HYDRAULIC SYSTEM
HYDRAULIC GPKICKOUT & POSITIONER GP
HYDRAULIC SYSTEM
HYDRAULIC GP#SEBP45620790
240-9454: HYDRAULIC AR-4 VALVE
240-9454 HYDRAULIC AR-4 VALVE -3-LEVER, WITH FNR
S/N DHC1-4199
PART OF 303-2038, 303-2039 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
S/N DHC1-4199
PART OF 303-2038, 303-2039 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 235-6860 Y | [1] | CONTROL GP-PILOT OPERATED HYD (JOYSTICK, 4-FUNCTION) | ||
| 245-4858 Y | [1] | LINES GP-HYDRAULIC (THIRD FUNCTION) | ||
| 245-4861 Y | [1] | LINES GP-HYDRAULIC (FOURTH FUNCTION) | ||
| 280-1998 Y | [1] | VALVE GP-MAIN CONTROL (4-FUNCTION) | ||
| -OR- | ||||
| 317-6909 Y | [1] | VALVE GP-MAIN CONTROL (4-FUNCTION) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45620791
241-0944: HYDRAULIC AR-4 VALVE
241-0944 HYDRAULIC AR-4 VALVE -2-LEVER, 3RD FUNCTION, PROPORTIONAL FLOW
S/N DHC1-4199
PART OF 303-2044, 303-2045 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
S/N DHC1-4199
PART OF 303-2044, 303-2045 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 266-7545 Y | [1] | CONTROL GP-JOYSTICK (3-FCTN, W/PROPNL FLOW, FNR) | ||
| 263-5812 Y | [1] | CONTROL GP-PILOT OPERATED HYD (JOYSTICK CONTROL, 4-FUNCTION) | ||
| 238-2656 Y | [1] | LINES GP-FRONT (3RD FCTN, PROPORTIONAL FLOW) | ||
| 245-4861 Y | [1] | LINES GP-HYDRAULIC (FOURTH FUNCTION) | ||
| 280-1998 Y | [1] | VALVE GP-MAIN CONTROL (4-FUNCTION) | ||
| -OR- | ||||
| 317-6909 Y | [1] | VALVE GP-MAIN CONTROL (4-FUNCTION) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45620792
303-2038: HYDRAULIC AR-4 VALVE
303-2038 HYDRAULIC AR-4 VALVE -3-LEVER, STANDARD LIFT MACHINES
S/N DHC1-4199
CANNOT BE USED WITH 303-2047 LINKAGE AR-FRONT
AN ATTACHMENT
S/N DHC1-4199
CANNOT BE USED WITH 303-2047 LINKAGE AR-FRONT
AN ATTACHMENT
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS#SEBP45620793
303-2039: HYDRAULIC AR-4 VALVE
303-2039 HYDRAULIC AR-4 VALVE -3-LEVER, HIGH LIFT MACHINES
S/N DHC1-4199
CANNOT BE USED WITH 303-2046 LINES GP-COUPLER
AN ATTACHMENT
S/N DHC1-4199
CANNOT BE USED WITH 303-2046 LINES GP-COUPLER
AN ATTACHMENT
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS#SEBP45620794
303-2044: HYDRAULIC AR-4 VALVE
303-2044 HYDRAULIC AR-4 VALVE -2-LEVER, 3RD FUNCTION, PROPORTIONAL FLOW, STANDARD LIFT MACHINES
S/N DHC1-4199
AN ATTACHMENT
S/N DHC1-4199
AN ATTACHMENT
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS#SEBP45620795
303-2045: HYDRAULIC AR-4 VALVE
303-2045 HYDRAULIC AR-4 VALVE -2-LEVER, 3RD FUNCTION, PROPORTIONAL FLOW, HIGH LIFT MACHINES
S/N DHC1-4199
AN ATTACHMENT
S/N DHC1-4199
AN ATTACHMENT
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS#SEBP45620796
242-0100: HYDRAULIC AR-6 VALVE
242-0100 HYDRAULIC AR-6 VALVE -2-LEVER, WITH FNR
S/N DHC1-4199
PART OF 303-2040 HYDRAULIC AR-6 VALVE
AN ATTACHMENT
S/N DHC1-4199
PART OF 303-2040 HYDRAULIC AR-6 VALVE
AN ATTACHMENT
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 242-0096 Y | [1] | CONTROL GP-PILOT OPERATED HYD (JOYSTICK, 4-FUNCTION) | ||
| 245-4858 Y | [1] | LINES GP-HYDRAULIC (THIRD FUNCTION) | ||
| 245-4861 Y | [1] | LINES GP-HYDRAULIC (FOURTH FUNCTION) | ||
| 242-0098 Y | [1] | VALVE & MTG GP-MAIN CONTROL (AUXILIARY; 5TH, 6TH FUNCTIONS) | ||
| 280-1998 Y | [1] | VALVE GP-MAIN CONTROL (4-FUNCTION) | ||
| -OR- | ||||
| 317-6909 Y | [1] | VALVE GP-MAIN CONTROL (4-FUNCTION) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45620797
303-2040: HYDRAULIC AR-6 VALVE
303-2040 HYDRAULIC AR-6 VALVE -2-LEVER, WITH FNR, STANDARD LIFT MACHINES
S/N DHC1-4199
CANNOT BE USED WITH 303-2047 LINKAGE AR-FRONT
AN ATTACHMENT
S/N DHC1-4199
CANNOT BE USED WITH 303-2047 LINKAGE AR-FRONT
AN ATTACHMENT
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS#SEBP45620798
113-3652: KICKOUT & POSITIONER GP
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-7843 CY | [1] | CONTROL GP-POSITION | |
| 2. | 3E-7844 Y | [1] | CONTROL GP-LIFT KICKOUT | |
| 3. | 5G-7820 | [1] | MAGNET AS | |
| 4. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 5. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 6. | 7K-1181 | [9] | STRAP-CABLE | |
| 7. | 7V-5626 | [4] | CLAMP | |
| 8. | 7V-5628 | [1] | PLATE (TOP) | |
| 9. | 118-0885 | [1] | SHAFT AS | |
| 10. | 118-0887 | [1] | CLAMP AS | |
| 11. | 122-6493 | [1] | PLATE AS | |
| 12. | 136-4794 | [1] | PLATE AS | |
| 13. | 138-6791 | [1] | PLATE | |
| 14. | 187-3662 | [1] | CLIP | |
| 15. | 262-0318 | [1] | TUBE AS | |
| 16. | 271-6452 | [1] | HARNESS AS-CONTROL (KICKOUT, POSITIONER) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 17. | 090-1740 | [1] | BAR | |
| 18. | 4P-7581 | [2] | CLIP (LADDER) | |
| 19. | 6V-7744 M | [1] | LOCKNUT (M10X1.5-THD) | |
| 20. | 6V-9189 M | [1] | LOCKNUT (M8X1.25-THD) | |
| 21. | 7X-2534 M | [4] | BOLT (M6X1X50-MM) | |
| 22. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 23. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 24. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 25. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 26. | 8T-4189 M | [5] | BOLT (M8X1.25X20-MM) | |
| 27. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 28. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 29. | 8T-4224 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 30. | 8T-6869 M | [1] | BOLT (M8X1.25X60-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45620799
235-6820: KICKOUT & POSITIONER GP
235-6820 KICKOUT & POSITIONER GP
S/N DHC1-3561
PART OF 289-8881, 290-6497, 357-6313 CHASSIS AR
S/N DHC1-3561
PART OF 289-8881, 290-6497, 357-6313 CHASSIS AR
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-7843 Y | [2] | CONTROL GP-POSITION (WORK TOOL) | |
| 2. | 3E-7844 Y | [1] | CONTROL GP-LIFT KICKOUT | |
| 3. | 5G-7820 | [1] | MAGNET AS | |
| 4. | 7K-1181 | [2] | STRAP-CABLE | |
| 5. | 7V-5626 | [4] | CLAMP | |
| 6. | 7V-5628 | [1] | PLATE (TOP) | |
| 7. | 132-2694 | [1] | HARNESS AS-CONTROL (KICKOUT, POSITIONER) | |
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 136-4794 | [1] | PLATE AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 9. | 148-7860 | [1] | SHAFT AS | |
| 10. | 195-0922 | [1] | SWITCH AS-ROCKER (BUCKET, FORK SELECT) | |
| 111-7899 | [1] | GASKET | ||
| 11. | 240-5843 | [1] | TUBE AS | |
| 12. | 240-9450 | [1] | BRACKET | |
| 13. | 264-7734 | [1] | SPACER | |
| 14. | 4P-7581 | [1] | CLIP (LADDER) | |
| 15. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 16. | 5P-4116 | [6] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 17. | 7X-2534 M | [4] | BOLT (M6X1X50-MM) | |
| 18. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 19. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 21. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 22. | 8T-4189 M | [8] | BOLT (M8X1.25X20-MM) | |
| 23. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 24. | 8T-6870 M | [1] | BOLT (M8X1.25X70-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
