WORK TOOLS
RIPPER GPGROUND ENGAGING TOOLS (G.E.T.)
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSWORK TOOLS
RIPPER GP
#SEBP45200830
224-4449: RIPPER AR
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-1356 Y | [1] | GUARD GP-TRANSMISSION | |
| 2. | 224-4454 Y | [1] | MOUNTING GP-RIPPER | |
| 3. | 227-0842 Y | [1] | CYLINDER GP-RIPPER | |
| 4. | 235-8180 Y | [1] | LINES GP-RIPPER | |
| 5. | 235-8805 Y | [1] | RIPPER GP | |
| 7X-7644 F | [2] | FILM-IDENTIFICATION (TIE-DOWN) | ||
| (ON RH & LH SIDE OF TRACK ROLLER FRAME CENTERED BETWEEN FRONT ROLLER & REAR IDLER) | ||||
| 8M-3494 F | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| (ON CARRIAGE AS ON RH SIDE OF RH TOWER) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45200831
224-4449: RIPPER AR
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-1356 Y | [1] | GUARD GP-TRANSMISSION | |
| 2. | 224-4454 Y | [1] | MOUNTING GP-RIPPER | |
| 3. | 325-5723 CY | [1] | CYLINDER GP-RIPPER | |
| 4. | 235-8180 Y | [1] | LINES GP-RIPPER | |
| 5. | 235-8805 Y | [1] | RIPPER GP | |
| 7X-7644 F | [2] | FILM-IDENTIFICATION (TIE-DOWN) | ||
| (ON RH & LH SIDE OF TRACK ROLLER FRAME CENTERED BETWEEN FRONT ROLLER & REAR IDLER) | ||||
| 8M-3494 F | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| (ON CARRIAGE AS ON RH SIDE OF RH TOWER) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45200832
381-3953: RIPPER AR
381-3953 RIPPER AR -CURVED
S/N LAE1-UP; PEZ1-UP
3-TEETH PACKAGE
FOR USE WITH CONTROL AR-RIPPER
CANNOT BE USED WITH WINCH
AN ATTACHMENT
S/N LAE1-UP; PEZ1-UP
3-TEETH PACKAGE
FOR USE WITH CONTROL AR-RIPPER
CANNOT BE USED WITH WINCH
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP45200833
381-3955: RIPPER AR
381-3955 RIPPER AR -STRAIGHT
S/N LAE1-UP
3-TEETH PACKAGE
FOR USE WITH CONTROL AR-RIPPER
CANNOT BE USED WITH WINCH
AN ATTACHMENT
S/N LAE1-UP
3-TEETH PACKAGE
FOR USE WITH CONTROL AR-RIPPER
CANNOT BE USED WITH WINCH
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP45200834
235-8805: RIPPER GP
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2K-0703 | [1] | BAR | |
| 2. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 3K-8510 | [1] | PIN | |
| 4. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 5. | 9J-8926 Y | [1] | TOOTH GP-RIPPER | |
| 6. | 9J-9598 | [2] | PIN | |
| 7. | 290-0862 | [1] | CARRIAGE AS | |
| 8. | 9W-0873 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | ||
| 9. | 189-0985 | [1] | FRAME & BEARING AS | |
| 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | ||
| 9W-0099 | [4] | BUSHING | ||
| 10. | 1U-0159 | [2] | PIN | |
| 11. | 5C-6565 | [2] | BOLT (1/2-13X1.125-IN) | |
| 12. | 6V-7687 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 13. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 14. | 7X-2543 M | [2] | BOLT (M10X1.5X120-MM) | |
| 15. | 8T-4223 | [18] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4244 M | [8] | NUT (M12X1.75-THD) | |
| 17. | 8T-4648 M | [8] | BOLT (M12X1.75X70-MM) | |
| 18. | 8T-7929 M | [2] | BOLT (M12X1.75X180-MM) | |
| 19. | 9N-4449 B | [2] | SPACER (68X121X1.5-MM THK) | |
| 20. | 9N-4450 B | [4] | SPACER (68X120X5-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45200835
3A-7880: TOOTH GP-RIPPER
3A-7880 TOOTH GP-RIPPER -STRAIGHT
S/N LAE1-UP; PEZ1-UP
PART OF 381-3955 RIPPER AR
AN ATTACHMENT
S/N LAE1-UP; PEZ1-UP
PART OF 381-3955 RIPPER AR
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8J-2189 Y | [3] | TOOTH GP-RIPPER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45200836
8J-2189: TOOTH GP-RIPPER
8J-2189 TOOTH GP-RIPPER -STRAIGHT
S/N LAE1-UP; PEZ1-UP
PART OF 3A-7880 TOOTH GP-RIPPER
AN ATTACHMENT
S/N LAE1-UP; PEZ1-UP
PART OF 3A-7880 TOOTH GP-RIPPER
AN ATTACHMENT
For full view, you need register
#SEBP45200837
9J-8926: TOOTH GP-RIPPER
9J-8926 TOOTH GP-RIPPER -CURVED
S/N LAE1-UP; R1G1-UP; PEZ1-UP
PART OF 381-3953 RIPPER AR, 235-8805 RIPPER GP
AN ATTACHMENT
S/N LAE1-UP; R1G1-UP; PEZ1-UP
PART OF 381-3953 RIPPER AR, 235-8805 RIPPER GP
AN ATTACHMENT
For full view, you need register
#SEBP45200838
290-6096: FILM GP
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | FILM-IDENTIFICATION (D6T, LH) | ||
| 2. | [1] | FILM-IDENTIFICATION (D6T, RH) | ||
| 3. | 308-4558 | [1] | FILM-IDENTIFICATION (CAT, LH) | |
| 4. | 308-4559 | [1] | FILM-IDENTIFICATION (CAT, RH) | |
| 5. | [1] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| 6. | 292-4396 | [1] | FILM-IDENTIFICATION (CAT, REAR) | |
| 7. | 253-0861 | [2] | FILM-INFORMATION (CAT POWER, ACERT TECHNOLOGY) | |
#SEBP45200839
290-6097: FILM GP
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | FILM-IDENTIFICATION (D6T XL, LH) | ||
| 2. | 292-4401 | [1] | FILM-IDENTIFICATION (D6T XL, RH) | |
| 3. | 308-4558 | [1] | FILM-IDENTIFICATION (CAT, LH) | |
| 4. | 308-4559 | [1] | FILM-IDENTIFICATION (CAT, RH) | |
| 5. | [1] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| 6. | 292-4396 | [1] | FILM-IDENTIFICATION (CAT, REAR) | |
| 7. | 253-0861 | [2] | FILM-INFORMATION (CAT POWER, ACERT TECHNOLOGY) | |
