AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

263-7434 COVER GP-SHIPPING -TRANSMISSION S/N JP21-UP; MKD1-UP; TSZ1-UP PART OF 370-6589, 396-3303 TRANSMISSION AR 12M


POWER TRAIN
TRANSMISSION GP
DIFFERENTIAL & BEVEL GEAR GP
DRIVE GP-FINAL
FILLER GP-POWER TRAIN OIL
FILTER GP

MOTOR GRADER 12M MOTOR GRADER B92
 12M Motor Grader B9200001-UP (MACHINE) POWERED BY C7.2 Engine SEBP4558 12M B92   (2012)

POWER TRAIN

TRANSMISSION GP
CLUTCH GP-TRANSMISSION
235-2414 CLUTCH GP-TRANSMISSION
CLUTCH GP-TRANSMISSION
247-8303 CLUTCH GP-TRANSMISSION
COVER GP-SHIPPING
263-7434 COVER GP-SHIPPING
SHAFT GP-INPUT
305-2148 SHAFT GP-INPUT
TRANSMISSION AR
370-6589 TRANSMISSION AR
TRANSMISSION AR
370-6589 TRANSMISSION AR
 

#SEBP45580410
 

263-7434: COVER GP-SHIPPING

263-7434 COVER GP-SHIPPING -TRANSMISSION
S/N JP21-UP; MKD1-UP; TSZ1-UP
PART OF 370-6589, 396-3303 TRANSMISSION AR
i02775355 SEBP4558
2637434 COVER GP-SHIPPING Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
2. 7J-3554 [1] COVER  
3. 8T-8737 [30] PLUG-SEAL  
4. 9H-0846 [1] SEAL-O-RING  
5. 117-2927 [1] COVER-SHIPPING  
6. 126-1773 [2] CAP-CONNECTOR  
7. 5N-4454 [1] BOOT  
9. 175-3721 [1] COVER  
10. 179-1539 [1] GASKET  
13. 148-8406 [2] PLUG AS  
    (EACH INCLUDES)
  9S-9334 [1] PLUG (1-5/16-12-THD)  
  7M-8485 [1] SEAL-O-RING  
14. 148-8407 [2] PLUG AS  
    (EACH INCLUDES)
  9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
15. [1] PLUG AS  
  9S-4183 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
16. 155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
17. 155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
18. 179-1538 [1] COVER  
19. 2D-0094 [1] GASKET  
20. 4M-0189 [1] SEAL-O-RING  
21. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 6V-3823 M [10] BOLT (M12X1.75X60-MM)  
23. 6V-8149 M [10] NUT (M12X1.75-THD)  
24. 6V-9833 [1] CAP  
25. 8T-0293 M [4] BOLT (M12X1.75X20-MM)  
26. 371-7951 [1] CAP-PLUG  
27. 8E-5287 [1] STRAP  
28. 9M-2904 [1] CLAMP-HOSE  
  M   METRIC PART
 

#SEBP45580411
 

365-2124: DIFFERENTIAL & BEVEL GEAR GP

365-2124 DIFFERENTIAL & BEVEL GEAR GP
S/N B921-UP
PART OF 365-2125 AXLE GP-REAR
i04081530 SEBP4558
3652124 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-1677 [1] RACE-BEARING INNER  
2. 1J-2860 [1] CUP-BEARING  
3. 2D-9455 [1] CONE-BEARING  
4. 7S-4001 [1] SEAL-O-RING  
5. 201-7713 [1] BEARING AS  
6. 201-8481 [1] LOCKNUT AS  
  314-3260 [4] BOLT-LOCKING (M8X1.25X18-MM)  
7. 222-7843 [1] SHROUD  
8. 264-0575 [1] SEAL-LIP TYPE  
9. 272-7121 [1] YOKE AS  
  271-8680 [1] GUARD  
10. 271-8528 B [1] SHIM PACK (INCLUDES 18-SHIMS)  
11. 271-8529 [1] RETAINER  
12. 272-7116 [1] HOUSING-PINION  
13. 287-8223 Y [1] DIFFERENTIAL GP  
14. 293-0213 [1] SHAFT-BEVEL PINION  
15. 290-7296 M [20] BOLT (M16X2X40-MM)  
16. 309-8763 [1] GEAR-BEVEL (44-TEETH)  
17. 5A-3604 M [3] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
18. 1J-4757 [1] CONE-BEARING  
19. 2D-9454 [1] CUP-BEARING  
20. 8C-0622 [1] RING-RETAINING  
21. 286-9155 M [1] BOLT-SELF-LOCKING (M16X2X120-MM)  
22. 9X-8268 [20] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45580412
 

287-8223: DIFFERENTIAL GP

287-8223 DIFFERENTIAL GP
S/N B921-UP
PART OF 365-2124 DIFFERENTIAL & BEVEL GEAR GP
i02781065 SEBP4558
2878223 DIFFERENTIAL GP Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5F-9144 [3] SEAL-O-RING  
2. 148-7841 [3] SPRING  
3. 201-8476 [9] PLATE-SEPARATOR  
4. 201-8477 [9] DISC-FRICTION  
5. 201-8480 [1] PLATE-THRUST  
6. 221-8040 [3] DOWEL  
7. 239-3105 [1] RING-THRUST  
8. 287-8222 [1] CASE AS-DIFFERENTIAL  
8A. 8T-5002 M [8] BOLT (M16X2X180-MM)  
8B. 2S-0736 [8] WASHER-HARD (17X27X3.5-MM THK)  
9. 293-5368 [4] BUSHING  
10. 305-3353 [2] WASHER-THRUST  
11. 305-3352 [4] WASHER-THRUST  
12. 306-5622 [1] SPIDER  
13. 306-5628 [1] GEAR-DIFFERENTIAL BEVEL (44-TEETH)  
14. 306-5629 [1] GEAR-DIFFERENTIAL BEVEL (16-TEETH)  
15. 306-5635 [4] PINION-DIFFERENTIAL  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  M   METRIC PART
 

#SEBP45580413
 

288-6508: DRIVE GP-FINAL

288-6508 DRIVE GP-FINAL -RH
S/N B921-UP
PART OF 365-2125 AXLE GP-REAR
i02781095 SEBP4558
2886508 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-8394 [2] CUP-BEARING  
2. 547-6515 [1] WASHER-THRUST (261.8X309X7-MM THK)  
3. 7D-8439 B [5] SHIM (0.007-IN THK)  
4. 7D-8441 B [5] SHIM (0.005-IN THK)  
5. 8D-3902 [1] SEAL-LIP TYPE  
6. 9D-3075 [1] RETAINER  
7. 9D-7047 B [2] SHIM (0.02-MM THK)  
8. 202-6473 M [30] BOLT (M16X2X60-MM)  
9. 255-8575 [1] SHAFT-DRIVE  
10. 264-0194 [1] RETAINER  
11. 264-0196 B [1] SHIM PACK (INCLUDES 10-SHIMS)  
12. 266-0199 [2] RING-WEAR  
14. 272-8009 Y [1] CARRIER GP-FINAL DRIVE  
15. 278-3320 [2] SPROCKET  
16. 279-2568 [1] GEAR-RING (84-TEETH)  
17. 329-0411 [1] SEAL-LIP TYPE  
18. 284-5016 [1] HOUSING  
19. 291-6874 [1] HOUSING-FINAL DRIVE  
20. 6V-3303 M [3] BOLT (M16X2X60-MM)  
21. 198-4768 [24] WASHER-HARD (17.5X32X8-MM THK)  
22. 2B-9174 [1] BEARING AS-TAPERED ROLLER  
23. 4D-3704 [18] WASHER-HARD (17X30X5-MM THK)  
24. 4D-6695 [1] SEAL-O-RING  
25. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 6V-2449 [1] CONE-BEARING  
27. 8T-0372 M [3] BOLT (M12X1.75X90-MM)  
28. 8T-3727 [1] RING-RETAINING  
29. 9F-2247 [1] PLUG-PIPE (1/8-27-THD)  
30. 178-3707 M [12] BOLT (M16X2X50-MM)  
31. 328-9669 [1] WASHER-THRUST (261.8X303X7-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45580414
 

288-6509: DRIVE GP-FINAL

288-6509 DRIVE GP-FINAL -LH
S/N B921-UP
PART OF 365-2125 AXLE GP-REAR
i02781094 SEBP4558
2886509 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-8394 [2] CUP-BEARING  
2. 547-6515 [1] WASHER-THRUST (261.8X309X7-MM THK)  
3. 7D-8439 B [5] SHIM (0.007-IN THK)  
  7D-8441 BF [5] SHIM (0.005-IN THK)  
5. 8D-3902 [1] SEAL-LIP TYPE  
6. 9D-3075 [1] RETAINER  
7. 9D-7047 B [2] SHIM (0.02-MM THK)  
8. 202-6473 M [30] BOLT (M16X2X60-MM)  
9. 255-8575 [1] SHAFT-DRIVE  
10. 264-0194 [1] RETAINER  
11. 264-0196 B [1] SHIM PACK (INCLUDES 10-SHIMS)  
12. 266-0199 [2] RING-WEAR  
14. 272-8009 Y [1] CARRIER GP-FINAL DRIVE  
15. 278-3320 [2] SPROCKET  
16. 279-2568 [1] GEAR-RING (84-TEETH)  
17. 329-0411 [1] SEAL-LIP TYPE  
18. 284-5018 [1] HOUSING  
19. 291-6874 [1] HOUSING-FINAL DRIVE  
20. 6V-3303 M [3] BOLT (M16X2X60-MM)  
21. 198-4768 [24] WASHER-HARD (17.5X32X8-MM THK)  
22. 2B-9174 [1] BEARING AS-TAPERED ROLLER  
23. 4D-3704 [18] WASHER-HARD (17X30X5-MM THK)  
24. 4D-6695 [1] SEAL-O-RING  
25. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 6V-2449 [1] CONE-BEARING  
27. 8T-0372 M [3] BOLT (M12X1.75X90-MM)  
28. 8T-3727 [1] RING-RETAINING  
29. 9F-2247 [1] PLUG-PIPE (1/8-27-THD)  
30. 178-3707 M [12] BOLT (M16X2X50-MM)  
31. 328-9669 [1] WASHER-THRUST (261.8X303X7-MM THK)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45580415
 

349-6137: FILLER GP-POWER TRAIN OIL

349-6137 FILLER GP-POWER TRAIN OIL
S/N B921-UP
PART OF 349-6146 POWER TRAIN AR
i03934091 SEBP4558
3496137 FILLER GP-POWER TRAIN OIL Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 397-1180 [1] TUBE AS  
2. 8B-1615 [1] GASKET  
 

#SEBP45580416
 

357-6336: FILLER GP-POWER TRAIN OIL

357-6336 FILLER GP-POWER TRAIN OIL
S/N B921-UP
PART OF 393-6123 COMMON AR
i04350172 SEBP4558
3576336 FILLER GP-POWER TRAIN OIL Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-5127 [1] BREATHER (ATMOSPHERIC)(POWER TRAIN OIL)  
2. 254-3286 [1] GAUGE AS-OIL LEVEL (DIPSTICK) (POWER TRAIN OIL)  
3. 265-9383 [1] TUBE AS  
4. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
5. 7J-8611 [1] ELBOW-PIPE  
6. 8B-1615 [1] GASKET  
7. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
  M   METRIC PART
 

#SEBP45580417
 

250-8292: FILTER & MTG GP-TRANSMISSION

250-8292 FILTER & MTG GP-TRANSMISSION
S/N MKD1-1234; TSZ1-464
PART OF 370-6589, 396-3303 TRANSMISSION AR
i03855112 SEBP4558
2508292 FILTER & MTG GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 289-2047 [1] PLATE AS  
2. CY [1] FILTER GP-OIL (TRANSMISSION)  
3. 130-5300 [1] CLIP  
4. 4P-7581 [1] CLIP (LADDER)  
5. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4184 M [2] BOLT (M12X1.75X45-MM)  
7. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
8. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-5035 M [1] BOLT (M10X1.5X65-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45580418
 

381-0657: FILTER & MTG GP-TRANSMISSION

381-0657 FILTER & MTG GP-TRANSMISSION
S/N MKD1135-UP; TSZ465-2867
PART OF 370-6589, 396-3303 TRANSMISSION AR
i05377773 SEBP4558
3810657 FILTER & MTG GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 289-2047 [1] PLATE AS  
2. 368-4921 Y [1] FILTER GP-OIL (TRANSMISSION)  
3. 130-5300 [1] CLIP  
4. 4P-7581 [1] CLIP (LADDER)  
5. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4184 M [2] BOLT (M12X1.75X45-MM)  
7. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
8. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-5035 M [1] BOLT (M10X1.5X65-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45580419
 

520-5008: FILTER & MTG GP-TRANSMISSION

520-5008 FILTER & MTG GP-TRANSMISSION
S/N JP21-UP; TSZ2868-UP
PART OF 396-3303 TRANSMISSION AR
i07358280 SEBP4558
5205008 FILTER & MTG GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-1932 [1] ADAPTER  
2. 6V-0852 [1] CAP-DUST  
3. 150-3065 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-0484 [1] ELBOW  
4. 8C-3446 [1] VALVE-SAMPLING  
5. 8C-3447 [1] CAP-DUST  
6. 8L-2786 [1] SEAL-O-RING  
7. 8T-0151 [1] ADAPTER  
8. 253-5327 [1] ELBOW  
9. 332-8833 Y [1] FILTER GP-OIL (MEDIUM PRESSURE)  
10. 520-5007 [1] BRACKET AS  
11. 130-5300 [1] CLIP  
12. 162-0177 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
13. 214-7568 [1] SEAL-O-RING  
14. 307-2673 [1] PLUG AS  
  9S-8005 [1] PLUG (3/4-16-THD)  
  238-5080 [1] SEAL-O-RING  
15. 4P-7581 [1] CLIP (LADDER)  
16. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  214-7568 [1] SEAL-O-RING  
17. 6V-5048 [2] SEAL-O-RING  
18. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4184 M [2] BOLT (M12X1.75X45-MM)  
20. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
21. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 148-8406 [2] PLUG AS  
    (EACH INCLUDES)
  7M-8485 [1] SEAL-O-RING  
  9S-9334 [1] PLUG (1-5/16-12-THD)  
23. 3S-2093 [1] STRAP-CABLE  
24. 132-5789 [1] CLIP (LADDER)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Transmission and Differential Oil Sample - Obtain
12M Motor Grader
Transmission and Differential Oil - Change
12M Motor Grader
Transmission and Differential Oil Level - Check
12M Motor Grader
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CASE ON CERTAIN 12M, 12M 3, 14M, 16M 3, 18M 3, 120M, 120M 2, 140M, 140M 3, AND 160M 3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CASE ON CERTAIN 12M, 12M 3, 14M, 16M 3, 18M 3, 120M, 120M 2, 140M, 140M 3, AND 160M 3 MOTOR GRADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Failure of Pressure Sensor Gp in Certain M Series and M Series 2 Motor Graders{3080, 7620}
Failure of Pressure Sensor Gp in Certain M Series and M Series 2 Motor Graders{3080, 7620}
Specifications
Transmission
120M, 12M, 140M and 160M Motor Graders Power Train
Speed Sensor (Transmission) - Intermediate
120M, 12M, 140M and 160M Motor Graders Power Train
Speed Sensor (Transmission) - Input and Output
120M, 12M, 140M and 160M Motor Graders Power Train
Transmission Case
120M, 12M, 140M and 160M Motor Graders Power Train
Parking Brake
120M, 12M, 140M and 160M Motor Graders Power Train
Magnetic Screen (Transmission)
120M, 12M, 140M and 160M Motor Graders Power Train
Tool Operating Manual
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CASE ON CERTAIN 12M, 12M 3, 14M, 16M 3, 18M 3, 120M, 120M 2, 140M, 140M 3, AND 160M 3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CASE ON CERTAIN 12M, 12M 3, 14M, 16M 3, 18M 3, 120M, 120M 2, 140M, 140M 3, AND 160M 3 MOTOR GRADERS
Service Letter-Asia
Systems Operation
Transmission Power Flow
120M, 12M, 140M and 160M Motor Graders
Power Train Hydraulic System
120M, 12M, 140M and 160M Motor Graders
Reuse And Salvage Guidelines
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CASE ON CERTAIN 12M, 12M 3, 14M, 16M 3, 18M 3, 120M, 120M 2, 140M, 140M 3, AND 160M 3 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION CASE ON CERTAIN 12M, 12M 3, 14M, 16M 3, 18M 3, 120M, 120M 2, 140M, 140M 3, AND 160M 3 MOTOR GRADERS
Testing and Adjusting
Transmission Pressures - Test and Adjust
120M, 12M, 140M and 160M Motor Graders
Parking Brake - Test - Use This Test for the <B>352-5716</B> Power Train Software Gp and All Newer Software
120M, 12M, 140M and 160M Motor Graders
Bench Test Procedures
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission - Remove and Install
12M Motor Grader Power Train
Transmission - Disassemble
12M Motor Grader Power Train
Transmission - Assemble
12M Motor Grader Power Train
Service Magazine
Cat&reg; Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}
2014/09/11
Maximizing Transmission Shift Performance on Certain M, M2, and M3 Series Motor Graders {3030, 7000}
Maximizing Transmission Shift Performance on Certain M, M2, and M3 Series Motor Graders {3030, 7000}
New Clutch Pistons Now Available for 120-160 Series M, M2, M3, K, H, and 14 Series L Motor Graders {3030, 3063, 3155, 3170}
New Clutch Pistons Now Available for 120-160 Series M, M2, M3, K, H, and 14 Series L Motor Graders {3030, 3063, 3155, 3170}

Caterpillar Parts SIS Catalog 12M :

COUPLING GP-TORSIONAL
8E-3366 COUPLING GP-TORSIONAL
COOLER GP-TRANSMISSION OIL
272-1045 COOLER GP-TRANSMISSION OIL
CONTROL GP-TRANSMISSION HYD
423-4654 CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
415-1190 CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
253-8425 CONTROL GP-TRANSMISSION HYD
CONTROL GP-DIFFERENTIAL LOCK
356-2977 CONTROL GP-DIFFERENTIAL LOCK
CLUTCH GP-TRANSMISSION
247-8303 CLUTCH GP-TRANSMISSION
CLUTCH GP-TRANSMISSION
235-2414 CLUTCH GP-TRANSMISSION
DIFFERENTIAL & BEVEL GEAR GP
365-2124 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL GP
287-8223 DIFFERENTIAL GP
DRIVE GP-FINAL
288-6508 DRIVE GP-FINAL
DRIVE GP-FINAL
288-6509 DRIVE GP-FINAL
FILLER GP-POWER TRAIN OIL
349-6137 FILLER GP-POWER TRAIN OIL
FILLER GP-POWER TRAIN OIL
357-6336 FILLER GP-POWER TRAIN OIL
FILTER & MTG GP-TRANSMISSION
250-8292 FILTER & MTG GP-TRANSMISSION
FILTER & MTG GP-TRANSMISSION
381-0657 FILTER & MTG GP-TRANSMISSION

Truck sale:

 
181,000 
Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA
 
187,500 
Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA
 
289,000 
Caterpillar 12M2, Construction
- motor graders
WAGNER EQUIPMENT CO
 
170,000 
Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA
Caterpillar 12M2, Construction
205,000 
Caterpillar 12M2, Construction
- motor graders
CAROLINA CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.