AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

258-4440 DOOR & MTG GP-CAB -WITH CAB TILT GAS SPRING S/N JAY2060-UP CANNOT BE USED WITH @@@@@258-4070@@@@@, @@@@@258-4080@@@@@, @@@@@258-3738@@@@@, @@@@@258-3740@@@@@ AN ATTACHMENT 246C


OPERATOR STATION
DOOR GP
DUCT GP

SKID STEER LOADER 246C SKID STEER LOADER JAY
 246C Skid Steer Loader JAY00001-UP (MACHINE) POWERED BY 3044C Engine SEBP4570 246C JAY   (2007)

OPERATOR STATION

DOOR GP
DOOR & MTG GP-CAB
258-4070 DOOR & MTG GP-CAB
DOOR & MTG GP-CAB
258-4080 DOOR & MTG GP-CAB
DOOR & MTG GP-CAB
258-4440 DOOR & MTG GP-CAB
DOOR GP-CAB
258-4086 DOOR GP-CAB
DOOR GP-CAB
258-4086 DOOR GP-CAB
DOOR GP-CAB
258-4087 DOOR GP-CAB
 

#SEBP45700860
 

258-4440: DOOR & MTG GP-CAB

258-4440 DOOR & MTG GP-CAB -WITH CAB TILT GAS SPRING
S/N JAY2060-UP
CANNOT BE USED WITH @@@@@258-4070@@@@@, @@@@@258-4080@@@@@, @@@@@258-3738@@@@@, @@@@@258-3740@@@@@
AN ATTACHMENT
i02879593 SEBP4570
2584440 DOOR & MTG GP-CAB Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 388-8028 [1] SPACER (10X20X6-MM THK)  
2. 388-8019 [5] WASHER (10.5X20X2-MM THK)  
3. 8T-2444 [2] STUD-BALL  
4. 172-8591 M [1] NUT-CLIP (M6X1-THD)  
5. 153-2682 [2] SPRING AS-GAS (CAB)  
6. 206-1345 [4] STRAP-CABLE  
7. 258-3281 [1] BRACKET AS  
8. 258-3725 [1] HINGE  
9. 258-3726 [2] PIN  
10. 258-3761 [1] SPRING AS-GAS (DOOR)  
11. 258-3764 [1] STRIKER AS  
12. 258-4078 [1] TANK AS-WINDOW WASHER  
  6T-1375 [1] PUMP AS-WASHER  
  8E-8293 [1] GROMMET  
  258-3296 [1] CAP-VENTED (WASHER)  
13. 258-4141 [2] CLIP  
14. 258-4157 Y [1] HARNESS AS-CAB  
15. 258-4356 [1] BRACKET AS  
16. 258-4442 Y [1] DOOR GP-CAB (GLASS)  
17. 284-7932 [1] FILM-NOTICE (ALTERNATE EXIT, READ OMM)  
18. 095-1325 [1] PIN-CLEVIS  
19. 127-2170 M [4] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
20. 7X-0579 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
21. 215-6406 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
22. 5C-2890 M [1] NUT (M6X1-THD)  
23. 5P-0372 [4] LOCK PIN  
24. 6L-3966 [3] PIN  
25. 8S-7803 [2] RING-RETAINING  
26. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8T-4244 M [1] NUT (M12X1.75-THD)  
28. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
29. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
30. 7X-0579 B [2] WASHER-HARD (8.8X25.5X2-MM THK)  
31. 144-0195 E HOSE (90-CM)  
32. 8T-6936 D SEAL (0.1-M EACH)  
33. 388-8018 [2] SPACER (12.7X22X19.1MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45700861
 

258-4086: DOOR GP-CAB

258-4086 DOOR GP-CAB -GLASS
S/N JAY1-3274
PART OF 258-4070 DOOR & MTG GP-CAB, 258-2473 KIT-CAB DOOR & MOUNTING
AN ATTACHMENT
i02636767 SEBP4570
2584086 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [2] NUT (M6X1-THD)  
2. 8G-1151 [1] CONNECTOR-HOSE  
3. 8Y-4615 [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
4. 129-8542 [2] RETAINER  
5. 129-8545 [2] WASHER (13X40X3-MM THK)  
6. 136-4192 M [1] BOLT (M6X1X35-MM)  
7. 154-5423 B [1] SPACER (6.6X12.7X17-MM THK)  
8. 206-1345 [2] STRAP-CABLE  
9. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
10. 229-8757 [1] SWITCH AS-LIMIT (DOOR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 252-1862 J [1] HANDLE AS-PULL (PULL)  
12. 253-1817 B [1] SPACER (6.5X14.5X12-MM THK)  
13. 258-3280 [1] LATCH AS (INNER)  
14. 258-3288 [1] HANDLE AS (LOWER)  
15. 258-3289 [2] LATCH AS (OUTER)  
16. 258-3290 [1] GASKET  
17. 258-3294 [1] HANDLE AS (UPPER)  
18. 258-3298 [1] GROMMET  
19. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
20. 258-3762 [2] GROMMET  
21. 258-4013 [1] BRACKET AS  
22. 258-4014 [1] HINGE (LOWER)  
23. 258-4016 [1] COVER (WIPER)  
24. 258-4071 [1] GLASS (DOOR)  
25. 258-4073 [1] HINGE (UPPER)  
26. 258-4075 [4] GASKET  
27. 258-4076 [1] HANDLE AS  
28. 258-4082 [1] GASKET  
29. 258-4083 [1] COVER-LATCH  
30. 258-4084 [1] BRACKET  
31. 258-4085 [2] BUSHING  
32. 258-4156 [1] HARNESS AS-CAB (DOOR, FRONT)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [5] STRAP-CABLE (WHITE)  
  091-2436 [4] TERMINAL-BLADE (18-GA TO 22-GA)  
  104-1995 [3] TERMINAL-BLADE (14-GA TO 18-GA)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  180-9339 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  180-9340 [3] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  228-5856 [1] CONNECTOR (10-PIN)  
33. 264-4407 [1] MOTOR GP-WINDOW WIPER (CAB DOOR)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3F-9556 [1] LOCKWASHER  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  263-3823 [1] CAP-WIPER  
34. 264-4408 [1] ARM GP-WINDOW WIPER (CAB DOOR)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
35. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)(WIPER)  
  111-7899 [1] GASKET  
36. 292-6936 M [1] BOLT (M6X1X70-MM)  
37. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
38. 3S-2093 [2] STRAP-CABLE  
39. 6V-7357 M [4] BOLT (M6X1X25-MM)  
40. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
41. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
42. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 258-4430 E SEAL (329-CM)  
44. 129-3178 M [1] LOCKNUT (M6X1-THD)  
45. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP45700862
 

258-4086: DOOR GP-CAB

258-4086 DOOR GP-CAB -GLASS
S/N JAY3275-UP
PART OF 258-4070 DOOR & MTG GP-CAB, 258-2473 KIT-CAB DOOR & MOUNTING
AN ATTACHMENT
i03378864 SEBP4570
2584086 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [2] NUT (M6X1-THD)  
2. 8G-1151 [1] CONNECTOR-HOSE  
3. 322-9633 C [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
4. 129-8542 [2] RETAINER  
5. 129-8545 [2] WASHER (13X40X3-MM THK)  
6. 136-4192 M [1] BOLT (M6X1X35-MM)  
7. 395-0687 [1] SPACER (6.6X12.7X15.9-MM THK)  
8. 206-1345 [2] STRAP-CABLE  
9. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
10. 229-8757 [1] SWITCH AS-LIMIT (DOOR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 252-1862 J [1] HANDLE AS-PULL  
12. 253-1817 [1] SPACER (6.5X14.5X12-MM THK)  
13. 258-3280 [1] LATCH AS (INNER)  
14. 364-1821 [1] HANDLE AS  
15. 258-3289 [2] LATCH AS (OUTER)  
16. 258-3290 [1] GASKET  
17. 364-1822 [1] HANDLE AS  
18. 258-3298 [1] GROMMET  
19. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
20. 331-8050 [2] BUMPER  
21. 258-4013 [1] BRACKET AS  
  159-9540 M [1] NUT-WELD (M8X1.25-THD)  
22. 258-4014 [1] HINGE (LOWER)  
23. 258-4016 [1] COVER (WIPER)  
24. 258-4071 [1] GLASS (DOOR)  
25. 258-4073 [1] HINGE (UPPER)  
26. 258-4075 [4] GASKET  
27. 258-4076 [1] HANDLE AS  
28. 258-4082 [1] GASKET  
29. 258-4083 [1] COVER-LATCH  
30. 258-4084 [1] BRACKET  
31. 258-4085 [2] BUSHING  
32. 258-4156 Y [1] HARNESS AS-CAB (DOOR, FRONT)  
33. 330-5011 CY [1] MOTOR GP-WINDOW WIPER (12-VOLT)(CAB DOOR)  
34. 264-4408 [1] ARM GP-WINDOW WIPER (CAB DOOR)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
35. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)  
  111-7899 [1] GASKET  
36. 292-6936 M [1] BOLT (M6X1X70-MM)  
37. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
38. 3S-2093 [2] STRAP-CABLE  
39. 6V-7357 M [4] BOLT (M6X1X25-MM)  
40. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
41. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
42. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 398-1530 E SEAL (329-CM)  
44. 129-3178 M [1] LOCKNUT (M6X1-THD)  
45. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
46. 8S-3193 [2] NUT-PUSH ON  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45700863
 

258-4087: DOOR GP-CAB

258-4087 DOOR GP-CAB -POLYCARBONATE
S/N JAY1-UP
PART OF 258-4080 DOOR & MTG GP-CAB, 280-6084 KIT-CAB DOOR & MOUNTING
Type 1
AN ATTACHMENT
i02618763 SEBP4570
2584087 DOOR GP-CAB Parts scheme 2584087 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [2] NUT (M6X1-THD)  
2. 8G-1151 [1] CONNECTOR-HOSE  
3. 8Y-4615 [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
4. 129-8542 [2] RETAINER  
5. 129-8545 [2] WASHER (13X40X3-MM THK)  
6. 136-4192 M [1] BOLT (M6X1X35-MM)  
7. 154-5423 B [1] SPACER (6.6X12.7X17-MM THK)  
8. 206-1345 [2] STRAP-CABLE  
9. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
10. 229-8757 [1] SWITCH AS-LIMIT  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
11. 252-1862 J [1] HANDLE AS-PULL (PULL)  
12. 253-1817 B [1] SPACER (6.5X14.5X12-MM THK)  
13. 258-3280 [1] LATCH AS (INNER)  
14. 258-3288 [1] HANDLE AS (LOWER)  
15. 258-3289 [2] LATCH AS (OUTER)  
16. 258-3290 [1] GASKET  
17. 258-3294 [1] HANDLE AS (UPPER)  
18. 258-3298 [1] GROMMET  
19. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
20. 258-3762 [2] GROMMET  
21. 258-4013 [1] BRACKET AS  
22. 258-4014 [1] HINGE (LOWER)  
23. 258-4016 [1] COVER (WIPER)  
24. 258-4073 [1] HINGE (UPPER)  
25. 258-4075 [4] GASKET  
26. 258-4076 [1] HANDLE AS  
27. 258-4081 [1] WINDOW  
28. 258-4082 [1] GASKET  
29. 258-4083 [1] COVER-LATCH  
30. 258-4084 [1] BRACKET  
31. 258-4085 [2] BUSHING  
32. 258-4156 Y [1] HARNESS AS-CAB (DOOR, FRONT)  
33. 264-4407 [1] MOTOR GP-WINDOW WIPER (CAB DOOR)  
  3F-9556 [1] LOCKWASHER  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  263-3823 [1] CAP-WIPER  
34. 264-4408 [1] ARM GP-WINDOW WIPER (CAB DOOR)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
35. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)  
  111-7899 [1] GASKET  
36. 292-6936 M [1] BOLT (M6X1X70-MM)  
37. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
38. 3S-2093 [2] STRAP-CABLE  
39. 6V-7357 M [4] BOLT (M6X1X25-MM)  
40. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
41. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
42. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 258-4430 E SEAL (331-CM)  
44. 129-3178 M [1] LOCKNUT (M6X1-THD)  
45. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45700864
 

258-4087: DOOR GP-CAB

258-4087 DOOR GP-CAB -POLYCARBONATE
S/N JAY1-UP
PART OF 258-4080 DOOR & MTG GP-CAB, 280-6084 KIT-CAB DOOR & MOUNTING
Type 2
AN ATTACHMENT
i03261486 SEBP4570
2584087 DOOR GP-CAB Parts scheme 2584087 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [2] NUT (M6X1-THD)  
2. 8G-1151 [1] CONNECTOR-HOSE  
3. 322-9633 C [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
4. 129-8542 [2] RETAINER  
5. 129-8545 [2] WASHER (13X40X3-MM THK)  
6. 136-4192 M [1] BOLT (M6X1X35-MM)  
7. 395-0687 [1] SPACER (6.6X12.7X15.9-MM THK)  
8. 206-1345 [2] STRAP-CABLE  
9. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
10. 229-8757 [1] SWITCH AS-LIMIT (DOOR)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
11. 252-1862 J [1] HANDLE AS-PULL  
12. 253-1817 [1] SPACER (6.5X14.5X12-MM THK)  
13. 258-3280 [1] LATCH AS (INNER)  
14. 364-1821 [1] HANDLE AS  
15. 258-3289 [2] LATCH AS (OUTER)  
16. 258-3290 [1] GASKET  
17. 364-1822 [1] HANDLE AS  
18. 258-3298 [1] GROMMET  
19. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
20. 331-8050 [2] BUMPER  
21. 258-4013 [1] BRACKET AS  
  159-9540 M [1] NUT-WELD (M8X1.25-THD)  
22. 258-4014 [1] HINGE (LOWER)  
23. 258-4016 [1] COVER (WIPER)  
24. 258-4073 [1] HINGE (UPPER)  
25. 258-4075 [4] GASKET  
26. 258-4076 [1] HANDLE AS  
27. 258-4081 [1] WINDOW  
28. 258-4082 [1] GASKET  
29. 258-4083 [1] COVER-LATCH  
30. 258-4084 [1] BRACKET  
31. 258-4085 [2] BUSHING  
32. 258-4156 Y [1] HARNESS AS-CAB (DOOR, FRONT)  
33. 330-5011 CY [1] MOTOR GP-WINDOW WIPER (12-VOLT)(CAB DOOR)  
34. 264-4408 [1] ARM GP-WINDOW WIPER (CAB DOOR)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
35. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)(FRONT WIPER/WASHER)  
  111-7899 [1] GASKET  
36. 292-6936 M [1] BOLT (M6X1X70-MM)  
37. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
38. 3S-2093 [2] STRAP-CABLE  
39. 6V-7357 M [4] BOLT (M6X1X25-MM)  
40. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
41. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
42. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 386-6028 E SEAL (329-CM)  
44. 129-3178 M [1] LOCKNUT (M6X1-THD)  
45. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
46. 8S-3193 [2] NUT-PUSH ON  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45700865
 

258-4442: DOOR GP-CAB

258-4442 DOOR GP-CAB
S/N JAY1-UP
PART OF 258-4440 DOOR & MTG GP-CAB, 258-4443 KIT-CAB DOOR & MOUNTING
AN ATTACHMENT
i02858649 SEBP4570
2584442 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8G-1151 [1] CONNECTOR-HOSE  
2. 8Y-4615 [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
3. 129-8542 [2] RETAINER (GLASS MOUNT)  
4. 129-8545 [2] WASHER (13X40X3-MM THK)  
5. 136-4192 M [1] BOLT (M6X1X35-MM)  
6. 154-5423 [1] SPACER (6.6X12.7X17-MM THK)  
7. 206-1345 [2] STRAP-CABLE  
8. 229-8757 [1] SWITCH AS-LIMIT (WIPER)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 252-1862 J [1] HANDLE AS-PULL (PULL)  
10. 253-1817 [1] SPACER (6.5X14.5X12-MM THK)  
11. 258-3280 [1] LATCH AS (INNER)  
12. 258-3288 [1] HANDLE AS (LOWER)  
13. 258-3289 [2] LATCH AS (OUTER)  
14. 258-3290 [1] GASKET  
15. 258-3294 [1] HANDLE AS (UPPER)  
16. 258-3298 [1] GROMMET  
17. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
18. 258-3762 [2] GROMMET  
19. 258-4013 [1] BRACKET AS  
20. 258-4014 [1] HINGE (LOWER)  
21. 258-4016 [1] COVER (WIPER)  
22. 258-4073 [1] HINGE (UPPER)  
23. 258-4075 [4] GASKET  
24. 258-4076 [1] HANDLE AS  
25. 258-4082 [1] GASKET  
26. 258-4083 [1] COVER-LATCH  
27. 258-4084 [1] BRACKET  
28. 258-4085 [2] BUSHING  
29. 258-4156 Y [1] HARNESS AS-CAB (DOOR, FRONT)  
30. 258-4441 [1] GLASS (CLEAR)  
31. 264-4407 [1] MOTOR GP-WINDOW WIPER (CAB DOOR)  
  3F-9556 [1] LOCKWASHER  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  263-3823 [1] CAP-WIPER  
32. 264-4408 [1] ARM GP-WINDOW WIPER (WET)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
33. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)  
  111-7899 [1] GASKET  
34. 292-6936 M [1] BOLT (M6X1X70-MM)  
35. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
36. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
  8C-3334 [1] RIVET-TUBULAR  
37. 129-3178 M [1] LOCKNUT (M6X1-THD)  
38. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
39. 3S-2093 [2] STRAP-CABLE  
40. 5C-2890 M [2] NUT (M6X1-THD)  
41. 6V-7357 M [4] BOLT (M6X1X25-MM)  
42. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
43. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
44. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
45. 258-4430 E SEAL (329-CM)  
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45700866
 

258-4442: DOOR GP-CAB

258-4442 DOOR GP-CAB
S/N JAY2060-UP
PART OF 258-4440 DOOR & MTG GP-CAB
AN ATTACHMENT
i03429810 SEBP4570
2584442 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8G-1151 [1] CONNECTOR-HOSE  
2. 322-9633 C [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
3. 129-8542 [2] RETAINER (MOUNT)  
4. 129-8545 [2] WASHER (13X40X3-MM THK)  
5. 136-4192 M [1] BOLT (M6X1X35-MM)  
6. 395-0687 [1] SPACER (6.6X12.7X15.9-MM THK)  
7. 206-1345 [2] STRAP-CABLE  
8. 229-8757 [1] SWITCH AS-LIMIT (DOOR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 252-1862 J [1] HANDLE AS-PULL  
10. 253-1817 [1] SPACER (6.5X14.5X12-MM THK)  
11. 258-3280 [1] LATCH AS (INNER)  
12. 364-1821 [1] HANDLE AS  
13. 258-3289 [2] LATCH AS (OUTER)  
14. 258-3290 [1] GASKET  
15. 364-1822 [1] HANDLE AS  
16. 258-3298 [1] GROMMET  
17. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
18. 331-8050 [2] BUMPER  
19. 258-4013 [1] BRACKET AS  
  159-9540 M [1] NUT-WELD (M8X1.25-THD)  
20. 258-4014 [1] HINGE (LOWER)  
21. 258-4016 [1] COVER (WIPER)  
22. 258-4073 [1] HINGE (UPPER)  
23. 258-4075 [4] GASKET  
24. 258-4076 [1] HANDLE AS  
25. 258-4082 [1] GASKET  
26. 258-4083 [1] COVER-LATCH  
27. 258-4084 [1] BRACKET  
28. 258-4085 [2] BUSHING  
29. 258-4156 Y [1] HARNESS AS-CAB (DOOR, FRONT)  
30. 258-4441 [1] GLASS (CLEAR)  
31. 330-5011 CY [1] MOTOR GP-WINDOW WIPER (12-VOLT)(CAB DOOR)  
32. 264-4408 [1] ARM GP-WINDOW WIPER (CAB DOOR)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
33. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)(FRONT WIPER, WASHER)  
  111-7899 [1] GASKET  
34. 292-6936 M [1] BOLT (M6X1X70-MM)  
35. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
36. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
37. 129-3178 M [1] LOCKNUT (M6X1-THD)  
38. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
39. 3S-2093 [2] STRAP-CABLE  
40. 5C-2890 M [2] NUT (M6X1-THD)  
41. 6V-7357 M [4] BOLT (M6X1X25-MM)  
42. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
43. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
44. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
45. 398-1530 E SEAL (329-CM)  
46. 8S-3193 [2] NUT-PUSH ON  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45700867
 

380-1727: DOOR GP-CAB

380-1727 DOOR GP-CAB -POLYCARBONATE
S/N JAY1-UP
AN ATTACHMENT
i04689510 SEBP4570
3801727 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 388-8028 [1] SPACER (10X20X6-MM THK)  
3. 388-8018 [2] SPACER (12.7X22X19.1MM THK)  
4. 8T-2444 [2] STUD-BALL  
5. 095-1325 [1] PIN-CLEVIS  
6. 153-2682 [2] SPRING AS-GAS (CAB)  
7. 198-1725 B [6] WASHER-HARD (8.8X25.5X2-M THK)  
8. 206-1345 [4] STRAP-CABLE  
9. 258-3281 [1] BRACKET AS  
10. 258-3725 [1] HINGE  
11. 258-3726 [2] PIN  
12. 258-3761 [1] SPRING AS-GAS (DOOR)  
13. 258-3764 [1] STRIKER AS  
14. 258-4078 [1] TANK AS-WINDOW WASHER  
  6T-1375 [1] PUMP AS-WASHER  
  8E-8293 [1] GROMMET  
  258-3296 [1] CAP-VENTED (WINDOW WASHER TANK)  
15. 258-4141 [2] CLIP  
16. 258-4157 Y [1] HARNESS AS-CAB  
17. 258-4356 [1] BRACKET AS  
18. 284-7932 [1] FILM-NOTICE (ALTERNATE EXIT, READ OMM)  
19. 380-9965 Y [1] DOOR GP-CAB (POLYCARBONATE)  
20. 127-2170 M [4] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
22. 215-6406 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
23. 4E-8722 [1] NUT (RETAINER)  
24. 5P-0372 [4] LOCK PIN  
25. 6L-3966 [3] PIN  
26. 8S-7803 [2] RING-RETAINING  
27. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
28. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
29. 8T-4244 M [1] NUT (M12X1.75-THD)  
30. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
31. 144-0195 E HOSE (84-CM)  
32. 8T-6936 D SEAL (0.1-M EACH)  
33. 388-8019 [5] WASHER (10.5X20X2-MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45700868
 

380-9965: DOOR GP-CAB

380-9965 DOOR GP-CAB -POLYCARBONATE
S/N JAY1-UP
PART OF 380-1727 DOOR GP-CAB
AN ATTACHMENT
i04689569 SEBP4570
3809965 DOOR GP-CAB Parts scheme 3809965 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8G-1151 [1] CONNECTOR-HOSE  
2. 129-8542 [2] RETAINER  
3. 129-8545 [2] WASHER (13X40X3-MM THK)  
4. 136-4192 M [1] BOLT (M6X1X35-MM)  
5. 395-0687 [1] SPACER (6.6X12.7X15.9-MM THK)  
6. 206-1345 [2] STRAP-CABLE  
7. 229-8757 [1] SWITCH AS-LIMIT (DOOR)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
8. 252-1862 J [1] HANDLE AS-PULL  
9. 253-1817 [1] SPACER (6.5X14.5X12-MM THK)  
10. 258-3280 [1] LATCH AS  
11. 258-3289 [2] LATCH AS  
12. 258-3290 [1] GASKET  
13. 258-3298 [1] GROMMET  
14. 258-3697 [1] WASHER-NYLON (7X20X2-MM THK)  
15. 258-4013 [1] BRACKET AS  
16. 258-4014 [1] HINGE (LOWER)  
17. 258-4016 [1] COVER (WIPER)  
18. 258-4073 [1] HINGE (UPPER)  
19. 258-4075 [4] GASKET  
20. 258-4076 [1] HANDLE AS  
21. 258-4082 [1] GASKET  
22. 258-4083 [1] COVER-LATCH  
23. 258-4084 [1] BRACKET  
24. 258-4085 [2] BUSHING  
25. 258-4156 [1] HARNESS AS-CAB (DOOR, FRONT)  
  228-5856 [1] CONNECTOR (10-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  180-9340 [3] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  8L-8413 [5] STRAP-CABLE (WHITE)  
  091-2436 [4] TERMINAL-BLADE (18-GA TO 22-GA)  
  104-1995 [3] TERMINAL-BLADE (14-GA TO 18-GA)  
  8T-2225 E TUBE-HEAT SHRINK (25.4-MM DIA)(7-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
26. 264-4408 [1] ARM GP-WINDOW WIPER (CAB DOOR)  
  305-9194 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
27. 281-6390 [1] SWITCH AS-ROCKER (FRONT WASHER, WIPER)(FRONT WIPER, WASHER)  
  111-7899 [1] GASKET  
28. 292-6936 M [1] BOLT (M6X1X70-MM)  
29. 319-0710 [2] FILM-INSTRUCTION (EGRESS SYSTEM, READ OMM)  
30. 322-9633 [1] BLADE AS-WIPER (400-MM)(CAB DOOR)  
31. 330-5011 Y [1] MOTOR GP-WINDOW WIPER (12-VOLT)(CAB DOOR)  
32. 331-8050 [2] BUMPER  
33. 364-1821 [1] HANDLE AS  
34. 364-1822 [1] HANDLE AS  
35. 380-9966 [1] WINDOW  
36. 115-3069 [1] CLIP AS-CONNECTING (3-PIN)  
  8C-3334 [1] RIVET-TUBULAR  
37. 129-3178 M [1] LOCKNUT (M6X1-THD)  
38. 215-6406 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
39. 3S-2093 [2] STRAP-CABLE  
40. 5C-2890 M [2] NUT (M6X1-THD)  
41. 6V-7357 M [4] BOLT (M6X1X25-MM)  
42. 8C-3798 M [3] BOLT-LOCKING (M6X1X30-MM)  
43. 8S-3193 [2] NUT-PUSH ON  
44. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
45. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
46. 386-6028 E SEAL (329-CM)  
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45700869
 

258-4252: DUCT & FILTER GP-CAB AIR

258-4252 DUCT & FILTER GP-CAB AIR
S/N JAY1-5054
PART OF 258-4260 AIR CONDITIONER AR, 258-4250 HEATER AR-CAB
AN ATTACHMENT
i02614206 SEBP4570
2584252 DUCT & FILTER GP-CAB AIR Parts scheme
  For full view, you need register

Parts for your 246C SKID STEER LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-5947 [2] FASTENER  
2. 146-6371 [6] LOUVER AS  
3. 206-9185 M [1] BOLT (M8X1.25X35-MM)  
4. 258-3727 [7] SCREW-TRUSS HEAD (12-14X0.69-IN)  
5. 258-3793 [1] SEAL  
6. 258-3795 [4] SEAL  
7. 258-3796 [1] SEAL  
8. 258-4248 [1] COVER-LOUVER  
9. 258-4249 [1] DUCT-INLET  
10. 258-4253 [1] DUCT AS (INTERIOR)  
11. 357-8752 [1] DUCT AS (INLET)  
12. 357-8751 [1] DUCT AS (PLENUM)  
13. 258-4263 [1] PLATE  
14. 357-8807 [1] COVER AS  
15. 258-4378 [2] KNOB AS  
16. 258-4379 [1] KNOB AS  
17. 357-8801 [1] SCREEN AS (CAB)  
18. 265-6618 [1] FILTER ELEMENT-CAB AIR (RECIRCULATION)  
19. 265-6619 [1] FILTER ELEMENT-CAB AIR (FRESH)  
20. 163-3955 M [2] BOLT (M6X1X35-MM)  
21. 215-6406 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
22. 258-4254 [1] DUCT AS (INTERIOR)  
23. 258-4259 [1] DUCT AS-OUTLET  
24. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
25. 6V-6689 [2] SCREW-SELF-TAPPING (10-16X.625-IN)  
26. 6V-7357 M [4] BOLT (M6X1X25-MM)  
27. 7X-2031 [3] RETAINER  
28. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6V-9335 D SEAL (0.4-M EACH)  
29A. 6V-9335 D SEAL (0.2-M EACH)  
30. 312-0131 M [4] SCREW-MACHINE (M6X1X30-MM)  
  D   ORDER BY THE METER
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 246C :

DOOR & MTG GP-CAB
258-4080 DOOR & MTG GP-CAB
DOOR & MTG GP-CAB
258-4070 DOOR & MTG GP-CAB
COVER GP-INSTRUMENT PANEL
258-4009 COVER GP-INSTRUMENT PANEL
COVER GP-CONSOLE
258-4314 COVER GP-CONSOLE
COVER GP-CAB
258-4245 COVER GP-CAB
CONTROL GP-JOYSTICK
269-0266 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
269-0265 CONTROL GP-JOYSTICK
CONTROL GP-JOYSTICK
269-0264 CONTROL GP-JOYSTICK
DOOR GP-CAB
258-4086 DOOR GP-CAB
DOOR GP-CAB
258-4086 DOOR GP-CAB
DOOR GP-CAB
258-4087 DOOR GP-CAB
DOOR GP-CAB
258-4087 DOOR GP-CAB
DOOR GP-CAB
258-4442 DOOR GP-CAB
DOOR GP-CAB
258-4442 DOOR GP-CAB
DOOR GP-CAB
380-1727 DOOR GP-CAB
DOOR GP-CAB
380-9965 DOOR GP-CAB

Truck sale:

Caterpillar 246C
 
Caterpillar 246C
- Skid Steer Loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 246CSTD1C, Skid Steer Loaders, Construction
32,900 
Caterpillar 246CSTD1C, Skid Steer Loaders, Construction
- Skid Steer Loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 246C
 
Caterpillar 246C
- Skid Steer Loaders
FINNING CANADA
 
20,931 
Caterpillar 246C, Skid Steer Loaders, Construction
- Skid Steer Loaders
SIME DARBY INDUSTRIAL SDN BHD
Caterpillar 246C HF, Skid Steer Loaders, Construction
40,170 
Caterpillar 246C HF, Skid Steer Loaders, Construction
- Skid Steer Loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.