AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

291-1126 HEAD GP-MOTOR S/N 5321-UP PART OF 279-9874, 320-2394 MOTOR GP-TRAVEL 532 TRACK FELLER BUNCHER


HYDRAULIC SYSTEM
MOTOR GP
PUMP GP
HYDRAULIC GP

TRACK FELLER BUNCHER 532 TRACK FELLER BUNCHER 532
 532 Track Feller Buncher 53200001-UP (MACHINE) POWERED BY C-9 Engine SEBP4587 532 532   (2005)

HYDRAULIC SYSTEM

MOTOR GP
DRIVE GP-TRAVEL MOTOR & FINAL
318-9123 DRIVE GP-TRAVEL MOTOR & FINAL
HEAD GP-MOTOR
291-1126 HEAD GP-MOTOR
206-1513 MOTOR & MTG GP-SWING
MOTOR & MTG GP-SWING
281-6404 MOTOR & MTG GP-SWING
MOTOR & MTG GP-SWING
281-6404 MOTOR & MTG GP-SWING
 

#SEBP45870370
 

291-1126: HEAD GP-MOTOR

291-1126 HEAD GP-MOTOR
S/N 5321-UP
PART OF 279-9874, 320-2394 MOTOR GP-TRAVEL
i02992824 SEBP4587
2911126 HEAD GP-MOTOR Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-1384 [1] PLUG  
2. 6V-8352 [1] SEAL-O-RING  
3. 120-4394 [6] PLUG-BREAK OFF  
4. 209-9719 [3] PLUG AS  
5. 142-1382 [1] PISTON  
6. 192-2893 [1] HEAD  
7. 081-3959 [1] PLUG AS  
  126-9093 [1] SEAL  
8. 139-7757 [5] PLUG  
9. 123-5798 [1] SEAT  
10. 192-3292 [1] PIN  
11. 123-5799 [1] SEAT  
12. 9T-3853 M [1] LOCKNUT (M6X1-THD)  
13. 107-3117 [1] SEAL-O-RING  
14. 095-9804 M [4] BOLT-SOCKET HEAD (M12X1.75X110-MM)  
15. 194-6973 Y [1] VALVE GP-BRAKE (PRESSURE RELEASE)  
16. 142-1383 [1] PIN-TRUNNION  
17. 194-6972 [2] PIN  
18. 095-9232 M [2] BOLT-SOCKET HEAD (M12X1.75X95-MM)  
19. 8C-8729 M [2] BOLT-SOCKET HEAD (M12X1.75X80-MM)  
20. 194-6982 J [2] VALVE GP-RELIEF (CROSSOVER)  
21. 190-9752 [1] PLUG AS  
22. 291-1122 Y [1] VALVE GP-FLOW CONTROL (TRAVEL MOTOR)  
23. 192-3293 Y [2] VALVE GP-CHECK & RELIEF (TRAVEL MOTOR)  
24. 191-2708 [1] VALVE AS-SHUTTLE (TRAVEL BRAKE)  
25. 192-2900 [1] PISTON-CONTROL  
26. 192-2895 [1] ADAPTER-BUSHING  
27. 123-5791 [1] SPRING  
28. 194-6970 [1] PLUG-ADAPTER  
29. 194-6971 [1] RETAINER  
30. 178-2841 [1] SETSCREW  
31. 3J-1907 [1] SEAL-O-RING  
32. 9S-8004 [1] PLUG (9/16-18-THD)  
   
    AVAILABLE REPAIR KIT(S):
  194-6983 J [1] KIT-SEAL (RELIEF VALVE)  
    (INCLUDES SEALS, RINGS & NUT)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45870371
 

270-4694: HEAD GP-PUMP

270-4694 HEAD GP-PUMP -MAIN HYDRAULIC
S/N 5321-UP
PART OF 268-6729 PUMP GP-PISTON
AN ATTACHMENT
i02308579 SEBP4587
2704694 HEAD GP-PUMP Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-2530 [2] COVER  
1A. 5I-4338 [2] PIN  
1B. 6E-3283 M [2] LOCKNUT (M12X1.75-THD)  
1C. 4J-5573 [2] SEAL-O-RING  
1D. 8T-2503 M [8] BOLT-SOCKET HEAD (M14X2X35-MM)  
1E. 123-7562 [2] SEAL-O-RING  
1F. 9T-3929 [2] PLUG AS  
    (EACH INCLUDES)
  6E-5479 [1] SEAL  
2. 270-3521 Y [1] VALVE GP-PUMP CONTROL (PRESSURE COMPENSATOR)  
3. 177-2523 [1] HOUSING  
4. 177-2524 [1] GASKET  
5. 177-2525 [2] PISTON  
6. 177-2526 [2] ROD  
7. 268-3003 [2] SPACER  
8. 177-2528 [2] SPRING  
9. 247-8946 [2] PISTON  
10. 124-9884 [2] PIN-THREADED  
11. 7X-2553 M [2] BOLT (M16X2X40-MM)  
12. 247-8947 [4] RING  
13. 8T-2393 M [8] BOLT-SOCKET HEAD (M16X2X60-MM)  
14. 3E-8008 M [4] BOLT-SOCKET HEAD (M16X2X90-MM)  
15. 159-7666 [2] DOWEL  
16. 120-4394 [1] PLUG-BREAK OFF  
17. 123-2017 [1] PLUG-BREAK OFF  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45870372
 

308-4488: HEAD GP-PUMP

308-4488 HEAD GP-PUMP -MAIN HYDRAULIC
S/N 532177-UP
PART OF 308-0094 PUMP GP-PISTON
i02878643 SEBP4587
3084488 HEAD GP-PUMP Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-2521 Y [2] COVER GP-PUMP  
2. 308-4489 Y [1] VALVE GP-PUMP CONTROL (PRESSURE COMPENSATOR)  
3. 177-2523 [1] HOUSING  
4. 177-2524 [1] GASKET  
5. 177-2525 [2] PISTON  
6. 177-2526 [2] ROD  
7. 268-3003 [2] SPACER  
8. 177-2528 [2] SPRING  
9. 247-8946 [2] PISTON  
10. 124-9884 [2] PIN-THREADED  
11. 7X-2553 M [2] BOLT (M16X2X40-MM)  
12. 247-8947 [4] RING  
13. 8T-2393 M [8] BOLT-SOCKET HEAD (M16X2X60-MM)  
14. 3E-8008 M [4] BOLT-SOCKET HEAD (M16X2X90-MM)  
15. 159-7666 [2] DOWEL  
16. 120-4394 [1] PLUG-BREAK OFF  
17. 123-2017 [1] PLUG-BREAK OFF  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45870373
 

272-0057: HYDRAULIC AR

272-0057 HYDRAULIC AR
S/N 5321-176
PART OF 272-0050 COMMON AR
i02424076 SEBP4587
2720057 HYDRAULIC AR Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-9689 Y [1] DRIVE AR-SWING  
2. 217-9690 Y [1] PUMP & LINES GP-HYD TANK FILL  
3. 217-9692 Y [1] LINES GP-RETURN  
4. 217-9693 Y [1] TILT GP-HOOD  
5. 217-9695 Y [1] VALVE & LINES GP-TRAVEL CONT (WITH TILT FUNCTION)  
6. 272-0058 Y [1] LINES GP-PILOT  
7. 275-7941 Y [1] LINES GP-PUMP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP45870374
 

272-0057: HYDRAULIC AR

272-0057 HYDRAULIC AR
S/N 532177-UP
PART OF 272-0050 COMMON AR
Type 1
i02891443 SEBP4587
2720057 HYDRAULIC AR Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-9689 Y [1] DRIVE AR-SWING  
2. 217-9690 Y [1] PUMP & LINES GP-HYD TANK FILL  
3. 217-9692 Y [1] LINES GP-RETURN  
4. 217-9693 Y [1] TILT GP-HOOD  
5. 217-9695 Y [1] VALVE & LINES GP-TRAVEL CONT (WITH TILT FUNCTION)  
6. 272-0058 Y [1] LINES GP-PILOT  
7. 275-7941 Y [1] LINES GP-PUMP  
8. 308-0095 CY [1] PUMP & MTG GP-MAIN HYDRAULIC  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP45870375
 

272-0057: HYDRAULIC AR

272-0057 HYDRAULIC AR
S/N 532177-UP
PART OF 272-0050 COMMON AR
Type 2
i03090646 SEBP4587
2720057 HYDRAULIC AR Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-9689 Y [1] DRIVE AR-SWING  
2. 217-9690 Y [1] PUMP & LINES GP-HYD TANK FILL  
3. 217-9692 Y [1] LINES GP-RETURN  
4. 317-5827 CY [1] LINES GP-HOOD TILT  
5. 217-9695 Y [1] VALVE & LINES GP-TRAVEL CONT (WITH TILT FUNCTION)  
6. 272-0058 Y [1] LINES GP-PILOT  
7. 275-7941 Y [1] LINES GP-PUMP  
8. 308-0095 Y [1] PUMP & MTG GP-MAIN HYDRAULIC  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP45870376
 

284-5616: HYDRAULIC AR

284-5616 HYDRAULIC AR
S/N 5321-UP
CANNOT BE USED WITH @@@@@212-8010@@@@@, @@@@@252-8713@@@@@
AN ATTACHMENT
i02785776 SEBP4587
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  282-3014 Y [1] CYLINDER & MTG GP-BOOM  
  282-3101 Y [1] LINES GP-FRONT (BOOM, STICK)  
  256-0350 Y [1] LINES GP-SAW  
  217-9700 Y [1] PUMP & MTG GP-MAIN HYDRAULIC (FELLING HEAD)  
    S/N 5321-176
  285-2268 Y [1] VALVE & MTG GP-MAIN CONTROL (7-BANK)  
   
  259-1068 [1] FILM-INSTRUCTION (JOYSTICK CONTROL, PATTERN 1)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP45870377
 

282-3068: HYDRAULIC AR-HARVESTER

282-3068 HYDRAULIC AR-HARVESTER -WITHOUT LINKAGE
S/N 5321-176
CANNOT BE USED WITH @@@@@282-3069@@@@@, @@@@@212-8010@@@@@, @@@@@252-8717@@@@@
AN ATTACHMENT
i02444229 SEBP4587
2823068 HYDRAULIC AR-HARVESTER Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-9697 Y [1] VALVE & MTG GP-MAIN CONTROL (7-BANK)  
2. 217-9700 Y [1] PUMP & MTG GP-MAIN HYDRAULIC (FELLING HEAD)  
3. 223-0671 Y [1] CONTROL & MTG GP-JOYSTICK (HARVESTER HEAD)  
4. 282-3014 Y [1] CYLINDER & MTG GP-BOOM  
5. 282-3064 Y [1] LINES GP-FRONT (BOOM CYL, HARVESTER HEAD)  
6. 283-2529 Y [1] PUMP & MTG GP-SAW  
  Y   SEPARATE ILLUSTRATION
 

#SEBP45870378
 

282-3068: HYDRAULIC AR-HARVESTER

282-3068 HYDRAULIC AR-HARVESTER -WITHOUT LINKAGE
S/N 532177-UP
CANNOT BE USED WITH @@@@@282-3069@@@@@, @@@@@212-8010@@@@@, @@@@@252-8717@@@@@
AN ATTACHMENT
i02778923 SEBP4587
2823068 HYDRAULIC AR-HARVESTER Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-9697 Y [1] VALVE & MTG GP-MAIN CONTROL (7-BANK)  
2. 283-2529 Y [1] PUMP & MTG GP-SAW  
3. 223-0671 Y [1] CONTROL & MTG GP-JOYSTICK (HARVESTER HEAD)  
4. 282-3014 Y [1] CYLINDER & MTG GP-BOOM  
5. 282-3064 Y [1] LINES GP-FRONT (BOOM CYL, HARVESTER HEAD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP45870379
 

282-3068: HYDRAULIC AR-HARVESTER

282-3068 HYDRAULIC AR-HARVESTER -WITHOUT LINKAGE
S/N 532177-180
CANNOT BE USED WITH @@@@@282-3069@@@@@, @@@@@212-8010@@@@@, @@@@@252-8717@@@@@
AN ATTACHMENT
i03940477 SEBP4587
2823068 HYDRAULIC AR-HARVESTER Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-9697 Y [1] VALVE & MTG GP-MAIN CONTROL (7-BANK)  
2. 265-7988 C [1] FILM-INSTRUCTION (HARVESTER HEAD CONTROL)  
3. 282-3014 Y [1] CYLINDER & MTG GP-BOOM  
4. 282-3064 Y [1] LINES GP-FRONT (BOOM CYL, HARVESTER HEAD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Valve Plates for Some Hydraulic Motors May Have Poor Surface Finishes{5058}
Valve Plates for Some Hydraulic Motors May Have Poor Surface Finishes{5058}
Specifications
Swing Motor
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Hydraulic Tank Fill Pump and Motor
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Travel Motor
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Travel Motor Head
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
Service Letter-Asia
Systems Operation
Travel Motor
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Head (Travel Motor)
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Swing Motor
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Parking Brake
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Swing System
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Travel System
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING CROSS OVER TUBES AND ORIFICES AT THE SWIVEL ON CERTAIN 1190, 1190T, 511, 521, 522, AND 532 TRACK FELLER BUNCHERS
Testing and Adjusting
Travel Motor Case Drain Oil - Measure
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Swing Speed and Overswing on Level Ground - Check
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Disc Saw Performance - Test and Adjust
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Machine Drift on a Slope - Check
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Swing Speed and Swing Drift on a Slope - Check
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Travel Motor Head - Test and Adjust
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Relief Valve (Line for Travel Motor) - Test and Adjust
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Travel Motor Brake Release Pressure - Test and Adjust
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Travel on Level Ground - Test and Adjust
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Swing Motor Case Drain Oil - Measure
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Swing Motor Relief Valve Pressure - Test and Adjust
511 Track Feller Buncher, 521
Track Feller Buncher, 522
Track Feller Buncher and 532
Track Feller Buncher Machine Systems
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Travel Motor - Disassemble
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Travel Motor - Assemble
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Swing Motor - Disassemble
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Swing Motor - Assemble
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Swing Motor - Remove
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Travel Motor - Remove
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Swing Motor - Install
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Travel Motor - Install
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Service Magazine
Adapters Have Been Used on Travel Motors {4351, 5058}
2006/12/11

Caterpillar Parts SIS Catalog 532 :

GAUGE GP-SIGHT
347-6081 GAUGE GP-SIGHT
GAUGE GP-SIGHT
227-0620 GAUGE GP-SIGHT
FILTER GP-OIL
289-8194 FILTER GP-OIL
FILTER GP-OIL
222-7092 FILTER GP-OIL
FILTER GP-OIL
126-2075 FILTER GP-OIL
FILTER & VALVE GP-PILOT
188-2084 FILTER & VALVE GP-PILOT
FILTER & VALVE GP-PILOT
158-8987 FILTER & VALVE GP-PILOT
FILTER & VALVE GP-PILOT
158-8987 FILTER & VALVE GP-PILOT
HEAD GP-PUMP
270-4694 HEAD GP-PUMP
HEAD GP-PUMP
308-4488 HEAD GP-PUMP
HYDRAULIC AR
272-0057 HYDRAULIC AR
HYDRAULIC AR
272-0057 HYDRAULIC AR
HYDRAULIC AR
272-0057 HYDRAULIC AR
284-5616 HYDRAULIC AR
HYDRAULIC AR-HARVESTER
282-3068 HYDRAULIC AR-HARVESTER
HYDRAULIC AR-HARVESTER
282-3068 HYDRAULIC AR-HARVESTER

Truck sale:

CATERPILLAR 532 2008
$119,500 USD 
CATERPILLAR 532 2008
- FORESTRY - FELLER BUNCHERS
PETERSON MACHINERY CO.
CATERPILLAR 532 2010
 
CATERPILLAR 532 2010
- FOREST MACHINE
N C MACHINERY
- Billings - United States
2010 CAT 532
USD $239,500 
2010 CAT 532

PETERSON CAT
Portland, Oregon
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.