AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

258-4145 KIT-CONTROL MOUNTING -PRODUCT LINK S/N MAS1-UP AN ATTACHMENT 287C MULTI TERRAIN LOADER


ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-COMMUNICATION
ELECTRONICS GP-MACHINE
WIRING GP
LIGHTING GP

MULTI TERRAIN LOADER 287C MULTI TERRAIN LOADER MAS
 287C Multi Terrain Loader MAS00001-UP (MACHINE) POWERED BY 3044C Engine SEBP4569 287C MAS   (2007)

ELECTRICAL AND STARTING SYSTEM

ELECTRONICS GP-COMMUNICATION
KIT-CONTROL MOUNTING
258-4145 KIT-CONTROL MOUNTING
 

#SEBP45690170
 

258-4145: KIT-CONTROL MOUNTING

258-4145 KIT-CONTROL MOUNTING -PRODUCT LINK
S/N MAS1-UP
AN ATTACHMENT
i02637900 SEBP4569
2584145 KIT-CONTROL MOUNTING Parts scheme
  For full view, you need register

Parts for your 287C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 157-2528 [4] SPACER (7X16X20-MM THK)  
2. 258-3727 [9] SCREW-TRUSS HEAD (12-14X0.69-IN)  
3. 258-4148 [1] PLATE AS  
4. 258-4149 [1] PLATE AS  
5. 8C-8451 M [4] BOLT (M6X1X40-MM)  
  M   METRIC PART
 

#SEBP45690171
 

258-4185: KIT-SECURITY

258-4185 KIT-SECURITY
S/N MAS1-UP
Type 1
AN ATTACHMENT
i02637901 SEBP4569
2584185 KIT-SECURITY Parts scheme
  For full view, you need register

Parts for your 287C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 107-2417 B TAPE (FOAM)  
3. 205-0826 [1] FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)  
4. 206-5162 [2] KEY AS-ELECTRONIC (SECURITY)  
5. 206-5206 [1] COIL AS  
  198-5389 [1] FILM-IDENTIFICATION (IGNITION SWITCH)  
  205-8257 [1] COIL AS (EXCITER)  
6. 213-6065 [1] HARNESS AS-CONTROL (SECURITY)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  8T-8737 [2] PLUG-SEAL  
  180-9340 [8] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [10] STRAP-CABLE (WHITE)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7. 218-0404 [1] MODULE GP-INTERFACE (KEY)  
  216-2517 [1] MODULE GP-INTERFACE (KEY)  
  6V-6715 [1] SCREW-PAN HEAD (4-20X0.25-IN)  
  8C-3095 [1] SEAL-O-RING  
8. 219-6314 [2] KEY RING (IDENTIFICATION)  
9. 8Y-5947 [3] FASTENER  
  B   USE AS REQUIRED
 

#SEBP45690172
 

258-4185: KIT-SECURITY

258-4185 KIT-SECURITY
S/N MAS1-UP
Type 2
AN ATTACHMENT
i02981564 SEBP4569
2584185 KIT-SECURITY Parts scheme
  For full view, you need register

Parts for your 287C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 107-2417 B TAPE (FOAM)  
3. 205-0826 [2] FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)  
4. 285-3231 [2] KEY AS-ELECTRONIC (SECURITY)  
5. 205-8257 C [1] COIL AS (EXCITER)  
  5P-5677 D WIRE (18-GA, BLACK)(0.4-M)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  207-5271 [1] WASHER (27X60.5X0.36-MM THK)  
6. 213-6065 [1] HARNESS AS-CONTROL (SECURITY)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [2] PLUG-SEAL  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  180-9340 [8] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  8L-8413 [10] STRAP-CABLE (WHITE)  
7. 486-0923 Y [1] ELECTRONICS GP-MACHINE (MACHINE SECURITY SYSTEM)  
8. 5C-8311 [2] RING  
9. 8Y-5947 [3] FASTENER  
10. 198-5389 C [1] FILM-IDENTIFICATION (IGNITION SWITCH)  
11. 109-8895 [2] PLATE-IDENTIFICATION (LOGGING SKID)  
12. 219-6607 [2] FILM-INFORMATION (SECURITY SYSTEM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBP45690173
 

328-2366: KIT-WIRING HARNESS

328-2366 KIT-WIRING HARNESS -ACCUGRADE
S/N MAS1-UP
AN ATTACHMENT
i03720825 SEBP4569
3282366 KIT-WIRING HARNESS Parts scheme
  For full view, you need register

Parts for your 287C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [9] STRAP-CABLE  
2. 328-2367 [1] HARNESS AS-CONTROL  
  155-2271 KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  180-9340 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  2L-8078 [1] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
 

#SEBP45690174
 

258-4127: KIT-WORK TOOL WIRING

258-4127 KIT-WORK TOOL WIRING
S/N MAS1-UP
CANNOT BE USED WITH FACTORY EQUIPPED HIGH FLOW MACHINES
AN ATTACHMENT
i02637899 SEBP4569
2584127 KIT-WORK TOOL WIRING Parts scheme
  For full view, you need register

Parts for your 287C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [8] STRAP-CABLE  
2. 146-9439 [3] RELAY AS (12-VOLT)(WORK TOOL)  
3. 159-9495 [1] NUT (1-1/2-18-THD)  
4. 159-9496 [1] LOCKWASHER  
5. 1S-9593 [2] STRAP-CABLE  
6. 258-4126 [1] HARNESS AS-WORK TOOL  
  262-9151 [8] PIN-CONNECTOR (12-GA TO 14-GA)  
  307-2338 E SLEEVE (12-CM)  
  9W-0852 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [1] STRAP-CABLE (WHITE)  
  156-1458 [1] COVER  
  156-1460 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
7. 263-5418 [1] SWITCH AS-ROCKER  
  111-7899 [1] GASKET  
8. 272-1790 Y [1] CONTROL GP-HANDLE (LH)  
9. 3S-2093 [8] STRAP-CABLE  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP45690175
 

214-2968: LAMP GP-FLOOD

214-2968 LAMP GP-FLOOD
S/N MAS1-UP
12-VOLT
FIELD REPLACEMENT FOR @@@@@234-4328@@@@@
i04705550 SEBP4569
2142968 LAMP GP-FLOOD Parts scheme
  For full view, you need register

Parts for your 287C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-0607 [1] LAMP (12-VOLT, 55-WATT)(FLOODLIGHT)  
2. 6V-2317 M [1] BOLT (M8X1.25X30-MM)  
3. 5C-7261 M [1] NUT (M8X1.25-THD)  
4. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
5. 9X-4244 M [2] SCREW-SPECIAL (M4X1.79X25-MM)  
6. 202-6614 [1] LENS AS (FLOODLIGHT)  
7. 175-4292 [1] BODY AS  
8. 164-7556 [1] BRACKET (LAMP RETAINING)  
9. 175-4291 [1] BRACKET AS  
  M   METRIC PART
 

#SEBP45690176
 

234-4328: LAMP GP-FLOOD

234-4328 LAMP GP-FLOOD
S/N MAS1-UP
12-VOLT
PART OF 258-4164 LIGHTING GP-FLOOD
FIELD REPLACEMENT ORDER @@@@@214-2968@@@@@
i01925777 SEBP4569
2344328 LAMP GP-FLOOD Parts scheme
  For full view, you need register

Parts for your 287C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-0607 [1] LAMP (12-VOLT, 55-WATT)(FLOODLIGHT)  
2. 8T-0389 M [1] LOCKNUT (M10X1.5-THD)  
3. 9X-4244 M [2] SCREW-SPECIAL (M4X1.79X25-MM)  
4. 202-6614 [1] LENS AS (FLOODLIGHT)  
5. 234-7730 [1] BODY AS (FLOODLIGHT)  
6. 164-7556 [1] BRACKET (LAMP RETAINING)  
7. 234-7731 [1] BRACKET AS  
8. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
 

#SEBP45690177
 

268-4071: LAMP GP-FLOOD

268-4071 LAMP GP-FLOOD
S/N MAS1-UP
12-VOLT
PART OF 258-4107 WIRING GP-MACHINE
i05041394 SEBP4569
2684071 LAMP GP-FLOOD Parts scheme
  For full view, you need register

Parts for your 287C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-0607 [1] LAMP (12-VOLT, 55-WATT)(FLOODLIGHT)  
2. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 383-6901 [1] LENS AS (FLOODLIGHT)  
 

#SEBP45690178
 

195-0189: LAMP GP-HEAD & SIGNAL

195-0189 LAMP GP-HEAD & SIGNAL -HIGH, LOW BEAM-FRONT, RH
S/N MAS1-UP
12-VOLT
PART OF 258-3884, 333-7436 KIT-ROADING CONVERSION, 258-4130 LIGHTING GP-ROADING
AN ATTACHMENT
i02616380 SEBP4569
1950189 LAMP GP-HEAD & SIGNAL Parts scheme
  For full view, you need register

Parts for your 287C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 228-6054 [1] BEZEL  
3. 444-6523 [1] LENS AS (HEADLIGHT)  
4. 228-6052 [1] LENS AS (TURN SIGNAL)  
5. 228-6056 [6] SCREW (4-32X1.26-IN)  
6. 9W-3324 [1] LAMP-HEAD (12-VOLT, 60/55-WATT)(CLEAR)  
7. 226-4560 [1] LAMP (12-VOLT, 21-WATT)(AMBER)  
8. 226-4561 [1] LAMP (12-VOLT, 5-WATT)(CLEAR)  
9. 8T-0389 M [1] LOCKNUT (M10X1.5-THD)  
10. 473-8155 [1] SPACER (SPHERICAL)  
11. 8T-8737 [1] PLUG-SEAL  
12. 473-8156 [2] WASHER (SPHERICAL)  
13. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  M   METRIC PART
 

#SEBP45690179
 

195-0190: LAMP GP-HEAD & SIGNAL

195-0190 LAMP GP-HEAD & SIGNAL -HIGH, LOW BEAM-FRONT, LH
S/N MAS1-UP
12-VOLT
PART OF 258-3884, 333-7436 KIT-ROADING CONVERSION, 258-4130 LIGHTING GP-ROADING
AN ATTACHMENT
i02616381 SEBP4569
1950190 LAMP GP-HEAD & SIGNAL Parts scheme
  For full view, you need register

Parts for your 287C MULTI TERRAIN LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8737 [1] PLUG-SEAL  
2. 228-6054 [1] BEZEL  
3. 444-6523 [1] LENS AS (HEADLIGHT)  
4. 228-6052 [1] LENS AS (TURN SIGNAL)  
5. 228-6056 [6] SCREW (4-32X1.26-IN)  
6. 9W-3324 [1] LAMP-HEAD (12-VOLT, 60/55-WATT)(CLEAR)  
7. 226-4560 [1] LAMP (12-VOLT, 21-WATT)(AMBER)  
8. 226-4561 [1] LAMP (12-VOLT, 5-WATT)(CLEAR)  
9. 8T-0389 M [1] LOCKNUT (M10X1.5-THD)  
10. 473-8155 [1] SPACER (SPHERICAL)  
11. 8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
12. 473-8156 [2] WASHER (SPHERICAL)  
13. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  M   METRIC PART
 

Information:

Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Technical Information Bulletin
Product Link Registration Problems{733T, 7606}
Product Link Registration Problems{733T, 7606}
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat<SUP>&reg;</SUP> Machines Equipped With VIMS3G{7601, 7620}
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat® Machines Equipped With VIMS3G{7601, 7620}
Improper Customer Access and Asset Merging Within VisionLink<SUP>TM</SUP> and PartStore<SUP>TM</SUP> Through UCID Consolidation{7567, 7606}
Improper Customer Access and Asset Merging Within VisionLinkTM and PartStoreTM Through UCID Consolidation{7567, 7606}
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
New Processes Improve Registration of Product Link {7338, 7606}
2008/04/14
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
New Software Is Now Available for Product Link (PL 121) {7602, 7610, 7620}
2011/12/15
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620}
2012/10/03
Improved Process for Activating Product Link PL522 On Assets In China {7606}
2012/11/19
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2015/04/24
New Software Is Now Available For Product Link 522 Systems On All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2013/04/22
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
Improved VisionLink<SUP>TM</SUP>Store is Now Available for all Caterpillar Products {7606}
2013/03/29
Device Transfers Are Now Supported In VisionLink<SUP>TM</SUP> Store {7606}
2013/03/29
Improved VisionLink<SUP>TM</SUP> Store for Minimizing Delay in Appearance of VisionLink Store - Modules is Now Available for All Caterpillar Products {7606}
2013/03/29
New Product Link Software for PL121 and PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7610, 7620}
2013/05/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link 522 System {7606}
2013/07/22
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2013/07/08
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
New Software Is Now Available For All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2013/08/19
Procedure for Improving Antenna Communication on All Machines Equipped With Product Link {733B, 7606}
2013/11/08
Improvements for Products and Systems Connected to Product Link {7606}
2013/10/02
New Product Link Software for PL300 Is Now Available for All Cat <SUP>&reg;</SUP>Products {7606, 7620}
2013/10/21
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2013/10/02
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606}
2014/08/08
Loss of Daily Reports May Be an Indicator of End of Life for the Product Link<SUP>&reg;</SUP> ECM on PL321SR and PL321VSR Systems {7606}
2014/08/13
Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat<SUP>&reg;</SUP> Products with Cat<SUP>&reg;</SUP> Product Link 121/321 {7606}
2014/12/24
Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06
Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/06/26
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/09/11

Caterpillar Parts SIS Catalog 287C :

HEATER GP-JACKET WATER
218-0943 HEATER GP-JACKET WATER
HEATER GP-JACKET WATER
218-0942 HEATER GP-JACKET WATER
378-3722 HARNESS AS-WORK TOOL
225-8015 HARNESS AS-WORK TOOL
165-4894 HARNESS AS-WORK TOOL
258-4160 HARNESS AS-WIRING
258-4158 HARNESS AS-SENSOR
258-4106 HARNESS AS-REAR
KIT-SECURITY
258-4185 KIT-SECURITY
KIT-SECURITY
258-4185 KIT-SECURITY
KIT-WIRING HARNESS
328-2366 KIT-WIRING HARNESS
KIT-WORK TOOL WIRING
258-4127 KIT-WORK TOOL WIRING
LAMP GP-FLOOD
214-2968 LAMP GP-FLOOD
LAMP GP-FLOOD
234-4328 LAMP GP-FLOOD
LAMP GP-FLOOD
268-4071 LAMP GP-FLOOD
LAMP GP-HEAD & SIGNAL
195-0189 LAMP GP-HEAD & SIGNAL

Truck sale:

Caterpillar 287C2
 
Caterpillar 287C2
- Skid Steer Loaders
FOLEY EQUIPMENT COMPANY
 
45,511 
Caterpillar 287C2 A2Q, Skid Steer Loaders, Construction


 
45,901 
Caterpillar 287C2, track loaders, Construction


Caterpillar 287C2 A2Q, Skid Steer Loaders, Construction
45,511 
Caterpillar 287C2 A2Q, Skid Steer Loaders, Construction

MICHIGAN CAT
Caterpillar 287C2, rupsladers, Bouw
39.543 
Caterpillar 287C2, rupsladers, Bouw
- track loaders
MILTON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.