AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

110-5230 BLADE GP-ANGLING S/N G6N1-UP PART OF 223-6303 BULLDOZER AR-PWR ANGLE & TILT AN ATTACHMENT D6N


WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)

TRACK-TYPE TRACTOR D6N TRACK-TYPE TRACTOR JAH
 D6N TRACK-TYPE TRACTOR XL JAH00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP4523 D6N JAH   (2007)

WORK TOOLS

BLADE GP
BLADE AS-ANGLING
296-5099 BLADE AS-ANGLING
BLADE GP
288-9890 BLADE GP
BLADE GP-ANGLING
110-5230 BLADE GP-ANGLING
BLADE GP-ANGLING
257-0201 BLADE GP-ANGLING
BLADE GP-ANGLING
257-0210 BLADE GP-ANGLING
BLADE GP-ANGLING
257-0210 BLADE GP-ANGLING
 

#SEBP45230510
 

110-5230: BLADE GP-ANGLING

110-5230 BLADE GP-ANGLING
S/N G6N1-UP
PART OF 223-6303 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i02675940 SEBP4523
1105230 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 3G-8932 [2] PIN  
3. 4T-0231 [2] RETAINER  
4. 8E-9380 Y [1] EDGE GP-BIT & CUTTING  
5. 8G-5747 [4] SPACER (45X50X15-MM THK)  
6. 104-4817 [2] PIN  
7. 104-7434 [2] RETAINER  
8. 197-6440 [1] BEARING  
9. 266-9599 C [1] RETAINER  
10. 295-8752 C [1] BLADE AS-ANGLING  
10A. 295-8751 [1] BRACKET AS  
10B. 110-5228 [1] BRACKET AS (TILT CYLINDER)  
10C. 8E-9502 [1] SUPPORT  
11. 089-8249 [4] SPACER (64X72X13-MM THK)  
12. 9X-8271 CM [8] BOLT-12 POINT HEAD (M10X1.5X45-MM)  
13. 7X-2562 M [4] BOLT (M20X2.5X45-MM)  
14. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45230511
 

257-0201: BLADE GP-ANGLING

257-0201 BLADE GP-ANGLING -LASER APPLICATION
S/N B7E1-UP
FOLDABLE
PART OF 257-0210 BLADE GP-ANGLING
AN ATTACHMENT
i03626232 SEBP4523
2570201 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-3791 [4] PIN  
2. 8V-7659 [2] PIN AS  
3. 257-0203 [1] BLADE AS (LH)  
4. 257-0204 [1] SUPPORT-ARM  
5. 257-0205 [2] PIN-DOWEL  
6. 296-9833 [1] BLADE AS (RH)  
7. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
8. 7G-8839 [2] SPACER (13.5X57X6-MM THK)  
9. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
  M   METRIC PART
 

#SEBP45230512
 

257-0210: BLADE GP-ANGLING

257-0210 BLADE GP-ANGLING
S/N B7E1-UP
FOLDABLE
PART OF 262-9873 BULLDOZER AR-PWR ANGLE & TILT
Type 1
FOR USE WITH GRADE CONTROL AR, XL
AN ATTACHMENT
i03626215 SEBP4523
2570210 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 3G-8932 [2] PIN  
3. 4T-0231 [2] RETAINER  
4. 8G-5747 [4] SPACER (45X50X15-MM THK)  
5. 089-8249 [4] SPACER (64X72X13-MM THK)  
6. 104-4817 [2] PIN  
7. 104-7434 [2] RETAINER  
8. 197-6440 [1] BEARING  
9. 257-0201 Y [1] BLADE GP-ANGLING  
10. 257-0207 Y [1] EDGE GP-BIT & CUTTING (ANGLING)  
11. 266-9599 [1] RETAINER  
12. 9X-8271 M [8] BOLT-12 POINT HEAD (M10X1.5X45-MM)  
13. 7X-2562 M [4] BOLT (M20X2.5X45-MM)  
14. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
16. 2Y-9790 [1] PLATE-SERIAL NUMBER (BLADE)  
16A. 4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45230513
 

257-0210: BLADE GP-ANGLING

257-0210 BLADE GP-ANGLING
S/N B7E1-UP
FOLDABLE
PART OF 262-9873 BULLDOZER AR-PWR ANGLE & TILT
Type 2
FOR USE WITH GRADE CONTROL AR, XL
AN ATTACHMENT
i04659009 SEBP4523
2570210 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 C [1] FITTING-GREASE (1/8-27 PTF)  
2. 3G-8932 [2] PIN  
3. 4T-0231 [2] RETAINER  
4. 8G-5747 [4] SPACER (45X50X15-MM THK)  
5. 089-8249 [4] SPACER (64X72X13-MM THK)  
6. 104-4817 [2] PIN  
7. 104-7434 [2] RETAINER  
8. 197-6440 [1] BEARING  
9. 257-0201 Y [1] BLADE GP-ANGLING  
10. 257-0207 Y [1] EDGE GP-BIT & CUTTING (ANGLING)  
11. 376-6434 C [1] RETAINER  
12. 9X-8271 CM [10] BOLT-12 POINT HEAD (M10X1.5X45-MM)  
13. 7X-2562 M [4] BOLT (M20X2.5X45-MM)  
14. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
16. 2Y-9790 [1] PLATE-SERIAL NUMBER (BLADE)  
16A. 4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45230514
 

303-9230: BLADE GP-ANGLING

303-9230 BLADE GP-ANGLING -LANDFILL
S/N JAH1-UP
PART OF 288-9890 BLADE GP
AN ATTACHMENT
i02797011 SEBP4523
3039230 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 3G-8932 [2] PIN  
3. 4T-0231 [2] RETAINER  
4. 8E-9380 Y [1] EDGE GP-BIT & CUTTING  
5. 8G-5747 [4] SPACER (45X50X15-MM THK)  
6. 104-4817 [2] PIN  
7. 104-7434 [2] RETAINER  
8. 197-6440 [1] BEARING  
9. 266-9599 [1] RETAINER  
10. 303-9231 [1] BLADE AS-ANGLING  
11. 089-8249 [4] SPACER (64X72X13-MM THK)  
12. 9X-8271 M [8] BOLT-12 POINT HEAD (M10X1.5X45-MM)  
13. 7X-2562 M [4] BOLT (M20X2.5X45-MM)  
14. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
   
  2Y-9790 F [1] PLATE-SERIAL NUMBER (BLADE)  
    (ON THE LEFT TOP CORNER OF STRAIGHT VPAT BLADE)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45230515
 

257-0207: EDGE GP-BIT & CUTTING

257-0207 EDGE GP-BIT & CUTTING
S/N B7E1-UP
PART OF 257-0210 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
i03626238 SEBP4523
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8E-9379 [1] BIT-END (RH)  
  5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
  3G-4282 [1] EDGE-CUTTING  
  257-0264 [1] EDGE-CUTTING  
  257-0265 [1] EDGE-CUTTING  
  2J-3506 [22] NUT-FULL (3/4-10-THD)  
  5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP45230516
 

3G-4210: EDGE GP-BIT & CUTTING

3G-4210 EDGE GP-BIT & CUTTING -LEVEL CUT
S/N JAH1-UP
19-MM (0.7-IN) THICK. REVERSIBLE
FIELD INSTALLATION
i07279099 SEBP4523
3G4210 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4282 [2] EDGE-CUTTING  
2. 3G-4285 [2] BIT-END  
3. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
4. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
5. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP45230517
 

507-2847: EDGE GP-BIT & CUTTING

507-2847 EDGE GP-BIT & CUTTING -GENERAL DUTY
S/N JAH1-UP
FIELD INSTALLATION
i06939275 SEBP4523
5072847 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4282 [2] EDGE-CUTTING  
2. 140-6787 [1] BIT-END (RH)  
3. 140-6788 [1] BIT-END (LH)  
4. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP45230518
 

507-2848: EDGE GP-BIT & CUTTING

507-2848 EDGE GP-BIT & CUTTING -LEVEL CUT
S/N JAH1-UP
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
i06939364 SEBP4523
5072848 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6659 [1] EDGE-CUTTING  
2. 9U-8057 [2] EDGE-CUTTING  
3. 323-4279 [1] BIT-END (RH)  
4. 323-4280 [1] BIT-END (LH)  
5. 2J-3506 [23] NUT-FULL (3/4-10-THD)  
6. 5J-4773 [23] BOLT-PLOW (3/4-10X2.5-IN)  
7. 5P-8248 [23] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP45230519
 

507-2849: EDGE GP-BIT & CUTTING

507-2849 EDGE GP-BIT & CUTTING -LEVEL CUT REVERSIBLE
S/N JAH1-UP
SEMI-UNIVERSAL
FOR USE WITH ANGLE BLADE
FIELD INSTALLATION
i06939351 SEBP4523
5072849 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4285 [2] BIT-END  
2. 4T-6659 [1] EDGE-CUTTING  
3. 9U-8057 [2] EDGE-CUTTING  
4. 2J-3506 [23] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [23] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [23] WASHER-HARD (20X36.5X3.5-MM THK)  
 

Information:

Caterpillar Parts SIS Catalog D6N :

BLADE GP
288-9890 BLADE GP
BLADE AS-ANGLING
296-5099 BLADE AS-ANGLING
BLADE & EDGE GP-SEMI-UNIVERSAL
115-4594 BLADE & EDGE GP-SEMI-UNIVERSAL
BLADE & EDGE GP-ANGLING
235-5000 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
235-5000 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
235-5000 BLADE & EDGE GP-ANGLING
BAR-WEAR
107-3391 BAR-WEAR
WIPER GP-WINDOW
170-2086 WIPER GP-WINDOW
BLADE GP-ANGLING
257-0201 BLADE GP-ANGLING
BLADE GP-ANGLING
257-0210 BLADE GP-ANGLING
BLADE GP-ANGLING
257-0210 BLADE GP-ANGLING
BLADE GP-ANGLING
303-9230 BLADE GP-ANGLING
257-0207 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
3G-4210 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2847 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2848 EDGE GP-BIT & CUTTING

Truck sale:

 
 
Caterpillar D6N
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6NL AZ2, Crawler dozers, Construction
152,512 
Caterpillar D6NL AZ2, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D6N, Crawler dozers, Construction
139,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
ZIEGLER CAT
 
110,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6N, Crawler dozers, Construction
 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.