AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

282-6600 BULLDOZER AR-PWR ANGLE & TILT S/N B8A1-UP Type 1 AN ATTACHMENT D6T TRACK-TYPE TRACTOR


IMPLEMENTS
BULLDOZER GP
C-FRAME GP

TRACK-TYPE TRACTOR D6T TRACK-TYPE TRACTOR JWD
 D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering JWD00001-UP (MACHINE) POWERED BY C9 Engine SEBP4522 D6T JWD   (2007)

IMPLEMENTS

BULLDOZER GP
BULLDOZER AR-PWR ANGLE & TILT
282-6600 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
282-6600 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
282-6610 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
282-6610 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
282-6620 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
282-6620 BULLDOZER AR-PWR ANGLE & TILT
LINK GP-PITCH
225-3740 LINK GP-PITCH
LINK GP-PITCH
312-7767 LINK GP-PITCH
 

#SEBP45220600
 

282-6600: BULLDOZER AR-PWR ANGLE & TILT

282-6600 BULLDOZER AR-PWR ANGLE & TILT
S/N B8A1-UP
Type 1
AN ATTACHMENT
i02830892 SEBP4522
2826600 BULLDOZER AR-PWR ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-3740 Y [1] LINK GP-PITCH  
2. 227-4036 Y [1] CYLINDER & LINES GP-LIFT (RH)  
3. 227-4037 Y [1] CYLINDER & LINES GP-LIFT (LH)  
4. 227-8893 Y [1] CYLINDER GP-TILT  
5. 238-9559 Y [1] MOUNTING GP-CYLINDER  
6. 282-6591 Y [1] BLADE GP-ANGLING  
7. 282-6601 Y [1] C-FRAME GP  
8. 282-6621 Y [1] LINES GP-ANGLE & TILT  
9. 287-1973 Y [2] CYLINDER GP-ANGLING  
   
  8T-7371 F [1] PLATE-SERIAL NUMBER (BULLDOZER)  
    (ON UPPER RH CORNER OF BLADE)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP45220601
 

282-6600: BULLDOZER AR-PWR ANGLE & TILT

282-6600 BULLDOZER AR-PWR ANGLE & TILT
S/N B8A1-UP
Type 2
AN ATTACHMENT
i04932020 SEBP4522
2826600 BULLDOZER AR-PWR ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 312-7767 CY [1] LINK GP-PITCH  
2. 227-4036 Y [1] CYLINDER & LINES GP-LIFT (RH)  
3. 227-4037 Y [1] CYLINDER & LINES GP-LIFT (LH)  
4. 227-8893 Y [1] CYLINDER GP-TILT  
5. 238-9559 Y [1] MOUNTING GP-CYLINDER  
6. 282-6591 Y [1] BLADE GP-ANGLING  
7. 312-7759 CY [1] C-FRAME GP  
8. 364-2569 CY [1] LINES GP-ANGLE & TILT  
9. 287-1973 Y [2] CYLINDER GP-ANGLING  
   
  8T-7371 F [1] PLATE-SERIAL NUMBER (BULLDOZER)  
    (ON UPPER RH CORNER OF BLADE)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP45220602
 

282-6610: BULLDOZER AR-PWR ANGLE & TILT

282-6610 BULLDOZER AR-PWR ANGLE & TILT
S/N B8C1-UP
Type 1
AN ATTACHMENT
i02837550 SEBP4522
2826610 BULLDOZER AR-PWR ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-3740 Y [1] LINK GP-PITCH  
2. 227-4036 Y [1] CYLINDER & LINES GP-LIFT (RH)  
3. 227-4037 Y [1] CYLINDER & LINES GP-LIFT (LH)  
4. 227-8893 Y [1] CYLINDER GP-TILT  
5. 238-9559 Y [1] MOUNTING GP-CYLINDER  
6. 282-6594 Y [1] BLADE GP-ANGLING  
7. 282-6601 Y [1] C-FRAME GP  
8. 282-6621 Y [1] LINES GP-ANGLE & TILT  
9. 287-1973 Y [2] CYLINDER GP-ANGLING  
   
  8T-7371 F [1] PLATE-SERIAL NUMBER (BULLDOZER)  
    (ON UPPER RH CORNER OF BLADE)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP45220603
 

282-6610: BULLDOZER AR-PWR ANGLE & TILT

282-6610 BULLDOZER AR-PWR ANGLE & TILT
S/N B8C1-UP
Type 2
AN ATTACHMENT
i04930146 SEBP4522
2826610 BULLDOZER AR-PWR ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 312-7767 CY [1] LINK GP-PITCH  
2. 227-4036 Y [1] CYLINDER & LINES GP-LIFT (RH)  
3. 227-4037 Y [1] CYLINDER & LINES GP-LIFT (LH)  
4. 227-8893 Y [1] CYLINDER GP-TILT  
5. 238-9559 Y [1] MOUNTING GP-CYLINDER  
6. 282-6594 Y [1] BLADE GP-ANGLING  
7. 312-7759 CY [1] C-FRAME GP  
8. 364-2569 CY [1] LINES GP-ANGLE & TILT  
9. 287-1973 Y [2] CYLINDER GP-ANGLING  
   
  8T-7371 F [1] PLATE-SERIAL NUMBER  
    (ON UPPER RH CORNER OF BLADE)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP45220604
 

282-6620: BULLDOZER AR-PWR ANGLE & TILT

282-6620 BULLDOZER AR-PWR ANGLE & TILT
S/N B8E1-UP
Type 1
AN ATTACHMENT
i02837861 SEBP4522
2826620 BULLDOZER AR-PWR ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-3740 Y [1] LINK GP-PITCH  
2. 227-8893 Y [1] CYLINDER GP-TILT  
3. 233-1518 Y [1] CYLINDER & LINES GP-LIFT (RH)  
4. 233-1519 Y [1] CYLINDER & LINES GP-LIFT (LH)  
5. 238-9559 Y [1] MOUNTING GP-CYLINDER  
6. 282-6607 Y [1] BLADE GP-ANGLING  
7. 282-6614 Y [1] C-FRAME GP  
8. 282-6622 Y [1] LINES GP-ANGLE & TILT  
9. 287-1973 Y [2] CYLINDER GP-ANGLING  
   
  8T-7371 F [1] PLATE-SERIAL NUMBER (BULLDOZER)  
    (ON UPPER RH CORNER OF BLADE)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP45220605
 

282-6620: BULLDOZER AR-PWR ANGLE & TILT

282-6620 BULLDOZER AR-PWR ANGLE & TILT
S/N B8E1-UP
Type 2
AN ATTACHMENT
i04932036 SEBP4522
2826620 BULLDOZER AR-PWR ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 312-7767 CY [1] LINK GP-PITCH  
2. 227-8893 Y [1] CYLINDER GP-TILT  
3. 233-1518 Y [1] CYLINDER & LINES GP-LIFT (RH)  
4. 233-1519 Y [1] CYLINDER & LINES GP-LIFT (LH)  
5. 238-9559 Y [1] MOUNTING GP-CYLINDER  
6. 282-6607 Y [1] BLADE GP-ANGLING  
7. 311-7877 CY [1] C-FRAME GP  
8. 364-2570 CY [1] LINES GP-ANGLE & TILT  
9. 287-1973 Y [2] CYLINDER GP-ANGLING  
   
  8T-7371 F [1] PLATE-SERIAL NUMBER (BULLDOZER)  
    (ON UPPER RH CORNER OF BLADE)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP45220606
 

282-6601: C-FRAME GP

282-6601 C-FRAME GP
S/N B8A1-UP; B8C1-UP
PART OF 282-6600, 282-6610 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i02830897 SEBP4522
2826601 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 223-3279 [1] RETAINER  
2. 193-3063 [2] CAP AS-BEARING  
3. 195-6283 M [4] NUT-SQUARE (M30X3.5-THD)  
4. 104-4817 [1] PIN  
5. 226-7190 [2] PIN  
6. 226-7191 [2] RETAINER  
7. 229-1516 [2] SPACER (64X72X18-MM THK)  
8. 229-1517 [4] SPACER (50.8X57.15X18-MM THK)  
9. 282-6598 [4] SPACER (50.8X57.15X4.73-MM THK)  
10. 282-6602 [1] C-FRAME AS  
  9J-4782 [2] PROTECTOR  
  274-1715 [2] STEP AS  
  233-3642 [1] TRUNNION AS  
  9M-1328 [2] BEARING-SELF-ALIGNING  
  1K-6985 [4] RING-RETAINING  
11. 282-6604 [2] PIN  
12. 3E-9850 M [4] BOLT (M30X3.5X220-MM)  
13. 7X-0515 [2] WASHER-HARD (17X35X5-MM THK)  
14. 7X-2543 M [4] BOLT (M10X1.5X120-MM)  
15. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4123 [1] WASHER (3.62X5.75X0.375-MM THK)  
17. 8T-6430 M [1] BOLT (M20X2.5X50-MM)  
18. 8T-7338 M [2] BOLT (M16X2X45-MM)  
19. 9X-8258 [4] WASHER (33X56X6-MM THK)  
20. 9W-7602 B [52] SHIM (0.8-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP45220607
 

282-6614: C-FRAME GP

282-6614 C-FRAME GP
S/N B8E1-UP
PART OF 282-6620 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i02837870 SEBP4522
2826614 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-7602 B [52] SHIM (0.8-MM THK)  
2. 104-4817 [1] PIN  
3. 193-3063 [2] CAP AS-BEARING  
4. 195-6283 M [4] NUT-SQUARE (M30X3.5-THD)  
5. 223-3279 [1] RETAINER  
6. 226-7190 [2] PIN  
7. 226-7191 [2] RETAINER  
8. 229-1516 [2] SPACER (64X72X18-MM THK)  
9. 229-1517 [4] SPACER (50.8X57.15X18-MM THK)  
10. 282-6598 [4] SPACER (50.8X57.15X4.73-MM THK)  
11. 282-6604 [2] PIN  
12. 282-6615 [1] C-FRAME AS  
12A. 1K-6985 [4] RING-RETAINING  
12B. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
12C. 9J-4782 [2] PROTECTOR  
12D. 274-1715 [2] STEP AS  
12E. 9M-1328 [2] BEARING-SELF-ALIGNING  
12F. 233-3642 [1] TRUNNION AS  
12G. 282-6605 [2] BEARING  
13. 3E-9850 M [4] BOLT (M30X3.5X220-MM)  
14. 7X-0515 [2] WASHER-HARD (17X35X5-MM THK)  
15. 7X-2543 M [4] BOLT (M10X1.5X120-MM)  
16. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4123 [1] WASHER (3.62X5.75X0.375-MM THK)  
18. 8T-6430 M [1] BOLT (M20X2.5X50-MM)  
19. 8T-7338 M [2] BOLT (M16X2X45-MM)  
20. 9X-8258 [4] WASHER (33X56X6-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP45220608
 

311-7877: C-FRAME GP

311-7877 C-FRAME GP
S/N B8E1-UP
PART OF 282-6620 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i04523465 SEBP4522
3117877 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 9J-4782 [2] PROTECTOR  
3. 9W-7602 B [52] SHIM (0.8-MM THK)  
4. 104-4817 [1] PIN  
5. 193-3063 [2] CAP AS-BEARING  
6. 195-6283 M [4] NUT-SQUARE (M30X3.5-THD)  
7. 223-3279 [1] RETAINER  
8. 226-7190 [2] PIN  
9. 226-7191 [2] RETAINER  
10. 229-1516 [2] SPACER (64X72X18-MM THK)  
11. 229-1517 [4] SPACER (50.8X57.15X18-MM THK)  
12. 245-1168 [1] PIN  
13. 282-6598 [4] SPACER (50.8X57.15X4.73-MM THK)  
14. 282-6604 [2] PIN  
15. 292-6035 [1] PLATE-RETAINER  
16. 311-7878 [1] C-FRAME AS  
16A. 1K-6985 [4] RING-RETAINING  
16B. 9M-1328 [2] BEARING-SELF-ALIGNING  
16C. 274-1715 [2] STEP AS  
16D. 233-3642 [1] TRUNNION AS  
16E. 282-6605 [2] BEARING  
17. 313-9790 [2] SPACER (50.8X57.15X35-MM THK)  
18. 178-2992 M [4] BOLT (M30X3.5X220-MM)  
19. 8T-4123 [3] WASHER (3.62X5.75X0.375-MM THK)  
20. 7X-2543 M [4] BOLT (M10X1.5X120-MM)  
21. 8T-6430 M [3] BOLT (M20X2.5X50-MM)  
22. 9X-2327 [4] WASHER (11X18.5X2.5-MM THK)  
23. 9X-8258 [4] WASHER (33X56X6-MM THK)  
24. 8T-7338 M [1] BOLT (M16X2X45-MM)  
25. 7X-0515 [1] WASHER-HARD (17X35X5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP45220609
 

312-7759: C-FRAME GP

312-7759 C-FRAME GP
S/N B8A1-UP; B8C1-UP
PART OF 282-6600, 282-6610 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i04523455 SEBP4522
3127759 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-4782 [2] PROTECTOR  
2. 9X-2327 [4] WASHER (11X18.5X2.5-MM THK)  
3. 104-4817 [1] PIN  
4. 193-3063 [2] CAP AS-BEARING  
5. 195-6283 M [4] NUT-SQUARE (M30X3.5-THD)  
6. 223-3279 [1] RETAINER  
7. 226-7190 [2] PIN  
8. 226-7191 [2] RETAINER  
9. 229-1516 [2] SPACER (64X72X18-MM THK)  
10. 229-1517 [4] SPACER (50.8X57.15X18-MM THK)  
11. 245-1168 [1] PIN  
12. 282-6598 [4] SPACER (50.8X57.15X4.73-MM THK)  
13. 282-6604 [2] PIN  
14. 292-6035 [1] PLATE-RETAINER  
15. 312-7760 [1] C-FRAME AS  
15A. 1K-6985 [4] RING-RETAINING  
15B. 9M-1328 [2] BEARING-SELF-ALIGNING  
15C. 274-1715 [2] STEP AS  
15D. 233-3642 [1] TRUNNION AS  
15E. 282-6605 [2] BEARING  
16. 313-9790 [2] SPACER (50.8X57.15X35-MM THK)  
17. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
18. 3E-9850 M [4] BOLT (M30X3.5X220-MM)  
19. 7X-0515 [3] WASHER-HARD (17X35X5-MM THK)  
20. 7X-2543 M [4] BOLT (M10X1.5X120-MM)  
21. 8T-4123 [1] WASHER (3.62X5.75X0.375-MM THK)  
22. 8T-6430 M [1] BOLT (M20X2.5X50-MM)  
23. 8T-7338 M [3] BOLT (M16X2X45-MM)  
24. 9X-8258 [4] WASHER (33X56X6-MM THK)  
25. 9W-7602 [52] SHIM (0.8-MM THK)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D6T :

VALVE GP-SOLENOID
341-9214 VALVE GP-SOLENOID
VALVE GP-SOLENOID
313-7668 VALVE GP-SOLENOID
VALVE GP-SOLENOID
285-5730 VALVE GP-SOLENOID
VALVE GP-SOLENOID
235-4605 VALVE GP-SOLENOID
VALVE GP-SOLENOID
201-0950 VALVE GP-SOLENOID
VALVE GP-SHUTTLE
4T-1860 VALVE GP-SHUTTLE
VALVE GP-RELIEF
9T-3533 VALVE GP-RELIEF
VALVE GP-RELIEF
9T-3533 VALVE GP-RELIEF
BULLDOZER AR-PWR ANGLE & TILT
282-6600 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
282-6610 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
282-6610 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
282-6620 BULLDOZER AR-PWR ANGLE & TILT
BULLDOZER AR-PWR ANGLE & TILT
282-6620 BULLDOZER AR-PWR ANGLE & TILT
C-FRAME GP
282-6601 C-FRAME GP
C-FRAME GP
282-6614 C-FRAME GP
C-FRAME GP
311-7877 C-FRAME GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.