262-3764 SENSOR GP-SPEED -MOTOR S/N JAY1-UP PART OF 258-2408, 258-2409, 258-2416 MOTOR & MTG GP-HYDROSTATIC AN ATTACHMENT 246C



ELECTRICAL AND STARTING SYSTEM
SENSOR GP
STARTING MOTOR GP
SWITCH GP
WIRING GP

SKID STEER LOADER 246C SKID STEER LOADER JAY
 246C Skid Steer Loader JAY00001-UP (MACHINE) POWERED BY 3044C Engine SEBP4570 246C JAY   (2007)

ELECTRICAL AND STARTING SYSTEM

SENSOR GP
SENSOR GP-POSITION
160-2443 SENSOR GP-POSITION
SENSOR GP-POSITION
266-1467 SENSOR GP-POSITION
SENSOR GP-SPEED
191-8303 SENSOR GP-SPEED
SENSOR GP-SPEED
262-3764 SENSOR GP-SPEED
SENSOR GP-TEMP & PRESS
238-8277 SENSOR GP-TEMP & PRESS
 

#SEBP45700180
 

262-3764: SENSOR GP-SPEED

262-3764 SENSOR GP-SPEED -MOTOR
S/N JAY1-UP
PART OF 258-2408, 258-2409, 258-2416 MOTOR & MTG GP-HYDROSTATIC
AN ATTACHMENT
i02635720 SEBP4570
2623764 SENSOR GP-SPEED Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

Pos. Part No Qty Parts name Comments
1. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 9X-1813 E SLEEVE (28-CM)  
4. 9X-7408 [1] SEAL-O-RING  
5. 171-5349 B [1] STRAP-MARKER  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP45700181
 

238-8277: SENSOR GP-TEMP & PRESS

238-8277 SENSOR GP-TEMP & PRESS -ENGINE
S/N CJS1-60343
PART OF 262-7288 ENGINE AR-PRIMARY
AN ATTACHMENT
i01941343 SEBP4570
2388277 SENSOR GP-TEMP & PRESS Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

Pos. Part No Qty Parts name Comments
1. 327-0752 [1] SWITCH-OIL PRESSURE (ENGINE)  
2. 238-8274 [1] SWITCH-TEMPERATURE (ENGINE COOLANT, COLD START)  
 

#SEBP45700182
 

143-0539: STARTING MOTOR GP-ELECTRIC

143-0539 STARTING MOTOR GP-ELECTRIC
S/N CYM1-UP; CJS1-70000
12-VOLT
PART OF 287-6181 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i00597680 SEBP4570
1430539 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

Pos. Part No Qty Parts name Comments
1. 8C-9778 [1] PLUNGER AS  
2. 8C-9783 [1] GASKET  
3. 2P-8104 [1] BEARING  
4. 7T-6092 [1] HOLDER AS-BRUSH  
5. 8T-4133 M [2] NUT (M10X1.5-THD)  
6. 7T-6088 [1] BEARING AS  
7. 7T-6087 [1] WASHER (15.2X40X0.5-MM THK)  
8. 7T-6093 [1] CLUTCH AS  
9. 8J-4455 [1] BALL  
10. 7T-6090 [1] SPRING  
11. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
12. 3E-5153 [1] COVER-STARTING MOTOR  
13. 3E-5154 [1] BUSHING-STARTING MOTOR  
14. 8F-1434 [1] LOCKWASHER  
15. 100-4113 [1] SWITCH AS (STARTING MOTOR)(12-VOLT)  
16. 100-4119 [1] ARMATURE AS  
17. 100-4118 [1] CASE AS-STARTING MOTOR  
18. 100-4115 [1] HOUSING-STARTING MOTOR  
19. 143-1344 [1] FRAME-STARTER  
20. 100-3685 [1] CAP  
   
    AVAILABLE REPAIR KIT(S):
  7T-6099 [1] KIT-GEAR (STARTING MOTOR)  
    (INCLUDES RETAINER, PINION & ROLLERS)
  146-6729 [1] KIT-HARDWARE (STARTING MOTOR)  
    (INCLUDES BOLTS, SCREWS, SCREW ASSEMBLIES & PLATE)
  100-4112 [1] KIT-CONTACT (STARTING MOTOR)  
    (INCLUDES NUT, WASHERS, SEAL, BUSHINGS, PLATE & BOLT)
  M   METRIC PART
 

#SEBP45700183
 

287-6181: STARTING MOTOR GP-ELECTRIC

287-6181 STARTING MOTOR GP-ELECTRIC
S/N CYM1-UP; CJS1-70000
12-VOLT
PART OF 262-7288, 287-8073 ENGINE AR-PRIMARY
AN ATTACHMENT
i02568571 SEBP4570
2876181 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

Pos. Part No Qty Parts name Comments
1. 143-0539 Y [1] STARTING MOTOR GP-ELECTRIC (12-VOLT)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP45700184
 

300-1071: SWITCH GP-PRESSURE

300-1071 SWITCH GP-PRESSURE
S/N CYM1-UP; CJS60344-70000
PART OF 262-7288, 287-8073 ENGINE AR-PRIMARY
AN ATTACHMENT
i02619711 SEBP4570
3001071 SWITCH GP-PRESSURE Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

Pos. Part No Qty Parts name Comments
1. 327-0752 [1] SWITCH-OIL PRESSURE (ENGINE)  
 

#SEBP45700185
 

258-4146: WIRING GP-AIR CONDITIONER

258-4146 WIRING GP-AIR CONDITIONER
S/N JAY1-4503
PART OF 258-4260 AIR CONDITIONER AR, 258-4250 HEATER AR-CAB
AN ATTACHMENT
i02628567 SEBP4570
2584146 WIRING GP-AIR CONDITIONER Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

Pos. Part No Qty Parts name Comments
1. 206-2423 [3] SADDLE-MOUNTING  
2. 258-4147 [1] HARNESS AS-HEATER & AIR COND  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)(1)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [5] STRAP-CABLE (WHITE)  
  8T-8737 [6] PLUG-SEAL  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  100-6674 [2] SEAL-CONNECTOR  
  186-3735 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  186-3736 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [16] SOCKET-CONNECTOR (14-GA TO 16-GA)  
3. 3S-2093 [18] STRAP-CABLE  
  E   ORDER BY THE CENTIMETER
 

#SEBP45700186
 

348-4174: WIRING GP-AIR CONDITIONER

348-4174 WIRING GP-AIR CONDITIONER
S/N JAY4504-UP
PART OF 258-4260 AIR CONDITIONER AR
AN ATTACHMENT
i04034514 SEBP4570
3484174 WIRING GP-AIR CONDITIONER Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

Pos. Part No Qty Parts name Comments
1. 206-2423 [3] SADDLE-MOUNTING  
2. 348-4173 Y [1] HARNESS AS-HEATER & AIR COND  
3. 115-1615 [1] RELAY AS (12-VOLT)(AIR CONDITIONER)  
4. 3S-2093 [22] STRAP-CABLE  
5. 5C-2890 M [1] NUT (M6X1-THD)  
6. 8T-4138 M [1] BOLT (M6X1X20-MM)  
7. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
8. 430-3381 Y [2] HARNESS AS-MOTOR  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45700187
 

258-4100: WIRING GP-CAB

258-4100 WIRING GP-CAB
S/N JAY1-4503
PART OF 258-4000 CAB AR-ENCLOSED ROPS
i02623265 SEBP4570
2584100 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

Pos. Part No Qty Parts name Comments
1. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 7K-1181 [14] STRAP-CABLE  
4. 8T-9655 [8] MOUNT-ISOLATION  
5. 100-5805 [1] CAP-RECEPTACLE (3-PIN)  
6. 126-1774 [2] COVER-CONNECTOR (ENDBALL-CONNECTOR)  
7. 146-9439 [3] RELAY AS (12-VOLT)(FUSE BLOCK)  
8. 246-9371 [1] COVER-RELAY  
9. 258-3727 [8] SCREW-TRUSS HEAD (12-14X0.69-IN)  
10. 258-4102 Y [1] HARNESS AS-CAB  
11. 258-4103 Y [1] ELECTRONICS GP-MACHINE  
12. 258-4135 Y [2] RELAY GP (12-VOLT)(MAIN POWER)  
13. 258-4136 [1] FUSE AS (MAIN POWER)  
  267-2680 [2] FUSE (20-AMPERE)  
  267-5211 [1] SEAL (DUAL FUSE HOLDER)  
  267-5213 [1] COVER  
14. 258-4138 [1] FILM-INFORMATION (POWER DISTRIBUTION)  
15. 258-4143 [1] BAR-BUS  
16. 258-4150 [1] PLATE AS  
17. 258-4154 [1] BRACKET  
18. 258-4155 [1] BRACKET  
19. 258-4160 Y [1] HARNESS AS-WIRING  
20. 258-4178 [1] FLANGE-MOUNTING  
21. 258-4196 [2] WIRE AS (10-GA)  
22. 156-6175 [2] CLIP (LADDER)  
23. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
24. 102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
25. 3S-2093 [29] STRAP-CABLE  
26. 4P-7581 [2] CLIP (LADDER)  
27. 4P-8134 [2] CLIP (LADDER)  
28. 5C-2890 M [12] NUT (M6X1-THD)  
29. 5C-7261 M [4] NUT (M8X1.25-THD)  
30. 5C-9553 M [4] BOLT (M6X1X16-MM)  
31. 5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
32. 5P-7162 [8] SCREW-MACHINE (10-32X0.5-IN)  
33. 6V-5834 [4] SCREW-HEAD (10-14X0.75-IN)  
34. 7X-0818 M [4] BOLT (M8X1.25X45-MM)  
35. 7X-2534 M [3] BOLT (M6X1X50-MM)  
36. 8C-8558 [2] SCREW-LOCK (4-40X0.25-IN)  
37. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
38. 8T-4205 [18] WASHER-HARD (7.2X14.5X2-MM THK)  
39. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
40. 8T-8737 [20] PLUG-SEAL  
41. 8T-4970 M [2] BOLT (M6X1X14-MM)  
42. 5P-9909 D SEAL (0.2-M)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45700188
 

258-4100: WIRING GP-CAB

258-4100 WIRING GP-CAB
S/N JAY4504-9030
PART OF 258-4000 CAB AR-ENCLOSED ROPS
i04038806 SEBP4570
2584100 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

Pos. Part No Qty Parts name Comments
1. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 7K-1181 [14] STRAP-CABLE  
4. 8T-9655 [8] MOUNT-ISOLATION  
5. 100-5805 [1] CAP-RECEPTACLE (3-PIN)(3-PIN)  
6. 126-1774 [2] COVER-CONNECTOR (ENDBALL-CONNECTOR)  
7. 146-9439 [3] RELAY AS (12-VOLT)(FUSE BLOCK)  
8. 246-9371 [1] COVER-RELAY  
9. 258-3727 [8] SCREW-TRUSS HEAD (12-14X0.69-IN)  
10. 348-4170 C [1] HARNESS AS-CAB  
  313-9053 [2] BLOCK AS-FUSE  
    (EACH INCLUDES)
  5C-2890 M [2] NUT (M6X1-THD)  
  8C-3398 [2] LOCKWASHER  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  8T-8799 [6] BOOT (RED)  
  283-0632 E CONDUIT (100-CM)  
  113-8490 [7] FUSE (10-AMPERE)  
  113-8491 [10] FUSE (15-AMPERE)  
  113-8492 [3] FUSE (20-AMPERE)  
  213-0139 [25] PIN (4-MM)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3401 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [7] PIN-CONNECTOR (14-GA TO 16-GA)  
  258-4172 [3] PLUG AS-CONNECTOR  
  8N-1548 [1] PIN-CONNECTOR (4-GA)  
  147-1445 [1] PLUG AS-CONNECTOR (70-PIN)  
  147-1446 [1] PLUG AS-CONNECTOR (70-PIN)  
    (EACH PLUG AS INCLUDES)
  159-9322 [1] SEAL-O-RING  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  [1] PLUG AS-CONNECTOR  
  7R-2751 [25] PLUG-CONNECTOR (1-PIN)  
  8T-8737 [88] PLUG-SEAL  
  127-5484 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  9W-1951 [1] RECEPTACLE-CONNECTOR (9-PIN)  
  169-0705 [21] SEAL  
  274-3776 [1] CAP-SEAL  
  128-4123 [19] SEAL-CABLE  
  128-5016 [25] SEAL-CABLE  
  7R-2750 [7] SEAL-CONNECTOR  
  186-3736 [38] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0844 [15] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1766 [93] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  180-9340 [19] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  202-0313 [25] TERMINAL AS (18-GA)  
    (EACH INCLUDES)
  128-5016 [1] SEAL-CABLE  
  202-0314 [26] TERMINAL AS (14-GA)  
    (EACH INCLUDES)
  128-4123 [1] SEAL-CABLE  
  374-8372 [75] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [51] STRAP-CABLE  
  329-3734 B TAPE-ELECTRICAL  
  2L-8069 [2] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8078 [1] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
  2L-8067 [7] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(60-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)  
  5P-3454 TERMINAL-RING (4-GA, 5/16-IN SCREW)  
11. 258-4103 Y [1] ELECTRONICS GP-MACHINE  
12. 258-4135 Y [2] RELAY GP (12-VOLT)(MAIN POWER)  
13. 258-4136 [1] FUSE AS (MAIN POWER)  
  267-2680 [2] FUSE (20-AMPERE)  
  267-5211 [1] SEAL (DUAL FUSE HOLDER)  
  267-5213 [1] COVER  
14. 258-4138 [1] FILM-INFORMATION (POWER DISTRIBUTION)  
15. 258-4143 [1] BAR-BUS  
16. 258-4150 [1] PLATE AS  
17. 258-4154 [1] BRACKET  
18. 258-4155 [1] BRACKET  
19. 258-4160 Y [1] HARNESS AS-WIRING  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  262-9151 [3] PIN-CONNECTOR (12-GA TO 14-GA)  
  271-5604 [18] PIN-CONNECTOR (20-GA)  
  9W-0852 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [10] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  194-5226 [19] WIRE AS (16-GA)  
    -OR-
  194-5227 [19] WIRE AS (14-GA)  
  8T-8730 [11] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  135-5009 E TUBE-HEAT SHRINK (32-MM DIA)(10-CM)  
  169-0705 [6] SEAL  
  201-3304 E CONDUIT (131-CM)  
  211-5358 E CONDUIT-FLEXIBLE (19-CM)  
  271-5604 [18] PIN-CONNECTOR (20-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  258-4170 [1] RECEPTACLE AS-CONNECTOR (48-PIN)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8L-8413 [14] STRAP-CABLE (WHITE)  
  8T-8737 [26] PLUG-SEAL  
20. 258-4178 [1] FLANGE-MOUNTING  
21. 258-4196 [2] WIRE AS (10-GA)  
22. 156-6175 [2] CLIP (LADDER)  
23. 374-7467 C [1] CAP-SEAL  
24. 374-7468 C [1] CAP-SEAL  
25. 3S-2093 [29] STRAP-CABLE  
26. 4P-7581 [2] CLIP (LADDER)  
27. 4P-8134 [2] CLIP (LADDER)  
28. 5C-2890 M [12] NUT (M6X1-THD)  
29. 5C-7261 M [4] NUT (M8X1.25-THD)  
30. 5C-9553 M [4] BOLT (M6X1X16-MM)  
31. 5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
32. 5P-7162 [8] SCREW-MACHINE (10-32X0.5-IN)  
33. 110-2028 [4] SCREW-PAN HEAD (10-14X0.75-IN)  
34. 297-1003 M [4] BOLT-SOCKET HEAD (M8X1.25X45-MM)  
35. 7X-2534 M [3] BOLT (M6X1X50-MM)  
36. 8C-8558 [2] SCREW-LOCK (4-40X0.25-IN)  
37. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
38. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
39. 8F-7242 [8] WASHER (8.7X15.9X1.6-MM THK)  
41. 8T-4970 M [2] BOLT (M6X1X14-MM)  
42. 5P-9909 D SEAL (0.2-M)  
43. 1A-8912 [10] WASHER (6.7X12.7X1.6-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45700189
 

258-4100: WIRING GP-CAB

258-4100 WIRING GP-CAB
S/N JAY9031-UP
PART OF 258-4000 CAB AR-ENCLOSED ROPS
i05402514 SEBP4570
2584100 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

Pos. Part No Qty Parts name Comments
1. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 7K-1181 [14] STRAP-CABLE  
4. 8T-9655 [8] MOUNT-ISOLATION  
5. 100-5805 [1] CAP-RECEPTACLE (3-PIN)(3-PIN)  
6. 126-1774 [2] COVER-CONNECTOR (ENDBALL-CONNECTOR)  
7. 146-9439 [3] RELAY AS (12-VOLT)(FUSE BLOCK)  
8. 246-9371 [1] COVER-RELAY  
9. 258-3727 [8] SCREW-TRUSS HEAD (12-14X0.69-IN)  
10. 430-7601 CY [1] HARNESS AS-CAB  
11. 258-4103 Y [1] ELECTRONICS GP-MACHINE  
12. 258-4135 Y [2] RELAY GP (12-VOLT)(MAIN POWER)  
13. 258-4136 [1] FUSE AS (MAIN POWER)  
  267-2680 [2] FUSE (20-AMPERE)  
  267-5211 [1] SEAL (DUAL FUSE HOLDER)  
  267-5213 [1] COVER  
14. 258-4138 [1] FILM-INFORMATION (POWER DISTRIBUTION)  
15. 258-4143 [1] BAR-BUS  
16. 258-4150 [1] PLATE AS  
17. 258-4154 [1] BRACKET  
18. 258-4155 [1] BRACKET  
19. 258-4160 Y [1] HARNESS AS-WIRING (SEAT)  
20. 258-4178 [1] FLANGE-MOUNTING  
21. 258-4196 [2] WIRE AS (10-GA)  
22. 156-6175 [2] CLIP (LADDER)  
23. 374-7467 [1] CAP-SEAL  
24. 374-7468 [1] CAP-SEAL  
25. 3S-2093 [29] STRAP-CABLE  
26. 4P-7581 [2] CLIP (LADDER)  
27. 4P-8134 [2] CLIP (LADDER)  
28. 5C-2890 M [12] NUT (M6X1-THD)  
29. 5C-7261 M [4] NUT (M8X1.25-THD)  
30. 5C-9553 M [4] BOLT (M6X1X16-MM)  
31. 5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
32. 5P-7162 [8] SCREW-MACHINE (10-32X0.5-IN)  
33. 110-2028 [4] SCREW-PAN HEAD (10-14X0.75-IN)  
34. 297-1003 M [4] BOLT-SOCKET HEAD (M8X1.25X45-MM)  
35. 7X-2534 M [3] BOLT (M6X1X50-MM)  
36. 111-0910 [2] SCREW-PAN HEAD (4-40X0.25-IN)  
37. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
38. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
39. 8F-7242 [8] WASHER (8.7X15.9X1.6-MM THK)  
41. 8T-4970 M [2] BOLT (M6X1X14-MM)  
42. 5P-9909 D SEAL (0.2-M)  
43. 1A-8912 [10] WASHER (6.7X12.7X1.6-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Caterpillar Parts SIS Catalog 246C :

SENSOR GP-SPEED
191-8303 SENSOR GP-SPEED
SENSOR GP-POSITION
266-1467 SENSOR GP-POSITION
SENSOR GP-POSITION
160-2443 SENSOR GP-POSITION
RELAY GP
258-4135 RELAY GP
292-1271 MAST GP
LIGHTING GP-WARNING BEACON
258-4184 LIGHTING GP-WARNING BEACON
LIGHTING GP-STOP & TAIL
258-4169 LIGHTING GP-STOP & TAIL
LIGHTING GP-ROADING
333-4957 LIGHTING GP-ROADING
SENSOR GP-TEMP & PRESS
238-8277 SENSOR GP-TEMP & PRESS
STARTING MOTOR GP-ELECTRIC
143-0539 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
287-6181 STARTING MOTOR GP-ELECTRIC
SWITCH GP-PRESSURE
300-1071 SWITCH GP-PRESSURE
WIRING GP-AIR CONDITIONER
258-4146 WIRING GP-AIR CONDITIONER
WIRING GP-AIR CONDITIONER
348-4174 WIRING GP-AIR CONDITIONER
WIRING GP-CAB
258-4100 WIRING GP-CAB
WIRING GP-CAB
258-4100 WIRING GP-CAB

Truck sale:

Caterpillar 246C
 
Caterpillar 246C
- Skid Steer Loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 246CSTD1C, Skid Steer Loaders, Construction
32,900 
Caterpillar 246CSTD1C, Skid Steer Loaders, Construction
- Skid Steer Loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 246C
 
Caterpillar 246C
- Skid Steer Loaders
FINNING CANADA
 
20,931 
Caterpillar 246C, Skid Steer Loaders, Construction
- Skid Steer Loaders
SIME DARBY INDUSTRIAL SDN BHD
Caterpillar 246C HF, Skid Steer Loaders, Construction
40,170 
Caterpillar 246C HF, Skid Steer Loaders, Construction
- Skid Steer Loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC