AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

308-5704 FILTER GP-FUEL C1.1 INDUSTRIAL ENGINE


FUEL SYSTEM
FILTER GP-FUEL
GOVERNOR GP
LINES GP-FUEL INJECTION
FILTER GP-FUEL
PUMP GP-FUEL INJECTION

INDUSTRIAL ENGINE C1.1 INDUSTRIAL ENGINE C6L
 C1.1 Industrial Engine C6L00001-UP SEBP4546 C1.1 C6L   (2007)

FUEL SYSTEM

FILTER GP-FUEL
FILTER GP-FUEL
308-5704 FILTER GP-FUEL
PUMP GP-FILTER & FUEL TRANSFER
334-0280 PUMP GP-FILTER & FUEL TRANSFER
PUMP GP-FILTER & FUEL TRANSFER
334-0280 PUMP GP-FILTER & FUEL TRANSFER
PUMP GP-FUEL PRM & PRIM FILTER
317-6706 PUMP GP-FUEL PRM & PRIM FILTER
 

#SEBP45460170
 

308-5704: FILTER GP-FUEL

308-5704 FILTER GP-FUEL
i02698384 SEBP4546
3085704 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your C1.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 276-1804 [1] FILTER GP-FUEL  
1A. 276-1806 [1] FILTER ELEMENT-FUEL (FILTER)  
1B. 302-7776 [1] BOWL-FUEL FILTER  
1C. 302-7777 [3] PLUG-DRAIN (FUEL FILTER)  
1D. 302-7778 [1] SEAL  
 

#SEBP45460171
 

313-6214: GOVERNOR GP

313-6214 GOVERNOR GP
PART OF 435-1648 CYLINDER BLOCK GP-LONG
i02773270 SEBP4546
3136214 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your C1.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 139-5511 [1] CAP (TAMPER RESISTANT)(MAX FUEL)  
3. 153-5592 M [1] NUT (M8X1.25-THD)  
4. 153-6415 [2] WASHER  
5. 153-7983 [1] PIN  
6. 095-1574 [1] SEAL-O-RING  
7. 369-4486 M [2] BOLT (M6X1X35-MM)  
8. 162-2207 [1] NUT (SPECIAL)  
9. 106-8916 M [4] BOLT (M6X16-MM)  
10. 335-5578 [1] BRACKET  
11. 423-7724 [1] GASKET  
12. 334-0732 [1] ARM (FRONT HOUSING)  
13. 308-1882 [1] SPRING  
14. 308-1889 M [1] NUT (M10X1.25-THD)  
15. 308-1892 M [1] NUT (M6X1-THD)  
16. 311-0655 [1] SPRING (START)  
17. 308-4266 [1] SHAFT  
18. 390-3731 [1] SHAFT  
19. 309-6729 [1] SEAL-O-RING  
20. 311-9622 [1] SPRING  
21. 313-2025 [1] BOLT-SPECIAL  
22. 324-3398 [1] LEVER-CONTROL  
23. 390-3729 [1] LEVER-CONTROL  
24. 336-2965 [1] SPRING  
25. 330-9189 [1] PLUG  
26. 153-7978 [1] SEAL  
27. 5D-1319 [1] PIN-SPRING  
28. 308-1897 [1] RING  
29. 309-6732 [1] BOLT  
30. 313-5832 [1] BOLT AS  
  153-7987 [1] WASHER  
  191-9297 M [1] NUT (M10X1.25-THD)  
  313-5833 [1] SPRING  
31. 321-4249 [1] NUT  
32. 359-5135 [1] HOUSING-FRONT  
33. 425-7065 [1] CAP-TAMPER PROOF  
  M   METRIC PART
 

#SEBP45460172
 

321-3142: GOVERNOR GP

321-3142 GOVERNOR GP
PART OF 435-1632, 435-1651 ENGINE AR
i02962183 SEBP4546
3213142 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your C1.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 139-5511 [1] CAP (TAMPER RESISTANT)  
3. 153-5592 M [1] NUT (M8X1.25-THD)  
4. 153-6415 [2] WASHER  
5. 153-7983 [1] PIN  
6. 095-1574 [1] SEAL-O-RING  
7. 369-4486 M [2] BOLT (M6X1X35-MM)  
8. 162-2207 [1] NUT  
9. 106-8916 M [4] BOLT (M6X16-MM)  
10. 217-7115 [1] CAP (TAMPER RESISTANT)  
11. 335-5578 [1] BRACKET  
12. 423-7724 [1] GASKET  
13. 334-0732 [1] ARM (FRONT HOUSING)  
14. 308-1882 [1] SPRING  
15. 308-1889 M [1] NUT (M10X1.25-THD)  
16. 308-1892 M [1] NUT (M6X1-THD)  
17. 308-1897 [2] RING  
18. 425-7065 [1] CAP-TAMPER PROOF  
19. 321-4249 [1] NUT  
20. 330-9189 [1] PLUG  
21. 308-4266 [1] SHAFT  
22. 390-3731 [1] SHAFT  
23. 154-2715 [1] WASHER  
24. 495-0737 [1] BOLT  
25. 311-0655 [1] SPRING  
26. 313-2025 [1] BOLT-SPECIAL  
27. 324-3396 [1] LEVER-CONTROL  
28. 313-5832 [1] BOLT AS  
28A. 153-7987 [1] WASHER  
28B. 191-9297 M [1] NUT (M10X1.25-THD)  
28C. 313-5833 [1] SPRING  
29. 390-3729 [1] LEVER-CONTROL  
30. 321-3145 [1] SPRING  
32. 336-2965 [1] SPRING  
  M   METRIC PART
 

#SEBP45460173
 

323-2408: GOVERNOR GP

323-2408 GOVERNOR GP
PART OF 435-1644 CYLINDER BLOCK GP
i02927301 SEBP4546
3232408 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your C1.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 139-5511 [1] CAP (TAMPER RESISTANT)  
3. 153-5592 M [1] NUT (M8X1.25-THD)  
4. 153-6415 [2] WASHER  
5. 153-7983 [1] PIN  
6. 095-1574 [1] SEAL-O-RING  
7. 369-4486 M [2] BOLT (M6X1X35-MM)  
8. 162-2207 [1] NUT  
9. 106-8916 M [4] BOLT (M6X16-MM)  
10. 217-7115 [1] CAP (TAMPER RESISTANT)  
11. 335-5578 [1] BRACKET  
12. 423-7724 [1] GASKET  
13. 334-0732 [1] ARM (FRONT HOUSING)  
14. 308-1882 [1] SPRING  
15. 308-1889 M [1] NUT (M10X1.25-THD)  
16. 308-1892 M [1] NUT (M6X1-THD)  
17. 308-1897 [2] RING  
18. 425-7065 [1] CAP-TAMPER PROOF  
19. 321-4249 [1] NUT  
20. 330-9189 [1] PLUG  
21. 308-4266 [1] SHAFT  
22. 390-3731 [1] SHAFT  
23. 309-6729 [1] SEAL-O-RING  
24. 495-0737 [1] BOLT  
25. 311-0655 [1] SPRING  
26. 313-2025 [1] BOLT-SPECIAL  
27. 324-3398 [1] LEVER-CONTROL  
28. 313-5832 [1] BOLT AS  
28A. 153-7987 [1] WASHER  
28B. 191-9297 M [1] NUT (M10X1.25-THD)  
28C. 313-5833 [1] SPRING  
29. 390-3729 [1] LEVER-CONTROL  
30. 364-1817 [1] SPRING  
31. 336-2965 [1] SPRING  
  M   METRIC PART
 

#SEBP45460174
 

454-5352: GOVERNOR GP

454-5352 GOVERNOR GP
PART OF 431-9932 ENGINE AR-PRIMARY
i07225889 SEBP4546
4545352 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your C1.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-8916 M [4] BOLT (M6X16-MM)  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 139-5511 [1] CAP (TAMPER RESISTANT)  
4. 153-5592 M [1] NUT (M8X1.25-THD)  
5. 153-6415 [2] WASHER  
6. 153-7983 [1] PIN  
7. 162-2207 [1] NUT  
8. 217-7115 [1] CAP (TAMPER RESISTANT)  
9. 289-7507 [1] SEAL-O-RING  
10. 308-1882 [1] SPRING  
11. 308-1889 M [1] NUT (M10X1.25-THD)  
12. 308-1892 M [1] NUT (M6X1-THD)  
13. 308-1897 C [1] RING  
14. 308-4266 [1] SHAFT  
15. 309-6729 [1] SEAL-O-RING  
16. 495-0737 [1] BOLT  
17. 311-0655 [1] SPRING  
18. 311-9622 [1] SPRING  
19. 313-2025 [1] BOLT-SPECIAL  
20. 313-5832 [1] BOLT AS  
20A. 153-7987 [1] WASHER  
20B. 191-9297 M [1] NUT (M10X1.25-THD)  
20C. 313-5833 [1] SPRING  
21. 502-5421 C [1] PIN  
22. 324-3398 [1] LEVER-CONTROL  
23. 330-9189 [1] PLUG  
24. 334-0732 [1] ARM (FRONT HOUSING)  
25. 335-5578 [1] BRACKET  
26. 369-4486 M [2] BOLT (M6X1X35-MM)  
27. 390-3729 [1] LEVER-CONTROL  
28. 390-3731 [1] SHAFT  
29. 423-7724 [1] GASKET  
30. 502-9478 C [1] NUT  
31. 503-9707 C [1] CAP  
32. 503-9731 C [1] SHROUD  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP45460175
 

366-1272: INJECTOR GP-FUEL

366-1272 INJECTOR GP-FUEL
PART OF 323-2410 PUMP GP-FUEL INJECTION
i04892709 SEBP4546
3661272 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your C1.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 232-0792 [1] NUT  
2. 232-0793 [1] WASHER-SPECIAL  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
 

#SEBP45460176
 

334-0280: PUMP GP-FILTER & FUEL TRANSFER

334-0280 PUMP GP-FILTER & FUEL TRANSFER
Type 1
i03294666 SEBP4546
3340280 PUMP GP-FILTER & FUEL TRANSFER Parts scheme 3340280 PUMP GP-FILTER & FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your C1.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4694 [1] PLUG  
2. 033-7849 [2] PLUG  
3. 358-9226 [1] FILTER AS-FUEL  
3A. 067-6987 [1] KIT-ELEMENT (FUEL FILTER)  
4. 067-6269 [2] FERRULE  
5. 067-6317 [1] WASHER (0.4X0.566X0.04-IN THK)  
6. 183-4036 [1] CONNECTOR  
7. 138-7162 [2] BOLT (M10X1.5X30-MM)  
8. 153-5592 M [1] NUT (M8X1.25-THD)  
10. 154-1399 [2] WASHER  
11. 154-2403 [2] WASHER  
12. 155-7984 [3] WASHER (8.4X16X1.6-MM THK)  
13. 155-8085 [2] NUT  
14. 329-1292 [2] CLIP-HOSE  
15. 165-2141 M [3] BOLT (M8X1.25X20-MM)  
16. 183-4320 [1] PUMP AS-FUEL TRANSFER  
17. 476-2680 [1] BRACKET  
20. 311-9048 [1] WASHER  
21. 483-1369 [1] BRACKET  
22. 243-6411 [1] FILTER AS-FUEL  
23. 476-5585 [1] HOSE-FUEL  
24. 302-4187 [2] TUBE  
  M   METRIC PART
 

#SEBP45460177
 

334-0280: PUMP GP-FILTER & FUEL TRANSFER

334-0280 PUMP GP-FILTER & FUEL TRANSFER
Type 2
i07223771 SEBP4546
3340280 PUMP GP-FILTER & FUEL TRANSFER Parts scheme 3340280 PUMP GP-FILTER & FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your C1.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4694 [1] PLUG  
2. 033-7849 [2] PLUG  
3. 358-9226 [1] FILTER AS-FUEL  
3A. 067-6987 [1] KIT-ELEMENT (FUEL FILTER)  
4. 067-6269 [2] FERRULE  
5. 067-6317 [1] WASHER (0.4X0.566X0.04-IN THK)  
6. 183-4036 [1] CONNECTOR  
7. 138-7162 [2] BOLT (M10X1.5X30-MM)  
8. 153-5592 M [1] NUT (M8X1.25-THD)  
10. 154-1399 [2] WASHER  
11. 154-2403 [2] WASHER  
13. 155-8085 [2] NUT  
14. 329-1292 [2] CLIP-HOSE  
15. 124-3815 CM [3] BOLT (M8X1.25X16-MM)  
16. 183-4320 [1] PUMP AS-FUEL TRANSFER  
17. 476-2680 [1] BRACKET  
20. 311-9048 [1] WASHER  
21. 483-1369 [1] BRACKET  
22. 243-6411 [1] FILTER AS-FUEL  
23. 476-5585 [1] HOSE-FUEL  
24. 302-4187 [2] TUBE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP45460178
 

293-3246: PUMP GP-FUEL INJECTION

293-3246 PUMP GP-FUEL INJECTION
PART OF 322-3103 PUMP GP-FUEL INJECTION
i03489721 SEBP4546
2933246 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your C1.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 205-4726 [1] BOLT-SPECIAL (BANJO)  
2. 205-4727 [2] WASHER  
3. 205-4728 [1] CONNECTOR  
4. 419-7640 [1] SOLENOID AS (12-VOLT)(FUEL SHUTOFF)  
 

#SEBP45460179
 

313-1968: PUMP GP-FUEL INJECTION

313-1968 PUMP GP-FUEL INJECTION
PART OF 435-1643 ENGINE AR
i02773247 SEBP4546
3131968 PUMP GP-FUEL INJECTION Parts scheme 3131968 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your C1.1 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-5960 M [4] NUT (M6X1-THD)  
2. 153-6415 [1] WASHER  
3. 153-7640 [2] BOLT (M6X1X20-MM)  
4. 426-4357 [3] GASKET  
5. 153-6385 B [1] SHIM (0.2-MM THK)  
  161-1432 B [1] SHIM (0.3-MM THK)  
  161-1433 B [1] SHIM (0.4-MM THK)  
  161-1434 B [1] SHIM (0.5-MM THK)  
  161-1435 B [1] SHIM (0.9-MM THK)  
  312-1583 B [1] SHIM (0.25-MM THK)  
  312-1582 B [1] SHIM (0.35-MM THK)  
6. 183-3353 [2] BOLT (M6X1X25-MM)  
7. 231-7702 [1] TUBE AS (CYL NO. 1)  
8. 231-7703 [1] TUBE AS (CYL NO. 2)  
9. 231-7704 [1] TUBE AS (CYL NO. 3)  
10. 231-7739 [1] LINE AS  
11. 232-0218 [2] CLAMP  
12. 232-0290 [1] CONNECTOR  
13. 252-9229 [3] INJECTOR AS-FUEL  
    (EACH INCLUDES)
13A. 232-0793 [1] WASHER-SPECIAL  
14. 290-8014 [4] CLAMP  
15. 313-2039 [1] PUMP AS-FUEL INJECTION  
16. 313-2040 [1] HOSE  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Primary Filter/Water Separator - Drain
C0.5, C0.7, C1.1, C1.5, C1.6 and C2.2 Industrial Engines
Fuel System Secondary Filter - Replace
C0.5, C0.7, C1.1, C1.5, C1.6 and C2.2 Industrial Engines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Filter Base - Remove and Install - C0.5 and C0.7 Engines
C0.5, C0.7, C1.1, C1.5, C1.6 and and C2.2 Industrial Engines
Fuel Filter Base - Remove and Install - C1.1, C1.5, C1.6 and C2.2 Engines
C0.5, C0.7, C1.1, C1.5, C1.6 and and C2.2 Industrial Engines

Caterpillar Parts SIS Catalog C1.1 :

CONTROL GP-GOVERNOR
454-6112 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
364-2742 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
329-9764 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
328-1430 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
328-1430 CONTROL GP-GOVERNOR
MANIFOLD GP-EXHAUST
329-4424 MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
325-5596 MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
313-1991 MANIFOLD GP-EXHAUST
GOVERNOR GP
313-6214 GOVERNOR GP
GOVERNOR GP
321-3142 GOVERNOR GP
GOVERNOR GP
323-2408 GOVERNOR GP
GOVERNOR GP
454-5352 GOVERNOR GP
INJECTOR GP-FUEL
366-1272 INJECTOR GP-FUEL
PUMP GP-FILTER & FUEL TRANSFER
334-0280 PUMP GP-FILTER & FUEL TRANSFER
PUMP GP-FILTER & FUEL TRANSFER
334-0280 PUMP GP-FILTER & FUEL TRANSFER
PUMP GP-FUEL INJECTION
293-3246 PUMP GP-FUEL INJECTION

Truck sale:

2008 CAT C1.1
USD $2,118 
2008 CAT C1.1

TARGET CARS BV
EINDHOVEN-AIRPORT, The Netherlands
CAT C1.1
USD $2,172 
CAT C1.1

TARGET CARS BV
EINDHOVEN-AIRPORT, The Netherlands
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.