ELECTRICAL AND STARTING SYSTEM
SWITCH GPWIRING GP
POWER TRAIN
AXLE GPELECTRICAL AND STARTING SYSTEM
SWITCH GP
#SEBP45660200
258-4115: WIRING GP-ENGINE
For full view, you need register
Parts for your 262C SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [2] | STRAP-CABLE | |
| 2. | 178-3620 C | [1] | STRAP-DUAL CLAMP | |
| 3. | 191-8303 Y | [1] | SENSOR GP-SPEED (ENGINE) | |
| 4. | 206-1345 | [1] | STRAP-CABLE | |
| 5. | 238-0112 | [1] | SENSOR GP-TEMPERATURE (ENGINE COOLANT) | |
| 6. | 258-4116 | [1] | HARNESS AS-ENGINE | |
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 271-5604 | [17] | PIN-CONNECTOR (20-GA) | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [8] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 169-0705 | [7] | SEAL | ||
| 176-1477 | [1] | PLUG AS (2-PIN) | ||
| 176-1522 | [2] | SEAL | ||
| 180-9340 | [10] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 211-5358 E | CONDUIT-FLEXIBLE (134-CM) | |||
| 8T-8737 | [12] | PLUG-SEAL | ||
| 8T-8799 | [1] | BOOT (RED) | ||
| 9X-1054 | [2] | PLUG AS-CONNECTOR (4-PIN) | ||
| 107-3136 | [4] | PLUG-SEAL | ||
| 9X-3401 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 186-3735 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 186-3736 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 107-3135 | [2] | TERMINAL (16-GA TO 20-GA) | ||
| 9X-1055 | [4] | TERMINAL-RECEPTACLE (12-GA) | ||
| 9X-1056 | [1] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 100-5041 | [3] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 030-1712 | [1] | TERMINAL-RING (2-GA, 1/4-IN SCREW) | ||
| 9G-4336 | [1] | TERMINAL-RING (4-GA, 3/8-IN SCREW) | ||
| 2L-8065 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 5P-1478 | [1] | TERMINAL-FORK (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 7. | 274-3774 BC | [2] | CAP-CONNECTOR | |
| 8. | 115-1615 | [1] | RELAY AS (12-VOLT)(START) | |
| 8A. | 115-1615 | [1] | RELAY AS (12-VOLT)(COLD START) | |
| 9. | 117-1385 | [1] | SEAL-O-RING | |
| 10. | 132-5789 | [4] | CLIP (LADDER) | |
| 11. | 3S-2093 C | [10] | STRAP-CABLE | |
| 12. | 4P-7428 | [1] | CLIP (LADDER) | |
| 13. | 4P-7429 | [1] | CLIP (LADDER) | |
| 14. | 4P-7581 C | [3] | CLIP (LADDER) | |
| 15. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 16. | 6V-7357 CM | [1] | BOLT (M6X1X25-MM) | |
| 17. | 6V-9028 | [1] | SEAL-O-RING | |
| 18. | 7X-2548 M | [1] | BOLT (M12X1.75X16-MM) | |
| 19. | 8T-4171 CM | [1] | BOLT (M6X1X12-MM) | |
| 20. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 21. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 22. | 8T-4224 C | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 23. | 8T-4908 CM | [1] | BOLT (M8X1.25X25-MM) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45660201
258-4192: WIRING GP-ENGINE
258-4192 WIRING GP-ENGINE -BATTERY
S/N MST1-UP
PART OF 258-2445, 295-7118 INSTALLATION AR-ENGINE
S/N MST1-UP
PART OF 258-2445, 295-7118 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 262C SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [5] | STRAP-CABLE | |
| 2. | 178-3620 | [4] | STRAP-DUAL CLAMP | |
| 3. | 200-6345 | [2] | SADDLE-MOUNTING (DUAL SWIVEL) | |
| 4. | 258-4188 | [1] | CABLE AS-BATTERY (NEGATIVE) | |
| 3S-2093 | [1] | STRAP-CABLE | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 9X-3410 | [1] | COVER-TERMINAL | ||
| 9S-5755 | [1] | TERMINAL AS (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 274-9183 | [1] | TERMINAL-RING (00-GA, 1/2-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(141-CM) | |||
| 5. | 258-4189 | [1] | CABLE AS-BATTERY (POSITIVE) | |
| 216-7790 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 283-3436 | [1] | COVER-TERMINAL | ||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 159-8049 E | CABLE (00-GA, RED)(87-CM) | |||
| 6. | 8X-5489 | [1] | SLEEVE | |
| 7. | 7P-1695 | [1] | WASHER (10.5X19X3-MM THK) | |
| 8. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP45660202
336-0913: WIRING GP-GRADE CONTROL
For full view, you need register
Parts for your 262C SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 292-4554 | [1] | HARNESS AS-CONTROL (ACCUGRADE) | ||
| 228-3323 | [1] | CLIP-SPRING | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECPTACLE AS & WEDGE) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | ||
| 7R-3029 | [1] | CAP-DUST | ||
| 4P-7581 | [3] | CLIP (LADDER) | ||
| 130-5300 | [1] | CLIP | ||
| 132-5789 | [1] | CLIP (LADDER) | ||
| 348-7068 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM, RH) | ||
| 348-7069 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM, RH) | ||
| 237-7552 | [3] | FILM-WARNING (LASER TRANSMITTER) | ||
| 3L-8187 | [4] | LOCKWASHER | ||
| 5C-7261 M | [2] | NUT (M8X1.25-THD) | ||
| 132-8487 | [1] | NUT-RING | ||
| 292-4553 | [1] | PLATE | ||
| 103-6262 | [4] | SCREW-MACHINE (4-40X0.63-IN) | ||
| 7K-1181 | [11] | STRAP-CABLE | ||
| 177-2215 | [16] | STRAP-DUAL CLAMP | ||
| 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP45660203
349-3670: WIRING GP-HEATER
349-3670 WIRING GP-HEATER
S/N MST3521-UP
PART OF 258-4250 HEATER AR-CAB
AN ATTACHMENT
S/N MST3521-UP
PART OF 258-4250 HEATER AR-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 262C SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 348-4172 | [1] | HARNESS AS-HEATER & AIR COND | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [13] | PLUG-SEAL | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 186-3736 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [10] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 2. | 3S-2093 | [8] | STRAP-CABLE | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP45660204
258-4107: WIRING GP-MACHINE
For full view, you need register
Parts for your 262C SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [2] | STRAP-CABLE | |
| 2. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| 3. | 300-9546 | [1] | ALARM AS-BACKUP | |
| 4. | 161-3357 B | [1] | SPACER (12X20X10-MM THK) | |
| 5. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 6. | 178-3620 | [12] | STRAP-DUAL CLAMP | |
| 7. | 206-1345 | [1] | STRAP-CABLE | |
| 8. | 258-4106 Y | [1] | HARNESS AS-REAR (DOOR) | |
| 9. | 258-4108 Y | [1] | HARNESS AS-CHASSIS | |
| 10. | 258-4179 | [1] | RAIL-MOUNTING | |
| 11. | 268-4071 Y | [2] | LAMP GP-FLOOD (12-VOLT, 4.7-AMPERE) | |
| 12. | 132-5789 | [1] | CLIP (LADDER) | |
| 13. | 156-6175 | [1] | CLIP (LADDER) | |
| 14. | 266-3314 M | [1] | BOLT-FLANGE HEAD (M6X1X20.5-MM) | |
| 15. | 102-8802 B | [1] | KIT-RECEPTACLE (2-PIN) | |
| 16. | 102-8803 B | [1] | KIT-RECEPTACLE (3-PIN) | |
| 17. | 102-8804 B | [1] | KIT-RECEPTACLE (4-PIN) | |
| 18. | 102-8805 B | [2] | KIT-RECEPTACLE (6-PIN) | |
| 19. | 102-8806 B | [1] | KIT-RECEPTACLE (8-PIN) | |
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 20. | 3S-2093 | [24] | STRAP-CABLE | |
| 21. | 4P-7581 | [3] | CLIP (LADDER) | |
| 22. | 4P-8134 | [1] | CLIP (LADDER) | |
| 23. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 24. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 25. | 7X-2533 M | [2] | BOLT (M6X1X35-MM) | |
| 26. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 28. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 29. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 30. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 31. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 32. | 8T-8737 B | [29] | PLUG-SEAL | |
| 33. | 310-0657 | [1] | PLATE | |
| 34. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45660205
258-4107: WIRING GP-MACHINE
For full view, you need register
Parts for your 262C SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [2] | STRAP-CABLE | |
| 2. | 189-3158 | [1] | SUPPRESSOR-ARC | |
| 3. | 161-3357 | [1] | SPACER (12X20X10-MM THK) | |
| 4. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 5. | 178-3620 | [12] | STRAP-DUAL CLAMP | |
| 6. | 206-1345 | [1] | STRAP-CABLE | |
| 7. | 258-4106 | [1] | HARNESS AS-REAR (DOOR) | |
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 8L-8413 | [4] | STRAP-CABLE (WHITE) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 8. | 258-4179 | [1] | RAIL-MOUNTING | |
| 9. | 268-4071 Y | [2] | LAMP GP-FLOOD (12-VOLT, 4.7-AMPERE) | |
| 10. | 374-7463 BC | [1] | CAP-SEAL | |
| 11. | 374-7464 BC | [1] | CAP-SEAL | |
| 12. | 374-7465 BC | [1] | CAP-SEAL | |
| 13. | 374-7466 BC | [2] | CAP-SEAL | |
| 14. | 374-7467 BC | [1] | CAP-SEAL | |
| 15. | 300-9546 | [1] | ALARM AS-BACKUP (BACKUP) | |
| 16. | 310-0657 | [1] | PLATE | |
| 17. | 348-4171 C | [1] | HARNESS AS-PLATFORM | |
| 211-5358 E | CONDUIT-FLEXIBLE (186-CM) | |||
| 283-4198 E | CONDUIT (65-CM) | |||
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 262-9151 | [10] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 275-0600 | [19] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 127-5483 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [14] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 258-4171 | [1] | RECEPTACLE AS (48-PIN) | ||
| 169-0705 | [5] | SEAL | ||
| 8N-1549 | [1] | SOCKET-CONNECTOR (4-GA) | ||
| 8T-8730 | [41] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [17] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3S-2093 | [12] | STRAP-CABLE | ||
| 194-5226 | [1] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [1] | WIRE AS (14-GA) | ||
| 9G-4336 | [1] | TERMINAL-RING (4-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 18. | 132-5789 | [1] | CLIP (LADDER) | |
| 19. | 156-6175 | [1] | CLIP (LADDER) | |
| 20. | 266-3314 M | [1] | BOLT-FLANGE HEAD (M6X1X20.5-MM) | |
| 21. | 3S-2093 C | [23] | STRAP-CABLE | |
| 22. | 4P-7581 | [3] | CLIP (LADDER) | |
| 23. | 4P-8134 | [1] | CLIP (LADDER) | |
| 24. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 25. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 26. | 7X-2533 M | [2] | BOLT (M6X1X35-MM) | |
| 27. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 29. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 30. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 31. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 32. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 33. | 8F-7242 | [1] | WASHER (8.7X15.9X1.6-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45660206
258-4190: WIRING GP-QUICK COUPLER
258-4190 WIRING GP-QUICK COUPLER
S/N MST1-UP
PART OF 258-3691 COUPLER AR-QUICK
AN ATTACHMENT
S/N MST1-UP
PART OF 258-3691 COUPLER AR-QUICK
AN ATTACHMENT
For full view, you need register
Parts for your 262C SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [7] | STRAP-CABLE | |
| 2. | 3S-2093 B | [13] | STRAP-CABLE | |
| 3. | 258-4191 | [1] | HARNESS AS-QUICK COUPLER | |
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8L-8413 | [3] | STRAP-CABLE (WHITE) | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 186-3736 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 4. | 265-9513 | [1] | SWITCH AS-ROCKER (HYDRAULIC QUICK COUPLER) | |
| 111-7899 | [1] | GASKET | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP45660207
258-4125: WIRING GP-WORK TOOL
258-4125 WIRING GP-WORK TOOL
S/N MST1-UP
PART OF 342-5011 CONTROL AR-MACHINE, 258-3183, 258-3734 HYDRAULIC AR
AN ATTACHMENT
S/N MST1-UP
PART OF 342-5011 CONTROL AR-MACHINE, 258-3183, 258-3734 HYDRAULIC AR
AN ATTACHMENT
For full view, you need register
Parts for your 262C SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [9] | STRAP-CABLE | |
| 2. | 146-9439 | [5] | RELAY AS (12-VOLT)(FUSE BLOCK) | |
| 3. | 159-9495 | [1] | NUT (1-1/2-18-THD) | |
| 4. | 159-9496 | [1] | LOCKWASHER | |
| 5. | 3S-2093 | [8] | STRAP-CABLE | |
| 6. | 258-4126 | [1] | HARNESS AS-WORK TOOL | |
| 156-1458 | [1] | COVER | ||
| 9W-0852 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 156-1460 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 307-2338 E | SLEEVE (12-CM) | |||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 7. | 263-5418 | [1] | SWITCH AS-ROCKER | |
| 111-7899 | [1] | GASKET | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP45660208
258-2857: AXLE GP
For full view, you need register
Parts for your 262C SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-9023 | [1] | HOUSING-AXLE | |
| 2. | 142-9029 | [1] | SPACER (57.16X69.85X27.54-MM THK) | |
| 3. | 155-5652 | [1] | SEAL-LIP TYPE | |
| 4. | 155-9010 | [1] | CONE-BEARING | |
| 5. | 155-9432 | [1] | CONE-BEARING | |
| 6. | 155-9433 | [2] | CUP-BEARING | |
| 7. | 159-5772 | [8] | STUD (9/16-18X1.625-IN) | |
| 8. | 169-1679 | [1] | SEAL-LIP TYPE | |
| 9. | 258-2954 | [1] | SPINDLE (WHEEL) |
#SEBP45660209
420-9919: AXLE GP
For full view, you need register
Parts for your 262C SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-5652 | [1] | SEAL-LIP TYPE | |
| 2. | 169-1679 | [1] | SEAL-LIP TYPE | |
| 3. | 258-2954 | [1] | SPINDLE | |
| 4. | 420-9924 | [1] | HOUSING-AXLE | |
| 5. | 142-9029 | [1] | SPACER (57.16X69.85X27.54-MM THK) | |
| 6. | 155-9010 | [1] | CONE-BEARING | |
| 7. | 155-9432 | [1] | CONE-BEARING | |
| 8. | 155-9433 | [2] | CUP-BEARING | |
| 9. | 159-5772 | [8] | STUD (9/16-18X1.625-IN) |
Information:
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
Disassembly and Assembly
Engine Oil Pressure Switch - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines
3044C Industrial Engine and Engines for Caterpillar Built Machines
Service Magazine
Caterpillar Parts SIS Catalog 262C :
Truck sale:
40,000
Caterpillar 262C2, Skid Steer Loaders, Construction
- Skid Steer Loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
- Skid Steer Loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
24,900
