HYDRAULIC SYSTEM
PUMP GPTANK GP
HYDRAULIC SYSTEM
PUMP GP
#SEBP45620900
299-3941: PUMP GP-GEAR
299-3941 PUMP GP-GEAR -BRAKE, HYDRAULIC FAN
S/N DHC1-4199; CXK1-2021
PART OF 288-4162 PUMP GP-GEAR
S/N DHC1-4199; CXK1-2021
PART OF 288-4162 PUMP GP-GEAR
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 204-4148 | [1] | SEAL-SHAFT | |
| 2. | 131-0715 | [1] | SEAL-SHAFT | |
| 3. | 220-2657 | [1] | FLANGE | |
| 4. | 099-3095 | [3] | DOWEL | |
| 5. | 4W-7356 | [2] | SEAL-O-RING | |
| 6. | 6E-2943 | [1] | PLUG (DRAIN) | |
| 7. | 270-2615 H | [1] | VALVE GP-ACCUMULATOR CHARGING (BRAKE) | |
| 8. | 199-3778 M | [2] | BOLT-SOCKET HEAD (M10X1.5X170-MM) | |
| 9. | 8T-0272 M | [1] | BOLT-SOCKET HEAD (M10X1.5X110-MM) | |
| 10. | 086-2369 M | [1] | BOLT-SOCKET HEAD (M10X1.5X130-MM) | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 201-5242 | [1] | KIT-SEAL (GEAR PUMP) | ||
| (INCLUDES DUST SEAL, BACKUP RING, E-SEALS & O-RING SEALS) | ||||
| 270-2616 H | [1] | KIT-SEAL | ||
| (INCLUDES O-RING SEALS, POPPETS, PLUG & FILTER) | ||||
| H | KIT MARKED H SERVICES PART(S) MARKED H | |||
| M | METRIC PART | |||
#SEBP45620901
120-0140: PUMP GP-PISTON
120-0140 PUMP GP-PISTON -STEERING, PILOT
S/N CXK1-2021
PART OF 119-7698 PUMP GP-PISTON & VANE
S/N CXK1-2021
PART OF 119-7698 PUMP GP-PISTON & VANE
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 105-2151 | [1] | HEAD-PUMP | |
| 2. | 9S-8007 C | [1] | PLUG | |
| 3. | 9T-3867 | [1] | SPRING | |
| 4. | 9T-1710 | [1] | POPPET | |
| 5. | 9T-1636 | [1] | SEAT | |
| 6. | 9T-2017 | [2] | SPACER (12.2-MM THK) | |
| 7. | 005-8593 | [2] | SEAL-O-RING | |
| 8. | 9T-2011 | [1] | SHIM PACK | |
| 9. | 3P-8680 | [2] | CUP-BEARING | |
| 10. | 7T-9831 | [2] | CONE-BEARING | |
| 11. | 9T-2015 | [1] | HOUSING | |
| 12. | 9T-2014 | [2] | COVER | |
| 13. | 5P-0076 | [6] | BOLT-12 POINT HEAD (3/8-16X1.5-IN) | |
| 14. | 9T-1752 | [1] | GASKET | |
| 15. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 16. | 2M-9780 | [1] | SEAL-O-RING | |
| 17. | 8T-5089 | [2] | PIN-SPRING | |
| 18. | 7L-0688 | [4] | BOLT-SOCKET HEAD (10-24X1.2-IN) | |
| 19. | 228-0391 CY | [1] | VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR) | |
| 20. | 9T-2031 Y | [1] | ROTATING GP-PUMP | |
| 21. | 9T-2231 | [1] | SWASHPLATE | |
| 22. | 6E-6481 | [1] | SHAFT | |
| 23. | 002-3455 | [1] | RING-RETAINING | |
| 24. | 3E-6748 | [1] | SEAL-LIP TYPE | |
| 25. | 7T-9755 | [1] | CUP-BEARING | |
| 26. | 7T-9754 | [1] | CONE-BEARING | |
| 27. | 9T-2000 | [1] | KIT-SPACER | |
| (INCLUDES 12 SPACERS) | ||||
| 28. | 9T-2232 | [1] | PLATE-WAFER | |
| 29. | 9T-2001 | [1] | PIN | |
| 30. | 7T-9753 | [1] | CUP-BEARING | |
| 31. | 7T-9752 | [1] | CONE-BEARING | |
| 32. | 9T-2173 | [1] | SEAT | |
| 33. | 8J-8308 | [1] | PIN-ROLL | |
| 34. | 9T-2168 | [1] | SPRING | |
| 35. | 9T-2171 | [1] | SEAT | |
| 36. | 9T-2172 | [1] | PISTON | |
| 37. | 033-6028 | [1] | SEAL-O-RING | |
| 38. | 100-4230 | [1] | ROD-CONTROL | |
| 39. | 100-4231 | [1] | CONNECTOR | |
| 40. | 8F-9206 | [2] | SEAL-O-RING | |
| 41. | 9T-2002 | [1] | GASKET | |
| 42. | 5F-9144 | [1] | SEAL-O-RING | |
| 43. | 9T-2003 | [1] | RING | |
| 44. | 9S-2011 | [8] | SCREW-MACHINE (1/4-20X0.5-IN) | |
| 45. | 7J-0204 C | [1] | SEAL-O-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45620902
237-0292: PUMP GP-PISTON
237-0292 PUMP GP-PISTON -IMPLEMENT, STEERING, PILOT
S/N DHC1-4199
PART OF 235-6830 PUMP & MTG GP-IMPL & STEERING
S/N DHC1-4199
PART OF 235-6830 PUMP & MTG GP-IMPL & STEERING
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 261-0438 | [1] | KIT-BEARING (STEERING, IMPLEMENT PILOT) | |
| (INCLUDES BEARINGS) | ||||
| 2. | 1P-6872 | [1] | CUP-BEARING | |
| 3. | 109-1779 | [1] | CONE-BEARING | |
| 4. | 002-0754 | [1] | CUP-BEARING | |
| 5. | 031-1348 | [1] | CONE-BEARING | |
| 6. | 261-0434 | [1] | SHAFT-DRIVE | |
| 7. | 248-1353 | [1] | KIT-PUMP (STEERING, IMPLEMENT PILOT) | |
| (INCLUDES CYLINDER BLOCK, PISTON, RETAINING RING, PIN, WASHER & SPRING) | ||||
| 8. | 261-0437 | [1] | SWASHPLATE | |
| 9. | 248-1159 | [1] | PLATE-VALVE | |
| 10. | 248-1348 Y | [1] | VALVE GP-CONTROL (PISTON PUMP) | |
| 11. | 307-3049 J | [1] | PLUG AS | |
| 12. | 6J-2245 J | [1] | SEAL-O-RING | |
| 13. | 3J-7354 J | [6] | SEAL-O-RING | |
| 14. | 234-4173 J | [4] | SEAL-O-RING | |
| 15. | 3K-0360 J | [1] | SEAL-O-RING | |
| 16. | 2M-9780 J | [2] | SEAL-O-RING | |
| 17. | 261-4173 J | [1] | SEAL-LIP TYPE | |
| 18. | 6J-7855 | [1] | RING-RETAINING | |
| 19. | 6E-3283 M | [1] | LOCKNUT (M12X1.75-THD) | |
| 20. | 095-0915 | [2] | RING-RETAINING | |
| 21. | 398-7475 | [1] | COVER-PUMP | |
| 22. | 398-7481 | [1] | KIT-PISTON | |
| 23. | 398-7482 | [1] | KIT-PISTON | |
| (EACH PISTON KIT INCLUDES PISTON & RETAINING RINGS) | ||||
| 24. | 398-7483 | [2] | PIN | |
| AVAILABLE REPAIR KIT(S): | ||||
| 261-0431 | [1] | KIT-SEAL (STEERING, IMPLEMENT PILOT) | ||
| (INCLUDES RINGS & SEALS) | ||||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45620903
119-7698: PUMP GP-PISTON & VANE
119-7698 PUMP GP-PISTON & VANE -IMPLEMENT, STEERING, PILOT
S/N CXK1-2021
PART OF 118-1083 PUMP & MTG GP-IMPL & STEERING
S/N CXK1-2021
PART OF 118-1083 PUMP & MTG GP-IMPL & STEERING
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 120-0140 Y | [1] | PUMP GP-PISTON (STEERING & PILOT) | |
| 2. | 2M-8191 | [2] | RING-SNAP | |
| 3. | 6E-6477 Y | [1] | CARTRIDGE GP-VANE PUMP (IMPLEMENT) | |
| 4. | 120-0145 | [1] | SHAFT-PUMP | |
| 5. | 120-0146 | [1] | COVER-PUMP | |
| 6. | 2H-1142 | [1] | RING-RETAINING | |
| 7. | 6E-6480 | [1] | BEARING | |
| 8. | 6J-7854 | [2] | RING-SNAP | |
| 9. | 6E-6473 | [1] | COUPLING | |
| 10. | 9X-8887 | [4] | BOLT (3/4-10X3-IN) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45620904
9T-2031: ROTATING GP-PUMP
9T-2031 ROTATING GP-PUMP -STEERING, PILOT
S/N CXK1-2021
PART OF 120-0140 PUMP GP-PISTON
S/N CXK1-2021
PART OF 120-0140 PUMP GP-PISTON
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-3868 | [1] | KIT-PISTON (PUMP ROTATING GROUP) | |
| (INCLUDES PISTONS) | ||||
| 2. | 9T-3860 | [1] | PLATE | |
| 3. | 9T-3859 | [1] | WASHER (1.068X1.139X0.099-MM THK) | |
| 4. | 9T-3862 | [1] | RETAINER | |
| 5. | 9T-3857 | [3] | PIN | |
| 6. | 9T-3863 | [1] | BARREL | |
| 7. | 9T-3861 | [1] | WASHER (1.062X1.58X0.095-MM THK) | |
| 8. | 9T-3858 | [1] | SPRING | |
| 9. | 9T-3864 | [1] | WASHER (1.2X1.58X0.095-MM THK) | |
| 10. | 004-1683 | [1] | RING-SNAP | |
#SEBP45620905
289-8901: TANK & MTG GP-HYDRAULIC
289-8901 TANK & MTG GP-HYDRAULIC
S/N DHC1-2036; CXK1-1119
PART OF 289-8843, 289-8863, 289-8883 HYDRAULIC AR
S/N DHC1-2036; CXK1-1119
PART OF 289-8843, 289-8863, 289-8883 HYDRAULIC AR
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 246-2641 | [1] | PADLOCK GP | |
| 5P-8500 | KEY | |||
| 2. | 7T-8332 | [4] | MOUNTING | |
| 3. | 262-5654 Y | [1] | TANK GP-HYDRAULIC | |
| 4. | 289-9620 | [1] | PLATE AS | |
| 5. | 289-9621 | [1] | PLATE AS | |
| 6. | 320-0569 | [1] | PLATE | |
| 7. | 7X-7729 | [12] | WASHER (11X25X3-MM THK) | |
| 8. | 8F-6437 | [4] | WASHER (13.5X50.8X4.76-MM THK) | |
| 9. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 11. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 12. | 8T-4186 M | [8] | BOLT (M10X1.5X40-MM) | |
| 13. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| 15. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| 16. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45620906
289-8901: TANK & MTG GP-HYDRAULIC
289-8901 TANK & MTG GP-HYDRAULIC
S/N DHC2037-2088; CXK1120-1150
PART OF 289-8843, 289-8863 HYDRAULIC AR
S/N DHC2037-2088; CXK1120-1150
PART OF 289-8843, 289-8863 HYDRAULIC AR
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 246-2641 | [1] | PADLOCK GP | |
| 5P-8500 | [1] | KEY | ||
| 2. | 7T-8332 | [4] | MOUNTING | |
| 3. | 353-5606 CY | [1] | TANK GP-HYDRAULIC | |
| 4. | 289-9620 | [1] | PLATE AS | |
| 5. | 289-9621 | [1] | PLATE AS | |
| 6. | 320-0569 | [1] | PLATE | |
| 7. | 7X-7729 | [12] | WASHER (11X25X3-MM THK) | |
| 8. | 8F-6437 | [4] | WASHER (13.5X50.8X4.76-MM THK) | |
| 9. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 11. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 12. | 8T-4186 M | [8] | BOLT (M10X1.5X40-MM) | |
| 13. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| 15. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| 16. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45620907
289-8901: TANK & MTG GP-HYDRAULIC
289-8901 TANK & MTG GP-HYDRAULIC
S/N DHC2089-4199; CXK1151-2021
PART OF 289-8843, 289-8863 HYDRAULIC AR
S/N DHC2089-4199; CXK1151-2021
PART OF 289-8843, 289-8863 HYDRAULIC AR
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 246-2641 | [1] | PADLOCK GP | |
| 5P-8500 | [1] | KEY | ||
| 2. | 7T-8332 | [4] | MOUNTING | |
| 3. | 262-5654 CY | [1] | TANK GP-HYDRAULIC | |
| 4. | 289-9620 | [1] | PLATE AS | |
| 5. | 289-9621 | [1] | PLATE AS | |
| 6. | 320-0569 | [1] | PLATE | |
| 7. | 7X-7729 | [12] | WASHER (11X25X3-MM THK) | |
| 8. | 8F-6437 | [4] | WASHER (13.5X50.8X4.76-MM THK) | |
| 9. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 11. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 12. | 8T-4186 M | [8] | BOLT (M10X1.5X40-MM) | |
| 13. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| 15. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| 16. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45620908
262-5654: TANK GP-HYDRAULIC
262-5654 TANK GP-HYDRAULIC
S/N DHC1-2036; DHC2089-4199; CXK1-1119; CXK1151-2021
PART OF 289-8901 TANK & MTG GP-HYDRAULIC
S/N DHC1-2036; DHC2089-4199; CXK1-1119; CXK1151-2021
PART OF 289-8901 TANK & MTG GP-HYDRAULIC
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-8937 | [1] | CAP AS-FILLER (LOCKABLE) | |
| 2. | 206-8818 | [1] | STRAINER (HYDRAULIC OIL) | |
| 3. | 206-9546 | [1] | GASKET | |
| 4. | 153-2985 Y | [1] | GAUGE GP-SIGHT (HYDRAULIC OIL LEVEL) | |
| 5. | 255-0759 | [1] | SCREEN AS-SUCTION (FILTER) | |
| 030-4606 | [1] | SEAL-O-RING | ||
| 6. | 258-2829 | [1] | BREATHER (HYDRAULIC TANK) | |
| 7. | [1] | TANK AS-HYDRAULIC | ||
| 7A. | [1] | STRAINER (HYDRAULIC TANK RETURN) | ||
| 111-5719 | [1] | GASKET | ||
| 140-9211 | [1] | STRAINER AS (HYDRAULIC OIL) | ||
| 311-3940 | [1] | BASE | ||
| 8. | 262-5689 | [1] | STRAINER AS (HYDRAULIC TANK) | |
| 135-7940 | [1] | SEAL-O-RING | ||
| 9. | 300-1301 | [1] | COVER AS-HYDRAULIC TANK | |
| 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | ||
| 8T-6912 M | [1] | BOLT (M8X1.25X50-MM) | ||
| 299-7996 | [1] | PLATE | ||
| 299-7997 | [1] | SCREEN (HYDRAULIC TANK) | ||
| 299-7998 | [1] | PLATE AS | ||
| 10. | 8T-4224 | [14] | WASHER-HARD (8.8X16X2-MM THK) | |
| 11. | 8T-4908 M | [14] | BOLT (M8X1.25X25-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45620909
353-5606: TANK GP-HYDRAULIC
353-5606 TANK GP-HYDRAULIC
S/N DHC2037-2088; CXK1120-1150
PART OF 289-8901 TANK & MTG GP-HYDRAULIC
S/N DHC2037-2088; CXK1120-1150
PART OF 289-8901 TANK & MTG GP-HYDRAULIC
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-8937 | [1] | CAP AS-FILLER (LOCKABLE) | |
| 2. | 153-2985 Y | [1] | GAUGE GP-SIGHT (HYDRAULIC OIL LEVEL) | |
| 3. | 206-8818 | [1] | STRAINER (HYDRAULIC OIL) | |
| 4. | 206-9546 | [1] | GASKET | |
| 5. | 255-0759 | [1] | SCREEN AS-SUCTION (FILTER) | |
| 030-4606 | [1] | SEAL-O-RING | ||
| 6. | 258-2829 | [1] | BREATHER (HYDRAULIC TANK) | |
| 7. | 262-5689 | [1] | STRAINER AS (HYDRAULIC TANK) | |
| 135-7940 | [1] | SEAL-O-RING | ||
| 8. | 353-5603 | [1] | GASKET | |
| 9. | 357-7218 Y | [1] | COVER GP-HYDRAULIC TANK CAP | |
| 10. | 366-7847 | [1] | PLATE | |
| 11. | 8T-4224 | [28] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 8T-7329 M | [14] | BOLT (M8X1.25X55-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
