AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

308-9075 LINES GP-FUEL S/N C6E2314-UP PART OF 292-5306, 301-3356, 301-3357, 435-1694, 435-1696 ENGINE AR-PRIMARY AN ATTACHMENT 924H


FUEL SYSTEM
LINES GP-FUEL
PUMP GP-FUEL INJECTION

WHEEL LOADER 924H WHEEL LOADER JTM
 924H 924Hz Wheel Loader JTM00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP4564 924H JTM   (2007)

FUEL SYSTEM

LINES GP-FUEL
LINES GP-FUEL
289-8938 LINES GP-FUEL
LINES GP-FUEL
308-9075 LINES GP-FUEL
LINES GP-FUEL
308-9075 LINES GP-FUEL
LINES GP-FUEL
308-9075 LINES GP-FUEL
RAIL GP-FUEL
358-6634 RAIL GP-FUEL
 

#SEBP45640130
 

308-9075: LINES GP-FUEL

308-9075 LINES GP-FUEL
S/N C6E2314-UP
PART OF 292-5306, 301-3356, 301-3357, 435-1694, 435-1696 ENGINE AR-PRIMARY
AN ATTACHMENT
i03201908 SEBP4564
3089075 LINES GP-FUEL Parts scheme 3089075 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 924H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
2. 6I-0593 M [2] BOLT (M10X1.5X30-MM)  
4. 6I-0654 M [1] BOLT (M10X1.5X25-MM)  
5. 106-8916 M [1] BOLT (M6X16-MM)  
6. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
7. 215-9509 [1] FITTING (QUICK DISCONNECT, MALE)  
8. 286-2890 [2] WASHER  
9. 232-1115 [1] CLIP-PIPE  
10. 234-3063 C [3] CLIP  
11. 277-6165 [2] CONNECTION-FUEL  
12. 278-0314 [1] SPACER  
13. 295-4662 [1] TUBE-FUEL  
14. 311-1684 [1] TUBE  
15. 311-1952 [1] BRACKET AS  
15A. 232-1115 [4] CLIP-PIPE  
16. 287-6853 [1] BRACKET AS  
16A. 232-1115 [2] CLIP-PIPE  
17. 290-5735 [1] BRACKET AS  
17A. 278-0315 [1] CLIP-PIPE  
18. 293-8068 [1] TUBE-FUEL  
19. 309-0857 [1] TUBE  
20. 295-4670 [1] BOLT-SPECIAL (BANJO)  
21. 311-1666 [1] BRACKET  
22. 306-5432 [1] BRACKET  
23. 311-2262 [1] BRACKET AS  
23A. 232-1115 [2] CLIP-PIPE  
24. 331-3187 C [1] TUBE  
25. 311-2241 C [1] BRACKET AS  
25A. 232-1115 [7] CLIP-PIPE  
26. 308-9079 [1] BRACKET AS  
26A. 232-1115 [2] CLIP-PIPE  
27. 311-2232 C [1] BRACKET AS  
27A. 232-1115 [1] CLIP-PIPE  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION (LINE, LOW PRESSURE)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP45640131
 

276-8398: PUMP GP-FUEL INJECTION

276-8398 PUMP GP-FUEL INJECTION
S/N C6E1-UP
PART OF 303-2930, 315-7742 PUMP GP-FUEL INJECTION
AN ATTACHMENT
i02836928 SEBP4564
2768398 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 924H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-7100 [1] SEAL-O-RING  
2. 238-0120 [1] SENSOR GP-SPEED (SECONDARY, TIMING)  
3. 247-6019 [1] SEAL-O-RING  
4. 248-1066 [1] FITTING-FUEL  
5. 293-0249 [1] PUMP GP-FUEL TRANSFER  
6. 117-1385 [1] SEAL-O-RING  
7. 5A-3604 M [5] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
8. 6D-7889 [1] SEAL-O-RING  
9. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
  M   METRIC PART
 

#SEBP45640132
 

291-5919: PUMP GP-FUEL INJECTION

291-5919 PUMP GP-FUEL INJECTION
S/N C6E5433-UP
PART OF 303-2930, 315-7742 PUMP GP-FUEL INJECTION
AN ATTACHMENT
i03028701 SEBP4564
2915919 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 924H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-0172 [1] FITTING-FUEL  
2. 228-7100 [3] SEAL-O-RING  
3. 247-6019 [1] SEAL-O-RING  
4. 248-1066 [1] FITTING-FUEL  
5. 293-0249 [1] PUMP GP-FUEL TRANSFER  
6. 294-3031 [1] BOLT-SPECIAL  
7. 294-3032 [1] WASHER-SPECIAL  
8. 295-0189 [1] CONNECTOR AS  
9. 295-4801 M [1] NUT (M14X1.5-THD)  
10. 296-3542 [1] LOCKWASHER  
11. 117-1385 [1] SEAL-O-RING  
12. 5A-3604 M [5] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
13. 6D-7889 [1] SEAL-O-RING  
14. 8L-2779 [1] SEAL-O-RING  
15. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
16. 238-0120 [1] SENSOR GP-SPEED (SECONDARY, TIMING)  
  M   METRIC PART
 

#SEBP45640133
 

303-2930: PUMP GP-FUEL INJECTION

303-2930 PUMP GP-FUEL INJECTION
S/N C6E1-3159
PART OF 292-5306, 301-3356 ENGINE AR-PRIMARY
AN ATTACHMENT
i02836918 SEBP4564
3032930 PUMP GP-FUEL INJECTION Parts scheme 3032930 PUMP GP-FUEL INJECTION Parts scheme 3032930 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 924H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [6] BOLT (M8X1.25X20-MM)  
2. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
3. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
4. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
5. 6I-4374 M [2] BOLT (M8X1.25X60-MM)  
6. 6I-4793 M [1] BOLT (M8X1.25X50-MM)  
7. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
8. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
9. 155-0576 [8] MOUNT-ISOLATION  
10. 216-9752 [2] WASHER  
11. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
12. 225-8524 [1] BOLT-SPECIAL  
13. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
14. 232-3149 [6] WASHER (8.35X16.85X1.55-MM THK)  
15. 217-9039 [1] STRAP-CABLE  
16. 241-4291 [4] SCREW  
17. 308-8426 [1] RAIL AS-FUEL  
18. 268-6677 [1] BRACKET AS  
18A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
19. 268-6678 [1] BRACKET AS  
19A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
20. 276-8398 Y [1] PUMP GP-FUEL INJECTION  
21. 278-5168 [6] CLAMP-INJECTOR  
22. 278-5170 [6] BOLT  
23. 278-5180 [2] CLIP  
24. 278-5201 [2] CONNECTION  
25. 278-5202 [2] SEAL-O-RING  
26. 278-5203 [4] SPACER  
29. 278-5225 [1] KIT-SENSOR (ENGINE OIL PRESSURE)  
29A. 278-5226 [1] SEAL-O-RING  
30. 311-3858 [1] KIT-SENSOR (ENGINE SPEED)  
30A. 274-1639 [1] SEAL  
31. 278-5272 [1] KIT-SENSOR (INTAKE AIR TEMPERATURE)  
31A. 278-5226 [1] SEAL-O-RING  
32. 278-5273 [1] KIT-SENSOR (AIR PRESSURE)  
32A. 199-9252 [1] SEAL-O-RING  
33. 278-5307 [1] KIT-SENSOR (COOLANT TEMPERATURE)  
33A. 199-9267 [1] SEAL-O-RING  
34. 311-6342 [1] SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)  
34A. 309-8006 [1] WASHER  
35. 280-1889 [4] CLAMP  
36. 280-1890 [4] CLAMP  
37. 280-1891 [4] ISOLATOR  
38. 310-7918 [1] BRACKET-SUPPORT  
39. 286-3683 [1] CONTROL GP-UNPROGRAMMED (ENGINE)  
40. 287-6838 [1] BRACKET  
41. 287-6839 [2] BOLT  
42. 290-3911 [1] LINE-FUEL INJECTION (CYL NO. 1)  
43. 290-3912 [1] LINE-FUEL INJECTION (CYL NO. 2)  
44. 290-3913 [1] LINE-FUEL INJECTION (CYL NO. 3)  
45. 290-3914 [1] LINE-FUEL INJECTION (CYL NO. 4)  
46. 290-3915 [1] LINE-FUEL INJECTION (CYL NO. 5)  
47. 290-3916 [1] LINE-FUEL INJECTION (CYL NO. 6)  
48. 290-3910 [1] LINE-FUEL INJECTION  
49. 292-0848 [1] TUBE  
50. 292-3780 Y [6] INJECTOR GP-FUEL  
51. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
52. 300-2940 [1] BRACKET  
53. 293-9901 [1] BRACKET  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION  
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP45640134
 

303-2930: PUMP GP-FUEL INJECTION

303-2930 PUMP GP-FUEL INJECTION
S/N C6E3160-5432
PART OF 292-5306, 301-3356 ENGINE AR-PRIMARY
AN ATTACHMENT
i02994801 SEBP4564
3032930 PUMP GP-FUEL INJECTION Parts scheme 3032930 PUMP GP-FUEL INJECTION Parts scheme 3032930 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 924H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [6] BOLT (M8X1.25X20-MM)  
2. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
3. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
4. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
5. 6I-4374 M [2] BOLT (M8X1.25X60-MM)  
6. 6I-4793 M [1] BOLT (M8X1.25X50-MM)  
7. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
8. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
9. 155-0576 [8] MOUNT-ISOLATION  
10. 320-2391 [2] WASHER  
11. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
12. 225-8524 [1] BOLT-SPECIAL  
13. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
14. 232-3149 [6] WASHER (8.35X16.85X1.55-MM THK)  
15. 217-9039 [1] STRAP-CABLE  
16. 241-4291 [4] SCREW  
17. 311-6632 C [1] RAIL AS-FUEL  
18. 268-6677 [1] BRACKET AS  
18A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
19. 268-6678 [1] BRACKET AS  
19A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
20. 276-8398 Y [1] PUMP GP-FUEL INJECTION  
21. 278-5168 [6] CLAMP-INJECTOR  
22. 278-5170 [6] BOLT  
23. 278-5180 [2] CLIP  
24. 278-5201 [2] CONNECTION  
25. 278-5202 [2] SEAL-O-RING  
26. 278-5203 [4] SPACER  
29. 278-5225 [1] KIT-SENSOR (ENGINE OIL PRESSURE)  
29A. 278-5226 [1] SEAL-O-RING  
30. 311-3858 C [1] KIT-SENSOR (ENGINE SPEED)  
30A. 274-1639 [1] SEAL  
31. 278-5272 [1] KIT-SENSOR (INTAKE AIR TEMPERATURE)  
31A. 278-5226 [1] SEAL-O-RING  
32. 278-5273 [1] KIT-SENSOR (AIR PRESSURE)  
32A. 199-9252 [1] SEAL-O-RING  
33. 278-5307 [1] KIT-SENSOR (COOLANT TEMPERATURE)  
33A. 199-9267 [1] SEAL-O-RING  
34. 311-6342 C [1] SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)  
34A. 309-8006 [1] WASHER  
35. 280-1889 [4] CLAMP  
36. 280-1890 [4] CLAMP  
37. 280-1891 [4] ISOLATOR  
38. 310-7918 [1] BRACKET-SUPPORT  
39. 286-3683 [1] CONTROL GP-UNPROGRAMMED (ENGINE)  
40. 287-6838 [1] BRACKET  
41. 287-6839 [2] BOLT  
42. 290-3911 [1] LINE-FUEL INJECTION (CYL NO. 1)  
43. 290-3912 [1] LINE-FUEL INJECTION (CYL NO. 2)  
44. 290-3913 [1] LINE-FUEL INJECTION (CYL NO. 3)  
45. 290-3914 [1] LINE-FUEL INJECTION (CYL NO. 4)  
46. 290-3915 [1] LINE-FUEL INJECTION (CYL NO. 5)  
47. 290-3916 [1] LINE-FUEL INJECTION (CYL NO. 6)  
48. 290-3910 [1] LINE-FUEL INJECTION  
49. 321-1270 [1] TUBE-OIL  
50. 306-9380 CY [6] INJECTOR GP-FUEL  
51. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
52. 300-2940 [1] BRACKET  
53. 293-9901 [1] BRACKET  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP45640135
 

303-2930: PUMP GP-FUEL INJECTION

303-2930 PUMP GP-FUEL INJECTION
S/N C6E5433-6804
PART OF 292-5306, 301-3356 ENGINE AR-PRIMARY
AN ATTACHMENT
i03075309 SEBP4564
3032930 PUMP GP-FUEL INJECTION Parts scheme 3032930 PUMP GP-FUEL INJECTION Parts scheme 3032930 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 924H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [6] BOLT (M8X1.25X20-MM)  
2. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
3. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
4. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
5. 6I-4374 M [2] BOLT (M8X1.25X60-MM)  
6. 6I-4793 M [1] BOLT (M8X1.25X50-MM)  
7. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
8. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
9. 155-0576 [8] MOUNT-ISOLATION  
10. 320-2391 [2] WASHER  
11. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
12. 225-8524 [1] BOLT-SPECIAL  
13. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
14. 232-3149 C [3] WASHER (8.35X16.85X1.55-MM THK)  
15. 217-9039 [1] STRAP-CABLE  
16. 241-4291 [4] SCREW  
17. 311-6632 C [1] RAIL AS-FUEL  
18. 268-6677 [1] BRACKET AS  
18A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
19. 268-6678 [1] BRACKET AS  
19A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
20. 291-5919 CY [1] PUMP GP-FUEL INJECTION  
21. 278-5168 [6] CLAMP-INJECTOR  
22. 278-5170 [6] BOLT  
23. 278-5180 [2] CLIP  
24. 278-5201 [2] CONNECTION  
25. 278-5202 [2] SEAL-O-RING  
26. 278-5203 [4] SPACER  
29. 278-5225 [1] KIT-SENSOR (ENGINE OIL PRESSURE)  
29A. 278-5226 [1] SEAL-O-RING  
30. 311-3858 C [1] KIT-SENSOR (ENGINE SPEED)  
30A. 274-1639 [1] SEAL  
31. 278-5272 [1] KIT-SENSOR (INTAKE AIR TEMPERATURE)  
31A. 278-5226 [1] SEAL-O-RING  
32. 278-5273 [1] KIT-SENSOR (AIR PRESSURE)  
32A. 199-9252 [1] SEAL-O-RING  
33. 278-5307 [1] KIT-SENSOR (COOLANT TEMPERATURE)  
33A. 199-9267 [1] SEAL-O-RING  
34. 311-6342 C [1] SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)  
34A. 309-8006 [1] WASHER  
35. 280-1889 [4] CLAMP  
36. 280-1890 [4] CLAMP  
37. 280-1891 [4] ISOLATOR  
38. 310-7918 [1] BRACKET-SUPPORT  
39. 286-3683 [1] CONTROL GP-UNPROGRAMMED (ENGINE)  
40. 287-6838 [1] BRACKET  
41. 287-6839 [2] BOLT  
42. 290-3911 [1] LINE-FUEL INJECTION (CYL NO. 1)  
43. 290-3912 [1] LINE-FUEL INJECTION (CYL NO. 2)  
44. 290-3913 [1] LINE-FUEL INJECTION (CYL NO. 3)  
45. 290-3914 [1] LINE-FUEL INJECTION (CYL NO. 4)  
46. 290-3915 [1] LINE-FUEL INJECTION (CYL NO. 5)  
47. 290-3916 [1] LINE-FUEL INJECTION (CYL NO. 6)  
48. 290-3910 [1] LINE-FUEL INJECTION  
49. 321-1270 [1] TUBE-OIL  
50. 306-9380 CY [6] INJECTOR GP-FUEL  
51. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
52. 300-2940 [1] BRACKET  
53. 293-9901 [1] BRACKET  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP45640136
 

303-2930: PUMP GP-FUEL INJECTION

303-2930 PUMP GP-FUEL INJECTION
S/N C6E6805-22184
PART OF 292-5306, 301-3356 ENGINE AR-PRIMARY
AN ATTACHMENT
i03158463 SEBP4564
3032930 PUMP GP-FUEL INJECTION Parts scheme 3032930 PUMP GP-FUEL INJECTION Parts scheme 3032930 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 924H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [6] BOLT (M8X1.25X20-MM)  
2. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
3. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
4. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
5. 6I-4374 M [2] BOLT (M8X1.25X60-MM)  
6. 6I-4793 M [1] BOLT (M8X1.25X50-MM)  
7. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
8. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
9. 155-0576 [8] MOUNT-ISOLATION  
10. 160-0162 C [2] WASHER  
11. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
12. 225-8524 [1] BOLT-SPECIAL  
13. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
14. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
15. 217-9039 [1] STRAP-CABLE  
16. 241-4291 [4] SCREW  
17. 318-2396 [1] RAIL AS-FUEL  
17A. 305-5291 [1] VALVE AS-RELIEF (FUEL RAIL)  
17B. 228-7102 [1] SEAL-O-RING  
18. 268-6677 [1] BRACKET AS  
18A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
19. 268-6678 [1] BRACKET AS  
19A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
20. 317-8021 Y [1] PUMP GP-FUEL INJECTION  
21. 278-5168 [6] CLAMP-INJECTOR  
22. 278-5170 [6] BOLT  
23. 278-5180 [2] CLIP  
24. 278-5201 [2] CONNECTION  
25. 278-5202 [2] SEAL-O-RING  
26. 278-5203 [4] SPACER  
29. 278-5225 [1] KIT-SENSOR (ENGINE OIL PRESSURE)  
29A. 278-5226 [1] SEAL-O-RING  
30. 311-3858 [1] KIT-SENSOR (ENGINE SPEED)  
30A. 274-1639 [1] SEAL  
31. 278-5272 [1] KIT-SENSOR (INTAKE AIR TEMPERATURE)  
31A. 278-5226 [1] SEAL-O-RING  
32. 278-5273 [1] KIT-SENSOR (AIR PRESSURE)  
32A. 199-9252 [1] SEAL-O-RING  
33. 278-5307 [1] KIT-SENSOR (COOLANT TEMPERATURE)  
33A. 199-9267 [1] SEAL-O-RING  
34. 311-6342 [1] SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)  
34A. 309-8006 [1] WASHER  
35. 330-3685 C [4] CLAMP  
36. 330-3687 C [4] CLAMP  
37. 330-5467 CD [4] ISOLATOR  
38. 310-7918 [1] BRACKET-SUPPORT  
39. 331-7539 [1] CONTROL GP-UNPROGRAMMED (ENGINE)  
40. 287-6838 [1] BRACKET  
41. 287-6839 [2] BOLT  
42. 336-8174 [1] LINE-FUEL INJECTION (CYL NO. 1)(CYL NO. 1)  
43. 336-8175 [1] LINE-FUEL INJECTION (CYL NO. 2)(CYL NO. 2)  
44. 336-8176 [1] LINE-FUEL INJECTION (CYL NO. 3)(CYL NO. 3)  
45. 336-8177 [1] LINE-FUEL INJECTION (CYL NO. 4)(CYL NO. 4)  
46. 336-8178 [1] LINE-FUEL INJECTION (CYL NO. 5)(CYL NO. 5)  
47. 336-8179 [1] LINE-FUEL INJECTION (CYL NO. 6)(CYL NO. 6)  
48. 336-8180 [1] LINE-FUEL INJECTION  
49. 321-1270 [1] TUBE-OIL  
50. 321-3600 CY [6] INJECTOR GP-FUEL  
51. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
52. 300-2940 [1] BRACKET  
53. 293-9901 [1] BRACKET  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP45640137
 

303-2930: PUMP GP-FUEL INJECTION

303-2930 PUMP GP-FUEL INJECTION
S/N C6E6805-22184
PART OF 301-3356, 435-1696 ENGINE AR-PRIMARY
AN ATTACHMENT
i03983117 SEBP4564
3032930 PUMP GP-FUEL INJECTION Parts scheme 3032930 PUMP GP-FUEL INJECTION Parts scheme 3032930 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 924H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [6] BOLT (M8X1.25X20-MM)  
2. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
3. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
4. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
5. 6I-4374 M [2] BOLT (M8X1.25X60-MM)  
6. 6I-4793 M [1] BOLT (M8X1.25X50-MM)  
7. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
8. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
9. 155-0576 [8] MOUNT-ISOLATION  
10. 160-0162 [2] WASHER  
11. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
12. 225-8524 [1] BOLT-SPECIAL  
13. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
14. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
15. 217-9039 [1] STRAP-CABLE  
16. 241-4291 [4] SCREW  
17. 318-2396 [1] RAIL AS-FUEL  
17A. 305-5291 [1] VALVE AS-RELIEF (FUEL RAIL)  
18. 268-6677 [1] BRACKET AS  
18A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
19. 268-6678 [1] BRACKET AS  
19A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
20. 351-0973 CY [1] PUMP GP-FUEL INJECTION  
21. 278-5168 [6] CLAMP-INJECTOR  
22. 278-5170 [6] BOLT  
23. 278-5180 [2] CLIP  
24. 278-5201 [2] CONNECTION  
25. 278-5202 [2] SEAL-O-RING  
26. 278-5203 [4] SPACER  
29. 278-5225 [1] KIT-SENSOR (ENGINE OIL PRESSURE)  
29A. 199-9267 [1] SEAL-O-RING  
30. 311-3858 [1] KIT-SENSOR (ENGINE SPEED)  
30A. 274-1639 [1] SEAL  
  238-0120 [1] SENSOR GP-SPEED  
31. 278-5272 [1] KIT-SENSOR (INTAKE AIR TEMPERATURE)  
31A. 278-5226 [1] SEAL-O-RING  
32. 278-5273 [1] KIT-SENSOR (AIR PRESSURE)  
32A. 199-9252 [1] SEAL-O-RING  
33. 278-5307 [1] KIT-SENSOR (COOLANT TEMPERATURE)  
33A. 199-9267 [1] SEAL-O-RING  
34. 311-6342 [1] SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)  
34A. 309-8006 [1] WASHER  
35. 330-3685 [4] CLAMP  
36. 330-3687 [4] CLAMP  
37. 330-5467 D [4] ISOLATOR  
38. 310-7918 [1] BRACKET-SUPPORT  
39. 331-7539 [1] CONTROL GP-UNPROGRAMMED (ENGINE)  
40. 287-6838 [1] BRACKET  
41. 287-6839 [2] BOLT  
42. 336-8174 [1] LINE-FUEL INJECTION (CYL NO. 1)  
43. 336-8175 [1] LINE-FUEL INJECTION (CYL NO. 2)  
44. 336-8176 [1] LINE-FUEL INJECTION (CYL NO. 3)  
45. 336-8177 [1] LINE-FUEL INJECTION (CYL NO. 4)  
46. 336-8178 [1] LINE-FUEL INJECTION (CYL NO. 5)  
47. 336-8179 [1] LINE-FUEL INJECTION (CYL NO. 6)  
48. 336-8180 [1] LINE-FUEL INJECTION  
49. 321-1270 [1] TUBE-OIL  
50. 321-3600 Y [6] INJECTOR GP-FUEL  
51. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
52. 300-2940 [1] BRACKET  
53. 293-9901 [1] BRACKET  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP45640138
 

303-2930: PUMP GP-FUEL INJECTION

303-2930 PUMP GP-FUEL INJECTION
S/N C6E22185-UP
PART OF 301-3356, 435-1696 ENGINE AR-PRIMARY
AN ATTACHMENT
i04505615 SEBP4564
3032930 PUMP GP-FUEL INJECTION Parts scheme 3032930 PUMP GP-FUEL INJECTION Parts scheme 3032930 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 924H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [6] BOLT (M8X1.25X20-MM)  
2. 6I-0254 CM [3] BOLT (M8X1.25X30-MM)  
3. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
4. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
6. 6I-4793 CM [3] BOLT (M8X1.25X50-MM)  
7. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
8. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
9. 155-0576 [8] MOUNT-ISOLATION  
10. 346-0007 [2] WASHER  
11. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
12. 346-0006 [1] BOLT-SPECIAL  
13. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
14. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
17. 438-3416 C [1] RAIL AS-FUEL  
17A. 416-7101 [1] VALVE AS-RELIEF (FUEL RAIL)  
  228-7102 [1] SEAL-O-RING  
18. 268-6677 [1] BRACKET AS  
18A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
19. 268-6678 [1] BRACKET AS  
19A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
20. 317-8021 CY [1] PUMP GP-FUEL INJECTION  
21. 278-5168 [6] CLAMP-INJECTOR  
22. 278-5170 [6] BOLT  
23. 278-5180 [2] CLIP  
24. 278-5201 [2] CONNECTION  
25. 228-7100 C [2] SEAL-O-RING  
26. 278-5203 [4] SPACER  
29. 278-5225 [1] KIT-SENSOR (ENGINE OIL PRESSURE)  
29A. 199-9267 [1] SEAL-O-RING  
30. 311-3858 [1] KIT-SENSOR (ENGINE SPEED)  
30A. 274-1639 [1] SEAL  
  238-0120 [1] SENSOR GP-SPEED  
31. 278-5272 [1] KIT-SENSOR (INTAKE AIR TEMPERATURE)  
31A. 278-5226 [1] SEAL-O-RING  
32. 278-5273 [1] KIT-SENSOR (AIR PRESSURE)  
32A. 199-9252 [1] SEAL-O-RING  
33. 278-5307 [1] KIT-SENSOR (COOLANT TEMPERATURE)  
33A. 199-9267 [1] SEAL-O-RING  
34. 311-6342 [1] SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)  
34A. 309-8006 [1] WASHER  
35. 330-3685 C [3] CLAMP  
36. 330-3687 C [3] CLAMP  
37. 330-5467 C [3] ISOLATOR  
38. 310-7918 [1] BRACKET-SUPPORT  
39. 331-7539 [1] CONTROL GP-UNPROGRAMMED (ENGINE)  
40. 287-6838 [1] BRACKET  
41. 287-6839 [2] BOLT  
42. 336-8174 [1] LINE-FUEL INJECTION (CYL NO. 1)  
43. 336-8175 [1] LINE-FUEL INJECTION (CYL NO. 2)  
44. 336-8176 [1] LINE-FUEL INJECTION (CYL NO. 3)  
45. 336-8177 [1] LINE-FUEL INJECTION (CYL NO. 4)  
46. 336-8178 [1] LINE-FUEL INJECTION (CYL NO. 5)  
47. 336-8179 [1] LINE-FUEL INJECTION (CYL NO. 6)  
48. 355-1582 C [1] TUBE AS  
49. 321-1270 [1] TUBE-OIL  
50. 321-3600 Y [6] INJECTOR GP-FUEL  
51. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
53. 293-9901 [1] BRACKET  
54. 1N-3361 C [1] SPACER  
55. 280-1892 C [3] BOLT  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP45640139
 

315-7742: PUMP GP-FUEL INJECTION

315-7742 PUMP GP-FUEL INJECTION
S/N C6E1-3159
PART OF 301-3357 ENGINE AR-PRIMARY
AN ATTACHMENT
i02809237 SEBP4564
3157742 PUMP GP-FUEL INJECTION Parts scheme 3157742 PUMP GP-FUEL INJECTION Parts scheme 3157742 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 924H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [2] BOLT (M8X1.25X20-MM)  
2. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
3. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
4. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
5. 6I-4374 M [2] BOLT (M8X1.25X60-MM)  
6. 6I-4793 M [1] BOLT (M8X1.25X50-MM)  
7. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
8. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
9. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
10. 155-0576 [8] MOUNT-ISOLATION  
11. 216-9752 [2] WASHER  
12. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
13. 217-9039 [1] STRAP-CABLE  
14. 225-8524 [1] BOLT-SPECIAL  
15. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
16. 232-3149 [6] WASHER (8.35X16.85X1.55-MM THK)  
17. 241-4291 [4] SCREW  
18. 268-6677 [1] BRACKET AS  
  260-3718 [1] BRACKET  
18A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
19. 268-6678 [1] BRACKET AS  
  260-3719 [1] BRACKET  
19A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
20. 276-8398 Y [1] PUMP GP-FUEL INJECTION  
21. 278-5168 [6] CLAMP-INJECTOR  
22. 278-5170 [6] BOLT  
23. 278-5180 [2] CLIP  
24. 278-5201 [2] CONNECTION  
25. 278-5202 [2] SEAL-O-RING  
26. 278-5203 [4] SPACER  
27. 278-5225 [1] KIT-SENSOR (ENGINE OIL PRESSURE)  
27A. 199-9267 [1] SEAL-O-RING  
28. 278-5272 [1] KIT-SENSOR (AIR TEMPERATURE)  
28A. 278-5226 [1] SEAL-O-RING  
29. 278-5273 [1] KIT-SENSOR (AIR PRESSURE)  
29A. 199-9252 [1] SEAL-O-RING  
30. 278-5307 [1] KIT-SENSOR (COOLANT TEMPERATURE)  
30A. 199-9267 [1] SEAL-O-RING  
31. 280-1889 [4] CLAMP  
32. 280-1890 [4] CLAMP  
33. 280-1891 [4] ISOLATOR  
34. 286-3683 [1] CONTROL GP-UNPROGRAMMED (ENGINE)  
35. 287-6838 [1] BRACKET  
36. 287-6839 [6] BOLT  
37. 290-3910 [1] LINE-FUEL INJECTION  
38. 290-3911 [1] LINE-FUEL INJECTION (CYL NO. 1)  
39. 290-3912 [1] LINE-FUEL INJECTION (CYL NO. 2)  
40. 290-3913 [1] LINE-FUEL INJECTION (CYL NO. 3)  
41. 290-3914 [1] LINE-FUEL INJECTION (CYL NO. 4)  
42. 290-3915 [1] LINE-FUEL INJECTION (CYL NO. 5)  
43. 290-3916 [1] LINE-FUEL INJECTION (CYL NO. 6)  
44. 292-0848 [1] TUBE  
45. 292-3780 Y [6] INJECTOR GP-FUEL  
46. 293-9901 [1] BRACKET  
47. 300-2940 [1] BRACKET  
48. 308-8426 [1] RAIL AS-FUEL  
49. 310-7918 [1] BRACKET-SUPPORT  
50. 311-3858 [1] KIT-SENSOR (ENGINE SPEED)  
50A. 274-1639 [1] SEAL  
51. 311-6342 [1] SENSOR AS-PRESSURE (FUEL)  
51A. 309-8006 [1] WASHER  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION (LINE, LOW PRESSURE)  
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Disassembly and Assembly
Fuel Manifold (Rail) - Remove and Install
C6.6 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 924H :

LINES GP-FUEL
308-9075 LINES GP-FUEL
LINES GP-FUEL
308-9075 LINES GP-FUEL
LINES GP-FUEL
289-8938 LINES GP-FUEL
INJECTOR GP-FUEL
321-3600 INJECTOR GP-FUEL
INJECTOR GP-FUEL
306-9380 INJECTOR GP-FUEL
INJECTOR GP-FUEL
292-3780 INJECTOR GP-FUEL
FILTER GP-SECONDARY FUEL
280-1394 FILTER GP-SECONDARY FUEL
TURBOCHARGER GP
331-8936 TURBOCHARGER GP
PUMP GP-FUEL INJECTION
276-8398 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
291-5919 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
303-2930 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
303-2930 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
303-2930 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
303-2930 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
303-2930 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
303-2930 PUMP GP-FUEL INJECTION

Truck sale:

Caterpillar 924H
 
Caterpillar 924H
- Wheel Loaders
FINNING CANADA
Caterpillar 924H, Wheel Loaders, Construction
47,733 
Caterpillar 924H, Wheel Loaders, Construction
- Wheel Loaders
TOROMONT CAT
 
 
Caterpillar 924H, Wheel Loaders, Construction


 
 
Caterpillar 924 H, Wheel Loaders, Construction


 
30,000 
Caterpillar 924H, Wheel Loaders, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.