AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

255-1414 BLADE GP-ANGLING -LOW GROUND PRESSURE S/N JLF1-UP; WWW1-UP; YYY1-UP PART OF 255-1413 BLADE AR-PWR ANGLE & TILT AN ATTACHMENT D5K LGP


WORK TOOLS
BLADE GP

TRACK-TYPE TRACTOR D5K LGP TRACK-TYPE TRACTOR JLF
 D5K XL & LGP Track Type Tractors JLF00001-UP (MACHINE) POWERED BY C4.4 Engine SEBP4572 D5K LGP JLF   (2007)

WORK TOOLS

BLADE GP
BLADE GP-ANGLING
255-1362 BLADE GP-ANGLING
BLADE GP-ANGLING
255-1395 BLADE GP-ANGLING
BLADE GP-ANGLING
255-1414 BLADE GP-ANGLING
BLADE GP-ANGLING
255-1427 BLADE GP-ANGLING
BLADE GP-ANGLING
255-1471 BLADE GP-ANGLING
BLADE GP-ANGLING
255-1487 BLADE GP-ANGLING
 

#SEBP45720710
 

255-1414: BLADE GP-ANGLING

255-1414 BLADE GP-ANGLING -LOW GROUND PRESSURE
S/N JLF1-UP; WWW1-UP; YYY1-UP
PART OF 255-1413 BLADE AR-PWR ANGLE & TILT
AN ATTACHMENT
i02638047 SEBP4572
2551414 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5K LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1421 [3] PIN  
2. 6Y-5838 Y [1] EDGE GP-BIT & CUTTING  
3. 8J-0729 [3] RETAINER  
4. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
5. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
6. 179-5755 [1] CAP-BEARING  
7. 183-5297 B [26] SHIM (0.8-MM THK)  
8. 255-1415 [1] BLADE AS-ANGLING  
9. 225-0098 M [4] BOLT (M20X2.5X140-MM)  
10. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
11. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
12. 7D-1649 [1] WASHER-HARD (13.5X32X5-MM THK)  
13. 7I-3930 [1] BOSS  
14. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45720711
 

255-1427: BLADE GP-ANGLING

255-1427 BLADE GP-ANGLING -XL GRADE CONTROL
S/N JLF1-UP; WWW1-UP; YYY1-UP
PART OF 255-1425 BLADE AR-PWR ANGLE & TILT
AN ATTACHMENT
i02638067 SEBP4572
2551427 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5K LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1421 [3] PIN  
2. 8J-0729 [3] RETAINER  
3. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
4. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
5. 179-5755 [1] CAP-BEARING  
6. 183-5297 B [26] SHIM (0.8-MM THK)  
7. 255-1428 Y [1] EDGE GP-BIT & CUTTING (LEVEL CUT)(LEVEL CUT)  
8. 255-1430 [1] BLADE AS-ANGLING  
9. 225-0098 M [4] BOLT (M20X2.5X140-MM)  
10. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
11. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
12. 7D-1649 [1] WASHER-HARD (13.5X32X5-MM THK)  
13. 7I-3930 [1] BOSS  
14. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45720712
 

255-1471: BLADE GP-ANGLING

255-1471 BLADE GP-ANGLING -LOW GROUND PRESSURE
S/N JLF1-UP; WWW1-UP; YYY1-UP
PART OF 255-1470 BLADE AR-PWR ANGLE & TILT
AN ATTACHMENT
i02638931 SEBP4572
2551471 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5K LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1421 [3] PIN  
2. 8J-0729 [3] RETAINER  
3. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
4. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
5. 179-5755 [1] CAP-BEARING  
6. 183-5297 B [26] SHIM (0.8-MM THK)  
7. 255-1472 Y [1] EDGE GP-BIT & CUTTING (LEVEL CUT)  
8. 255-1475 [1] BLADE AS-ANGLING  
9. 225-0098 M [4] BOLT (M20X2.5X140-MM)  
10. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
11. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
12. 7D-1649 [1] WASHER-HARD (13.5X32X5-MM THK)  
13. 7I-3930 [1] BOSS  
14. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45720713
 

255-1487: BLADE GP-ANGLING

255-1487 BLADE GP-ANGLING -XL GRADE CONTROL
S/N JLF1-UP; WWW1-UP; YYY1-UP
PART OF 255-1486 BLADE AR-PWR ANGLE & TILT
AN ATTACHMENT
i02642309 SEBP4572
2551487 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5K LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1421 [3] PIN  
2. 8J-0729 [3] RETAINER  
3. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
4. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
5. 179-2897 Y [1] EDGE GP-BIT & CUTTING  
6. 179-5755 [1] CAP-BEARING  
7. 183-5297 B [26] SHIM (0.8-MM THK)  
8. 255-1490 [1] BLADE AS-ANGLING  
9. 225-0098 M [4] BOLT (M20X2.5X140-MM)  
10. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
11. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
12. 7D-1649 [1] WASHER-HARD (13.5X32X5-MM THK)  
13. 7I-3930 [1] BOSS  
14. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45720714
 

255-1503: BLADE GP-ANGLING

255-1503 BLADE GP-ANGLING -XL GRADE CONTROL
S/N JLF1-UP; WWW1-UP; YYY1-UP
PART OF 255-1502 BLADE AR-PWR ANGLE & TILT
AN ATTACHMENT
i02639571 SEBP4572
2551503 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5K LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1421 [3] PIN  
2. 8J-0729 [3] RETAINER  
3. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
4. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
5. 179-5755 [1] CAP-BEARING  
6. 183-5297 B [26] SHIM (0.8-MM THK)  
7. 255-1501 Y [1] EDGE GP-BIT & CUTTING  
8. 331-0163 [1] BLADE AS-ANGLING  
9. 225-0098 M [4] BOLT (M20X2.5X140-MM)  
10. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
11. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
12. 7D-1649 [1] WASHER-HARD (13.5X32X5-MM THK)  
13. 7I-3930 [1] BOSS  
14. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45720715
 

255-2370: BLADE GP-ANGLING

255-2370 BLADE GP-ANGLING -LOW GROUND PRESSURE
S/N JLF1-UP; WWW1-UP; YYY1-UP
PART OF 255-2368 BLADE AR-PWR ANGLE & TILT
AN ATTACHMENT
i02639805 SEBP4572
2552370 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5K LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1421 [3] PIN  
2. 6Y-5838 Y [1] EDGE GP-BIT & CUTTING  
3. 8J-0729 [3] RETAINER  
4. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
5. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
6. 179-5755 [1] CAP-BEARING  
7. 183-5297 B [26] SHIM (0.8-MM THK)  
8. 255-2371 [1] BLADE AS-ANGLING  
9. 225-0098 M [4] BOLT (M20X2.5X140-MM)  
10. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
11. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
12. 5C-9553 M [4] BOLT (M6X1X16-MM)  
13. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
14. 7D-1649 [1] WASHER-HARD (13.5X32X5-MM THK)  
15. 7I-3930 [1] BOSS  
16. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45720716
 

255-2373: BLADE GP-ANGLING

255-2373 BLADE GP-ANGLING -XL GRADE CONTROL
S/N JLF1-UP; WWW1-UP; YYY1-UP
PART OF 255-2372 BLADE AR-PWR ANGLE & TILT
AN ATTACHMENT
i02639601 SEBP4572
2552373 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5K LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1421 [3] PIN  
2. 8J-0729 [3] RETAINER  
3. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
4. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
5. 179-5755 [1] CAP-BEARING  
6. 183-5297 B [26] SHIM (0.8-MM THK)  
7. 255-1426 Y [1] EDGE GP-BIT & CUTTING (LEVEL CUT)  
8. 255-2374 [1] BLADE AS-ANGLING  
9. 225-0098 M [4] BOLT (M20X2.5X140-MM)  
10. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
11. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
12. 5C-9553 M [4] BOLT (M6X1X16-MM)  
13. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
14. 7D-1649 [1] WASHER-HARD (13.5X32X5-MM THK)  
15. 7I-3930 [1] BOSS  
16. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45720717
 

255-2376: BLADE GP-ANGLING

255-2376 BLADE GP-ANGLING -LOW GROUND PRESSURE
S/N JLF1-UP; WWW1-UP; YYY1-UP
PART OF 255-2375 BLADE AR-PWR ANGLE & TILT
AN ATTACHMENT
i02639581 SEBP4572
2552376 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5K LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1421 [3] PIN  
2. 6Y-5838 Y [1] EDGE GP-BIT & CUTTING  
3. 8J-0729 [3] RETAINER  
4. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
5. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
6. 179-5755 [1] CAP-BEARING  
7. 183-5297 B [26] SHIM (0.8-MM THK)  
8. 255-2377 [1] BLADE GP-ANGLING  
9. 225-0098 M [4] BOLT (M20X2.5X140-MM)  
10. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
11. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
12. 5C-9553 M [4] BOLT (M6X1X16-MM)  
13. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
14. 7D-1649 [1] WASHER-HARD (13.5X32X5-MM THK)  
15. 7I-3930 [1] BOSS  
16. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45720718
 

255-2379: BLADE GP-ANGLING

255-2379 BLADE GP-ANGLING -XL GRADE CONTROL
S/N JLF1-UP; WWW1-UP; YYY1-UP
PART OF 255-2378 BLADE AR-PWR ANGLE & TILT
AN ATTACHMENT
i02638099 SEBP4572
2552379 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5K LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1421 [3] PIN  
2. 8J-0729 [3] RETAINER  
3. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
4. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
5. 179-5755 [1] CAP-BEARING  
6. 183-5297 B [26] SHIM (0.8-MM THK)  
7. 255-1428 Y [1] EDGE GP-BIT & CUTTING (LEVEL CUT)(LEVEL CUT)  
8. 255-2380 [1] BLADE GP-ANGLING  
9. 225-0098 M [4] BOLT (M20X2.5X140-MM)  
10. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
11. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
12. 5C-9553 M [4] BOLT (M6X1X16-MM)  
13. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
14. 7D-1649 [1] WASHER-HARD (13.5X32X5-MM THK)  
15. 7I-3930 [1] BOSS  
16. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45720719
 

255-2383: BLADE GP-ANGLING

255-2383 BLADE GP-ANGLING -LOW GROUND PRESSURE
S/N JLF1-UP; WWW1-UP; YYY1-UP
PART OF 255-2381 BLADE AR-PWR ANGLE & TILT
AN ATTACHMENT
i02638297 SEBP4572
2552383 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D5K LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-1421 [3] PIN  
2. 8J-0729 [3] RETAINER  
3. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
4. 150-0352 [4] SPACER (38.30X44.45X27.3-MM THK)  
5. 179-5755 [1] CAP-BEARING  
6. 183-5297 B [26] SHIM (0.8-MM THK)  
7. 255-1472 Y [1] EDGE GP-BIT & CUTTING (LEVEL CUT)  
8. 255-2384 [1] BLADE AS-ANGLING  
9. 225-0098 M [4] BOLT (M20X2.5X140-MM)  
10. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
11. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
12. 5C-9553 M [4] BOLT (M6X1X16-MM)  
13. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
14. 7D-1649 [1] WASHER-HARD (13.5X32X5-MM THK)  
15. 7I-3930 [1] BOSS  
16. 8T-4194 M [1] BOLT (M12X1.75X50-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D5K LGP :

BLADE GP-ANGLING
255-1395 BLADE GP-ANGLING
BLADE GP-ANGLING
255-1362 BLADE GP-ANGLING
312-8360 BLADE AR-PWR ANGLE & TILT
312-8350 BLADE AR-PWR ANGLE & TILT
255-2393 BLADE AR-PWR ANGLE & TILT
255-2390 BLADE AR-PWR ANGLE & TILT
255-2385 BLADE AR-PWR ANGLE & TILT
255-2381 BLADE AR-PWR ANGLE & TILT
BLADE GP-ANGLING
255-1427 BLADE GP-ANGLING
BLADE GP-ANGLING
255-1471 BLADE GP-ANGLING
BLADE GP-ANGLING
255-1487 BLADE GP-ANGLING
BLADE GP-ANGLING
255-1503 BLADE GP-ANGLING
BLADE GP-ANGLING
255-2370 BLADE GP-ANGLING
BLADE GP-ANGLING
255-2373 BLADE GP-ANGLING
BLADE GP-ANGLING
255-2376 BLADE GP-ANGLING
BLADE GP-ANGLING
255-2379 BLADE GP-ANGLING

Truck sale:

Caterpillar D5K LGP
 
Caterpillar D5K LGP
- Crawler dozers
TRACTOR & EQUIPMENT CO.
Caterpillar D5KLGP, Crawler dozers, Construction
85,000 
Caterpillar D5KLGP, Crawler dozers, Construction
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.
Caterpillar D5KLGPA, Crawler dozers, Construction
135,000 
Caterpillar D5KLGPA, Crawler dozers, Construction
- Crawler dozers
RIGGS CAT
Caterpillar D5KLGP
 
Caterpillar D5KLGP
- Crawler dozers
CARTER MACHINERY COMPANY, INC.
 
 
Caterpillar D5K LGP
- Crawler dozers
YANCEY BROS. CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.