ELECTRICAL AND STARTING SYSTEM
HEATER GPLIGHTING GP
STARTING MOTOR GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
HEATER GP
#SEBP45810060
300-2799: HEATER GP-JACKET WATER
For full view, you need register
Parts for your 305D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP45810061
300-2799: HEATER GP-JACKET WATER
For full view, you need register
Parts for your 305D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [2] | STRAP-CABLE | |
| 2. | 321-6069 C | [1] | CORD AS-HEATER ELEMENT (120-VOLT) | |
| 3. | 321-6070 C | [1] | HEATER AS | |
| 270-6187 | [1] | GASKET | ||
| 4. | 335-9077 C | [1] | HARNESS AS-WIRING | |
| 8T-8737 | [3] | PLUG-SEAL | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP45810062
233-0099: LAMP GP-FLOOD
233-0099 LAMP GP-FLOOD -BOOM
12-VOLT
PART OF 292-5739 LIGHTING GP-FLOOD
ALSO AN ATTACHMENT
12-VOLT
PART OF 292-5739 LIGHTING GP-FLOOD
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 305D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP45810063
352-0006: LIGHTING AR-FLOOD
352-0006 LIGHTING AR-FLOOD -BOOM
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 305D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP45810064
266-6843: LIGHTING GP-FLOOD
266-6843 LIGHTING GP-FLOOD -CAB
PART OF 367-7048 DISTRIBUTION AR
CANNOT BE USED WITH CANOPY
AN ATTACHMENT
PART OF 367-7048 DISTRIBUTION AR
CANNOT BE USED WITH CANOPY
AN ATTACHMENT
For full view, you need register
Parts for your 305D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP45810065
292-5739: LIGHTING GP-FLOOD
292-5739 LIGHTING GP-FLOOD -BOOM
PART OF 343-5219 BOOM AR, 352-0006 LIGHTING AR-FLOOD
ALSO AN ATTACHMENT
PART OF 343-5219 BOOM AR, 352-0006 LIGHTING AR-FLOOD
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 305D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 233-0099 Y | [1] | LAMP GP-FLOOD (12-VOLT)(BOOM) | |
| 3. | 292-5740 | [1] | PLATE | |
| 4. | 5P-1076 | [1] | WASHER-HARD (13.5X30X4-MM THK) | |
| 5. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 6. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45810066
344-3208: LIGHTING GP-FLOOD
For full view, you need register
Parts for your 305D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [9] | STRAP-CABLE | |
| 2. | 7I-2673 | [1] | STRAP-CABLE | |
| 3. | 163-6795 | [3] | STRAP-CABLE | |
| 4. | 198-0852 | [1] | LAMP GP-FLOOD (12-VOLT) | |
| 142-9572 | [1] | LAMP (12-VOLT, 55-WATT) | ||
| 5. | 282-9134 | [1] | BRACKET AS | |
| 6. | 352-0043 | [1] | HARNESS AS-LIGHTING (CANOPY) | |
| 8T-8730 | [1] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 7Y-3966 | [1] | TERMINAL AS | ||
| 7Y-3962 | [1] | TERMINAL-BULLET (MALE) | ||
| 7Y-3964 | [1] | TUBE (CONNECTOR TERMINAL) | ||
| 7Y-3967 | [1] | TERMINAL AS | ||
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [1] | TUBE (RECEPTACLE TERMINAL) | ||
| 9W-0844 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 7. | 4P-7581 | [1] | CLIP (LADDER) | |
| 8. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 10. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| M | METRIC PART | |||
#SEBP45810067
280-3736: STARTING MOTOR GP-ELECTRIC
280-3736 STARTING MOTOR GP-ELECTRIC
PART OF 344-3163 ENGINE AR-PRIMARY
PART OF 344-3163 ENGINE AR-PRIMARY
For full view, you need register
Parts for your 305D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 280-3784 | [1] | STARTING MOTOR AS |
#SEBP45810068
267-4942: WIRING GP-CONSOLE
267-4942 WIRING GP-CONSOLE -RH
PART OF 344-1529, 344-1530 CONTROL AR-AUXILIARY
AN ATTACHMENT
PART OF 344-1529, 344-1530 CONTROL AR-AUXILIARY
AN ATTACHMENT
For full view, you need register
Parts for your 305D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 7I-2673 | [1] | STRAP-CABLE | |
| 3. | 267-4926 | [1] | SWITCH AS-ROCKER (AUXILIARY HYDRAULIC, ENABLE) | |
| 111-7899 | [1] | GASKET | ||
| 4. | 340-4084 | [1] | HARNESS AS-VALVE | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
#SEBP45810069
345-1609: WIRING GP-CONSOLE
For full view, you need register
Parts for your 305D CR MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 3S-2093 | [8] | STRAP-CABLE | |
| 3. | 4D-1836 | [1] | SWITCH-TOGGLE (ENGINE SHUTDOWN) | |
| 4. | 7K-1181 | [24] | STRAP-CABLE | |
| 5. | 8X-5804 | [1] | STRAP AS-GROUND | |
| 6. | 093-2064 | [1] | GROMMET | |
| 7. | 109-2356 | [5] | PLUG | |
| 8. | 119-9896 | [1] | TIMER AS (GLOW PLUG) | |
| 9. | 163-6795 | [1] | STRAP-CABLE | |
| 10. | 266-1404 | [1] | SWITCH AS-ROCKER (12-VOLT)(LIGHT) | |
| 11. | 266-1405 | [1] | SWITCH AS-ROCKER (TRAVEL SPEED) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 12. | 266-3807 | [1] | MONITOR GP-OPERATOR | |
| 13. | 266-6935 | [1] | RELAY AS (12-VOLT)(ENGINE SHUTOFF) | |
| 13A. | 266-6935 | [1] | RELAY AS (12-VOLT)(MAIN) | |
| 14. | 266-6936 | [1] | CONTROL AS-TIMER (ENGINE SHUTOFF) | |
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 15. | 266-7379 | [1] | STRAP-CABLE | |
| 16. | 267-7058 | [1] | SWITCH AS-LIMIT (HYDRAULIC LOCKOUT) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 17. | 283-5312 | [1] | HARNESS AS-SWITCH (BOOM SWING, HYD LOCKOUT, START) | |
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 8T-8730 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 18. | 362-0288 | [1] | KIT-SERVICE METER | |
| (INCLUDES METER & FILM) | ||||
| 19. | 306-9039 | [1] | COVER AS-PROTECTION | |
| 20. | 322-8964 | [1] | SWITCH AS-START (KEY)(ENGINE) | |
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4507 | [1] | RECEPTACLE AS-CONNECTOR (4-PIN) | ||
| 21. | 344-3176 | [1] | BRACKET AS | |
| 22. | 356-8817 | [1] | BRACKET AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 23. | 352-0046 | [1] | HARNESS AS-CONSOLE | |
| 231-7924 | [1] | BOX AS-FUSE | ||
| 231-9122 | [1] | BASE | ||
| 170-6888 | [1] | PULLER-FUSE | ||
| 111-7898 | [5] | CONNECTOR (8-PIN) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 7Y-3957 | [3] | CONNECTOR-PLUG (4-PIN) | ||
| 7Y-3958 | [2] | CONNECTOR-PLUG (6-PIN) | ||
| 111-4816 | [1] | PLUG-CONNECTOR (13-PIN) | ||
| 153-2602 | [3] | RECEPTACLE-CONNECTOR (1-PIN) | ||
| 124-3548 | [2] | FUSE (30-AMPERE) | ||
| 113-8490 | [7] | FUSE (10-AMPERE) | ||
| 113-8491 | [3] | FUSE (15-AMPERE) | ||
| 141-2759 | [4] | FUSE (5-AMPERE) | ||
| 8T-8729 | [19] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [5] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 230-5008 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 264-7031 | [1] | SEAL-CONNECTOR | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 231-2295 | [2] | PLUG AS-CONNECTOR (8-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7033 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [24] | PLUG-SEAL | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 243-4505 | [4] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 267-7076 | [1] | RESISTOR AS | ||
| 8T-8730 | [50] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3S-2093 | [8] | STRAP-CABLE | ||
| 122-4401 | [6] | TERMINAL | ||
| 233-8699 | [10] | TERMINAL | ||
| 233-8701 | [3] | TERMINAL | ||
| 233-8702 | [2] | TERMINAL | ||
| 249-6899 | [4] | TERMINAL | ||
| 7Y-3966 | [1] | TERMINAL AS | ||
| 7Y-3962 | [1] | TERMINAL-BULLET (MALE) | ||
| 7Y-3964 | [1] | TUBE (CONNECTOR TERMINAL) | ||
| 7Y-3967 | [3] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [1] | TUBE (RECEPTACLE TERMINAL) | ||
| 2L-8074 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 272-4848 | [2] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 272-4850 | [1] | TERMINAL-RING | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM) | |||
| 272-6304 | [2] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| [1] | TERMINAL-RING | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM) | |||
| 112-9611 | [11] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 128-7714 | [4] | TERMINAL | ||
| 7Y-3951 | [23] | TERMINAL-BLADE (14-GA) | ||
| 102-7965 | [12] | TERMINAL (FEMALE) | ||
| 153-2631 | [3] | TERMINAL (14-GA TO 20-GA) | ||
| 3E-9179 | [3] | TERMINAL-RECEPTACLE (14-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(105-CM) | |||
| 24. | 355-1864 | [1] | BRACKET AS | |
| 6V-9632 M | [3] | NUT-WELD (M6X1-THD) | ||
| 8T-8874 M | [3] | NUT-WELD (M5X0.8-THD) | ||
| 25. | 356-8806 | [1] | PLATE AS | |
| 26. | 067-3045 | [2] | CLIP (LOOP) | |
| 27. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 28. | 119-9895 | [1] | RELAY (12-VOLT)(GLOW PLUG) | |
| 29. | 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 30. | 239-1182 | [1] | RELAY AS (12-VOLT)(HORN) | |
| 31. | 250-2048 | [1] | RELAY AS (12-VOLT)(NEUTRAL START) | |
| 32. | 4P-7581 | [1] | CLIP (LADDER) | |
| 33. | 5C-9553 M | [5] | BOLT (M6X1X16-MM) | |
| 34. | 5P-4116 | [6] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 35. | 6D-4244 | [1] | CLIP (LOOP) | |
| 36. | 7C-4354 | [1] | CLIP | |
| 37. | 8M-2770 | [1] | CLIP (LOOP) | |
| 38. | 8T-0287 M | [2] | BOLT (M5X0.8X10-MM) | |
| 39. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 40. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 42. | 8T-4171 M | [6] | BOLT (M6X1X12-MM) | |
| 43. | 8T-4200 M | [10] | BOLT (M8X1.25X16-MM) | |
| 44. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 45. | 9X-8256 | [11] | WASHER (6.6X12X2-MM THK) | |
| 46. | 356-8819 | [1] | PLATE | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
HEATER GP
Operation and Maintenance Manual
Caterpillar Parts SIS Catalog 305D CR :
Truck sale:
33,873
