SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSSERVICE CENTER GP
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS
#SEBP45580950
393-6150: PLATE & FILM GP
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 117-9978 E | FILM-STRIPE (RED)(10.2-CM EACH) | ||
| 2. | 5P-1174 | [1] | FILM-IDENTIFICATION (TRANSMISSION OIL FILL CAP) | |
| 3. | 5P-1175 | [1] | FILM-IDENTIFICATION (ENGINE OIL FILL) | |
| 4. | 246-2641 | [3] | PADLOCK GP | |
| (EACH INCLUDES) | ||||
| 5P-8500 | [1] | KEY | ||
| 5. | 9X-8355 | [1] | FILM-IDENTIFICATION (BLADE CENTERSHIFT) | |
| 6. | 109-0361 | [1] | FILM-INSTRUCTION (ENGINE SHUTDOWN) | |
| 7. | 129-7680 | [1] | FILM-INSTRUCTION (HYDRAULIC TANK OIL DRAIN) | |
| 8. | 134-7258 | [1] | FILM-INFORMATION (EXTENDED LIFE COOLANT) | |
| 9. | 146-6747 | [1] | FILM-INFORMATION (24-VOLT) | |
| 10. | 156-5762 | [2] | FILM-INFORMATION (TIE-DOWN LOCATION) | |
| 11. | 158-7864 | [1] | FILM-IDENTIFICATION (HYDRAULIC OIL) | |
| 12. | 190-5386 | [2] | FILM-IDENTIFICATION (ROUND RED REFLECTIVE) | |
| 13. | 225-4150 | [1] | PLATE-SERVICE INFORMATION (MACHINE) | |
| 14. | 226-1242 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK, U.S.) | |
| 15. | 226-1275 | [1] | FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.) | |
| 19. | 239-4990 | [2] | FILM-WARNING (HIGH PRESSURE CYLINDER) | |
| 20. | 239-6989 | [1] | PLATE-SERIAL NUMBER (MACHINE) | |
| 21. | 243-5289 | [2] | FILM-IDENTIFICATION (LIFT POINT) | |
| 22. | 248-5245 | [2] | FILM-INFORMATION (LIFT EYE, TIE-DOWN LOCATION) | |
| 24. | 249-8575 | [1] | FILM-WARNING (NO DRILL, WELD, READ OMM) | |
| 25. | 263-6901 | [1] | FILM-WARNING (HOT FLUID) | |
| 26. | 275-3292 | [1] | FILM-IDENTIFICATION (GREASE POINT) | |
| 27. | 286-1089 | [1] | FILM-INFORMATION (FLUID LEVEL) | |
| 28. | 293-3823 | [1] | FILM-IDENTIFICATION (ARTICULATION LOCK) | |
| 29. | 331-5818 | [2] | FILM-WARNING (HYDRAULIC STEERING) | |
| 30. | 329-5707 | [1] | FILM-IDENTIFICATION (OIL GRADE, READ OMM) | |
| 31. | 367-0844 | [1] | FILM-INSTRUCTION (FUEL, READ OMM) | |
| 33. | Y | [1] | FILM GP | |
| 34. | 225-0313 | [1] | FILM-WARNING (JUMP START, READ OMM, U.S.) | |
| 35. | 292-9390 J | [2] | FILM-WARNING (HAND CRUSH HAZARD, STAY BACK) | |
| E | ORDER BY THE CENTIMETER | |||
| J | ONLY WHEN USED WITH FOLD DOWN LIGHT BARS | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45580951
393-6151: PLATE & FILM GP
393-6151 PLATE & FILM GP
S/N B921-UP
PART OF 393-6130, 393-6131, 393-6132, 393-6133, 393-6142, 393-6143, 393-6144, 393-6145, 393-6146, 393-6147, 393-6148 PLATE & FILM GP
AN ATTACHMENT
S/N B921-UP
PART OF 393-6130, 393-6131, 393-6132, 393-6133, 393-6142, 393-6143, 393-6144, 393-6145, 393-6146, 393-6147, 393-6148 PLATE & FILM GP
AN ATTACHMENT
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | Y | [1] | FILM GP | |
| 2. | 5P-1174 | [1] | FILM-IDENTIFICATION (TRANSMISSION OIL FILL CAP) | |
| 3. | 5P-1175 | [1] | FILM-IDENTIFICATION (ENGINE OIL FILL) | |
| 4. | 246-2641 | [3] | PADLOCK GP | |
| (EACH INCLUDES) | ||||
| 5P-8500 | [1] | KEY | ||
| 5. | 9X-8355 | [1] | FILM-IDENTIFICATION (BLADE CENTERSHIFT) | |
| 6. | 109-0361 | [1] | FILM-INSTRUCTION (ENGINE SHUTDOWN) | |
| 7. | 129-7680 | [1] | FILM-INSTRUCTION (HYDRAULIC TANK OIL DRAIN) | |
| 8. | 134-7258 | [1] | FILM-INFORMATION (EXTENDED LIFE COOLANT) | |
| 9. | 146-6747 | [1] | FILM-INFORMATION (24-VOLT) | |
| 10. | 156-5762 | [2] | FILM-INFORMATION (TIE-DOWN LOCATION) | |
| 11. | 158-7864 | [1] | FILM-IDENTIFICATION (HYDRAULIC OIL) | |
| 12. | 190-5386 | [2] | FILM-IDENTIFICATION (ROUND RED REFLECTIVE) | |
| 13. | 292-9391 | [2] | FILM-WARNING (HAND CRUSH HAZARD, STAY BACK) | |
| 14. | 225-4150 | [1] | PLATE-SERVICE INFORMATION (MACHINE) | |
| 15. | 226-1240 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK, INTL) | |
| 16. | 226-1274 | [1] | FILM-WARNING (CRUSH HAZARD, READ OMM, INTL) | |
| 17. | 222-7944 | [2] | FILM-WARNING (DO NOT OPERATE, READ OMM, INTL) | |
| 18. | 241-3720 | [1] | FILM-WARNING (RECOIL SPRING) | |
| 20. | 239-4991 | [2] | FILM-WARNING (HIGH PRESSURE CYLINDER) | |
| 21. | 239-6989 | [1] | PLATE-SERIAL NUMBER (MACHINE) | |
| 23. | 243-5289 | [2] | FILM-IDENTIFICATION (LIFT POINT) | |
| 24. | 248-5245 | [2] | FILM-INFORMATION (LIFT EYE, TIE-DOWN LOCATION) | |
| 26. | 249-8575 | [1] | FILM-WARNING (NO DRILL, WELD, READ OMM) | |
| 27. | 263-6902 | [1] | FILM-WARNING (HOT FLUID) | |
| 28. | 275-3292 | [1] | FILM-IDENTIFICATION (GREASE POINT) | |
| 29. | 286-1089 | [1] | FILM-INFORMATION (FLUID LEVEL) | |
| 30. | 293-3823 | [1] | FILM-IDENTIFICATION (ARTICULATION LOCK) | |
| 31. | 334-6758 | [2] | FILM-WARNING (COLD START, READ OMM) | |
| 32. | 329-5707 | [1] | FILM-IDENTIFICATION (OIL GRADE, READ OMM) | |
| 33. | 367-0844 | [1] | FILM-INSTRUCTION (FUEL, READ OMM) | |
| 39. | 117-9978 E | FILM-STRIPE (RED)(22-CM) | ||
| AF | [1] | PLATE-SERIAL NUMBER (ENGINE) | ||
| (ON LH SIDE OF CYLINDER BLOCK TOWARD THE TOP & REAR FLAT AREA THAT WOULD BE ABOVE & BEHIND THE ECM WHEN MOUNTED) | ||||
| A | NOT PART OF THIS GROUP | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45580952
415-3518: PLATE & FILM GP
415-3518 PLATE & FILM GP
S/N TX71-UP; KHX1-UP
PART OF 422-8378 ENGINE AR
AN ATTACHMENT
S/N TX71-UP; KHX1-UP
PART OF 422-8378 ENGINE AR
AN ATTACHMENT
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS#SEBP45580953
236-8922: TANK GP-AIR
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-4278 | [1] | CLAMP-HOSE | |
| 2. | 1P-9328 | [1] | FITTING | |
| 3. | 2G-1034 | [1] | VALVE-AIR RELIEF | |
| 4. | 5F-5434 | [1] | VALVE AS-VENT | |
| 5. | 172-9284 | [1] | VALVE-BALL | |
| 6. | 205-7187 J | [1] | GOVERNOR AS (AIR COMPRESSOR) | |
| 2S-2923 | [1] | COVER AS | ||
| 7. | 177-0279 I | [1] | HOSE AS | |
| 9. | 246-6651 | [1] | TANK-AIR | |
| 13. | 4H-2558 | [1] | GROMMET | |
| 14. | 4S-7606 | [1] | ELBOW | |
| 15. | 6K-8178 | [2] | CLIP (LOOP) | |
| 16. | 6V-7535 | [1] | ELBOW-PIPE | |
| 17. | 7J-8611 | [1] | ELBOW-PIPE | |
| 18. | 8T-6757 | [4] | PLUG-PIPE | |
| 20. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 21. | 5P-1465 E | HOSE (104-CM) | ||
| 22. | 174-5907 | [1] | CLIP (LOOP) | |
| 23. | 164-5567 | [1] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 24. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 25. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 26. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-3844 M | [2] | BOLT (M6X1X70-MM) | |
| 28. | 148-8337 | [1] | CONNECTOR AS | |
| 4J-5477 | [1] | SEAL-O-RING | ||
| 8C-6866 | [1] | CONNECTOR | ||
| 29. | 6V-0852 | [1] | CAP-DUST | |
| 30. | 6D-9855 I | [1] | HOSE AS | |
| 31. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 32. | 310-4235 I | [1] | HOSE AS | |
| 33. | 169-5863 | [1] | ADAPTER AS | |
| 7X-7945 | [1] | ADAPTER (9/16-18-THD) | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 34. | 165-4931 | [1] | ELBOW AS | |
| 6V-8077 | [1] | ELBOW | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 36. | 2P-1279 | [1] | LOCKNUT (9/16-18-THD) | |
| 37. | 5B-7890 | [1] | PLUG-PIPE | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9M-0402 J | [1] | KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR) | ||
| (INCLUDES GROMMETS, FILTERS, SPRING, VALVE, COVER, RING, & GASKET) | ||||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
Information:
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS
Operation and Maintenance Manual
Service Magazine
Ordering a Replacement Machine Identification Plate {7405, 7557}
Ordering a Replacement Machine Identification Plate {7405, 7557}
Ordering a Replacement Machine Identification Plate {7405, 7557}
