AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

324-0889 RIPPER AR S/N B921-UP PART OF 425-0295, 425-0297, 449-5479, 449-5480, 466-7412, 466-7413, 546-1953, 579-6817 DISTRIBUTION AR FOR USE WITH @@@@@309-9873@@@@@, @@@@@365-3355@@@@@ CANNOT BE USED WITH @@@@@337-7510@@@@@, @@@@@393-4882@@@@@ FOR USAGE REFER TO CHART @@@@@309-9873@@@@@ AN ATTACHMENT 12M


WORK TOOLS
RIPPER GP
SCARIFIER GP
GROUND ENGAGING TOOLS (G.E.T.)
SERVICE EQUIPMENT AND SUPPLIES
BOX GP-TOOL
CHARTS & FILMS

MOTOR GRADER 12M MOTOR GRADER B92
 12M Motor Grader B9200001-UP (MACHINE) POWERED BY C7.2 Engine SEBP4558 12M B92   (2012)

WORK TOOLS

RIPPER GP
MOUNTING GP-RIPPER
248-1323 MOUNTING GP-RIPPER
MOUNTING GP-RIPPER
332-2282 MOUNTING GP-RIPPER
296-3528 RIPPER AR
RIPPER AR
324-0889 RIPPER AR
RIPPER GP
290-3518 RIPPER GP
RIPPER GP
325-3355 RIPPER GP
 

#SEBP45580920
 

324-0889: RIPPER AR

324-0889 RIPPER AR
S/N B921-UP
PART OF 425-0295, 425-0297, 449-5479, 449-5480, 466-7412, 466-7413, 546-1953, 579-6817 DISTRIBUTION AR
FOR USE WITH @@@@@309-9873@@@@@, @@@@@365-3355@@@@@
CANNOT BE USED WITH @@@@@337-7510@@@@@, @@@@@393-4882@@@@@
FOR USAGE REFER TO CHART @@@@@309-9873@@@@@
AN ATTACHMENT
i03921231 SEBP4558
3240889 RIPPER AR Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 325-3355 Y [1] RIPPER GP  
2. 326-2227 Y [1] CYLINDER GP-RIPPER  
3. 332-2282 Y [1] MOUNTING GP-RIPPER  
4. 334-8069 Y [1] LINES GP-RIPPER (REAR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP45580921
 

290-3518: RIPPER GP

290-3518 RIPPER GP
S/N B921-UP
3-TEETH
PART OF 296-3528 RIPPER AR
AN ATTACHMENT
i02783081 SEBP4558
2903518 RIPPER GP Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-0120 [1] PIN  
2. 2K-0703 [1] BAR  
3. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)(HYDRAULIC)  
4. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
5. 4K-3150 [2] PIN  
6. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
7. 9J-0096 [2] LINK AS-UPPER  
    (EACH INCLUDES)
  3G-2581 [2] BEARING  
8. 9W-3155 [1] CARRIAGE AS  
  112-3690 [5] HOLDER-BIT  
9. 190-5386 [2] FILM-IDENTIFICATION (ROUND RED REFLECTIVE)  
10. 290-3519 [1] LINK AS-LOWER  
  3G-2579 [4] BEARING  
  5G-8760 [4] BOSS  
11. 2D-0626 [8] SEAL  
12. 8T-4198 M [2] BOLT (M10X1.5X100-MM)  
13. 6V-7687 M [10] LOCKNUT (M12X1.75-THD)  
14. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
15. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
16. 7K-9203 [8] SEAL-LIP TYPE  
17. 8J-7008 [2] PIN  
18. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
19. 8T-4910 M [7] BOLT (M12X1.75X60-MM)  
20. 8T-4648 M [1] BOLT (M12X1.75X70-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45580922
 

325-3355: RIPPER GP

325-3355 RIPPER GP
S/N B921-UP
PART OF 324-0889 RIPPER AR
AN ATTACHMENT
i03921177 SEBP4558
3253355 RIPPER GP Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-0703 [1] BAR  
2. 4K-3150 [2] PIN  
3. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
4. 190-5386 [2] FILM-IDENTIFICATION (ROUND RED REFLECTIVE)  
5. 325-3354 [1] CARRIAGE AS  
6. 332-2295 [1] LINK AS-LOWER  
7. 332-6143 [1] LINK & BEARING AS (RH)  
  3G-2581 [2] BEARING  
  325-3353 [1] LINK AS  
8. 332-6144 [1] LINK & BEARING AS (LH)  
  3G-2581 [2] BEARING  
  332-6145 [1] LINK AS  
9. 334-7584 [1] PIN  
10. 342-2107 [2] TRUNNION AS  
    (EACH INCLUDES)
10A. 332-2297 [1] BUSHING  
  4K-3004 [1] BEARING-TRUNNION SUPPLEMENTARY  
11. 2D-0626 [8] SEAL  
12. 5M-6214 [2] PLUG (1/8-27 PTF)  
13. 6V-7687 M [10] LOCKNUT (M12X1.75-THD)  
14. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
15. 7K-9203 [8] SEAL-LIP TYPE  
16. 7K-9205 [2] SEAL-LIP TYPE  
17. 8J-7008 [2] PIN  
18. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
19. 8T-4198 M [2] BOLT (M10X1.5X100-MM)  
20. 8T-4648 M [1] BOLT (M12X1.75X70-MM)  
21. 8T-4910 M [7] BOLT (M12X1.75X60-MM)  
22. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45580923
 

310-9425: SCARIFIER AR

310-9425 SCARIFIER AR -VEE TYPE
S/N B921-UP
PART OF 364-2034 OPTION AR-SCARIFIER
FOR USAGE REFER TO CHART @@@@@309-9873@@@@@
AN ATTACHMENT
i03101749 SEBP4558
3109425 SCARIFIER AR Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-2913 Y [1] CYLINDER & MTG GP-SCARIFIER  
2. 310-9428 Y [1] SCARIFIER GP (VEE TYPE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP45580924
 

310-9428: SCARIFIER GP

310-9428 SCARIFIER GP -VEE TYPE
S/N B921-UP
11-TEETH
PART OF 310-9425 SCARIFIER AR
AN ATTACHMENT
i03101762 SEBP4558
3109428 SCARIFIER GP Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0386 [2] BOLT (7/8-9X3.5-IN)  
3. 2G-4332 [1] BLOCK AS-SCARIFIER  
  7D-8825 [11] SPACER  
  7D-8826 [11] SPACER  
4. 6K-3632 [4] LOCKNUT (1-8-THD)  
5. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
6. 7X-0450 [4] NUT-FULL (1-1/8-7-THD)  
7. 4D-6086 [2] KEY  
8. 5B-0577 [2] COLLAR  
9. 5D-8159 [2] PIN AS  
10. 5K-1458 [11] GROMMET  
11. 5K-1459 [11] LOCK PIN  
12. 6B-3260 [1] TOOL  
13. 6F-6992 [4] CAP-BALL SOCKET  
14. 6Y-5230 [11] TOOTH-SCARIFIER  
15. 7D-2196 [2] SLEEVE AS-LINK  
    (EACH INCLUDES)
  7D-2136 [1] SOCKET-BALL  
16. 7F-1327 B [32] SHIM (0.03-IN THK)  
17. 8D-1268 [2] ARM AS-LIFT  
    (EACH INCLUDES)
  7D-8245 [1] STUD-BALL  
18. 7X-0443 [4] BOLT (1-8X5.5-IN)  
19. 7X-0423 [4] BOLT (1-1/8-7X4.5-IN)  
20. 8W-0663 [2] BRACKET AS  
    (EACH INCLUDES)
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
  107-8374 [2] BEARING  
21. 8X-6075 [1] BOLSTER AS  
22. 9D-5516 [2] LINK AS-LIFT  
    (EACH INCLUDES)
  7D-2135 [1] SOCKET-BALL  
23. 107-8375 [1] SHAFT AS  
24. 118-7880 [1] DRAWBAR AS  
  2G-7728 [2] COLLAR  
  8W-5597 [1] STUD-BALL  
25. 118-7881 [1] DRAWBAR AS  
  2G-7728 [2] COLLAR  
  8W-5597 [1] STUD-BALL  
26. 195-7218 [11] SHANK  
27. 198-9811 B [16] SPACER (83X145X3-MM THK)  
28. 198-9812 B [3] SPACER (83X145X2-MM THK)  
29. 8T-8924 [8] BOLT (3/4-10X2.5-IN)  
30. 8C-8842 [4] BOLT (3/4-10X4-IN)  
31. 6V-8188 [2] NUT (1/2-13-THD)  
32. 330-6877 [1] SHAFT  
33. 6V-8182 [4] NUT (3/4-10-THD)  
34. 282-0882 [4] WASHER-HARD (33X56X6-MM THK)  
35. 5D-8161 [2] PIN  
36. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
37. 8T-4994 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
38. 8T-5361 [8] WASHER-HARD (28X49X5-MM THK)  
39. 6K-0545 [6] LOCKNUT (7/8-9-THD)  
40. 7X-0390 [4] BOLT (7/8-9X5-IN)  
41. 8C-6913 [4] WASHER-HARD (24X41.5X4-MM THK)  
42. 6C-9149 [8] WASHER (22X50X10-MM THK)  
43. 7X-0328 [2] BOLT (1/2-13X3.5-IN)  
  B   USE AS REQUIRED
 

#SEBP45580925
 

8J-1434: TOOTH GP-RIPPER

8J-1434 TOOTH GP-RIPPER -STRAIGHT
S/N B921-UP
PART OF 290-3518, 325-3355 RIPPER GP
AN ATTACHMENT
i00125368 SEBP4558
8J1434 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-5325 [2] PIN-COTTER  
2. 2K-6413 [1] PIN  
3. 9J-6586 [1] SHANK  
4. 136-8308 [1] PIN  
5. 6Y-0309 [1] TIP-RIPPER (PENETRATION)  
6. 114-0359 [1] RETAINER AS  
 

#SEBP45580926
 

4K-3330: TOOTH GP-SCARIFIER

4K-3330 TOOTH GP-SCARIFIER
S/N B921-UP
9 TEETH
PART OF 425-0295, 425-0297, 449-5479, 449-5480, 466-7412, 466-7413, 546-1953, 579-6817 DISTRIBUTION AR
AN ATTACHMENT
i00125175 SEBP4558
4K3330 TOOTH GP-SCARIFIER Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-1459 [9] LOCK PIN  
2. 5K-1458 [9] GROMMET  
3. 195-7218 [9] SHANK  
4. 6Y-5230 [9] TOOTH-SCARIFIER  
  6B-3260 F [1] TOOL  
  F   NOT SHOWN
 

#SEBP45580927
 

247-8622: BOX GP-TOOL

247-8622 BOX GP-TOOL
S/N B921-UP
PART OF 393-6123 COMMON AR
i03016733 SEBP4558
2478622 BOX GP-TOOL Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP  
  5P-8500 [1] KEY  
2. 8W-0791 [1] BOX AS-TOOL  
3. 8T-4226 C [2] WASHER-PLATED (10.5X45X3-MM THK)  
4. 7X-7729 C [6] WASHER (11X25X3-MM THK)  
5. 344-5675 M [2] NUT (M10X1.5-THD)  
6. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP45580928
 

381-8141: FILM GP

381-8141 FILM GP
S/N B921-UP
PART OF 379-3677, 389-5970, 420-1977 CAB AR
AN ATTACHMENT
i04865674 SEBP4558
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  356-2212 [2] FILM  
    (ON CAB INTERIOR SIDE OF TWO FRONT A-POSTS)
 

#SEBP45580929
 

393-6128: FILM GP

393-6128 FILM GP
S/N B921-UP
PART OF 393-6150, 393-6151 PLATE & FILM GP
AN ATTACHMENT
i04895973 SEBP4558
3936128 FILM GP Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] FILM-STRIPE (CAT HOOD, LH)  
2. [1] FILM-STRIPE (CAT HOOD, RH)  
3. 280-1033 [2] FILM-IDENTIFICATION (VHP 145)  
4. 280-1480 [1] FILM-IDENTIFICATION (CATERPILLAR)  
5. [2] FILM-STRIPE (12M)  
 

Information:

Operation and Maintenance Manual
Ripper Tip - Inspect/Replace
12M Motor Grader
Ripper Cylinder Bearings - Lubricate
12M Motor Grader
Disassembly and Assembly
Ripper - Remove
12M Motor Grader Machine Systems
Ripper - Install
12M Motor Grader Machine Systems

Caterpillar Parts SIS Catalog 12M :

296-3528 RIPPER AR
MOUNTING GP-RIPPER
332-2282 MOUNTING GP-RIPPER
MOUNTING GP-RIPPER
248-1323 MOUNTING GP-RIPPER
252-7086 MOUNTING GP-BLADE
312-2204 LIFT GP-WORK TOOL
LIFT GP-WORK TOOL
293-5556 LIFT GP-WORK TOOL
LIFT GP-WORK TOOL
293-5556 LIFT GP-WORK TOOL
LIFT GP-BLADE
296-3008 LIFT GP-BLADE
RIPPER GP
290-3518 RIPPER GP
RIPPER GP
325-3355 RIPPER GP
SCARIFIER AR
310-9425 SCARIFIER AR
SCARIFIER GP
310-9428 SCARIFIER GP
TOOTH GP-RIPPER
8J-1434 TOOTH GP-RIPPER
TOOTH GP-SCARIFIER
4K-3330 TOOTH GP-SCARIFIER
BOX GP-TOOL
247-8622 BOX GP-TOOL
381-8141 FILM GP

Truck sale:

 
181,000 
Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA
 
187,500 
Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA
 
289,000 
Caterpillar 12M2, Construction
- motor graders
WAGNER EQUIPMENT CO
 
170,000 
Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA
Caterpillar 12M2, Construction
205,000 
Caterpillar 12M2, Construction
- motor graders
CAROLINA CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.