197-7415 MOUNTING GP-SENSOR -ATMOSPHERIC, ENGINE OIL S/N LHX3000-UP PART OF 221-0890, 283-2437 ENGINE AR-COMPLETE 365C L MH

197-7415: MOUNTING GP-SENSOR

197-7415 MOUNTING GP-SENSOR -ATMOSPHERIC, ENGINE OIL
S/N LHX3000-UP
PART OF 221-0890, 283-2437 ENGINE AR-COMPLETE

Parts for your 365C L MH EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	166-6693	[1]	ADAPTER
2.	1T-0720	[2]	BOLT-12 POINT HEAD (3/8-16X1.25-IN)
3.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
4.	6V-3683	[1]	SEAL-O-RING
5.	307-2671	[1]	PLUG AS
5A.	214-7566	[1]	SEAL-O-RING
	9S-8002	[1]	PLUG (7/16-20-THD)
6.	8J-4351	[1]	SEAL-O-RING

332-6780: MOUNTING GP-SENSOR

MOUNTING GP-SENSOR

332-6780 MOUNTING GP-SENSOR
S/N TXG142-UP; LHX20547-UP
PART OF 283-2437 ENGINE AR-COMPLETE

Parts for your 365C L MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	166-6693	[1]	ADAPTER
2.	1T-0720	[1]	BOLT-12 POINT HEAD (3/8-16X1.25-IN)
3.	5M-2894	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
4.	6V-3683	[1]	SEAL-O-RING
5.	307-2671	[1]	PLUG AS
	9S-8002	[1]	PLUG (7/16-20-THD)
	214-7566	[1]	SEAL-O-RING
6.	8J-4351	[1]	SEAL-O-RING

224-2861: PANEL GP-CIRCUIT BREAKER

PANEL GP-CIRCUIT BREAKER

224-2861 PANEL GP-CIRCUIT BREAKER
S/N GWC1-UP
PART OF 227-7121 BATTERY & WIRING GP

Parts for your 365C L MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-8320	[1]	PLATE-INSTRUCTION (BATTERY)
2.	3S-2093	[9]	STRAP-CABLE
3.	7N-0718 Y	[1]	SWITCH GP-DISCONNECT (BATTERY)
4.	7Y-5499	[1]	BLOCK AS-TERMINAL
5.	126-2941	[1]	RESISTOR AS
6.	105-9982	[1]	CLIP
7.	105-9983	[1]	CLIP
8.	105-9986	[2]	CLIP
9.	113-8490	[20]	FUSE (10-AMPERE)
10.	113-8491	[8]	FUSE (15-AMPERE)
11.	125-1302 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)
12.	136-4055	[1]	STRIP
13.	141-2759	[9]	FUSE (5-AMPERE)
14.	145-3084	[1]	RESISTOR AS
15.	149-5050	[1]	RELAY (24-VOLT)(AUTOLUBE)
16.	151-9360	[2]	RESISTOR AS
			(EACH INCLUDES)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
17.	161-3128	[1]	RELAY (24-VOLT)(CHASSIS FLOODLIGHT)
17A.	161-3128	[1]	RELAY (24-VOLT)(CAB FLOODLIGHT)
17B.	161-3128	[1]	RELAY (24-VOLT)(HYDRAULIC LOCK)
17C.	161-3128	[1]	RELAY (24-VOLT)(ETHER)
17D.	161-3128	[1]	RELAY (24-VOLT)(BOOM LAMP 1)
17E.	161-3128	[1]	RELAY (24-VOLT)(BOOM LAMP 2)
17F.	161-3128	[1]	RELAY (24-VOLT)(NEUTRAL START)
17G.	161-3128	[1]	RELAY (24-VOLT)(HORN)
18.	163-6703	[1]	TIMER AS-OFF DELAY
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
19.	163-6758	[1]	WIRE AS
20.	167-3593	[1]	STRAP
21.	170-6888	[1]	PULLER-FUSE
22.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(MAIN RELAY)
23.	224-2862	[1]	HARNESS AS-BOX
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	121-1022	[7]	DIODE
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	183-1000	[1]	PANEL AS-FUSE
24.	224-2863	[1]	BRACKET AS
25.	234-1193	[1]	WIRE AS
26.	234-1194	[1]	WIRE AS
27.	234-1195	[1]	WIRE AS
28.	234-1196	[1]	WIRE AS
29.	234-1197	[1]	WIRE AS
30.	234-1198	[1]	WIRE AS
31.	234-1199	[1]	WIRE AS
32.	238-2526	[1]	COVER
33.	095-0735 M	[16]	SCREW-MACHINE (M5X0.8X8-MM)
34.	096-4833 M	[2]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
35.	096-5962	[4]	WASHER-HARD (3.4X7X0.8-MM THK)
36.	096-6166	[8]	WASHER-HARD (4.5X9X1-MM THK)
37.	111-4874	[1]	COVER
38.	124-3548	[1]	FUSE (30-AMPERE)
39.	171-2210	[1]	CIRCUIT BREAKER AS (80-AMPERE)(MAIN)
	6V-8187	[2]	NUT (1/4-28-THD)
	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	253-2111	[2]	LOCKWASHER
40.	3E-8048 M	[4]	SCREW-MACHINE (M3X0.5X6-MM)
41.	6V-5645	[2]	SCREW-MACHINE (10-32X0.87-IN)
42.	7X-2619 M	[5]	BOLT (M6X1X10-MM)
43.	8C-7581 M	[8]	SCREW-MACHINE (M4X0.7X8-MM)
44.	8T-0328	[20]	WASHER-HARD (5.5X10X1-MM THK)
45.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
46.	8T-4171 M	[6]	BOLT (M6X1X12-MM)
47.	8T-4191 M	[4]	BOLT (M10X1.5X16-MM)
48.	8T-4970 M	[2]	BOLT (M6X1X14-MM)
49.	8T-6411 M	[13]	SCREW-MACHINE (M6X1X12-MM)
50.	9X-8256	[28]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

289-3972: PANEL GP-CONTROL

PANEL GP-CONTROL

289-3972 PANEL GP-CONTROL
S/N GWC1-UP
PART OF 318-9582, 318-9583, 318-9584 CONTROL GP-HYDRAULIC GENERATOR

Parts for your 365C L MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
2.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
3.	7K-1181	[6]	STRAP-CABLE
5.	8T-9655	[8]	MOUNT-ISOLATION
6.	9M-4494	[1]	NUT-SPANNER (3/4-14 NPT-THD)
7.	113-8492	[1]	FUSE (20-AMPERE)
8.	123-6574	[1]	BUSHING
9.	124-3548	[2]	FUSE (30-AMPERE)
10.	160-3580	[1]	HANDLE
11.	160-3581	[1]	SHAFT AS
	4H-1641	[1]	PIN-SPRING
12.	167-3593	[1]	STRAP
13.	173-5450	[1]	SPRING
14.	178-3339	[18]	SCREW (8-32X0.5-IN)
15.	178-7240 BJ	[1]	FILM-INSTRUCTION (HYDRAULIC MANIFOLD)
16.	305-5373	[1]	HARNESS AS-POWER
	5E-8011	[1]	WASHER-SPECIAL (3.8-MM THK)
	8N-1542	[1]	PIN-CONNECTOR (10-GA)
	8N-1543	[1]	SOCKET-CONNECTOR (10-GA)
	9M-4494	[1]	NUT-SPANNER (3/4-14 NPT-THD)
	123-6574	[1]	BUSHING
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(8-CM)
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	191-5222	[1]	CONNECTOR
22.	189-2512	[1]	PLATE
24.	283-4308	[2]	END-STOP
25.	288-3741	[1]	WIRE AS (10-GA, BLACK)
26.	288-3743	[1]	WIRE AS (10-GA, RED)
27.	288-3745	[1]	CABLE AS
	8C-3056 E		CABLE (2-GA, RED)(16-CM)
	311-6184	[1]	TERMINAL-RING (2-GA, 3/8-IN SCREW)
28.	288-3749	[1]	HARNESS AS-PANEL
	103-8133	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	7K-1181	[36]	STRAP-CABLE
	7N-8816	[6]	TERMINAL-FORK (16-GA TO 22-GA, NO. 4 SCREW)
	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
	8T-8729	[33]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[106]	PLUG-SEAL
	9W-0844	[9]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-1951	[1]	RECEPTACLE-CONNECTOR (9-PIN)
	9X-3402	[37]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(59-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)
	9X-3402	[15]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8075	[8]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8076	[8]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	2L-8077	[2]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	2L-8079	[4]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	5P-5618	[2]	TERMINAL-BLADE (10-GA TO 12-GA)
	5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	5P-2321	[8]	TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)
	133-0970	[2]	RECEPTACLE AS-CONNECTOR (TEE)
	147-1445	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	147-1446	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	172-6063	[1]	RECEPTACLE AS
	307-8428	[1]	GASKET
	196-2413	[6]	TERMINAL AS (12-GA)
	174-3016	[1]	PLUG AS-CONNECTOR (3-PIN)
29.	288-3753	[1]	BRACKET AS
30.	288-5507	[1]	PLATE AS
31.	289-3974	[1]	PANEL AS-CONTROL
32.	290-3399	[2]	FILM-DANGER (SHOCK, ELECTROCUTION HAZARD)
33.	291-8372	[1]	MONITOR
34.	302-8713	[1]	FILM-INSTRUCTION (GENERATOR ENCLOSURE, READ OMM)
35.	304-5304	[1]	TRANSDUCER (CURRENT)(0 TO 25-AMPERE)
36.	304-5312	[1]	TRANSDUCER (CURRENT)(0 TO 300-AMPERE)
37.	304-5687	[1]	CONTROL GP-UNPROGRAMMED
38.	350-0605	[1]	BOARD AS-CIRCUIT
	142-6258	[1]	RECEPTACLE AS
	6B-4540	[2]	NUT (4-40-THD)
	8C-5444	[1]	DIODE-RECTIFIER
	103-0703	[1]	DIODE-ZENER
40.	323-1152	[2]	RELAY (100-VOLT, 40-AMPERE)(DROP)
40A.	323-1152	[2]	RELAY (100-VOLT, 40-AMPERE)(LIFT)
50.	097-5921	[1]	RAIL-MOUNTING
51.		[4]	SPACER
52.	336-7723	[1]	BOX AS
53.	179-6401	[4]	SCREW-PAN HEAD (6-32X0.5-IN)
54.	095-0736 M	[2]	SCREW-MACHINE (M5X0.8X10-MM)
55.	095-0741 M	[2]	SCREW-MACHINE (M6X1-THD)
56.	132-3665	[6]	SPACER
57.	132-5789	[2]	CLIP (LADDER)
58.	160-3579	[1]	SWITCH (DISCONNECT)
59.	399-6035	[1]	RESISTOR
60.	160-3603	[1]	RELAY (BOOST)
61.	160-3604	[1]	RELAY (VOLTAGE, GENERATOR)
62.	160-3606	[1]	CONNECTOR AS
63.	173-5433	[1]	BASE
64.	173-5462	[1]	RESISTOR
65.	178-3341	[4]	SCREW (8-32X2-IN)
66.	180-7093	[1]	CONNECTOR
67.	222-6983	[2]	HEAT SINK
68.	263-6556 M	[1]	STUD (M10X1.5-THD)
69.	263-6557 M	[1]	STUD (M10X1.5-THD)
70.	3D-9799	[6]	SCREW-MACHINE (8-32X0.875-IN)
71.	3K-6881	[2]	SCREW-MACHINE (1/4-20X0.625-IN)
72.	4B-4863	[8]	WASHER (4.7X11X1.2-MM THK)
73.	5C-7261 M	[1]	NUT (M8X1.25-THD)
74.	5P-4116	[6]	WASHER-HARD (8.8X20.5X2-MM THK)
75.	6V-5210 M	[2]	SCREW-MACHINE (M4X0.7X10-MM)
76.	6V-8225 M	[4]	NUT (M6X1-THD)
78.	8C-8514	[8]	SCREW-MACHINE (8-32X0.375-IN)
79.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
80.	8T-4133 M	[2]	NUT (M10X1.5-THD)
81.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
82.	8T-4189 M	[4]	BOLT (M8X1.25X20-MM)
83.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
84.	8T-6912 M	[4]	BOLT (M8X1.25X50-MM)
85.	9N-0869	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
86.	9S-2011	[2]	SCREW-MACHINE (1/4-20X0.5-IN)
87.	9X-6165	[8]	WASHER (6.5X22X2.5-MM THK)
88.	9X-8917	[4]	SCREW-MACHINE (4-40X9.52-MM)
89.	5P-8937 B		COMPOUND-JOINT (THERMAL)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	J		FOR NACD USE ONLY
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

251-0542: PANEL GP-SWITCH

PANEL GP-SWITCH

251-0542 PANEL GP-SWITCH -ENGINE SPEED, START
S/N GWC1-UP
PART OF 278-0365, 278-0366 CONVERSION AR-MACHINE
Type 1
CANNOT BE USED WITH @@@@@228-8169@@@@@
AN ATTACHMENT

Parts for your 365C L MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	9G-7641 Y	[1]	SWITCH GP-START (ENGINE, KEY)
3.	106-0107 Y	[1]	SWITCH GP-ROTARY (THROTTLE POSITION)
4.	170-9324	[1]	LAMP AS-INDICATOR (24-VOLT, 3-WATT)
5.	185-9208	[1]	KNOB AS (THROTTLE POSITION)
6.	234-1156	[1]	COVER
7.	234-1158	[1]	COVER
8.	267-7976	[1]	PANEL
9.	251-0543	[1]	HARNESS AS-CONSOLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[3]	STRAP-CABLE
	7Y-3951	[2]	TERMINAL-BLADE (14-GA)
	7Y-3952	[1]	PLUG-CONNECTOR (2-PIN)
	7Y-3962	[1]	TERMINAL-BULLET (MALE)
	7Y-3963	[1]	TERMINAL-BULLET (FEMALE)
	8T-8737	[3]	PLUG-SEAL
	121-1168	[1]	CONNECTOR-RECEPTACLE
	121-1173	[14]	TERMINAL (MALE)
	9X-3402	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[7]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8075	[4]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	153-2540	[10]	TERMINAL (FEMALE)
	153-2541	[1]	PLUG-CONNECTOR (10-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	238-2366	[7]	TERMINAL (MALE)
10.	096-6166	[4]	WASHER-HARD (4.5X9X1-MM THK)
11.	119-5026	[4]	SCREW-PAN HEAD (10-16X0.63-IN)
12.	6V-9491 M	[4]	SCREW-MACHINE (M4X0.7X20-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

251-0542: PANEL GP-SWITCH

PANEL GP-SWITCH

251-0542 PANEL GP-SWITCH -ENGINE SPEED, START
S/N GWC1-UP
PART OF 278-0365, 278-0366 CONVERSION AR-MACHINE
Type 2
CANNOT BE USED WITH @@@@@228-8169@@@@@
AN ATTACHMENT

Parts for your 365C L MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	9G-7641 Y	[1]	SWITCH GP-START (ENGINE, KEY)
3.	319-4420 CY	[1]	SWITCH GP-ROTARY (THROTTLE POSITION)
4.	170-9324	[1]	LAMP AS-INDICATOR (24-VOLT, 3-WATT)
5.	185-9208	[1]	KNOB AS (THROTTLE POSITION)
6.	234-1156	[1]	COVER
7.	234-1158	[1]	COVER
8.	267-7976	[1]	PANEL
9.	328-0021 C	[1]	HARNESS AS-CONSOLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[3]	STRAP-CABLE
	7Y-3951	[2]	TERMINAL-BLADE (14-GA)
	7Y-3952	[1]	PLUG-CONNECTOR (2-PIN)
	7Y-3962	[1]	TERMINAL-BULLET (MALE)
	7Y-3963	[1]	TERMINAL-BULLET (FEMALE)
	8T-8737	[3]	PLUG-SEAL
	121-1168	[1]	CONNECTOR-RECEPTACLE
	121-1173	[14]	TERMINAL (MALE)
	9X-3402	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[7]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8075	[4]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	153-2540	[10]	TERMINAL (FEMALE)
	153-2541	[1]	PLUG-CONNECTOR (10-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	238-2366	[7]	TERMINAL (MALE)
10.	096-6166	[4]	WASHER-HARD (4.5X9X1-MM THK)
11.	119-5026	[4]	SCREW-PAN HEAD (10-16X0.63-IN)
12.	6V-9491 M	[4]	SCREW-MACHINE (M4X0.7X20-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

251-0542: PANEL GP-SWITCH

PANEL GP-SWITCH

251-0542 PANEL GP-SWITCH -ENGINE SPEED, START
S/N GWC1-UP
PART OF 278-0365, 278-0366 CONVERSION AR-MACHINE
Type 3
CANNOT BE USED WITH @@@@@228-8169@@@@@
AN ATTACHMENT

Parts for your 365C L MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[4]	STRAP-CABLE
2.	255-2751 CY	[1]	SWITCH GP-START (ENGINE, KEY)
3.	319-4420 Y	[1]	SWITCH GP-ROTARY (THROTTLE POSITION)
4.	170-9324	[1]	LAMP AS-INDICATOR (24-VOLT, 3-WATT)
5.	185-9208	[1]	KNOB AS (THROTTLE POSITION)
6.	234-1156	[1]	COVER
7.	234-1158	[1]	COVER
8.	267-7976	[1]	PANEL
9.	328-0021	[1]	HARNESS AS-CONSOLE
	3S-2093	[3]	STRAP-CABLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	7Y-3951	[2]	TERMINAL-BLADE (14-GA)
	7Y-3952	[1]	PLUG-CONNECTOR (2-PIN)
	7Y-3962	[1]	TERMINAL-BULLET (MALE)
	7Y-3964	[1]	TUBE (CONNECTOR TERMINAL)
	7Y-3963	[1]	TERMINAL-BULLET (FEMALE)
	7Y-3965	[1]	TUBE (RECEPTACLE TERMINAL)
	8T-8737	[3]	PLUG-SEAL
	121-1168	[1]	CONNECTOR-RECEPTACLE
	121-1173	[14]	TERMINAL (MALE)
	9X-3402	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8075	[4]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	153-2540	[10]	TERMINAL (FEMALE)
	153-2541	[1]	PLUG-CONNECTOR (10-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	238-2366	[7]	TERMINAL (MALE)
10.	096-6166	[4]	WASHER-HARD (4.5X9X1-MM THK)
11.	119-5026	[4]	SCREW-PAN HEAD (10-16X0.63-IN)
12.	6V-9491 M	[4]	SCREW-MACHINE (M4X0.7X20-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

251-0544: PANEL GP-SWITCH

PANEL GP-SWITCH

251-0544 PANEL GP-SWITCH -ENGINE SPEED, START
S/N GWC1-UP
PART OF 228-8169 INSTALLATION AR-SECURITY, 238-2189 INSTALLATION GP-SECURITY, 264-0236 WIRING GP-PANEL
Type 1
AN ATTACHMENT

Parts for your 365C L MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	9G-7641 Y	[1]	SWITCH GP-START (ENGINE, KEY)
3.	106-0107 Y	[1]	SWITCH GP-ROTARY (THROTTLE POSITION)
4.	185-9208	[1]	KNOB AS (THROTTLE POSITION)
5.	205-0826	[1]	FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)
6.	205-8257	[1]	COIL AS (EXCITER)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
7.	234-1156	[1]	COVER
8.	267-7977	[1]	PANEL
9.	251-0543	[1]	HARNESS AS-CONSOLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
10.	096-6166	[4]	WASHER-HARD (4.5X9X1-MM THK)
11.	119-5026	[4]	SCREW-PAN HEAD (10-16X0.63-IN)
12.	6V-9491 M	[4]	SCREW-MACHINE (M4X0.7X20-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

251-0544: PANEL GP-SWITCH

PANEL GP-SWITCH

251-0544 PANEL GP-SWITCH -ENGINE SPEED, START
S/N GWC1-UP
PART OF 228-8169 INSTALLATION AR-SECURITY, 264-0236 WIRING GP-PANEL
Type 2
AN ATTACHMENT

Parts for your 365C L MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	9G-7641 Y	[1]	SWITCH GP-START (ENGINE, KEY)
3.	319-4420 CY	[1]	SWITCH GP-ROTARY (THROTTLE POSITION)
4.	185-9208	[1]	KNOB AS
5.	205-0826	[1]	FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)
6.	206-5208	[1]	COIL AS (EXCITER)
7.	234-1156	[1]	COVER
8.	267-7977	[1]	PANEL
9.	328-0021 C	[1]	HARNESS AS-CONSOLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[3]	STRAP-CABLE
	7Y-3951	[2]	TERMINAL-BLADE (14-GA)
	7Y-3952	[1]	PLUG-CONNECTOR (2-PIN)
	7Y-3962	[1]	TERMINAL-BULLET (MALE)
	7Y-3963	[1]	TERMINAL-BULLET (FEMALE)
	8T-8737	[3]	PLUG-SEAL
	121-1168	[1]	CONNECTOR-RECEPTACLE
	121-1173	[14]	TERMINAL (MALE)
	9X-3402	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8075	[4]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	153-2540	[10]	TERMINAL (FEMALE)
	153-2541	[1]	PLUG-CONNECTOR (10-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	238-2366	[7]	TERMINAL (MALE)
10.	096-6166	[4]	WASHER-HARD (4.5X9X1-MM THK)
11.	119-5026	[4]	SCREW-PAN HEAD (10-16X0.63-IN)
12.	6V-9491 M	[4]	SCREW-MACHINE (M4X0.7X20-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

251-0544: PANEL GP-SWITCH

PANEL GP-SWITCH

251-0544 PANEL GP-SWITCH -ENGINE SPEED, START
S/N GWC1-UP
PART OF 228-8169 INSTALLATION AR-SECURITY, 264-0236 WIRING GP-PANEL
Type 3
AN ATTACHMENT

Parts for your 365C L MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	255-2751 CJY	[1]	SWITCH GP-START (ENGINE, KEY)
3.	319-4420 Y	[1]	SWITCH GP-ROTARY (THROTTLE POSITION)
4.	185-9208	[1]	KNOB AS
5.	205-0826	[1]	FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)
6.	206-5208	[1]	COIL AS (EXCITER)
7.	234-1156	[1]	COVER
8.	267-7977	[1]	PANEL
9.	328-0021	[1]	HARNESS AS-CONSOLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[3]	STRAP-CABLE
	7Y-3951	[2]	TERMINAL-BLADE (14-GA)
	7Y-3952	[1]	PLUG-CONNECTOR (2-PIN)
	7Y-3962	[1]	TERMINAL-BULLET (MALE)
	7Y-3964	[1]	TUBE (CONNECTOR TERMINAL)
	7Y-3963	[1]	TERMINAL-BULLET (FEMALE)
	7Y-3965	[1]	TUBE (RECEPTACLE TERMINAL)
	8T-8737	[3]	PLUG-SEAL
	121-1168	[1]	CONNECTOR-RECEPTACLE
	121-1173	[14]	TERMINAL (MALE)
	9X-3402	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8075	[4]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	153-2540	[10]	TERMINAL (FEMALE)
	153-2541	[1]	PLUG-CONNECTOR (10-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	238-2366	[7]	TERMINAL (MALE)
10.	096-6166	[4]	WASHER-HARD (4.5X9X1-MM THK)
11.	119-5026	[4]	SCREW-PAN HEAD (10-16X0.63-IN)
12.	6V-9491 M	[4]	SCREW-MACHINE (M4X0.7X20-MM)
	C		CHANGE FROM PREVIOUS TYPE
	J		REQUIRES CORPORATE KEY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

SENSOR GP

Special Instruction

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Specifications

Engine Oil Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Inlet Air Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines

Coolant Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Inlet Manifold Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines

Inlet Manifold Air Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines

Atmospheric Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Liquid Level Sensor (Water Separator)
365C Excavator, 365C Material Handler and 365C Front Shovel Machine System Specifications

Atmospheric Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Coolant Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines

Inlet Manifold Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines

Inlet Manifold Air Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Atmospheric Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines

Coolant Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines

Inlet Air Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines

Coolant Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines

Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines

Boost Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Atmospheric Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines

Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
C15 and C18 Engines for Caterpillar Built Machines

Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines

Boost Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Inlet Manifold Air Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines

Fuel Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines

Inlet Air Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines

Boost Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Inlet Manifold Air Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Inlet Manifold Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Speed/Timing Sensor
C15 and C18 Engines for Caterpillar Built Machines

Inlet Manifold Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines

Inlet Manifold Air Pressure Sensor
C15 and C18 Engines for Caterpillar Built Machines

Inlet Manifold Temperature Sensor
C15 and C18 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Sensors
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Reuse And Salvage Guidelines

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Testing and Adjusting

Angle Sensor - Calibrate - AS300 System
AccuGrade^® GPS (CD700)

Angle Sensor - Calibrate - PSC System
AccuGrade^® GPS (CD700)

Troubleshooting

MID 039 - CID 0110 - FMI 04
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0190 - FMI 08
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 08
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1129 - FMI 08
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 03
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1129 - FMI 03
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1129 - FMI 13
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 13
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0190 - FMI 10
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1129 - FMI 04
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 04
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Speed/Timing - Test
C15 and C18 Engines for Caterpillar Built Machines

Sensor Signal (Analog, Active) - Test
C15 and C18 Engines for Caterpillar Built Machines

Sensor Signal (Analog, Passive) - Test
C15 and C18 Engines for Caterpillar Built Machines

Timing - Calibrate
C15 and C18 Engines for Caterpillar Built Machines

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Sensor Supply - Test
C15 and C18 Engines for Caterpillar Built Machines

Disassembly and Assembly

Coolant Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines

Atmospheric Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines

Crankshaft Position Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines

Camshaft Position Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines

Inlet Air Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines

Fuel Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines

Turbocharger Outlet Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines

Service Magazine

Coolant Level Sensor Installation Service Notes {5574}
2008/07/14

Troubleshooting the "Water Separator Has Water" Warning Message {1263, 1439}
2008/03/31

Preventing Oil Leaks from the Pressure Sensors on the Main Hydraulic Pump {5057, 5070}
2007/04/02

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

A New Angle Sensor is Now Available for AccuGrade and CAES Systems on Excavators {1439, 5953}
2009/03/16

197-7415 MOUNTING GP-SENSOR -ATMOSPHERIC, ENGINE OIL S/N LHX3000-UP PART OF 221-0890, 283-2437 ENGINE AR-COMPLETE 365C L MH

ELECTRICAL AND STARTING SYSTEM

197-7415: MOUNTING GP-SENSOR

Parts for your 365C L MH EXCAVATOR:

332-6780: MOUNTING GP-SENSOR

Parts for your 365C L MH EXCAVATOR:

224-2861: PANEL GP-CIRCUIT BREAKER

Parts for your 365C L MH EXCAVATOR:

289-3972: PANEL GP-CONTROL

Parts for your 365C L MH EXCAVATOR:

251-0542: PANEL GP-SWITCH

Parts for your 365C L MH EXCAVATOR:

251-0542: PANEL GP-SWITCH

Parts for your 365C L MH EXCAVATOR:

251-0542: PANEL GP-SWITCH

Parts for your 365C L MH EXCAVATOR:

251-0544: PANEL GP-SWITCH

Parts for your 365C L MH EXCAVATOR:

251-0544: PANEL GP-SWITCH

Parts for your 365C L MH EXCAVATOR:

251-0544: PANEL GP-SWITCH

Parts for your 365C L MH EXCAVATOR:

Information:

Caterpillar Parts SIS Catalog 365C L MH :

Truck sale: