AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

215-9097 CYLINDER GP-HYDRAULIC -BOOM S/N 5321-UP 130-MM (5.1-IN) BORE X 1372-MM (54-IN) STROKE PART OF 282-3014 CYLINDER & MTG GP-BOOM, 217-9701 CYLINDER AR-HYDRAULIC AN ATTACHMENT 532


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP

TRACK FELLER BUNCHER 532 TRACK FELLER BUNCHER 532
 532 Track Feller Buncher 53200001-UP (MACHINE) POWERED BY C-9 Engine SEBP4587 532 532   (2005)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BOOM
322-3568 CYLINDER GP-BOOM
CYLINDER GP-HOOD TILT
251-8281 CYLINDER GP-HOOD TILT
CYLINDER GP-HYDRAULIC
215-9097 CYLINDER GP-HYDRAULIC
CYLINDER GP-STICK
215-9092 CYLINDER GP-STICK
CYLINDER GP-TILT
222-9149 CYLINDER GP-TILT
CYLINDER GP-TILT
254-5457 CYLINDER GP-TILT
 

#SEBP45870350
 

215-9097: CYLINDER GP-HYDRAULIC

215-9097 CYLINDER GP-HYDRAULIC -BOOM
S/N 5321-UP
130-MM (5.1-IN) BORE X 1372-MM (54-IN) STROKE
PART OF 282-3014 CYLINDER & MTG GP-BOOM, 217-9701 CYLINDER AR-HYDRAULIC
AN ATTACHMENT
i01851695 SEBP4587
2159097 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4620 [1] HEAD  
2. 7Y-4631 [1] RING-RETAINING  
3. 087-5005 [1] STOP  
4. 128-9260 [1] BUSHING  
5. 147-5851 [1] PISTON  
6. 147-5852 J [1] RING  
7. 147-5853 J [1] RING  
8. 167-2476 [1] SEAL-WIPER  
9. 215-9099 [1] CYLINDER AS-BOOM  
  7Y-5128 [1] BUSHING  
10. 215-9108 [1] ROD AS  
  7Y-5128 [1] BUSHING  
11. 095-0929 [2] RING-RETAINING  
12. 095-1631 J [1] SEAL-O-RING  
13. 103-8378 [1] RING-RETAINING  
14. 103-8379 [1] RING  
15. 103-8380 [1] STOP  
16. 150-5884 J [1] RING  
17. 150-5885 J [1] SEAL-BUFFER  
18. 6I-6784 J [1] RING-SEAL  
19. 7Y-4622 [1] LOCKNUT (SPECIAL)  
20. 7Y-4628 J [1] RING (BACKUP)  
21. 167-2327 [1] SEAL-U-CUP  
22. 7Y-4633 J [1] RING-BACKUP  
23. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
24. 9X-3595 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  165-9419 J [1] KIT-SEAL  
    (INCLUDES SEALS & RINGS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP45870351
 

215-9092: CYLINDER GP-STICK

215-9092 CYLINDER GP-STICK
S/N 5321-UP
130-MM (5.1-IN) BORE X 1219-MM (48-IN) STROKE
PART OF 282-3013 CYLINDER & MTG GP-STICK, 217-9701 CYLINDER AR-HYDRAULIC
AN ATTACHMENT
i01851809 SEBP4587
2159092 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4620 [1] HEAD  
2. 7Y-4631 [1] RING-RETAINING  
3. 087-5005 [1] STOP  
4. 128-9260 [1] BUSHING  
5. 147-5851 [1] PISTON  
6. 147-5852 [1] RING  
7. 147-5853 [1] RING  
8. 167-2476 [1] SEAL-WIPER  
9. 215-9093 [1] CYLINDER AS-STICK  
  7Y-5128 [1] BUSHING  
10. 215-9095 [1] ROD AS  
  7Y-5128 [1] BUSHING  
11. 095-0929 [2] RING-RETAINING  
12. 095-1631 [1] SEAL-O-RING  
13. 103-8378 [1] RING-RETAINING  
14. 103-8379 [1] RING  
15. 103-8380 [1] STOP  
16. 150-5884 [1] RING  
17. 150-5885 [1] SEAL-BUFFER  
18. 6I-6784 [1] RING-SEAL  
19. 7Y-4622 [1] LOCKNUT (SPECIAL)  
20. 7Y-4628 [1] RING (BACKUP)  
21. 167-2327 [1] SEAL-U-CUP  
22. 7Y-4633 [1] RING-BACKUP  
23. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
24. 9X-3595 [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  165-9419 [1] KIT-SEAL  
    (INCLUDES SEALS & RINGS)
  M   METRIC PART
 

#SEBP45870352
 

222-9149: CYLINDER GP-TILT

222-9149 CYLINDER GP-TILT -SIDE, FOR CAB LEVELING
S/N 5321-UP
177.8-MM (7-IN) BORE X 231.9-MM (9.1-IN) STROKE
PART OF 224-9037 CYLINDER & LINES GP-TILT
i01860967 SEBP4587
2229149 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 5J-4997 J [1] SEAL AS  
  5J-4995 [1] RING-EXPANDER  
3. 8C-9101 J [1] RING-WEAR  
4. 8M-4228 J [1] RING-WEAR  
5. 096-4443 [2] SEAL-LIP TYPE  
6. 096-9512 [1] BUSHING  
7. 167-2209 J [1] SEAL AS-BUFFER  
8. 225-3285 J [1] SEAL-WIPER  
9. 229-0328 [1] TUBE AS  
10. 229-0330 [1] ROD AS  
11. 229-0332 [1] HEAD  
12. 229-0333 [1] PISTON  
13. 229-0335 [2] BEARING  
14. 230-4560 J [1] SEAL-O-RING  
15. 230-4562 J [1] RING-BACKUP  
16. 167-2320 J [1] SEAL-U-CUP  
17. 6V-6707 J [1] SEAL-O-RING  
18. 3H-8430 [2] SETSCREW (3/8-16X0.75-IN)  
19. 4D-6419 [8] WASHER-HARD (24X40X5-MM THK)  
20. 8D-3886 [1] RING-RETAINING  
21. 8L-4638 [8] BOLT (7/8-9X2.5-IN)  
   
    AVAILABLE REPAIR KIT(S):
  229-0334 J [1] KIT-SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP45870353
 

254-5457: CYLINDER GP-TILT

254-5457 CYLINDER GP-TILT -SAW
S/N 5321-UP
130-MM (5.1-IN) BORE X 1060.5-MM (41.8-IN) STROKE
PART OF 217-9701 CYLINDER AR-HYDRAULIC
AN ATTACHMENT
i02096424 SEBP4587
2545457 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4620 [1] HEAD  
2. 7Y-4631 [1] RING-RETAINING  
3. 087-5005 [1] STOP  
4. 128-9260 [1] BUSHING  
5. 147-5852 J [1] RING  
6. 147-5853 J [1] RING  
7. 165-9288 J [1] SEAL-LIP TYPE  
8. 215-9053 [1] CYLINDER AS  
8A. 7Y-5128 [1] BUSHING  
9. 254-5467 [1] ROD AS  
9A. 7Y-5128 [1] BUSHING  
10. 254-5470 [1] PISTON  
11. 095-0929 [2] RING-RETAINING  
12. 095-1631 J [1] SEAL-O-RING  
13. 103-8378 [1] RING-RETAINING  
14. 103-8379 [1] RING  
15. 103-8380 [1] STOP  
16. 150-5884 J [1] RING  
17. 150-5885 J [1] SEAL-BUFFER  
18. 7Y-4622 [1] LOCKNUT (SPECIAL)  
19. 6I-6784 J [1] RING-SEAL  
20. 7Y-4628 J [1] RING (BACKUP)  
21. 216-0004 [1] SEAL-U-CUP  
22. 7Y-4633 J [1] RING-BACKUP  
23. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
24. 495-8200 [1] RING AS-SEAL  
   
    AVAILABLE REPAIR KIT(S):
  165-9419 J [1] KIT-SEAL (CYLINDER)  
    (ALSO INCLUDES U-CUP SEAL & SEAL AS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP45870354
 

274-7480: CYLINDER GP-TILT

274-7480 CYLINDER GP-TILT -SAW
S/N 5321-UP
130-MM (5.1-IN) BORE X 1076.5-MM (42.4-IN) STROKE
PART OF 282-3152 CYLINDER & MTG GP-SAW
AN ATTACHMENT
i02438933 SEBP4587
2747480 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-1351 [1] STOP  
2. 7I-1353 [1] HEAD  
3. 495-8200 J [1] RING AS-SEAL (DIA 130-BORE)  
4. 093-1571 [1] RING-RETAINING  
5. 096-1588 J [1] RING-BACKUP  
6. 103-8378 [1] RING-RETAINING  
7. 103-8379 [1] RING  
8. 103-8380 [1] STOP  
9. 147-5852 J [1] RING  
10. 147-5853 J [1] RING  
11. 167-2212 J [1] SEAL AS-BUFFER  
12. 274-7481 [1] ROD AS  
12A. 7Y-5128 [1] BUSHING  
13. 274-7483 [1] PISTON  
14. 277-3225 [1] CYLINDER AS  
14A. 7Y-5128 [1] BUSHING  
15. 095-0929 [2] RING-RETAINING  
16. 095-1631 J [1] SEAL-O-RING  
17. 114-0758 J [1] BUSHING  
18. 150-5884 J [1] RING  
19. 165-9287 J [1] SEAL-LIP TYPE  
20. 167-2325 J [1] SEAL-U-CUP  
21. 7Y-4622 [1] LOCKNUT (SPECIAL)  
22. 7I-1352 J [1] RING-SEAL  
23. 7Y-4633 J [1] RING-BACKUP  
24. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
   
    AVAILABLE REPAIR KIT(S):
  344-6336 J [1] KIT-HYD CYLINDER SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP45870355
 

282-9611: CYLINDER GP-TILT

282-9611 CYLINDER GP-TILT -REAR, FOR CAB LEVELING
S/N 5321-UP
PART OF 224-9037 CYLINDER & LINES GP-TILT
i02423188 SEBP4587
2829611 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 5J-4997 J [1] SEAL AS  
  5J-4995 [1] RING-EXPANDER  
3. 8C-9101 J [1] RING-WEAR  
4. 8M-4228 J [1] RING-WEAR  
5. 155-3537 [2] BEARING  
6. 167-2209 J [1] SEAL AS-BUFFER  
7. 225-3285 J [1] SEAL-WIPER  
8. 229-0329 [1] TUBE AS  
9. 229-0332 [1] HEAD  
10. 229-0333 [1] PISTON  
11. 230-4560 J [1] SEAL-O-RING  
12. 230-4562 J [1] RING-BACKUP  
13. 282-9612 [1] ROD AS  
14. 067-3161 [4] RING-RETAINING  
15. 167-2320 J [1] SEAL-U-CUP  
16. 3H-8430 [2] SETSCREW (3/8-16X0.75-IN)  
17. 4D-6419 [8] WASHER-HARD (24X40X5-MM THK)  
18. 6V-6707 J [1] SEAL-O-RING  
19. 8D-3886 [1] RING-RETAINING  
20. 8L-4638 [8] BOLT (7/8-9X2.5-IN)  
   
    AVAILABLE REPAIR KIT(S):
  229-0334 J [1] KIT-SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP45870356
 

217-9689: DRIVE AR-SWING

217-9689 DRIVE AR-SWING
S/N 5321-UP
PART OF 272-0057 HYDRAULIC AR
Type 1
i01844169 SEBP4587
2179689 DRIVE AR-SWING Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-2273 [1] VALVE AS-SHUTOFF (SWING DRIVE OIL DRAIN)  
  6V-7238 [1] VALVE-SHUTOFF  
  3K-0360 [1] SEAL-O-RING  
2. 2B-7561 [2] CORK  
3. 5D-1026 [2] CLAMP-BAND  
4. 096-4755 [1] PIN  
5. 220-8623 Y [1] DRIVE GP-SWING  
6. 221-5390 I [1] HOSE AS  
7. 221-5391 I [1] HOSE AS  
8. 5P-0767 E HOSE (76-CM)  
9. 1P-3702 [4] SEAL-RECTANGULAR  
10. 168-9860 [1] PLUG  
11. 112-3929 M [16] BOLT (M24X3X100-MM)  
12. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
13. 7Y-0336 [16] SPACER (24.5X44X24-MM THK)  
14. 8T-9403 [8] FLANGE-HALF  
15. 8T-4182 M [16] BOLT (M10X1.5X45-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45870357
 

217-9689: DRIVE AR-SWING

217-9689 DRIVE AR-SWING
S/N 5321-UP
PART OF 272-0057 HYDRAULIC AR
Type 2
i03942210 SEBP4587
2179689 DRIVE AR-SWING Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-2273 [1] VALVE AS-SHUTOFF (SWING DRIVE OIL DRAIN)  
  6V-7238 [1] VALVE-SHUTOFF  
  3K-0360 [1] SEAL-O-RING  
2. 2B-7561 [2] CORK  
3. 5D-1026 [2] CLAMP-BAND  
4. 096-4755 [1] PIN  
5. 220-8623 Y [1] DRIVE GP-SWING  
6. 221-5390 I [1] HOSE AS  
7. 221-5391 I [1] HOSE AS  
9. 1P-3702 [4] SEAL-RECTANGULAR  
10. 168-9860 [1] PLUG  
11. 112-3929 M [16] BOLT (M24X3X100-MM)  
12. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
13. 7Y-0336 [16] SPACER (24.5X44X24-MM THK)  
15. 8T-4182 M [16] BOLT (M10X1.5X45-MM)  
16. 8T-9403 [8] FLANGE-HALF  
17. 5P-0767 E HOSE (76-CM)  
18. 322-8716 CY [1] VALVE GP-SWING CUSHION (FINE SWING)  
19. 148-8364 C [1] ELBOW AS  
  6V-8625 [1] ELBOW  
  6V-8398 [1] SEAL-O-RING  
  3K-0360 [1] SEAL-O-RING  
20. 7Y-8109 C [1] BRACKET AS  
21. 8T-4178 CM [6] BOLT (M10X1.5X90-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45870358
 

201-7808: DRIVE GP-SWING

201-7808 DRIVE GP-SWING
S/N 5321-UP
PART OF 220-8623 DRIVE GP-SWING
i01496667 SEBP4587
2017808 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
2. 227-6221 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
3. 165-2273 [1] VALVE AS-SHUTOFF (HYDRAULIC OIL)  
  3K-0360 [1] SEAL-O-RING  
  6V-7238 [1] VALVE-SHUTOFF  
4. 7I-7728 [1] CARRIER-PLANETARY  
5. 7Y-0225 [3] SHAFT-PLANETARY  
6. 093-1730 [2] RING-RETAINING  
7. 093-1731 [1] RING-RETAINING  
8. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
9. 094-1528 [8] WASHER (53X84X1-MM THK)  
10. 096-2653 [1] RING-RETAINING  
11. 114-1383 [4] SHAFT-PLANETARY  
12. 114-1401 [1] COVER-HOUSING  
13. 169-5617 [1] GEAR-SUN (18-TEETH)  
14. 169-5618 [3] GEAR-PLANETARY (27-TEETH)  
15. 171-9280 [1] GEAR-RING (72-TEETH)  
16. 171-9283 [1] GEAR-SUN (24-TEETH)  
17. 171-9375 [1] SEAL-O-RING  
18. 191-2579 [1] CARRIER-PLANETARY  
19. 191-2694 [1] SHAFT-PINION  
20. 191-2695 [1] HOUSING  
21. 191-2696 [1] CAGE  
22. 191-2697 [1] SPACER (110X140X90.1-MM THK)  
23. 7Y-1115 [1] PIPE-GAUGE  
24. 093-2357 [1] GAUGE-OIL LEVEL (DIPSTICK) (HYDRAULIC OIL)  
25. 095-0891 [7] PIN-SPRING  
26. 135-9044 [2] SEAL-LIP TYPE  
27. 136-2904 [1] BEARING  
28. 136-2940 [1] BEARING  
29. 1U-8846 B SEALANT-GASKET  
30. 7Y-0252 [3] BEARING AS-ROLLER  
31. 191-2513 [8] BEARING AS-ROLLER  
32. 7Y-1434 [2] SPACER (40X69.5X6-MM THK)  
33. 8J-8879 [1] SEAL-O-RING  
34. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
35. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 8T-6385 M [16] BOLT (M16X2X180-MM)  
37. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP45870359
 

220-8623: DRIVE GP-SWING

220-8623 DRIVE GP-SWING
S/N 5321-UP
PART OF 217-9689 DRIVE AR-SWING
Type 1
i02148101 SEBP4587
2208623 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-1513 Y [1] MOTOR & MTG GP-SWING  
2. 201-7808 Y [1] DRIVE GP-SWING  
3. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
4. 8T-6404 [1] SEAL-O-RING  
5. 8T-4944 M [4] BOLT-SOCKET HEAD (M16X2X40-MM)  
6. 6V-5204 [1] RING-RETAINING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Tilt Cylinder Bearings - Lubricate
511, 521, 522 and 532 Track Feller Bunchers
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-Americas
Specifications
Hood Tilt Cylinder
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Boom Cylinder
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Stick Cylinder
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Tilt Cylinder (Side for Cab Leveling)
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Tilt Cylinder (Rear for Cab Leveling)
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Tilt Cylinder (Saw) - Felling Head
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
Service Letter-Asia
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING HOOD TILT CYLINDERS ON CERTAIN TK711, TK721, TK722, 511, 521, 522, 1190, AND 1190T TRACK FELLER BUNCHERS
Testing and Adjusting
Boom Cylinder Drift - Check
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Stick Cylinder Drift - Check
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Tilt Cylinder Drift - Check
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Cylinder Speed - Check
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Relief Valve (Line) - Test and Adjust
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Tilt Cylinder (Saw) - Remove and Install
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Stick Cylinder - Remove and Install
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Boom Cylinder - Remove and Install
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Tilt Cylinder (Side for Cab Leveling) - Remove and Install
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Service Magazine
Grinding the Mount for the Hood Tilt Cylinder May Improve Service Life {5104, 7251}
2006/08/14
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

Caterpillar Parts SIS Catalog 532 :

CYLINDER GP-HOOD TILT
251-8281 CYLINDER GP-HOOD TILT
CYLINDER GP-BOOM
322-3568 CYLINDER GP-BOOM
CYLINDER AR-HYDRAULIC
248-6874 CYLINDER AR-HYDRAULIC
CYLINDER AR-HYDRAULIC
248-6874 CYLINDER AR-HYDRAULIC
CYLINDER AR-HYDRAULIC
217-9701 CYLINDER AR-HYDRAULIC
CYLINDER AR-HYDRAULIC
217-9701 CYLINDER AR-HYDRAULIC
CYLINDER AR-HYDRAULIC
217-9701 CYLINDER AR-HYDRAULIC
CYLINDER & MTG GP-STICK & SAW
282-3109 CYLINDER & MTG GP-STICK & SAW
CYLINDER GP-STICK
215-9092 CYLINDER GP-STICK
CYLINDER GP-TILT
222-9149 CYLINDER GP-TILT
CYLINDER GP-TILT
254-5457 CYLINDER GP-TILT
CYLINDER GP-TILT
274-7480 CYLINDER GP-TILT
CYLINDER GP-TILT
282-9611 CYLINDER GP-TILT
DRIVE AR-SWING
217-9689 DRIVE AR-SWING
DRIVE AR-SWING
217-9689 DRIVE AR-SWING
DRIVE GP-SWING
201-7808 DRIVE GP-SWING

Truck sale:

CATERPILLAR 532 2008
$119,500 USD 
CATERPILLAR 532 2008
- FORESTRY - FELLER BUNCHERS
PETERSON MACHINERY CO.
CATERPILLAR 532 2010
 
CATERPILLAR 532 2010
- FOREST MACHINE
N C MACHINERY
- Billings - United States
2010 CAT 532
USD $239,500 
2010 CAT 532

PETERSON CAT
Portland, Oregon
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.