ON  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45180798
 

258-4442: DOOR GP-CAB

258-4442 DOOR GP-CAB
S/N GCP1-UP
PART OF 258-4440 DOOR & MTG GP-CAB, 258-4443 KIT-CAB DOOR & MOUNTING
Type 1
AN ATTACHMENT
i02858649 SEBP4518
2584442 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 297C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8G-1151 [1] CONNECTOR-HOSE  
2. 8Y-4615 [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
3. 129-8542 [2] RETAINER (GLASS MOUNT)  
4. 129-8545 [2] WASHER (13X40X3-MM THK)  
5. 136-4192 M [1] BOLT (M6X1X35-MM)  
6. 154-5423 [1] SPACER (6.6X12.7X17-MM THK)  
7. 206-1345 [2] STRAP-CABLE  
8. 229-8757 [1] SWITCH AS-LIMIT (WIPER)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 252-1862 J [1] HANDLE AS-PULL (PULL)  
10. 253-1817 [1] SPACER (6.5X14.5X12-MM THK)  
11. 258-3280 [1] LATCH AS (INNER)  
12. 258-3288 [1] HANDLE AS (LOWER)  
13. 258-3289 [2] LATCH AS (OUTER)  
14. 258-3290 [1] GASKET  
15. 258-3294 [1] HANDLE AS (UPPER)  
16. 258-3298 [1] GROMMET  
17. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
18. 258-3762 [2] GROMMET  
19. 258-4013 [1] BRACKET AS  
20. 258-4014 [1] HINGE (LOWER)  
21. 258-4016 [1] COVER (WIPER)  
22. 258-4073 [1] HINGE (UPPER)  
23. 258-4075 [4] GASKET  
24. 258-4076 [1] HANDLE AS  
25. 258-4082 [1] GASKET  
26. 258-4083 [1] COVER-LATCH  
27. 258-4084 [1] BRACKET  
28. 258-4085 [2] BUSHING  
29. 258-4156 Y [1] HARNESS AS-CAB (DOOR, FRONT)  
30. 258-4441 [1] GLASS (CLEAR)  
31. 264-4407 [1] MOTOR GP-WINDOW WIPER (CAB DOOR)  
  3F-9556 [1] LOCKWASHER  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  263-3823 [1] CAP-WIPER  
32. 264-4408 [1] ARM GP-WINDOW WIPER (WET)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
33. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)  
  111-7899 [1] GASKET  
34. 292-6936 M [1] BOLT (M6X1X70-MM)  
35. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
36. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
  8C-3334 [1] RIVET-TUBULAR  
37. 129-3178 M [1] LOCKNUT (M6X1-THD)  
38. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
39. 3S-2093 [2] STRAP-CABLE  
40. 5C-2890 M [2] NUT (M6X1-THD)  
41. 6V-7357 M [4] BOLT (M6X1X25-MM)  
42. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
43. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
44. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
45. 258-4430 E SEAL (329-CM)  
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45180799
 

258-4442: DOOR GP-CAB

258-4442 DOOR GP-CAB
S/N GCP1-UP
PART OF 258-4440 DOOR & MTG GP-CAB
Type 2
AN ATTACHMENT
i03429810 SEBP4518
2584442 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 297C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8G-1151 [1] CONNECTOR-HOSE  
2. 322-9633 C [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
3. 129-8542 [2] RETAINER (MOUNT)  
4. 129-8545 [2] WASHER (13X40X3-MM THK)  
5. 136-4192 M [1] BOLT (M6X1X35-MM)  
6. 395-0687 [1] SPACER (6.6X12.7X15.9-MM THK)  
7. 206-1345 [2] STRAP-CABLE  
8. 229-8757 [1] SWITCH AS-LIMIT (DOOR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 252-1862 J [1] HANDLE AS-PULL  
10. 253-1817 [1] SPACER (6.5X14.5X12-MM THK)  
11. 258-3280 [1] LATCH AS (INNER)  
12. 364-1821 [1] HANDLE AS  
13. 258-3289 [2] LATCH AS (OUTER)  
14. 258-3290 [1] GASKET  
15. 364-1822 [1] HANDLE AS  
16. 258-3298 [1] GROMMET  
17. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
18. 331-8050 [2] BUMPER  
19. 258-4013 [1] BRACKET AS  
  159-9540 M [1] NUT-WELD (M8X1.25-THD)  
20. 258-4014 [1] HINGE (LOWER)  
21. 258-4016 [1] COVER (WIPER)  
22. 258-4073 [1] HINGE (UPPER)  
23. 258-4075 [4] GASKET  
24. 258-4076 [1] HANDLE AS  
25. 258-4082 [1] GASKET  
26. 258-4083 [1] COVER-LATCH  
27. 258-4084 [1] BRACKET  
28. 258-4085 [2] BUSHING  
29. 258-4156 Y [1] HARNESS AS-CAB (DOOR, FRONT)  
30. 258-4441 [1] GLASS (CLEAR)  
31. 330-5011 CY [1] MOTOR GP-WINDOW WIPER (12-VOLT)(CAB DOOR)  
32. 264-4408 [1] ARM GP-WINDOW WIPER (CAB DOOR)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
33. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)(FRONT WIPER, WASHER)  
  111-7899 [1] GASKET  
34. 292-6936 M [1] BOLT (M6X1X70-MM)  
35. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
36. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
37. 129-3178 M [1] LOCKNUT (M6X1-THD)  
38. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
39. 3S-2093 [2] STRAP-CABLE  
40. 5C-2890 M [2] NUT (M6X1-THD)  
41. 6V-7357 M [4] BOLT (M6X1X25-MM)  
42. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
43. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
44. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
45. 398-1530 E SEAL (329-CM)  
46. 8S-3193 [2] NUT-PUSH ON  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 297C :

COVER GP-CONSOLE
258-4314 COVER GP-CONSOLE
COVER GP-CAB
258-3268 COVER GP-CAB
CONTROL GP-JOYSTICK
269-0266 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
269-0265 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
269-0264 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
269-0263 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
269-0262 CONTROL GP-JOYSTICK
CONTROL GP-HANDLE
285-8630 CONTROL GP-HANDLE
DOOR & MTG GP-CAB
258-4070 DOOR & MTG GP-CAB
DOOR & MTG GP-CAB
258-4080 DOOR & MTG GP-CAB
DOOR & MTG GP-CAB
258-4440 DOOR & MTG GP-CAB
DOOR GP-CAB
258-4086 DOOR GP-CAB
DOOR GP-CAB
258-4086 DOOR GP-CAB
DOOR GP-CAB
258-4087 DOOR GP-CAB
DOOR GP-CAB
258-4087 DOOR GP-CAB
DOOR GP-CAB
258-4442 DOOR GP-CAB

Truck sale:

Caterpillar 297C
 
Caterpillar 297C
- Skid Steer Loaders
NMC
Caterpillar 297C HF, track loaders, Construction
42,375 
Caterpillar 297C HF, track loaders, Construction
- track loaders
WAGNER EQUIPMENT CO
 
55,000 
Caterpillar 297C, Skid Steer Loaders, Construction


 
 
Caterpillar 297C ZDC, track loaders, Construction


Caterpillar 297C
 
Caterpillar 297C
- track loaders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.